Little is known of the physiological and biochemical mechanisms underlying competitive interactions between alien invasive grasses and native taxa, and how these are affected by resource supply. Consequently, this study compared photosystem II (PS II) function, photosynthetic gas and water exchange, enzyme and pigment concentrations, flowering and biomass accumulation in an indigenous geophyte, Tritonia crocata (L.) Ker. Gawl., grown in monoculture and admixed with the alien grass, Lolium multiflorum Lam., at different levels of water and nutrient supply. Diminished stomatal conductances were the primary cause of reduced net C02 assimilation rates, and consequent biomass accumulation in T. crocata admixed with L. multiflorum at all levels of water and nutrient supply with one exception. These corresponded with decreased soil water contents induced presumably by more efficient competition for water by L. multiflorum, whose biomass was inversely correlated with soil water content. Biochemical impairments to photosynthesis were also apparent in T. crocata admixed with L. multiflorum at low levels of water and nutrient supply. These included a decline in the density of working photosystems (reaction center per chlorophyll RC/ABS), which corresponded with a decreased leaf chlorophyll a content and a decreased efficiency of conversion of excitation energy to electron transport (¥0 / l-^o), pointing to a reduction in electron transport capacity beyond QA~, a decline in apparent carboxylation efficiency and Rubisco content. At low nutrient levels but high water supply, non-stomatal induced biochemical impairments to photosynthesis (decreased RC/ABS, chlorophyll a and Rubisco content) were apparent in T. crocata admixed with L. multiflorum. These attributed to a reallocation of fixed carbohydrate reserves to floral production which increased significantly in T. crocata under these conditions only and associated with a corresponding reduction in the mass of its underground storage organ (bulb). The results of this study did not support the hypothesis that under conditions of low water and low nutrient supply invasive annual grasses would have a lesser impact on the growth and physiology of native geophytes than under resource enriched conditions that favor growth of these grasses. Unresolved is whether resource limitation and allelopathic mechanisms functioned simultaneously in the inhibition of the native geophyte by the alien grass. / Thesis (M. Environmental Science (Ecological Remediation and Sustainable Utilisation))--North-West University, Potchefstroom Campus, 2008.

Em arqueometria e nas ciências aplicadas, metodologias físicas e químicas são de grande utilidade para estudar diferentes materiais e objetos do patrimônio cultural como pinturas de cavalete, murais, cerâmicas, metais, etc. No caso particular de pinturas, tais análises podem auxiliar na compreensão do processo criativo, dos materiais utilizados pelo artista e do estado de conservação desta obra. No contexto deste último item, podem ser caracterizados sinais de degradação, como a alteração de cores. Dentro do objetivo de compreender a degradação de alguns pigmentos por exposição luminosa, estudaram-se os pigmentos amarelo de cádmio (CdS), amarelo de cromo (PbCrO4), azul de cobalto (CoAl2O4) e cerúleo (Co2SnO4), sendo estes dois últimos também misturados ao branco de zinco (ZnO). Tais estudos foram realizados através de três ensaios com amostras padrões preparadas com estes pigmentos: fotodegradação induzida na linha TGM (Toroidal Grating Monochromator) do Laboratório Nacional de Luz Síncrotron; exposição à luz ultravioleta no simulador solar SOL-UV; e exposição às radiações ultravioleta, visível e infravermelha em uma câmara projetada neste mestrado. Os resultados apontaram para indicativos de alteração em todas as amostras, em especial mudanças no espectro de reflectância na região do visível. Por fim, analisaram-se amostras de tintas obtidas de obras do pintor Candido Portinari que possuíam indícios de alteração cromática. A partir destes fragmentos, construíram-se modelos estratigráficos dos materiais utilizados pelo artista nestas pinturas. / In archeometry and applied sciences, physical and chemical methodologies are very useful for studying different materials and objects of cultural heritage such as easel paintings, murals, ceramics, metals, etc. In the particular case of paintings, such analyses can help in understanding the creative process, the materials used by the artist and the conservation status of this work. In the context of this latter item, signs of degradation, such as color change, can be characterized. In order to understand the degradation of some pigments by light exposure, the cadmium yellow (CdS), chrome yellow (PbCrO4), cobalt blue (CoAl2O4) and cerulean blue (Co2SnO4) pigments were studied, the latter two being also mixed with zinc white pigment (ZnO). Such studies were carried out through three experiments prepared with these pigments: photodegradation induced in the TGM (Toroidal Grating Monochromator) line of the National Laboratory of Synchrotron Light; exposure to ultraviolet light in the SOL-UV solar simulator; and exposure to ultraviolet, visible and infrared radiation in a chamber designed in this master\'s degree. The results pointed out changes in all samples, especially in their reflectance spectrum in the visible region. Finally, samples obtained from works by the painter Candido Portinari that had signs of chromatic alteration were analyzed. Based on these fragments, stratigraphic models of the materials used by the artist in these paintings could be constructed.

This project was designed to investigate the effects of carbon dioxide (CO2) levels on the growth and pigment ratios (chemotaxonomy) of freshwater algal species typical to the south Florida surface waters. Green algae, diatoms, and cyanobacteria were cultured under 400 or 800 ppm CO3 in air for several weeks. Growth monitoring used a cell counter, hemocytometer, and chlorophyll fluorescence. Pigments were analyzed using HPLC-PDA. Experiments with certified CO2 concentrations (400, 600, 800, 1200 ppm) were conducted with helium degassed ultrapure water and each of three culture media. Theoretical and experimental pH values with water matched exactly. However, each culture media proved to exhibit significant buffer capacity. Cell growth monitoring was problematic except for the cyanobacterium Microcystis aeruginosa. That species responded to increased CO2 (800 ppm) with increased growth rates as predicted. The other species gave erratic results mainly due to difficulties in obtaining valid consistent cell counts. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2018. / FAU Electronic Theses and Dissertations Collection

The color is the one of the most important factor at textile and it is also an importantfactor at the point of purchasing a garment. Effect pigments provide extra color effects;they give angular color dependence such as iridescence, color travel, and luster. Thesespecial pigments can be found in a variety of industrial products and end-userapplications for instance in automotive, fashion, cosmetic and decorative texture whichmake special effect like angle-dependent color. In this work, we studied six differentkinds of effect pigments and applied them on polyamide fabrics. Then the CIExy andCIEL*a*b* diagrams of all samples plotted in five different angles; and the color offabrics, printed by these pigments, studied base on CIE diagrams. On the other hand, thecolor of samples asked from randomly chosen people and compared with color whichpredicted from CIE diagram. In addition ΔE values between fabrics, printed by effectpigments, and unprinted fabrics calculated and compared. Finally the reproducibilityproperty in the printing process has been considered.The results of this thesis work show that the color which we expected from fabric, printedby effect pigments, are different with human visualization. / Program: Magisterutbildning i textilteknologi

Monascus é um fungo ascomiceto tradicionalmente utilizado na China. Os povos orientais utilizam o produto de sua fermentação em arroz não aglutinado, ao qual dão o nome de \"Ang-kak\", e no inglês, \"Red yeast rice\". Sabe-se que este extrato contém substâncias hipocolesterolêmicas, como a Monacolina K, inibidor competitivo da enzima HMG-CoA. Este trabalho se insere neste contexto uma vez que consiste na otimização da fermentação e secagem do extrato de Monascus ruber. Embora já existam estudos sobre a atividade biológica deste extrato, os quais comprovam seus benefícios, não há muitos estudos que visam otimizar a sua fermentação em meio submerso e a secagem do extrato. Para tanto, foram avaliados diversos parâmetros na fermentação através de dois planejamentos fatoriais. No primeiro planejamento, as variáveis estudadas foram o meio de cultura (meio arrozina-glicose e meio sólido de arroz) e agitação (0 rpm e 10 rpm). A agitação promoveu um leve aumento na produção de monacolina-K, já o meio líquido foi mais eficiente na produção desta substância do que o meio sólido de arroz. Baseado neste experimento escolheu-se o meio fermentativo para os demais estudos. No segundo experimento as variáveis estudadas foram a adição no meio arrozina-glicose de zinco, amônio e glutamato. Neste experimento pôde-se verificar que o a produção de monacolina K e de pigmentos foi maior no meio com concentrações intermediárias de zinco e de glutamato e com concentrações maiores de amônio. No estudo da secagem, realizou-se um planejamento Box Benkhin, a fim de se avaliar a influência da proporção do adjuvante: fármaco, do tempo de incorporação do excipiente e da temperatura sobre características do extrato seco como: densidade aparente, densidade de compactação, fator de Hausner, umidade residual, atividade de água, atividade antioxidante e teor de monacolina K. Em relação à proporção do adjuvante: droga pode-se afirmar que a menor produz pós com menor atividade de água e teor de umidade, porém todos os pós obtidos tiveram seu teor de umidade e atividade de água dentro do ideal e a análise estatística mostrou que a proporção do adjuvante: droga não influenciou de forma significativa a atividade de água e o teor de umidade; a proporção 7,5:1 produz melhor rendimento e pós com melhores propriedades de fluxo, por possuírem menores valores de índice de compressibilidade e fator de hausner, já com a proporção 10:1 fornece pós com maior teor de monacolina e maior atividade antioxidante. Em relação à temperatura pode-se afirmar que utilizando-se 50°C obteve-se pós com melhores propriedades de fluxo, ou seja, menor índice de compressibilidade e menor e fator de hausner. Utilizando temperatura de 80°C obteve-se menor atividade antioxidante, maior rendimento e maior teor de monacolina K. Contudo, a análise estatística mostrou que a temperatura não influenciou de forma significativa o teor de monacolina K. Com uma temperatura maior, 110°C obteve-se menor teor de umidade e maior teor de pigmentos vermelhos. Em relação ao tempo de mistura do adjuvante pode-se afirmar que com 1 minuto obteve-se maior teor de pigmentos e pós com melhores propriedades de fluxo, com 5 minutos obteve-se menor teor de pigmentos, maior rendimento, maior teor de monacolina K e menor atividade de água, já com 10 minutos obteve-se menor teor de umidade e maior porcentagem de inibição. A análise estatística demonstrou que o tempo de mistura não influencia de forma significativa a atividade antioxidante. / Monascus ruber is an ascomycete fungus traditionally used in China. Eastern peoples use the product of its fermentation in rice non-agglutinated, which they call Ang-kak (red yeast rice, in English). It is known that this extract contains hypocholesterolemic substances such as the Monacoline K, a competitive inhibitor of the HMG-CoA enzyme. This work comes into this context since it consists in the optimization of the fermentative and drying processes of the Monascus rubers extract. Despite the existence of studies on the biological activity of this extract, which support its benefits, not many aimed at optimizing the fermentative process in submerged conditions and the drying of the extract. This work aimed at optimizing the fermentative process and the drying of the Monascus rubers extract. In order to do such, several parameters of the fermentative process were evaluated through two factorial plannings. In the first one, the variables studied were the modes of culture (liquid culture and solid-state culture) and agitation (0 rpm and 10 rpm). Agitation led to a slight increase in the production of Monacoline-K, and the liquid culture was more efficient in the production of this substance than the solid-state culture. Based on these findings, the fermentative substrate for the following experiments was chosen. In the second experiment, the variables studied were the addition of zinc, ammonium and glutamate in the liquid culture. It was observed that the production of monacoline-k and pigments was increased in the substrates with intermediary concentrations of zinc and glutamate and higher concentration of ammonium. In the drying study, a Box-Benkhin planning was adopted in order to assess the influence of the adjuvant: drug proportion, excipient incorporation time and temperature over the characteristics of the dried extract, such as: apparent density, compactation density, Hausner factor, residual humidity, water activity, antioxidant activity and monacoline-K levels. Regarding the adjuvant: drug proportion, it can be stated that the 5:1 proportion produces powders with smaller water activity and humidity levels, however, all the powders obtained presented humidity levels and water activity within the ideal and, besides that, the statistical analysis showed that the adjuvant: drug proportion had no significant influence on water activity or humidity levels; the proportion of 7,5:1 produces greater quantities and powders with better flow properties, since they have lower values of IC and FH; and with the proportion of 10:1, powders with higher levels of monacoline-K and greater antioxidant activity can be obtained. Concerning temperature, it was observed that powders with better flow properties (lower IC and FH) were obtained at 50°C. At 80°C, lower antioxidant activity, greater quantities and higher levels of monacoline-K were observed, however, the statistical analysis showed that the temperature had no significant effect on the levels of monacoline-K. With a higher temperature (110°C), lower humidity levels and higher red pigment levels were obtained. Concerning the mix time adjuvant: drug proportion, it can be stated that with 1 minute higher levels of pigment and powders with better flow properties were obtained; lower levels of pigment, greater quantities, higher levels of monacoline-K and lower water activity were obtained with 5 minutes and; lower humidity level and greater percentage of inhibition were observed with 10 minutes, however, the statistical analysis showed that the mix time has no significant influence on the antioxidant activity.

Ochre is a ubiquitous artefact in Middle Stone Age (MSA) contexts throughout Africa and the Near East. Archaeological evidence for the abrasive processing of ochre to extract pigment powder becomes increasingly prevalent after 100 ka. The habitual exploitation of ochre is interpreted as evidence for symbolism, a proxy for the origin of language and as a key element of ‘symbolic’ and ‘modern’ human behaviour. Evolutionary explanations agree that ochre and the products of its processing played a significant role in the adaptive strategies of early modern humans, but they differ in the functions assigned to it. I therefore ask the following question: What role did symbolic and functional applications of ochre play in the enhancement of prehistoric technology, and how may these have functioned to promote and maintain social relations within MSA Homo sapiens societies? With the aim of answering this question, I follow a chaîne opératoire approach to elucidate the exploitation of ochre during the MSA. First, I present the results of an experimental study devised to infer the methods employed to process ochre. It is demonstrated that functional data derived from actualistic experiments can enhance our understanding prehistoric behaviour. Second, I describe one of the oldest instances of a deliberate engraving on ochre at 100 ka to 85 ka. I consider the possibility that specific types of raw material were selected for engraving purposes and expand on whether all engraved depictions inevitably functioned in ‘symbolic’ contexts. The third objective entails the evaluation of an often cited functional hypothesis for ochre, namely the use of red ochre as a ‘hide-tanning’ ingredient. I also introduce and discuss three further functional hypotheses, namely those concerning the use of ochre as a form of mineral supplementation and detoxification agent, as a sunprotection element and as an insect repellent. Ethnoarchaeological research has proven to be informative in terms of revealing a range of functional uses for red ochre. I therefore consider how data derived from the Ovashimba of northern Namibia can enhance current understandings of ochre use in the MSA. I propose that in order to assess any hypothesis concerning the exploitation of ochre in the MSA methodically and in a scientific manner, it is necessary to engage with the theories and analytical methods of cognitive and technical sciences not normally viewed as applicable to archaeological enquiry.

This study concerns the isolation, characterisation and physio-chemical properties of 8,8-methylmethine-(epi)catechin-malvidin-3-glucoside compounds found in red wines. 8,8-Methylmethine-(epi)catechin-malvidin-3-glucoside compounds were isolated via chromatographic methods developed in this study. The compounds were characterised via nuclear magnetic resonance spectrometry which, with the aid of molecular modelling, afforded their possible 3-dimensional structures. Their physio-chemical properties including ionisation and hydration constants, colour parameters and chemical stabilities were determined. The formation of 8,8-methylmethine-flavan-3-ol-malvidin-3-glucoside compounds and other pigments in wines was also studied. 8,8-Methylmethine-(epi)catechin-malvidin-3-glucoside compounds were also synthesised by condensing malvidin-3-glucoside with (epi)catechin in the presence of acetaldehyde. Diastereomers of 8,8-methylmethine-(epi)catechin-malvidin-3-glucoside pigments were isolated from the reaction using size-exclusion liquid chromatography followed by cation-exchange liquid chromatography. The structures of the four 8,8-methylmethine-catechin (and epicatechin)-malvidin-3-glucoside diastereomers were determined using mass spectrometry and one and two-dimensional nuclear magnetic resonance spectroscopy. It was found that for all four compounds, the methylmethine bridge occurs at the 8-positions of malvidin-3-glucoside and (epi)catechin and that the 3-dimensional structural differences between the diastereomers is the positioning of the (epi)catechin moiety with respect to the glucoside group. One diastereomer has the (epi)catechin on the same side, with respect to the malvidin entity whilst it is on the opposite side for the other diastereomer. The proposed structures also afforded the malvidin entity protection from nucleophilic attack via steric hindrance by the (epi)catechin moiety. 8,8-Methylmethine-(epi)catechin-malvidin-3-glucoside pigments have greater colour stability with regards to changes in pH and SO2 bleaching compared to malvidin-3-glucoside providing evidence that little or no hydration in aqueous solutions is occurring for these compounds. Further evidence for little or no hydration occurring is the presence of isosbestic points in the UV-vis spectra observed for the 8,8-methylmethine-(epi)catechin-malvidin-3-glucoside in the pH range 2 to 7. Although the 8,8-methylmethine-(epi)catechin-malvidin-3-glucoside pigments have greater colour stability to pH, SO2 and oxidation, compared to malvidin-3-glucoside, they have lower temporal stabilities and under both aerobic and anaerobic conditions they have significantly higher degradation rate constants than malvidin-3-glucoside. The ionisation constants of the 8,8-methylmethine-(epi)catechin-malvidin-3-glucoside compounds were determined using high voltage paper electrophoresis (HVPE) and UV-visible spectroscopy. The first ionisation constants (pKa1) of the 8,8-methylmethine-(epi)catechin-malvidin-3-glucoside compounds were found to be higher than that of malvidin-3-glucoside whereas the second and third ionisation constants (pKa2 and pKa3) were found to be lower. The correlation of the ionisation constants between HVPE and UV-visible spectroscopy supports the proposal that there is little or no occurrence of hydration for the 8,8-methylmethine-(epi)catechin-malvidin-3-glucoside compounds in the pH range investigated. 8,8-Methylmethine-flavan-3-ol-malvidin-3-glucoside compounds were the major pigments formed during fermentations of chemically defined grape juice media containing malvidin-3-glucoside and various flavan-3-ols. The yeast strain used for fermentation had a major influence on the levels and rates of formation of these pigments during fermentation. The yeast strain used also has an important influence on wine pigment composition, concentration and evolution during maturation thereby affecting the colour density and hue of the resultant wines. The initial formation of 8,8-methylmethine-flavan-3-ol-malvidin-3-glucoside compounds and their subsequent gradual degradation during maturation, allowed a pool of malvidin-3-glucoside to be available for the formation of other colour stable and more temporally stable pigments. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1339479 / Thesis (Ph.D.) - University of Adelaide, School of Agriculture, Food and Wine, 2008

The purpose of this research was to explore two ways of the application of chitosan, a biopolymer, for ink jet printing of textiles. 1) To apply chitosan as a post-treatment on the fabric ink jet printed with pigment based inks for the fixation of pigments on the fabric. 2) To incorporate chitosan as a binder in pigment based ink jet ink formulations. The incorporation of chitosan was carried out in two ways. 1) Direct addition of chitosan into the ink formulations containing surface modified pigments. 2) Preparation of chitosan encapsulated pigment nanoparticles using complex coacervation technique and using these nanoparticles for the formulation of ink jet ink. The degree of deacetylation (DD) was determined using FTIR spectroscopy. Various protocols proposed by researchers were used to determine the DD of chitosan samples used in the present study. The protocol proposed by Raut was found to be fairly accurate in determining the DD of chitosan samples. The molecular weight of chitosan was estimated using dilute solution viscometry method. The characterisation of the film forming ability of chitosan was evaluated using scanning electron microscopy (SEM). The colour strength (K/S), colour difference, colour characteristics and colour fastness to laundering and rubbing of ink jet printed fabrics post treated with chitosan were evaluated using standard methods. Post-treatment (pad-dry-cure method) of cotton fabric ink jet printed with pigment based inks revealed that chitosan could effectively fix the pigments on cotton compared to the commercial textile binders and the water-soluble derivative of chitosan. The chemical interaction between chitosan and cotton fabric was illustrated by FTIR-ATR analysis and through determination of carboxyl group content. The ink jet printed cotton fabric post treated with 3gpl chitosan (MW 156,156) maintained almost 86% of bacterial reduction against Klebsiella Pneumoniae even after 50 launderings. Inks containing chitosan were formulated and were found to be stable in terms of mean particle size and viscosity over a period of one month and for 4 freeze/thaw cycles. A magenta ink containing chitosan was selected for ink jet printing of cotton fabric. It was found that the DF was around 97% for magenta ink containing chitosan compared to around 53% fixation for magenta ink without chitosan on cotton fabric. Surface modified carbon black pigment with carboxylated (COO-) surface functionality was selected to prepare chitosan encapsulated pigment nanoparticles by complex coacervation technique. Chitosan encapsulated pigment nanoparticles with mean particle size diameter of 876 nm and 742 nm were formed when 5 ml of 0.1% w/v pigment was mixed with 2ml and 3ml of 0.1% w/v chitosan, respectively. However, no correlation was found between the particle size of the nanoparticles formed and the concentration of chitosan. The DF with ink containing chitosan encapsulated pigment nanoparticles was found to be around 98% while the blank ink with only surface modified carbon black pigment showed 44% fixation.

Little is known of the physiological and biochemical mechanisms underlying competitive interactions between alien invasive grasses and native taxa, and how these are affected by resource supply. Consequently, this study compared photosystem II (PS II) function, photosynthetic gas and water exchange, enzyme and pigment concentrations, flowering and biomass accumulation in an indigenous geophyte, Tritonia crocata (L.) Ker. Gawl., grown in monoculture and admixed with the alien grass, Lolium multiflorum Lam., at different levels of water and nutrient supply. Diminished stomatal conductances were the primary cause of reduced net C02 assimilation rates, and consequent biomass accumulation in T. crocata admixed with L. multiflorum at all levels of water and nutrient supply with one exception. These corresponded with decreased soil water contents induced presumably by more efficient competition for water by L. multiflorum, whose biomass was inversely correlated with soil water content. Biochemical impairments to photosynthesis were also apparent in T. crocata admixed with L. multiflorum at low levels of water and nutrient supply. These included a decline in the density of working photosystems (reaction center per chlorophyll RC/ABS), which corresponded with a decreased leaf chlorophyll a content and a decreased efficiency of conversion of excitation energy to electron transport (¥0 / l-^o), pointing to a reduction in electron transport capacity beyond QA~, a decline in apparent carboxylation efficiency and Rubisco content. At low nutrient levels but high water supply, non-stomatal induced biochemical impairments to photosynthesis (decreased RC/ABS, chlorophyll a and Rubisco content) were apparent in T. crocata admixed with L. multiflorum. These attributed to a reallocation of fixed carbohydrate reserves to floral production which increased significantly in T. crocata under these conditions only and associated with a corresponding reduction in the mass of its underground storage organ (bulb). The results of this study did not support the hypothesis that under conditions of low water and low nutrient supply invasive annual grasses would have a lesser impact on the growth and physiology of native geophytes than under resource enriched conditions that favor growth of these grasses. Unresolved is whether resource limitation and allelopathic mechanisms functioned simultaneously in the inhibition of the native geophyte by the alien grass. / Thesis (M. Environmental Science (Ecological Remediation and Sustainable Utilisation))--North-West University, Potchefstroom Campus, 2008.

Studies were undertaken to identify the basis of differences in seed coat pigmentation between selected yellow- and brown-seeded Brassicaceae, and near-isogenic yellow- and brown-seeded lines of </i>Brassica carinata</i> (PGRC/E 21164). Histochemical analyses of dissected seed coats from six genera of the Brassicaceae revealed condensed tannin (proanthocyanidin) and phlobaphene pigments in dark-seeded species and in scattered spots in most yellow-seeded species. Anthoeyanins were not detected in any seed coat tissue of these species. In leaf tissue, anthocyanin content was lower in yellow-seeded 'B. carinata' at the three- to four-leaf stage grown at 20 to 25°C, compared to similarly grown brown-seeded plants. At 15 to 18°C, both yellow- and brown-seeded lines produced similar amounts of anthocyanin in the seedling leaves. In TLC and HPLC analyses, 't'-cinnamic acid, dihydromyricetin [trace amounts], dihydroquercetin, dihydrokaempferol and flavonols (quercetin, kaempferol) were more abundant in extracts from seed coats of yellow-seeded ' B. carinata' than in extracts from seed coats of brown-seeded ' B. carinata'. Myricetin was not detected in any seed coat extracts. Mass spectra were determined for phenylpropanoid and flavonoid aglycones from the seed coat extracts and for authentic standards. Dihydroflavanol reductase ('DFR') transcripts from developing seed were absent or less abundant at 5, 10, 20 and 30 days after pollination in the yellow-seeded line compared to the brown-seeded line of 'B. carinata'. 'DFR' transcripts in seedling leaves from the yellow-seeded line grown in warm, bright conditions were less abundant compared to similarly grown brown-seeded material. Seedlings grown at 15 to 18°C produced greater amounts of 'DFR' transcript in both yellow- and brown-seeded lines of 'B. carinata' compared to warm-grown plants. Data from these experiments suggest that seed coat pigmentation in the Brassicaceae is due to condensed tannin and phlobaphene accumulation, not anthocyanins, and that seed coat pigment biosynthesis is down-regulated at dihydroflavonol reductase. The regulatory factor controlling 'DFR' expression in developing seed may be temperature sensitive and also affect anthocyanin biosynthesis in seedlings and in related metabolic pathways: thioglycolic lignin concentration was significantly lower in the yellow-seeded Brassicaccae and in the seed coat tissue of yellow-seeded 'B. carinata' compared to dark-seeded samples.