Spelling suggestions: "subject:"plant population."" "subject:"slant population.""
81 |
Variabilidade e base genética da pungência e de caracteres do fruto: implicações no melhoramento de uma população de Capsicum annuum L.. / Variability and genetic basis of pungency and fruit characters: implications in the breeding of a capsicum annuum l. population.Caroline Moor Wagner 10 April 2003 (has links)
Este trabalho está inserido no programa de melhoramento genético de Capsicum da Embrapa Hortaliças. Teve como principal objetivo investigar a base genética e a variabilidade de uma população segregante de Capsicum em relação à pungência e a alguns caracteres do fruto para, fornecer informações úteis ao programa. Os genótipos utilizados compreenderam dois genitores homozigóticos contrastantes para o caráter principal, a pungência, bem como as respectivas gerações F1, RC11 e progênies F4.3. Estas últimas num total de 100, foram obtidas pelo método SSD (single seed descent). Empregou-se delineamento em blocos casualizados com três repetições e dez plantas por parcela. As análises biométricas foram feitas com base em médias de parcelas. Os caracteres avaliados foram: pungência, produtividade, largura, comprimento, número e peso médio dos frutos e espessura da polpa. Investigou-se a segregação fenotípica das progênies F4.3, classificando-as em pungentes e doces. Estimou-se o coeficiente de herdabilidade na base de médias de progênies em todos os caracteres. Simulando uma seleção entre progênies somente para a pungência, tanto para aumento como redução deste caráter, estimou-se o ganho esperado (Gs) sob intensidades de 20%, 10% e 5%. Calculou-se a resposta correlacionada desta seleção sobre os demais caracteres. Paralelamente verificou-se a acuidade de avaliar a pungência utilizando métodos sensoriais, em comparação com o processo cromatográfico (CLAE). Estimaram-se os componentes genéticos das médias dos caracteres nas cinco gerações, considerando modelo aditivo-dominante e, quando necessário, incluindo componente epistático aditivo x aditivo. Verificou-se que, os genitores são contrastantes para todos os caracteres com exceção da espessura da polpa. O genitor doce deve conter genes para pungência não expressos. Os dados sugerem que, na população estudada, este caráter deve ser controlado por dois locos epistáticos, duplo-dominantes (9 pungentes : 7 doces em F2) e genes modificadores. Os coeficientes de herdabilidade variaram de intermediários (66%) a altos (92%). Isso explicou os elevados ganhos esperados com a seleção para incrementar ou diminuir a pungência. Pelas respostas correlacionadas, verificou-se que, uma seleção para aumento da pungência deverá levar a uma redução na produtividade, sendo a recíproca também verdadeira. A avaliação da pungência por método cromatográfico foi de aproximadamente 30% mais eficiente do que o método sensorial. Pelos componentes de média observou-se a existência de heterose em todos os caracteres avaliados. O modelo incluindo efeitos epistáticos foi o mais adequado para explicar as médias das gerações, na maioria dos caracteres. Podem surgir indivíduos com frutos pungentes ao cruzar genitores doces. A segregação transgressiva em F4 é indicador de que tipos mais pungentes que o genitor pungente podem ser selecionados a partir desta população segregante. O melhoramento genético deste caráter pode ser estruturado tanto para explorar as variâncias genéticas aditiva e aditiva x aditiva em linhagens superiores como pode ser conduzido para capitalizar a heterose em híbridos de linhagens. Em programas iniciados cruzando-se linhagens, é fundamental identificar a constituição alélica dos genitores. É preciso monitorar a pressão seletiva numa seleção visando a pungência para evitar repostas correlacionadas indesejáveis. Para atingir máximos seletivos, para este caráter, é necessário levar em conta a existência de genes modificadores. / This work is part of the Capsicum plant breeding program at Embrapa Hortaliças. The main objective was to investigate the genetic basis and variability of a segregating population of Capsicum, related to pungency and to some characteristics of the fruit, to provide information for the program. The genotypes that were used had two homozygotic parents, contrasting in their main characteristic, pungency, as well as the respective generations F1, RC11 and progenies F3.4. The latter, totaling 100, were obtained using the SSD method (single seed descent). Randomized complete block design was used with three repetitions and ten plants per plots. The biometric analyses were based on a plot mean basis. The characters evaluated were pungency, productivity, width, length, number and average weight of the fruits and the thickness of the pulp. The fenotypical segregation of the F3.4 progenies were studied, being classified in pungent and sweet. The coefficient of heritability on a progeny mean basis were estimated in all the characters. Simulating a selection among progenies, only for pungency, for the increase as well as the reduction of this character, the expected gain (Gs) was estimated under intensities of 20%, 10% and 5%. The correlated response of this selection was calculated over the remaining characters. Parallel to this, the acuity of evaluating the pungency, using sensorial methods, in comparison to the high pressure liquid chromatographic process (HPLC) was investigated. The genetic components of the trait means of the five generations, were estimated considering the additive dominant model, and, when necessary, including an additive x additive epistatic component. Results indicated that the parents are contrasting for all characters, with the exception of pulp thickness. The sweet parent should contain genes for pungency wich are not expressed. The data suggests that, in the population studied, this character is controlled by two doubly dominant epistatic loci, (9 pungent ones : 7 sweet ones in F2) and modifier genes. Coefficients of heritabilty varied from intermediate (66%) to high (92%). This explained the elevated expected gains from selection, to increase or decrease pungency. From the correlated responses, one could see that, selecting to increase pungency should lead to a reduction in productivity, being the reciprocal also true. The evaluation of pungency by a chromatographic method was approximately 30% more efficient than the sensorial method. By the genetic components of means, the existence of heterosis was observed in all the characters evaluated. The model which included epistatic effects was the most adequate to explain the average generation means in most of the characters. Individuals with pungent fruits can appear on crossing sweet parents. The transgressive segregation in F4 is an indicator that more pungent types than the pungent parent can be selected from this segregating population. Plant breeding of this character can be structured for the exploration of additive and additive x additive genetic variances in superior lines, or to capitalize the heterosis in hybrid of inbred lines. In programs initiated by crossing lines, it is fundamental to identify the allelic constitution of the parents. It is necessary to monitor the selective pressure in selection aiming at pungency, to avoid undesired correlated responses. To attain selective maximums, for this character, it is necessary to take into account the existence of modifier genes.
|
82 |
SOYBEAN PLANT POPULATIONS AND DIGITAL ASSESSMENTSRichard M Smith (14279081), Shaun N. Casteel (10972050), Jason Ackerson (9749436), Keith Cherkauer (7890221), Melba Crawford (14279296) 20 December 2022 (has links)
<p> Soybean seed cost has dramatically increased in recent decades which has led to producer interest in lowering input cost through reductions in seeding rate. Fifty-eight seeding rate trials of soybean were conducted at field-scale in Indiana from 2010 to 2021 to update recommendations of seeding rates and plant population. The objectives were to determine the agronomic optimal seeding rate (AOSR) and plant population (AOPP) based on planting equipment, tillage practices, and planting date. Economic optimal seeding rate (EOSR) was also determined based on these field scenarios. Harvest AOPP was not influenced by planting equipment (~212,000 plants ha-1) or tillage (~239,000 plants ha-1), but AOSR varied. Soybean seeded with a row-crop planter optimized grain yield with 352,600 seeds ha-1; whereas, the grain drill required 75,200 more seeds ha-1. Soybean seeded into conventional tillage maximized grain yield at 380,400 seeds ha-1; whereas, under no-till conditions 41,400 more seeds ha-1 were required. Timely planting required 417,300 seeds ha-1 to optimize grain yield, which resulted in harvest AOPP of 216,700 plants ha-1. Conversely, late plantings required 102,800 fewer seeds ha-1 but 36,200 more plants ha-1 than timely planting. Depending on seed cost and soybean market price, seeding rates could be reduced 13,700 to 92,800 seeds ha-1 below AOSR to maximize profit.</p>
<p>Secondly, digital imagery with high spatial resolution was collected with an unmanned aerial vehicle (UAV) to develop a simple and practical method to segment soybean from non-plant pixels. The best vegetation indices were selected to segment young soybean plants (VC to V6). Two field-scale trials of soybean were planted in 2020 with the agronomic trial design of two varieties x five seeding rates with three replications. The imagery was collected during this period as it coincides with the time for determining whether a soybean stand should be replanted. Five relative vegetative indices based on the red, green, and blue (RGB) imagery were evaluated: excess greenness index (ExG), excess redness index (ExR), green leaf index (GLI), normalized green-red difference index (NGRDI) and visible atmospheric resistance index (VARI). Both GLI and ExG were superior in overall accuracy compared to all other vegetative indices with very small soybean plants (VC to V1 growth stages). VARI and NGRDI had relatively poor overall accuracy at VC and V1, but had similar overall accuracy to GLI as soybean plants grew larger (V2 to V6 growth stages). Across all growth stages and locations, ExR performed the poorest. Moreover, GLI had consistent performance across the range of growth stages, suggesting its suitability for early soybean stand assessment methods.</p>
<p>Six field-scale trials were established in 2020 and 2021 in Indiana with two varieties seeded from 123,000 to 618,000 seeds ha-1. Canopy cover was calculated using GLI to create binary segmentation of plant pixels and non-plant pixels. UAV-derived canopy cover measurements were correlated with plant population of soybean from VC to V4 and growing degree days (GDD) after planting. Yield potential (75, 80, 85, 90, 95, 100%) was correlated with canopy cover from VC to V4 and GDD after planting. Canopy cover of 2.1, 5.0, 8.9 and 13.8% by 150, 250, 350, and 450 GDD°C after planting, respectively, would maximize yield. Canopy cover for 75% yield potential was one-fourth as much as the 100% yield potential. Recommended threshold for replant decisions should be based on canopy cover to attain 95% yield potential. Field observations below a canopy cover of 1.8, 4.2, 7.4, and 11.5% canopy cover by 150, 250, 350, and 450 GDD°C after planting respectively, would consider replanting. </p>
|
83 |
Canopy Architecture and Plant Density Effect in Short-Season Chickpea (Cicer arietinum L.)Vanderpuye, Archibald W. 22 September 2010
Chickpea (Cicer arietinum L.) production on the semi-arid Canadian Prairies is challenging due to a short growing season and low and variable moisture. The current recommended chickpea population density of 44 plants m-2 is based on preliminary studies and a narrow range of 20 to 50 plants m-2. The aims of this study were to i) determine optimum population density of varying chickpea canopy types, i.e., leaf type and growth habit, by investigating seed yield responses at 30 to 85 plants m-2 and ii) identify desirable parental traits for breeding programs by assessing growth and yield parameter responses to varying leaf types and growth habits at a range of population densities. Field experiments were conducted from 2002 to 2005. Canopy measurements and calculated variables included light interception, biomass, growth rate, seed yield, harvest index, ascochyta blight severity and radiation- and water use efficiencies.
The plant density which produced the highest seed yield when averaged over years for each location for each treatment revealed that a plant density of at least 55 plants m-2 produced a 23% to 49% seed yield increase above that of the currently recommended plant density. This indicates that a higher seed yield average over the long term in spite of periodic low seed yield episodes will be more profitable to producers. Increasing plant density increased lowest pod height significantly in all except one location-year but did not explicitly increase ascochyta blight severity or decrease individual seed size. This suggests that increasing the recommended chickpea plant density on the Canadian Prairies will increase seed yield but would neither negatively impact individual seed size nor ascochyta blight severity, especially, when combined with good agronomic practices.
Fern-leaved cultivars had significantly higher maximum intercepted light (62 to 91%), seed yield (136 to 369 g m-2), harvest index (0.33 to 0.53), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and lower ascochyta blight severity (3 to 27%) than the unifoliate cultivars in all location-years. The fern-leaved cultivars also tended to show significantly higher cumulative intercepted radiation (221 to 419 MJ m-2) and biomass (306 to 824 g m-2) but leaf type showed no consistent effect on radiation use efficiency.
Cultivars with bushy growth habit generally performed better regarding maximum intercepted light (62 to 90%), cumulative intercepted radiation (233 to 421 MJ m-2), biomass (314 to 854 MJ m-2), seed yield (120 to 370 g m-2), harvest index (0.37 to 0.50), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and ascochyta blight severity (7 to 36%) than the erect cultivars. The overall performance of the spreading cultivar was generally intermediate between the bushy and erect cultivars except for ascochyta blight severity where the spreading cultivar exhibited significantly lower disease severity (3 to 36%). Radiation use efficiency was generally not influenced by growth habit.
Increasing plant population density generally increased intercepted light, biomass and cumulative intercepted radiation on each sampling day after seeding resulting in a general increase in seed yield. Harvest index, however, remained constant and ascochyta blight severity was generally stable but radiation use efficiency decreased with increasing population density. Chickpea cultivars with fern leaves and bushy growth habit at higher than currently recommended population densities would best utilize the limited resources of the short-season Canadian prairie environment to maximize and stabilize seed yield.
|
84 |
Canopy Architecture and Plant Density Effect in Short-Season Chickpea (Cicer arietinum L.)Vanderpuye, Archibald W. 22 September 2010 (has links)
Chickpea (Cicer arietinum L.) production on the semi-arid Canadian Prairies is challenging due to a short growing season and low and variable moisture. The current recommended chickpea population density of 44 plants m-2 is based on preliminary studies and a narrow range of 20 to 50 plants m-2. The aims of this study were to i) determine optimum population density of varying chickpea canopy types, i.e., leaf type and growth habit, by investigating seed yield responses at 30 to 85 plants m-2 and ii) identify desirable parental traits for breeding programs by assessing growth and yield parameter responses to varying leaf types and growth habits at a range of population densities. Field experiments were conducted from 2002 to 2005. Canopy measurements and calculated variables included light interception, biomass, growth rate, seed yield, harvest index, ascochyta blight severity and radiation- and water use efficiencies.
The plant density which produced the highest seed yield when averaged over years for each location for each treatment revealed that a plant density of at least 55 plants m-2 produced a 23% to 49% seed yield increase above that of the currently recommended plant density. This indicates that a higher seed yield average over the long term in spite of periodic low seed yield episodes will be more profitable to producers. Increasing plant density increased lowest pod height significantly in all except one location-year but did not explicitly increase ascochyta blight severity or decrease individual seed size. This suggests that increasing the recommended chickpea plant density on the Canadian Prairies will increase seed yield but would neither negatively impact individual seed size nor ascochyta blight severity, especially, when combined with good agronomic practices.
Fern-leaved cultivars had significantly higher maximum intercepted light (62 to 91%), seed yield (136 to 369 g m-2), harvest index (0.33 to 0.53), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and lower ascochyta blight severity (3 to 27%) than the unifoliate cultivars in all location-years. The fern-leaved cultivars also tended to show significantly higher cumulative intercepted radiation (221 to 419 MJ m-2) and biomass (306 to 824 g m-2) but leaf type showed no consistent effect on radiation use efficiency.
Cultivars with bushy growth habit generally performed better regarding maximum intercepted light (62 to 90%), cumulative intercepted radiation (233 to 421 MJ m-2), biomass (314 to 854 MJ m-2), seed yield (120 to 370 g m-2), harvest index (0.37 to 0.50), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and ascochyta blight severity (7 to 36%) than the erect cultivars. The overall performance of the spreading cultivar was generally intermediate between the bushy and erect cultivars except for ascochyta blight severity where the spreading cultivar exhibited significantly lower disease severity (3 to 36%). Radiation use efficiency was generally not influenced by growth habit.
Increasing plant population density generally increased intercepted light, biomass and cumulative intercepted radiation on each sampling day after seeding resulting in a general increase in seed yield. Harvest index, however, remained constant and ascochyta blight severity was generally stable but radiation use efficiency decreased with increasing population density. Chickpea cultivars with fern leaves and bushy growth habit at higher than currently recommended population densities would best utilize the limited resources of the short-season Canadian prairie environment to maximize and stabilize seed yield.
|
85 |
The role of different modes of interactions among neighbouring plants in driving population dynamicsLin, Yue 18 February 2013 (has links) (PDF)
The general aim of my dissertation was to investigate the role of plant interactions in driving population dynamics. Both theoretical and empirical approaches were employed. All my studies were conducted on the basis of metabolic scaling theory (MST), because the complex, spatially and temporally varying structures and dynamics of ecological systems are considered to be largely consequences of biological metabolism. However, MST did not consider the important role of plant interactions and was found to be invalid in some environmental conditions. Integrating the effects of plant interactions and environmental conditions into MST may be essential for reconciling MST with observed variations in nature. Such integration will improve the development of theory, and will help us to understand the relationship between individual level process and system level dynamics.
As a first step, I derived a general ontogenetic growth model for plants which is based on energy conservation and physiological processes of individual plant. Taking the mechanistic growth model as basis, I developed three individual-based models (IBMs) to investigate different topics related to plant population dynamics:
1. I investigated the role of different modes of competition in altering the prediction of MST on plant self-thinning trajectories. A spatially-explicit individual-based zone-of-influence (ZOI) model was developed to investigate the hypothesis that MST may be compatible with the observed variation in plant self-thinning trajectories if different modes of competition and different resource availabilities are considered. The simulation results supported my hypothesis that (i) symmetric competition (e.g. belowground competition) will lead to significantly shallower self-thinning trajectories than asymmetric competition as predicted by MST; and (ii) individual-level metabolic processes can predict population-level patterns when surviving plants are barely affected by local competition, which is more likely to be in the case of asymmetric competition.
2. Recent studies implied that not only plant interactions but also the plastic biomass allocation to roots or shoots of plants may affect mass-density relationship. To investigate the relative roles of competition and plastic biomass allocation in altering the mass-density relationship of plant population, a two-layer ZOI model was used which considers allometric biomass allocation to shoots or roots and represents both above- and belowground competition simultaneously via independent ZOIs. In addition, I also performed greenhouse experiment to evaluate the model predictions. Both theoretical model and experiment demonstrated that: plants are able to adjust their biomass allocation in response to environmental factors, and such adaptive behaviours of individual plants, however, can alter the relative importance of above- or belowground competition, thereby affecting plant mass-density relationships at the population level. Invalid predictions of MST are likely to occur where competition occurs belowground (symmetric) rather than aboveground (asymmetric).
3. I introduced the new concept of modes of facilitation, i.e. symmetric versus asymmetric facilitation, and developed an individual-based model to explore how the interplay between different modes of competition and facilitation changes spatial pattern formation in plant populations. The study shows that facilitation by itself can play an important role in promoting plant aggregation independent of other ecological factors (e.g. seed dispersal, recruitment, and environmental heterogeneity).
In the last part of my study, I went from population level to community level and explored the possibility of combining MST and unified neutral theory of biodiversity (UNT). The analysis of extensive data confirms that most plant populations examined are nearly neutral in the sense of demographic trade-offs, which can mostly be explained by a simple allometric scaling rule based on MST. This demographic equivalence regarding birth-death trade-offs between different species and functional groups is consistent with the assumptions of neutral theory but allows functional differences between species. My initial study reconciles the debate about whether niche or neutral mechanisms structure natural communities: the real question should be when and why one of these factors dominates.
A synthesis of existing theories will strengthen future ecology in theory and application. All the studies presented in my dissertation showed that the approaches of individual-based and pattern-oriented modelling are promising to achieve the synthesis.
|
86 |
The role of different modes of interactions among neighbouring plants in driving population dynamicsLin, Yue 22 January 2013 (has links)
The general aim of my dissertation was to investigate the role of plant interactions in driving population dynamics. Both theoretical and empirical approaches were employed. All my studies were conducted on the basis of metabolic scaling theory (MST), because the complex, spatially and temporally varying structures and dynamics of ecological systems are considered to be largely consequences of biological metabolism. However, MST did not consider the important role of plant interactions and was found to be invalid in some environmental conditions. Integrating the effects of plant interactions and environmental conditions into MST may be essential for reconciling MST with observed variations in nature. Such integration will improve the development of theory, and will help us to understand the relationship between individual level process and system level dynamics.
As a first step, I derived a general ontogenetic growth model for plants which is based on energy conservation and physiological processes of individual plant. Taking the mechanistic growth model as basis, I developed three individual-based models (IBMs) to investigate different topics related to plant population dynamics:
1. I investigated the role of different modes of competition in altering the prediction of MST on plant self-thinning trajectories. A spatially-explicit individual-based zone-of-influence (ZOI) model was developed to investigate the hypothesis that MST may be compatible with the observed variation in plant self-thinning trajectories if different modes of competition and different resource availabilities are considered. The simulation results supported my hypothesis that (i) symmetric competition (e.g. belowground competition) will lead to significantly shallower self-thinning trajectories than asymmetric competition as predicted by MST; and (ii) individual-level metabolic processes can predict population-level patterns when surviving plants are barely affected by local competition, which is more likely to be in the case of asymmetric competition.
2. Recent studies implied that not only plant interactions but also the plastic biomass allocation to roots or shoots of plants may affect mass-density relationship. To investigate the relative roles of competition and plastic biomass allocation in altering the mass-density relationship of plant population, a two-layer ZOI model was used which considers allometric biomass allocation to shoots or roots and represents both above- and belowground competition simultaneously via independent ZOIs. In addition, I also performed greenhouse experiment to evaluate the model predictions. Both theoretical model and experiment demonstrated that: plants are able to adjust their biomass allocation in response to environmental factors, and such adaptive behaviours of individual plants, however, can alter the relative importance of above- or belowground competition, thereby affecting plant mass-density relationships at the population level. Invalid predictions of MST are likely to occur where competition occurs belowground (symmetric) rather than aboveground (asymmetric).
3. I introduced the new concept of modes of facilitation, i.e. symmetric versus asymmetric facilitation, and developed an individual-based model to explore how the interplay between different modes of competition and facilitation changes spatial pattern formation in plant populations. The study shows that facilitation by itself can play an important role in promoting plant aggregation independent of other ecological factors (e.g. seed dispersal, recruitment, and environmental heterogeneity).
In the last part of my study, I went from population level to community level and explored the possibility of combining MST and unified neutral theory of biodiversity (UNT). The analysis of extensive data confirms that most plant populations examined are nearly neutral in the sense of demographic trade-offs, which can mostly be explained by a simple allometric scaling rule based on MST. This demographic equivalence regarding birth-death trade-offs between different species and functional groups is consistent with the assumptions of neutral theory but allows functional differences between species. My initial study reconciles the debate about whether niche or neutral mechanisms structure natural communities: the real question should be when and why one of these factors dominates.
A synthesis of existing theories will strengthen future ecology in theory and application. All the studies presented in my dissertation showed that the approaches of individual-based and pattern-oriented modelling are promising to achieve the synthesis.
|
Page generated in 0.1975 seconds