Recent developments in the area of microfabrication technologies, has enabled the fabrication of many radio frequency/microwave components with better performance and lower cost than possible with semiconductor based fabrication technology. Many of these microfabricated RF components such as switches and phase shifters, popularly known as RF MEMS, are aimed at reducing the insertion loss and improving other performance parameters such as linearity. For these devices size miniaturization is not necessarily important, as in practical subsystems, these components are integrated with RF front-ends on a laminate. This thesis deals with concepts of a low cost passive phase shifter fabricated in-situ on a microwave laminate. The operation of this Mesoscale Electrostatically actuated Phase shifter on microwave Laminate (MEPL) is similar to that of a micromachined distributed MEMS transmission line (DMTL) phase shifter. In spite of advantages of low losses, wide bandwidth, low DC power consumption and high linearity over semiconductor/MMIC technology, microfabricated phase shifters are often not used in field because of issues related to fabrication reliability, packaging and integration. On the other hand, the proposed MEPL will have all the advantages of conventional MEMS phase shifters with additional benefit of lower cost. Furthermore, these are integrable to form a monolithic phased array. A MEPL phase shifter of 50-bridges periodically distributed on the co-planar waveguide (CPW) transmission line is demonstrated in this thesis. MEMS air bridges are electrostatically actuated to vary the capacitance of the transmission line, which changes the phase velocity of the propagation RF signal, consequently phase at the output port. The realized MEPL is characterized for electromagnetic as well as electromechanical performance. The electromechanical characterization of this device is performed using a Laser Doppler Vibrometer (LDV). The measured data showed good agreement with the analytical data.. Major application of a phase shifter is in a phased array antenna system. MEPL is particularly suited for a monolithic phase array antenna. The proposed monolithic phased array antenna system fabrication approach utilizes extremely simple and economical modern printed circuit board technology to pattern the conventional microwave laminate and copper foil. A complete monolithic phased array antenna system is fabricated on a microwave laminate using an embedded phase shifter operating with electrostatic principles. Other components such as DC block and bias tee are integrated into the CPW-microstrip transitions to optimize the space and performance. Integrated phased array antenna is fabricated and tested to demonstrate the beam steering capability. Measured S11 is better than -15dB at the operating frequency of 9.8GHz. The beam steering capability is shown as proof of concept by showing the beam scan angle of 10deg with bias voltage of 125V. The mesoscale phase shifter demonstrated in this thesis has several advantages compared to micromachined phase shifters. The proposed fabrication approach does not use metal deposition/patterning process, which removes the need of high cost clean room and sophisticated films deposition equipments. Secondly, as there are no thin films used, stiction is not expected on phase shifters fabricated with this approach. Since this approach uses thicker metal films, the power handling capability is expected to be significantly higher than micromachined phase shifters. Since conventional phased array antenna system components are fabricated on a microwave laminate, micro machined phase shifters realized on semiconductor substrates are required to be packaged separately before integrating with such phased array circuits. Packaging of the micro-machined RF-MEMS/MEMS devices is still a major issue and contributes to a substantial part of the total cost. Unlike micromachined phase shifters which are required to be packaged and then embedded in phased array applications, device presented in this thesis is packaged in-situ. Compared to similar monolithic phased array antenna reported on silicon substrate which are limited by wafer size, these arrays can be easily extended for larger arrays on microwave laminate as these are available in large size. To summarize, the proposed fabrication approach for phase shifters overcomes many limitations of micromachined components for microwave applications while retaining most of their advantages compared to other existing approaches based on ferrites or semiconductor technologies.

This thesis presents an introduction to the design and simulation of a novel class of integrated photonic phased array switch elements. The main objective is to use nano-electromechanical (NEMS) based phase shifters of cascaded under-etched slot nanowires that are compact in size and require a small amount of power to operate them. The structure of the switch elements is organized such that it brings the phase shifting elements to the exterior sides of the photonic circuits. The transition slot couplers, used to interconnect the phase shifters, are designed to enable biasing one of the silicon beams of each phase shifter from an electrode located at the side of the phase shifter. The other silicon beam of each phase shifter is biased through the rest of the silicon structure of the switch element, which is taken as a ground. Phased array switch elements ranging from 2×2 up to 8×8 multiple-inputs/multiple-outputs (MIMO) are conveniently designed within reasonable footprints native to the current fabrication technologies. Chapter one presents the general layout of the various designs of the switch elements and demonstrates their novel features. This demonstration will show how waveguide disturbances in the interconnecting network from conventional switch elements can be avoided by adopting an innovative design. Some possible applications for the designed switch elements of different sizes and topologies are indicated throughout the chapter. Chapter two presents the design of the multimode interference (MMI) couplers used in the switch elements as splitters, combiners and waveguide crossovers. Simulation data and design methodologies for the multimode couplers of interest are detailed in this chapter. Chapter three presents the design and analysis of the NEMS-operated phase shifters. Both simulations and numerical analysis are utilized in the design of a 0º-180º capable NEMS-operated phase shifter. Additionally, the response of some of the designed photonic phased array switch elements is demonstrated in this chapter. An executive summary and conclusions sections are also included in the thesis.

Microwave Photonics(MWP) has been defined as the study of photonic devices which operate at microwave frequencies and also their applications to microwave and optical systems. One or more electrical signals at microwave frequencies are transported over the optic link ,with electrical to optical and optical to electrical conversion on the transmission and receiving side respectively. The key advantages of microwave photonic links over conventional electrical transmission systems such as coaxial cables or waveguides ,includes reduced size, weight and cost, immunity to electromagnetic interference ,low dispersion and high data transfer capacity. Integrated Optics is the name given to a new generation of opto-electronic systems in which the familiar wires and cables are replaced by light-waveguiding optical fibers, and conventional integrated circuits are replaced by optical integrated circuits (OICs).Microwave Photonics with photonic integration can add the benefits of reduction in system size, losses, short path lengths leading to more efficient cost effective systems. In this thesis, a new approach for using 1-D linear arrays of curved waveguides as delay lines is presented. We propose a design for a passive phase shifter obtained by curved waveguide delay lines. The modulated RF signal obtains the phase shift in the optical domain which is transferred to the RF signal by heterodyning techniques .This phase shift is independent of the RF frequency and hence the Beam squinting which occurs in the conventional RF phase shifter systems is avoided in the proposed system. Switching between different lengths of the bent/curved waveguides can produce variable phase shifts ranging from 0 to 2 radians. The use of curved waveguides for delay generation and optimization of various parameters are the main topics of the research problem. The need for delay line is large and most of these were implemented previously using long optical fiber cables. More precise delays could be obtained by using waveguide delay lines as compared to fiber delay lines. Waveguides paves way for design in smaller dimensions ranging from m to nm in integrated optics. The differential phase shift for a signal propagating in a waveguide from waveguide theory is given as which clearly indicates that the differential phase shifts could be obtained in accordance with differential path lengths Δl with β as the propagation constant. S-bend waveguide sections of different lengths along with straight waveguide as reference for each section are employed. The phase delay is passively obtained by a differential path length change, where various phase shift values can be obtained by switching between different differential path lengths. Since the optical phase delay generated is in- dependent of the input RF frequency. A shift in the RF frequency, at the input will not change the phase or beam pointing angle when the phase shifter is employed for beam pointing in case of Phased Array Antenna applications. A 1-bit phase shifter is the firrst step in the design which could be further extended to n-bit phase shifter. Here 1-bit or n-bit ,is one where n can take any integer value. Each bit is composed of a reference phase signal pathway and a delayed phase signal pathway. When the optical signal goes every single bit through the reference phase the phase shift is ‘0’ radians ,the other is through the delayed path which is . For every n-bit, 2n delays can be obtained. For the 1-bit,2 delays are obtained. Switching between the path lengths is done using the directional coupler switches. Th optimization of different parameters of the S-bend waveguide delay line has been realized and studied. The design and optimisation of a 1-bit optical RF phase shifter is discussed which could be extended to n-bit phase shifters. These S-bends are studied analytically. Beam Propagation Method (BPM)is employed for modeling and simulation of the proposed device. An interferometric configuration is considered for practical measurement of optical phase. In this configuration the phase change is translated into amplitude or intensity measurement. One of the arms of the Maczehdner Interferometer has no path length change while the other arm has an S-bend structure which provides the path length difference as compared to the reference path, and hence produces the necessary phase shift at the output of the interferometer as required. By changing the path length difference between the two arms of the interferometer ,a change in intensity is produced at the output of the interferometer. In this study, integrated optic curved waveguide delay line phase shifters are designed and analyzed, considering the Titanium Di used Lithium Niobate Technology. This is because it has good electro-optic properties necessary for designing switches used for switching between delay segments. Practical parameters that can be fabricated are employed in the design and simulation studies reported here. Fabrication is also done using the Lithium Niobate Technology. However the fabrication studies are excluded from the main stream, as further fabrication studies are necessary to realise the actual devices de- signed. The fabrication aspects are left as scope for further development. The fabricated devices are shown as appendix to the thesis. Organisation of the thesis Chapter 1 gives the introduction to the fields of Microwave Photonics and Integrated optics and its applications. Chapter 2discusses the curved waveguide theory and design with coverage of materials and methods employed in the proposed system. Chapter 3 discusses the different types of delay lines and the design of the 1-bit phase shifter which can be extended to the design of a n-bit phase shifter with both analytical and simulation results. Chapter 4 discusses the method of phase measurement for the n-bit phase shifter and the possible applications where the phase shifter could be employed. Chapter 5 discusses conclusions and future work in the proposed area of work. Appendix A discusses the loss calculations for the Cosine S-bend waveguide. Appendix B gives the fabrication details. The references form the end part of the thesis.

This thesis presents an introduction to the design and simulation of a novel class of integrated photonic phased array switch elements. The main objective is to use nano-electromechanical (NEMS) based phase shifters of cascaded under-etched slot nanowires that are compact in size and require a small amount of power to operate them. The structure of the switch elements is organized such that it brings the phase shifting elements to the exterior sides of the photonic circuits. The transition slot couplers, used to interconnect the phase shifters, are designed to enable biasing one of the silicon beams of each phase shifter from an electrode located at the side of the phase shifter. The other silicon beam of each phase shifter is biased through the rest of the silicon structure of the switch element, which is taken as a ground. Phased array switch elements ranging from 2×2 up to 8×8 multiple-inputs/multiple-outputs (MIMO) are conveniently designed within reasonable footprints native to the current fabrication technologies. Chapter one presents the general layout of the various designs of the switch elements and demonstrates their novel features. This demonstration will show how waveguide disturbances in the interconnecting network from conventional switch elements can be avoided by adopting an innovative design. Some possible applications for the designed switch elements of different sizes and topologies are indicated throughout the chapter. Chapter two presents the design of the multimode interference (MMI) couplers used in the switch elements as splitters, combiners and waveguide crossovers. Simulation data and design methodologies for the multimode couplers of interest are detailed in this chapter. Chapter three presents the design and analysis of the NEMS-operated phase shifters. Both simulations and numerical analysis are utilized in the design of a 0º-180º capable NEMS-operated phase shifter. Additionally, the response of some of the designed photonic phased array switch elements is demonstrated in this chapter. An executive summary and conclusions sections are also included in the thesis.

Most of today’s microwave circuits are designed for specific function and specialneed. There is a growing trend to have flexible and reconfigurable circuits. Circuitsthat can be digitally programmed to achieve various functions based on specific needs. Realization of high frequency circuit blocks that can be dynamically reconfigured toachieve the desired performance seems to be challenging. However, with recentadvances in many areas of technology these demands can now be met. Two concepts have been investigated in this thesis. The initial part presents thefeasibility of a flexible and programmable circuit (PROMFA) that can be utilized formultifunctional systems operating at microwave frequencies. Design details andPROMFA implementation is presented. This concept is based on an array of genericcells, which consists of a matrix of analog building blocks that can be dynamicallyreconfigured. Either each matrix element can be programmed independently or severalelements can be programmed collectively to achieve a specific function. The PROMFA circuit can therefore realize more complex functions, such as filters oroscillators. Realization of a flexible RF circuit based on generic cells is a new concept.In order to validate the idea, a test chip has been fabricated in a 0.2μm GaAs process, ED02AH from OMMICTM. Simulated and measured results are presented along withsome key applications like implementation of a widely tunable band pass filter and anactive corporate feed network. The later part of the thesis covers the design and implementation of tunable andwideband highly linear LNAs that can be very useful for multistandard terminals suchas software defined radio (SDR). One of the key components in the design of a flexibleradio is low noise amplifier (LNA). Considering a multimode and multiband radiofront end, the LNA must provide adequate performance within a large frequency band.Optimization of LNA performance for a single frequency band is not suitable for thisapplication. There are two possible solutions for multiband and multimode radio frontends (a) Narrowband tunable LNAs (b) Wideband highly linear LNAs. A dual bandtunable LNA MMIC has been fabricated in 0.2μm GaAs process. A self tuningtechnique has also been proposed for the optimization of this LNA. This thesis alsopresents the design of a novel highly linear current mode LNA that can be used forwideband RF front ends for multistandard applications. Technology process for thiscircuit is 90nm CMOS.

Les systèmes de communications sans fils actuels imposent des contraintes très sévères en termes de la capacité du canal, la qualité de transmission tout en gardant les niveaux d'interférences et multi-trajets assez faibles. De telles contraintes ont rendu les antennes multifaisceaux un élément essentiel dans ces systèmes. Parmi les techniques permettant de réaliser une antenne multifaisceaux (sans avoir recours aux systèmes à balayages électroniques), un réseau d'antennes élémentaires est associé à un réseau d'alimentation (une matrice) à formation de faisceau (Beam Forming Network-BFN). Parmi les différents types de ces matrices, la matrice de Butler a reçu une attention particulière. Ceci est dû au fait qu'elle est théoriquement sans pertes et qu'elle emploie un nombre minimum de composants (coupleurs et déphaseurs) afin de générer l'ensemble de faisceaux orthogonaux demandé (avec l'hypothèse que le nombre de faisceau est une puissance de 2). Néanmoins, la matrice de Butler a un problème de conception majeur. Ce problème réside dans la structure de la matrice qui renferme des croisements ce qui a été adressé par différents travaux de recherches dans la littérature. Les Guide Intégré au Substrat (GIS) offrent des caractéristiques intéressants pour la conception des composants microondes et millimétriques faciles à intégrer sur un même support avec d'autres composants planaires. Les composants à base de GIS combinent les avantages des guides d'ondes rectangulaires, comme leur grand facteur de qualité Q, leur faibles pertes tout en étant compatible avec les technologies à faibles coûts comme le PCB et le LTCC. Vus ses caractéristiques attrayants, la technologie GIS devient un bon candidat pour la réalisation des matrices multifaisceaux faciles à intégrer avec d'autres systèmes en technologies planaires ou à base de guide GIS. Dans cette thèse, de nouveaux composants passifs sont développés en exploitant la technologie GIS en multicouches en vue de la réalisation d'une matrice de Butler 4x4 compacte et large bande. Les composants recherchés sont donc des coupleurs et des déphaseurs ayant des performances large bande en termes des amplitudes des coefficients de transmissions et les phases associés tout en gardant de faibles niveaux de pertes et de bonnes isolations. Différents techniques pour l'implémentation de déphaseurs large bande en technologie GIS sont présentés. Une nouvelle structure à base d'une propagation composite : main gauche main droite (Composite Right/Left- Handed, CRLH) dans un guide d'onde est proposée. La structure consiste d'un guide d'onde monocouche ayant des fenêtres inductives et des fentes transversales à réactances capacitives pour synthétiser l'inductance parallèle et la capacité série main gauche, respectivement. La structure est adaptée pour les réalisations de déphaseurs compacts en technologie GIS. Bien que les pertes d'insertions restent dans le même ordre de grandeur de celles des structures CRLH à base d'éléments non-localisés, ces niveaux de pertes restent relativement grands par rapport aux applications nécessitant plusieurs déphaseurs. Les déphaseurs à bases de GIS ayant des longueurs égales et des largeurs variables sont ensuite abordés. Ce type de déphaseur est effectivement très adapté à la technologie GIS qui permet des réalisations de parcours avec différentes formes (parcours droits, courbés, coudés, ..) tout en assurant des différences de phase large bande. Afin de satisfaire de faibles pertes d'insertions pour une large dynamique de phase, la longueur de ces déphaseurs est en compromis avec les variations progressives des différentes largeurs associées aux valeurs de déphasages requises. Une transition large bande, double couche et à faible perte est ainsi proposée. La transition est analysée à partir de son circuit électrique équivalent afin d'étudier les performances en termes de l'amplitude et la phase du coefficient de transmission par rapport aux différents paramètres structurels de la transition. Cette transition est ensuite exploitée pour développer un déphaseur à trois couches, large bande, en GIS. La structure consiste effectivement d'un guide d'onde replié à plusieurs reprises sur luimême selon la longueur dans une topologie trois couches à faibles pertes. De nouveaux coupleurs double couche en GIS sont également proposés. Pour les applications BFNs, une structure originale d'un coupleur large bande est développée. La structure consiste de deux guides d'onde parallèles qui partagent leur grand mur ayant une paire de fentes inclinées et décalées par rapport au centre de la structure. Une étude paramétrique détaillée est faite pour étudier l'impact des différents paramètres des fentes sur l'amplitude et la phase du coefficient de transmission. Le coupleur proposé a l'avantage d'assurer une large dynamique de couplage ayant des performances larges bandes en termes des amplitudes et les phases des coefficients de transmission avec de faibles pertes et de bonnes isolations entre le port d'entré et celui isolé. D'autre part, contrairement à d'autres travaux antérieurs et récents qui souffraient d'une corrélation directe entre la phase en transmission et le niveau de couplage, la structure proposée permet de contrôler le niveau de couplage en maintenant presque les mêmes valeurs de phase en transmission pour différents niveaux de couplage. Ceci le rend un bon candidat pour les BFNs déployant différents coupleurs telle la matrice de Nolen. Une deuxième structure originale d’un coupleur bibande est également proposée. La structure consiste de deux coupleurs concentriques en guide nervuré intégré au substrat avec un motif innovant de démultiplexage à base de GIS. Ce coupleur a été développé conjointement avec M. Tarek Djerafi de l’Ecole Polytechnique de Montréal dans un cadre de collaboration avec le Prof. Ke Wu. Finalement, pour l'implémentation de la matrice de Butler, la topologie double couche est explorée à deux niveaux. Le premier consiste à optimiser les caractéristiques électriques de la matrice, tandis que le second concerne l'optimisation de la surface occupée afin de rendre la matrice la plus compacte possible sans dégrader ses performances électriques. D'une part, la structure double couche présente une solution intrinsèque au problème de croisement permettant ainsi une plus grande flexibilité pour la compensation de phase sur une large bande de fréquence. Ceci est réalisé par une conception adéquate de la surface géométrique sur chaque couche de substrat et optimiser les différentes sections de GIS avec les différents parcours adoptés. La deuxième étape consiste effectivement à optimiser la surface sur chaque couche en profitant de la technologie GIS. Ceci consiste à réaliser des murs latéraux communs entre différents chemin électrique de la matrice en vue d'une compacité optimale. Les deux prototypes de matrices de Butler 4x4 sont optimisés, fabriqués et mesurés. Les résultats de mesures sont en bon accord avec ceux de la simulation. Des niveaux d'isolations mieux que - 15 dB avec des niveaux de réflexions inférieurs à -12 dB sont validés expérimentalement sur plus de 24% de bande autour de 12.5 GHz. Les coefficients de transmission montrent de faibles dispersions d'environ 1 dB avec une moyenne de -6.8 dB, et 10° par rapport aux valeurs théoriques, respectivement, sur toute la bande de fréquence. / Multibeam antennas have become a key element in nowadays wireless communication systems where increased channel capacity, improved transmission quality with minimum interference and multipath phenomena are severe design constraints. These antennas are classified in two main categories namely adaptive smart antennas and switched-beam antennas. Switched-beam antennas consist of an elementary antenna array connected to a Multiple Beam Forming Network (M-BFN). Among the different M-BFNs, the Butler matrix has received particular attention as it is theoretically lossless and employs the minimum number of components to generate a given set of orthogonal beams (provided that the number of beams is a power of 2). However, the Butler matrix has a main design problem which is the presence of path crossings that has been previously addressed in different research works. Substrate Integrated Waveguide (SIW) features interesting characteristics for the design of microwave and millimetre-wave integrated circuits. SIW based components combine the advantages of the rectangular waveguide, such as the high Q factor (low insertion loss) and high power capability while being compatible with low-cost PCB and LTCC technologies. Owing to its attractive features, the use of SIW technology appears as a good candidate for the implementation of BFNs. The resulting structure is therefore suitable for both waveguide-like and planar structures. In this thesis, different novel passive components (couplers and phase shifters) have been developed exploring the multi-layer SIW technology towards the implementation of a two-layer compact 4×4 Butler matrix offering wideband performances for both transmission magnitudes and phases with good isolation and input reflection characteristics. Different techniques for the implementation of wideband fixed phase shifters in SIW technology are presented. First, a novel waveguide-based CRLH structure is proposed. The structure is based on a single-layer waveguide with shunt inductive windows (irises) and series transverse capacitive slots, suitable for SIW implementations for compact phase shifters. The structure suffers relatively large insertion loss which remains however within the typical range of non-lumped elements based CRLH implementations. Second, the well-known equal length, unequal width SIW phase shifters is discussed. These phase shifters are very adapted for SIW implementations as they fully exploit the flexibility of the SIW technology in different path shapes while offering wideband phase characteristics. To satisfy good return loss characteristics with this type of phase shifters, the length has to be compromised with respect to the progressive width variations associated with the required phase shift values. A twolayer, wideband low-loss SIW transition is then proposed. The transition is analyzed using its equivalent circuit model bringing a deeper understanding of its transmission characteristics for both amplitude and phase providing therefore the basic guidelines for electromagnetic optimization. Based on its equivalent circuit model, the transition can be optimized within the well equal-length SIW phase shifters in order to compensate its additional phase shift within the frequency band of interest. This twolayer wideband phase shifter scheme has been adopted in the final developed matrix architecture.This transition is then exploited to develop a three-layer, multiply-folded waveguide structure as a good candidate for compensated-length, variable width, low-loss, compact wideband phase shifters in SIW technology. Novel two-layer SIW couplers are also addressed. For BFNs applications, an original structure for a two-layer 90° broadband coupler is developed. The proposed coupler consists of two parallel waveguides coupled together by means of two parallel inclined-offset resonant slots in their common broad wall. A complete parametric study of the coupler is carried out including the effect of the slot length, inclination angle and offset on both the coupling level and the transmission phase. The first advantage of the proposed coupler is providing a wide coupling dynamic range by varying the slot parameters allowing the design of wideband SIW Butler matrix in two-layer topology. In addition, previously published SIW couplers suffer from direct correlation between the transmission phase and the coupling level, while the coupler, hereby proposed, allows controlling the transmission phase without significantly affecting the coupling level, making it a good candidate for BFNs employing different couplers, such as, the Nolen matrix. A novel dual-band hybrid ring coupler is also developed in multi-layer Ridged SIW (RSIW) technology. This coupler has been jointly developed with Tarek Djerafi in a collaboration scenario with Prof. Ke Wu from the Ecole Polytechnique de Montréal. The coupler has an original structure based on two concentric rings in RSIW topology with the outer ring periodically loaded with radial, stub-loaded transverse slots. A design procedure is presented based on the Transverse Resonance Method (TRM) of the ridged waveguide together with the simple design rules of the hybrid ring coupler. A C/K dual band coupler with bandwidths of 8.5% and 14.6% centered at 7.2 GHz and 20.5 GHz, respectively, is presented. The coupler provides independent dual band operation with low-dispersive wideband operation. Finally, for the Butler matrix design, the two-layer SIW implementation is explored through a two-fold enhancement approach for both the matrix electrical and physical characteristics. On the one hand, the two-layer topology allows an inherent solution for the crossing problem allowing therefore more flexibility for phase compensation over a wide frequency band. This is achieved by proper geometrical optimization of the surface on each layer and exploiting the SIW technology in the realization of variable width waveguides sections with the corresponding SIW bends. On the other hand, the two-layer SIW technology is exploited for an optimized space saving design by implementing common SIW lateral walls for the matrix adjacent components seeking maximum size reduction. The two corresponding 4×4 Butler matrix prototypes are optimized, fabricated and measured. Measured results are in good agreement with the simulated ones. Isolation characteristics better than -15 dB with input reflection levels lower than -12 dB are experimentally validated over 24% frequency bandwidth centered at 12.5 GHz. Measured transmission magnitudes and phases exhibit good dispersive characteristics of 1dB, around an average value of -6.8 dB, and 10° with respect to the theoretical phase values, respectively, over the entire frequency band.

Optical communications systems operate at the limits of their margins to respond to increasing capacity demands. Some of the signal processing functions required must soon operate at speeds beyond electronic implementation. Optical signal processors are fundamentally analog which requires precise control of the operating state. Programmable optical components are consequently essential. The thesis explores and elucidates the properties of meshes of generalized Mach-Zehnder interferometers (GMZIs) amenable to silicon (Si) photonics integration that are based on multimode interference couplers with programmability achieved via voltage controlled phase-shift elements within the interferometer arms to perform a variety of finite impulse response (FIR) and infinite impulse response (IIR) signal processing functions. The thesis presents a novel class of integrated photonic phased array systems with a single-stage, multistage, and feedback architectures. The designed photonic integrated systems utilize nano-electromechanical-system (NEMS) operated phase shifters of cascaded free suspended slot waveguides that are compact and require a small amount of power to operate. The structure of the integrated photonic phased array switch (IPPAS) elements is organized such that it brings the NEMS-operated phase shifters to the exterior sides of the construction; facilitating electrical connection. The transition slot couplers used to interconnect the phase shifters to the rest of the silicon structure are designed to enable biasing one of the silicon beams of each phase shifter from an electrode located at the side of the phase shifter. The other silicon beam of each phase shifter is biased through the rest of the silicon structure of the fabric, which is taken as a ground. Phased array processors of 2×2 and 4×4 multiple-input-multiple-output (MIMO) ports are conveniently designed within reasonable footprints native to the current fabrication technologies. The response of the single-stage 4×4 broadband IPPAS element is determined, and its phase synthesis states required for single-throw, double-throw and broadcast routing operations are predicted. The transmission responses of the single-stage wavelength division multiplexing (WDM) processors of 2×2 and 4×4 MIMO ports are simulated. The wavelength steering capability of the transmission interferograms by applying progressive phase shifts through the array of NEMS-operated phase shift elements of the single-stage 4×4 WDM (de)multiplexer is demonstrated. The advantages of cascading broadband and WDM phased array sections are articulated through several study cases. Five different cascaded phased array architectures are trialed for the construction of non-blocking 4×4 IPPAS broadband switches that are essential elements in the construction of universal photonic processors. A cascaded 2×2 WDM (de)multiplexer that can set the bandwidth of the (de)multiplexed cyclic channels into a binary number of programmable values is demonstrated. The envelope and wavelength modulations of the transmission responses utilizing a cascaded forward structure of three 2×2 sections that can be utilized for the (de)multiplexing of different bandwidth channels are demonstrated providing individual wavelength steering capability of the narrowband and wideband channels and the individual wavelength steering capability of the slow envelope and wavelength modulating functions. Innovative universal 2×2 and 4×4 cascaded phased array processors of advanced high-order architectures that can function as both non-blocking broadband routers and tunable WDM (de)multiplexers with spectrum steering and bandwidth control of the (de)multiplexed demands are introduced. The multimode interference (MMI) coupler is utilized for the construction of several IIR feedback photonic processors. Tunable photonic feedback processors have the advantage of using less number of MMI couplers compared to their counterparts of FIR forward-path processors saving on the footprint and loss merits. A passive feedback 2×2 (de)multiplexer made of a 4×4 MMI coupler and two loopback paths is proposed. The inclusion of an imbalance in the lengths of the loopback paths of the same symmetrical feedback (de)multiplexer is demonstrated to achieve wavelength modulation of the (de)multiplexed transmission responses that are useful for the (de)multiplexing of different bandwidth channels. Several newly introduced IIR feedback architectures are demonstrated to function similarly as their counterparts of FIR forward-path processors as binary bandwidth variable (de)multiplexers, envelope and wavelength modulation (de)multiplexers, and universal feedback processors. The investigation provided in this thesis is also supported with dynamic zero-pole evolution analysis in the complex plane of analysis of the studied FIR and IIR photonic processors to enhance understanding the principle of operation. This research expands the prospective for constructing innovative silicon-on-insulator (SOI) based optical processors for applications in modern optical communication systems and programmable elastic optical networks (EONs).

This thesis presents various integrated antenna solutions for different types of systems and applications, e.g. wireless sensors, broadband handsets, advanced base stations, MEMS-based reconfigurable front-ends, automotive anti-collision radars, and large area electronics. For wireless sensor applications, a T-matched dipole is proposed and integrated in an electrically small body-worn sensor node. Measurement techniques are developed to characterize the port impedance and radiation properties. Possibilities and limitations of the planar inverted cone antenna (PICA) for small handsets are studied experimentally. Printed slot-type and folded PICAs are demonstrated for UWB handheld terminals. Both monolithic and hybrid integration are applied for electrically steerable array antennas. Compact phase shifters within a traveling wave array antenna architecture, on single layer substrate, is investigated for the first time. Radio frequency MEMS switches are utilized to improve the performance of reconfigurable antennas at higher frequencies. Using monolithic integration, a 20 GHz switched beam antenna based on MEMS switches is implemented and evaluated. Compared to similar work published previously, complete experimental results are here for the first time reported. Moreover, a hybrid approach is used for a 24 GHz switched beam traveling wave array antenna. A MEMS router is fabricated on silicon substrate for switching two array antennas on a LTCC chip. A concept of nano-wire based substrate integrated waveguides (SIW) is proposed for millimeter-wave applications. Antenna prototypes based on this concept are successfully demonstrated for automotive radar applications. W-band body-worn nonlinear harmonic radar reflectors are proposed as a means to improve automotive radar functionality. Passive, semi-passive and active nonlinear reflectors consisting of array antennas and nonlinear circuitry on flex foils are investigated. A new stretchable RF electronics concept for large area electronics is demonstrated. It incorporates liquid metal into microstructured elastic channels. The prototypes exhibit high stretchability, foldability, and twistability, with maintained electrical properties. / wisenet