A fibroína da seda (SF) é uma proteína fibrosa, com caráter hidrofóbico, produzida pelo bicho-da-seda (Bombyx mori L.), cuja produção e armazenamento ocorre em glândulas especializadas antes do processo de fiação em fibras. Recentemente, soluções de fibroína de seda regenerada (RSF) têm sido utilizadas para formar diferentes materiais tais como géis, membranas, filmes e esponjas, para aplicações médicas (Medicina Regenerativa) e em sistemas de liberação de fármacos. Neste trabalho, procuramos estudar o comportamento da solução RSF 2% com adição de 0,25, 0,5 e 1% de PVA (polímero sintético e hidrofílico) por meio de ensaios de reologia dos géis obtidos (SF:PVA), e caracterização das membranas obtidas por meio da secagem em moldes dos géis. Os ensaios de reologia mostraram uma inversão de módulos, com transição de caráter elástico (G\') para viscoso (G\") para SF1 a 3%, entre 230 e 900% de deformação (\'gama\'); transição de caráter viscoso para elástico para as blendas SF:PVA 0,5 e 1% em ensaio de frequência (\'ômega\'). Com o aumento de temperatura, todas as blendas mantiveram seus comportamentos elástico (SF:PVA 0,25%) e viscoso (SF:PVA 0,5 e 1%) até 49 - 51°C, com transição líquido-gel; o aumento dos módulos G\' e G\"com o resfriamento das amostras ocorreu em todas as blendas. As membranas obtidas das blendas SF:PVA tiveram maior absorção de tampão fosfato salino (PBS) após 5 min de ensaio, no qual a blenda SF:PVA apresentou maiores valores de absorção. A caracterização das membranas por FT-IR ATR e DRX mostrou que ocorreu uma transição de conformação aleatória e hélice \'alfa\' para folha \'beta\', para todas as membranas, indicando que a adição do PVA nas blendas promoveu transições silk I para silk II. Deslocamentos de modo vibracional de 1.637/cm (amida I) para 1.616/cm (amida I) com modo centrado em 1.512/cm (amida II) foram vistos em todas as blendas no FT-IR ATR, e difratogramas apresentaram picos característicos às estruturas silk I (2\'teta\' = 10,12º, 2\'teta\' = 12,2° e 2\'teta\' = 28,2º) e silk II (2\'teta\' = 20 - 21 °1). TGA e DSC mostraram uma interação entre as cadeias de RSF c PVA, pela presença de uma temperatura única ele transição vítrea (Tg) entre RSF e PVA. Imagens AFM das blendas mostraram a presença de estruturas nanofibrilares, em formato de ilhas compactas e ramos, confirmando a transição da fase amorfa de SF 2% para hélice \'alfa\' e folha \'beta\', com a adição do PVA. / Silk fibroin (SF) is a fibrous hydrophobic protein produced by silkworms (Bombyx mori L.), which production and storage occur into specialized glands previously fiber formation. Lately, regenerated silk fibroin (RSF) solutions have been used to produce different materials such as gels, membranes, films and sponges, for medical applications and drug delivery systems. In this study, the RSF with 0.25, 0.5 anel 1% PVA (synthetic and hydrophilic polymer) blends were characterized by rheological tests of the gels (SF:PVA), also membranes produced by casting process were characterized as well. Rheological tests showed moduli inversion with elastic to viscous behavior transition for SF 1 to 3%, between 230 anel 900% of strain (\'gama\'); a transition fram viscous to elastic behavior to SF:PVA 0.5 to 1% blends into frequency sweep tests was observed. With the temperature increment, all blends have kept their viscous anel elastic behavior until 49 - 51°C, and a liquid-gel transition occurred in the SF:PVA 0.5 and 1% blends, as well as all moduli have increased with the cooling stage of the samples. All membranes had the highest buffer absorption after 5 min of test, in which SF:PVA 0.5% blend presented high absorption values. FT-IR spectra and XRD diffractograms showed a transition from random and \'alfa\'-helix to \'beta\'-sheet, for all blends, indicating that PVA addition promotes silk I to silk II transition. Modal shifts were observed from 1.637/cm (amide I) to 1.616/cm (amide I) with a central mode in 1.512/cm (amide II) in all blends in the FT-IR ATR spectra. XRD diffractograms showed characteristic peaks of silk I structures (2\'teta\' = 10,12°, 2\'teta\' = 12,2° e 2\'teta\' = 28,2°) and silk II structures (2\'teta\' = 20 - 21 °1). TGA and DSC studies showed the possibility of interaction between SF and PVA chains by acquirement of mobility at once, at an intermediate temperature between SF anel PVA glass transition (Tg). AFM images exhibited different phases for all membranes, with the presence of nanofibers, wires, rods and branch islands, suggesting the formation of more organized structures, such as and \'alfa\'-helix and \'beta\'-sheet, with PVA addition.

Os polímeros sintéticos compõem cerca de 20% do lixo urbano no Brasil. Além da não biodegradabilidade, formam uma camada impermeabilizante que impede a passagem de líquidos e gases originados no apodrecimento dos detritos, retardando a estabilização da matéria orgânica. A exploração da madeira produz uma grande quantidade de rejeitos que não são inteiramente aproveitados para gerar energia ou outros produtos, e acarreta sérios problemas ambientais. A finalidade deste trabalho é a produção de compósitos biodegradáveis reunindo rejeitos de madeira e um polímero biodegradável - o poli (álcool vinílico) [PVA]. Para facilitar a degradação do PVA, este foi modificado por anidrido ftálico (AF). A modificação foi estudada através de tempo de gelatinização, calorimetria exploratória diferencial (DSC) e análise termomecânica dinãmica (DMTA). Resíduos da madeira Sugi (Criptomeria japonica) foram refinados até a obtenção de uma farinha com partículas menores que 63 µ m. Esta farinha foi adicionada ao meio de reação AF/PVA. As proporções de AF e PVA, bem como os parâmetros utilizados na prensagem foram determinados segundo um planejamento estatístico fatorial. Os compósitos foram moldados a quente (180 C e 50 MPa). Variando-se a proporção AF/PVA, compósitos com valores de módulo de elasticidade (MOE) de ˜10 GPa e módulo de ruptura (MOR) de ˜90 MPa na flexão foram obtidos. Os valores são inferiores aos apresentados pelo polímero puro, seco e sem plasticizante (acima de 152 MPa), porém superiores às placas de madeira reconstituída de MDF e OSB, disponíveis comercialmente, que apresentam valores de MOR em torno de 49 MPa. A degradação por microorganismos foi avaliada pelo ensaio de soterramento utilizando uma adaptação do método para avaliar a resistência de materiais lignocelulósicos aos fungos da podridão mole (Publicação IPT No. 1157 D5). Os fungos da podridão mole que ocorreram naturalmente nos compósitos foram isolados e identificados segundo a técnica do microcultivo. O gênero mais frequente foi o celulolítico Trichoderma spp. e o mais degradador foi o Chaetomium spp. As mudanças na estrutura e na morfologia dos compósitos foram estudadas através de espectroscopia de infravermelho (IR) e microscopia eletrônica de varredura (MEV). As perdas de massa e das propriedades mecânicas foram monitoradas em intervalos pré-estabelecidos. Compósitos com altas concentrações de AF apresentaram biodegradabilidades superiores à da madeira maciça de Pinus sp. e levemente inferiores à da madeira de Eucalyptus grandis, utilizadas como referências. A biodegradabilidade se deve à facilidade dos grupos ésteres, dos ftalatos de PVA e de celulose, de serem hidrolizados e de regenerar o ácido ftálico. Mesmo sob hidrólise enzimática, a estrutura PVA-AF-celulose, que forma ligações cruzadas entre microfibrilas de celulose, não se desintegra, conservando as propriedades mecânicas por muito tempo. Estas se mantêm superiores, ao término de 180 dias de exposição, às da madeira maciça de Sugi antes de entrar no processo de biodegradação. Uma correlação entre a estrutura, as propriedades físicas e mecânicas, e a taxa de biodegradação dos compósitos de rejeitos de madeira-PVA foi estabelecida. / Synthetic polymers constitute around 20% of urban solid waste in Brazil. Besides being non-biodegradable, they form an impermeable barrier that prevents the liberation of liquids and gas originated in the waste deterioration, retarding organic matter stabilization. The wood industry produces large amounts of waste wood which is not entirely utilized to produce energy or other products, and it brings several environmental problems. The aim of this study is the production of an environmentally friendly wood-based product composed of waste wood and poly (vinyl alcohol) [PVA]. PVA is the most widely produced water soluble and biodegradable synthetic polymer worldwide. However, PVA degradation in aqueous and soil environments has proved to be quite slow under unadapted conditions. To accelerate its degradation, the PVA has been modified by phthalic anhydride (AF). These modifications have been studied by means of gelation time, Differential Scanning Calorimetry (DSC) and (Dynamic Mechanical Thermal Analysis (DMTA). Sugi (Criptomeria japonica) flour (particles size ‹ 63 µm) has been obtained by milling waste samples. Wood flour has been added into AF/PVA reaction medium. AF and PVA ratios and pressing conditions have been set by factorial design. The final pressing temperature and pressure have been set as 180 °C and 50MPa respectively. Varying AF/PVA ratios, composites presenting modulus of elasticity (MOE) values of ˜10GPa and modulus of rupture (MOR) of ˜90 MPa have been obtained. The MOR values are lower than that presented by the pure, dry, no plasticized PVA (higher than 152 MPa), but they are higher than commercial MDF (medium density fiberboard) and OSB (oriented strand board) of around 49 MPa. Degradation by microorganisms has been performed by soil burial test (method adapted from IPT Edition No. 1157 D5). Naturally occurring soft rot fungi have been isolated and identified according to micro cultivation techniques. Most frequent genus has been the cellulolytic Trichoderma spp. and most degrader has been Chaetomium spp. Changes in the composites microstructures and morphology throughout the biodegradation process have been studied by IR and SEM and decreasing in the mechanical properties monitored. The weight Ioss shown by composites with high AF concentration has been higher than the softwood Pinus sp. and comparable to the hardwood Eucalyptus grandis, utilized as witnesses. Even under enzymatic hydrolysis, the PVA-AF-cellulose structure has been only slightly broken, preserving considerable mechanical properties that remain superior to solid Sugi before entering any biodegradation process, even after 180 days of exposure. A correlation has been established between the structure, physical and mechanical properties and biodegradation rate of waste wood-PVA composites

Dizertační práce se zabývala syntézou a studiem kompozitních materiálů pro potenciální lékařské využití. Teoretická část je zaměřena na biomateriály, zejména na kompozity složené z polyvinylalkoholu a hydroxyapatitu(PVA/HA). Byly připraveny kompozitní membrány složené z polyvinylalkoholu s různým hmotnostním zastoupením hydroxyapatitu - 0%, 10%, 20%, 30%, 40% a 50%. Hydroxyapatit (HA) byl připraven srážecí metodou z hydrogenfosforečnanu amonného a tetrahydrátu dusičnanu vápenatého ve vodném alkalickém prostředí. Vzniklá suspenze se smísila s roztokem polyvinylalkoholu, který byl připraven rozpuštěním ve vodě o teplotě 85° C. Jednotlivé směsi byly odlity do formy a sušeny po dobu 7 dní při teplotě 30 ° C, vzniklé 0,5 mm tenké membrány byly analyzovány ATR-FTIR spektroskopií k identifikaci funkčních skupin v kompozitu, dále byla provedena XRD analýza. Zkouška tahem a TGA měření byly realizovány k určení vlivu HA na mechanické vlastnosti, respektive změnu tepelné odolnosti kompozitů ve srovnání s čistým PVA. Byla provedena zkouška bioaktivity v simulovaném krevním roztoku (SBF) po dobu 2h, 7 a 28 dnů. SEM byla použita k charakterizaci povrchové mikrostruktury biocompositních membrán před a po ponoření do SBF. Na povrchu testovaných membrán vznikla vrstva apatitu, která je charakteristická pro bioaktivní materiály. Bylo zjištěno, že s rostoucím množstvím HA částic docházelo ke vzniku aglomerátů v kompozitu, které vznikly mimo jiné jako důsledek růstu krystalů HA během sušení membrán. Bioaktivita rostla s delším působením SBF na vzorky.

Emulsion polymerizations of vinyl acetate (VAc) were performed by fully or partially replacing poly(vinyl alcohol) (PVA) with renewable materials as protective colloids or by adding renewable materials, as additives or fillers, to the emulsions during or after polymerization. The purpose of the study was to increase the amount of renewable materials in the emulsion. A total of 19 emulsions were synthesized. Different recipes were used for the synthesis. The following renewable materials were studied; hydroxyethyl cellulose (HEC) with different molecular weights, starch and proteins. HEC and starch were used as protective colloids. Proteins were used as additives or fillers. Cross-linking agent A and Cross-linking agent B were used as cross-linking agents. A total of 26 formulations were pressed, either cold or hot. The synthesized emulsions were evaluated with respect to pH, solids content, viscosity, minimum film formation temperature (MFFT), glass transition temperature (Tg), particle size and molecular weight (Mw). The tensile shear strengths of the emulsions were evaluated according to EN 204 and WATT 91. It was possible to fully, or partially, replace PVA as protective colloid with renewable materials. It was also possible to use renewable materials as additives or fillers in the emulsions. The emulsions obtained properties that differed from the reference. Generally, emulsions with HEC as protective colloid showed lower viscosity and slightly higher MFFT, Tg and molecular weight than emulsions with PVA as protective colloid. Larger particle sizes than the reference were obtained for emulsions containing PVA combined with renewable materials. The emulsion with starch as protective colloid exhibited the largest particle size. 10 formulations passed the criteria for D2. The emulsions where PVA was fully or partially replaced with HEC or starch showed a water resistance similar to the reference (around D2). The addition of protein did not decrease the water and heat resistance compared to the reference. Addition of protein after polymerization increased the water resistance (D2) compared to addition during polymerization. Addition of cross-linking agents did not increase the water resistance further. Two formulations passed the criteria for D3. The emulsion in the first formulation had PVA as protective colloid and protein B was added during polymerization. The emulsion in the second formulation had HEC as protective colloid. To both of these emulsions, protein A was added after polymerization, as a filler, combined with Cross-linking agent B as cross-linking agent before hot pressing. The first formulation also showed a good heat resistance (passed the criteria for WATT 91).

In radiation therapy, gel dosimetry is used to measure radiation doses for treatment verification. Gel dosimeters have the ability to record dose information in three dimensions. The objective of this thesis was to fabricate a transparent cryogel radiochromic dosimeter with poly(vinyl alcohol) (PVA) as the gelling agent. A transparent dosimeter may be analyzed using an optical read out technique, which is desirable. PVA cryogels can be made transparent by adding dimethyl sulfoxide (DMSO). Measurements of dose response were performed and various parameters were adjusted, including: numbers of freeze-thaw cycles (FTCs); concentrations of PVA; DMSO concentration. The measured absorption coefficient increased linearly with dose up to approximately 10 Gy. The sensitivity was increased for higher PVA concentrations, larger numbers of FTCs, and less DMSO. The resulting dosimeter was stable and showed no significant dose rate or photon energy dependence. The cryogels were later formed into 5 mm thick films and used as a tool for performing in vivo dosimetry. The dose response of the radiochromic bolus was characterized by irradiating it on a flat surface at different gantry angles. The dose measured in the bolus was approximately 0.80 of the dose measured by Gafchromic film at the skin surface, taking the obliquity into account. IMRT treatments were delivered to a RANDO phantom. The radiochromic bolus was used to measure skin surface dose in two dimensions at various locations. The 0.80 factor was used to calibrate the bolus, which was then compared to an accompanying film measurement. Good agreement was observed between the measurements (>95% gamma pass rate), suggesting the radiochromic bolus may be suitable for in vivo applications. The radiochromic bolus was then used to evaluate errors associated with the breath hold technique often used with left chest wall tangential irradiation. Treatment plan incorporating the radiochromic bolus was delivered at the planned position and shifted anterior-posteriorly (A/P) up to 5 mm. Large discrepancies from the planned two dimensional skin surface distribution were observed for shifts as small as 3 mm in the A/P direction. The study demonstrated that the cryogel was sensitive to small positioning uncertainties for chest wall irradiations, potentially allowing for the detection of clinically relevant errors. Other potential formulations of PVA-based radiochromic cryogels are discussed briefly as avenues to future research projects. / Thesis / Doctor of Philosophy (PhD)

Plastics are a class of materials known for their cost and property advantages, increasing significantly in their usage worldwide. Unfortunately, these benefits come with an increasingly concerning environmental impact. A combination of inadequate disposal options and combinations of materials have led to environmental disasters that will impact generations. One of the worst areas for plastic waste is food packaging. Plastic as a material generally excels at durability and longevity, but as food packaging, it outlives its intended purpose by several orders of magnitude. This leads to plastic food packaging materials sitting in landfill or leading to the environment for hundreds of years. Because of this, there is a strong motivation to develop food packaging materials that are biodegradable, yet still maintain the properties that make plastic better than other classes of materials. Food packaging has many forms, but in general, the most important aspects are cost, mechanical, and oxygen and water barrier properties. To achieve an end-product that excels in these aspects, combinations of materials called composites may be developed. Nanocomposites are a subcategory of composites composed of a matrix material and nanomaterials, separate phases that interact with one another in a number of ways. This research is focused on increasing the mechanical and barrier properties of polyvinyl alcohol, the most commercially-viable biodegradable polymer. The nanomaterials used were graphene oxide (GO) and cellulose nanofibers (CNF) for mechanical and barrier reinforcement. Five sample compositions were produced: a control PVA, CNF, 1 wt% GO, 5 wt% GO, and 10 wt% GO, which were drawn down on uncoated paper and cast by themselves. Testing of these nanocomposites included oxygen transmission, mechanical, and thermal property analysis, and various solvent-interaction testing including absorption of water and oil, Cobb testing, and water vapor permeation. With the addition of CNF and GO to PVA, there was an observed increase in barrier properties through a reduction of hydrophilicity and water absorption, and oxygen permeability.

Osteoarthritis and cartilage deterioration are favored by meniscetomy, which is the ablation of the meniscus from the knee joint. Meniscectomy can be partial or total. This procedure is performed when meniscus lesions and tears or the degeneration of the meniscus caused by its natural dehydration occur. There is a peak of meniscal lesions observed between 20 and 29 years old. Alternative methods such as sutures fail in that they present a short term solution which is ideal for a less active, older generation. A long term solution is needed for a younger population to reduce the number of surgical procedures over the lifetime of this active group. There is a crucial need for a functional implant designed in the image of the native meniscus. Blends of poly (vinyl alcohol) PVA and poly (vinyl pyrrolidone) (PVP) present a potential solution. PVA has shown similar characteristics to soft tissues. PVP further stabilizes the hydrogel network. This work is the mechanical characterization of PVA/PVP (99:1) hydrogels under physiological conditions. Equilibrium swelling in a medium replicating the ionic and the osmotic content of the synovial fluid was investigated during 35 days. The mass retention of hydrogels was characterized using data obtained from the swelling study and was examined as a function of the cross link density and the polymer content. The modulus of hydrogels was obtained in unconfined compression, first at a strain rate slow enough to ignore fluid flow in and out of the gels, and subsequently at a physiological strain rate of walking. Results indicate that PVA/PVP hydrogels volume swelling ratio and weight swelling ratio show no significant difference for most formulations by the 14th day of immersion. A few hydrogels would reach equilibrium by day 21. Additionally, percentage polymer mass retention increases with the cross link density. However, there is no consistent trend with the polymer content. All formulations with 10% wt of polymer show the highest mass retention while 15% wt show the lowest. Interestingly, the mechanical characterization of hydrogels at 100%/min strain rate shows that 15% wt is the only formulation whose compressive modulus falls within the targeted range whereas 10% wt proves to not be stiff enough. 20% wt and 25% wt are always too stiff. Results obtained from unconfined compression at the physiological strain rate, that is 1920%/min, are rather inconclusive. There is not enough consistency in the literature to narrow the results down to one successful candidate formulation. The modulus range obtained at physiological strain rate encompasses the range obtained at 100%/min strain rate. The highest modulus value obtained is 10 times higher at physiological strain rate than the modulus of a real human meniscus obtained at 100%/min strain rate. It is not reasonable at this time to make a choice of a formulation at physiological strain rate due to high variability of the modulus of a human meniscus as a result of its intrinsic anisotropy. All formulations tested would be considered successful candidates, which is irrational considering the difference in their stiffness. / Mechanical Engineering

Conventional studies of ionomers have focused on ionomers bearing monovalent carboxylate or sulfonate pendant ions. There are relatively fewer studies on ionomers containing multivalent pendant ions, such as divalent phosphonate. In this dissertation, poly(ethylene terephthalate) (PET) and polystyrene ionomers with divalent phosphonate pendant ions have been synthesized, and the influence of divalent phosphonate pendant ions on the structure-morphology-property relationship has been compared to the ionomers with monovalent sulfonate pendant ions. The phosphonate groups generated a stronger physically crosslinked network in phosphonated ionomers as compared to sulfonated analogues. Higher plateau modulus, longer relaxation time, and significantly higher zero-shear viscosity were noted for phosphonated ionomers by a dynamic melt rheology study. Compared to the ionic aggregates generated from sulfonate groups, larger ionic aggregates with associated phosphonate groups have been observed. Furthermore, phosphonated ionomers displayed significantly higher glass transition temperatures than sulfonated ionomers. Ionomers have proven to be attractive, interfacially active compatibilizers for a number of polymer blend systems because of specific interactions that may develop between the ionic groups and complementary functional groups on other polar polymers within the blends. The successful compatibilization of polyester/polyamide blends (prepared by solution mixing and melt blending methods) using phosphonated PET ionomers as a minor-component compatibilizer has been demonstrated. The phase-separated polyamide domain dimension decreased with increasing mol % phosphonated monomers and this decrease was attributed to the specific interactions between the ionic phosphonate groups on the polyester ionomer and the amide linkages of polyamide. More importantly, the divalent phosphonate pendant ions are more effective at compatibilizing polyester/polyamide blends in comparison to the monovalent sulfonate pendant ions. Phosphonated PET ionomer-compatibilized polyester/polyamide blends required 6 times fewer ionic monomers to achieve domain dimension < 1 μm as compared to sulfonated PET-containing blends. Deep eutectic solvents (DES) have been reported to be the next generation solvents due to the superior biocompatibility, biodegradability, and sustainability as compared to ionic liquids. Two types of deep eutectic solvents, choline chloride : malic acid (ChCl:MA) and L-arginine : levulinic acid (Arg:LA), have been demonstrated as effective plasticizers for poly(vinyl alcohol) (PVOH) films. The plasticization effects on the properties of PVOH films were evidenced by lower crystallizability and improved film ductility. In addition, ChCl:MA deep eutectic solvent was more effective in plasticizing PVOH as compared to propylene glycol, one of the most widely studied alcohol-type plasticizers. From an applied perspective, DES-plasticized PVOH film is a promising candidate in the packaging market of heath-related products. / Doctor of Philosophy / Non-covalent interactions play an important role on the structure-morphology-property relationship of polymeric materials. Divalent phosphonate pendant ions provide interesting effects on the properties of ionomer and polymer blends as compared to the monovalent sulfonate pendant ions. Ionomers containing phosphonate pendant ions exhibit a significantly stronger physically crosslinked network as compared to sulfonated ionomers. Compared to monovalent sulfonate groups, the divalent phosphonate groups are more effective at compatibilizing polymer blends. Furthermore, the compatibilized poly(ethylene terephthalate)-based blends exhibit improved optical and oxygen barrier properties compared to the base blend without compatibilizer, signifying potential benefits in packaging industry. Poly(vinyl alcohol) is one of the most widely used packaging materials for food, medicine, detergent, etc. The incorporation of deep eutectic solvents as plasticizers significantly improved film ductility. In addition, the plasticization effect for choline chloride-based deep eutectic solvent is more profound than one of the most widely studied alcohol-type plasticizers, propylene glycol. The effective plasticization of poly(vinyl alcohol) using deep eutectic solvents confirmed the potential for future applications in the packaging market of health-related product.

The objective of this research is to develop a water-based processing method for incorporating large filler loadings into nanocomposite systems. Specifically, cellulose nanocrystal/poly(vinyl alcohol) (CNC/PVA) nanocomposite aqueous suspensions and films were processed and characterized at CNC loadings up to 67 wt.% with respect to polymer concentration. Both aqueous suspended and freeze-dried CNCs were studied with this method. Two methods for incorporating the CNCs were investigated: solution processing and batch mixing of aqueous suspensions. The materials produced by these methods were characterized using rheology of aqueous suspensions and a method for understanding the morphology of these aqueous suspension through rheological characterization was developed. The CNC/PVA suspensions were dried and the structure of the film studied using x-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry. With regard to characterization of polymer structure by these methods, PVA crystallinity was seen to increase with increasing CNC loading. Finally, dynamic mechanical analysis and micro-tensile testing were conducted on consolidated films and CNCs were seen to increase modulus, yield stress but decrease strain at failure. Biodegradation studies were also conducted and CNCs were seen to increase the biodegradation characteristics of PVA. While the general trends in experimental data were the same, differences in properties between systems made with solution processing and batch mixing were observed, attributed to differences in the CNC dispersion. Overall, results indicated that this methodology is feasible for the industrially scalable production of highly loaded nanocomposites.

Com a alta taxa de desertificação dos solos e a necessidade de irrigação constante dos plantios, existe a necessidade da criação de um polímero superabsorvente (SAP) com a característica de ser biodegradável. Observando o estágio tecnológico relacionado às atividades de pesquisa e desenvolvimento de SAPs no Brasil, foi utilizado o poli (álcool vinílico)/PVA e o amido de mandioca para a formação de hidrogéis a partir de blendas poliméricas. Assim, soluções aquosas desses polímeros foram reticuladas quimicamente, usando o glutaraldeído como agente reticulante e comparadas com amostras reticuladas por radiação gama, irradiadas a uma dose de 25 kgy. Os hidrogéis resultantes foram caracterizados por diversas técnicas analíticas como a fração gel, o intumescimento em água destilada, a espectroscopia de infravermelho com refletância total atenuada ATR (FT-IR), a termogravimetria (TG/DTG), a calorimetria exploratória diferencial (DSC) e a microscopia eletrônica de varredura (MEV). Observou-se uma maior reticulação nos hidrogéis reticulados com o glutaraldeído e em consequência um menor grau de intumescimento quando comparadas com as amostras que foram irradiadas. Com vias a produzir hidrogéis em uma escala industrial, misturas de PVA e amido foram processadas por extrusão reativa, mudando assim o processo de preparação de solução aquosa para misturas secas. Foram extrudadas amostras de PVA com diferentes pesos moleculares tais como o PVA 26-88, o PVA 40-88, o PVA 110-99 e o poli (ácido glioxílico vinílico)/PVGA, este último sintetizado a partir da modificação do PVA 110-99. Foi adicionado na mistura o ácido glioxílico no desenvolvimento do SAP por reticulação química nas amostras do PVA, por ter grupos carboxílicos que podem aumentar o intumescimento e também servir como agente reticulante. Também foram feitas formulações de extrusão sem o ácido glioxílico para serem usados como brancos. Adicionou-se nas misturas diversos agentes plastificantes como a glicerina e o polietilenoglicol (PEG 400) e as propriedades mecânicas foram estudadas. Foram desenvolvidas duas análises fatoriais de 23 para analisar as mudanças na reticulação das formulações. Os pellets foram caracterizados com as mesmas técnicas analíticas que os hidrogéis feitos em solução, adicionando-se análises de intumescimento e reversibilidade de intumescimento em diversos solventes como a água pura, a água da chuva, as soluções tampão de pH 3, pH 7 e pH 10, além de soro fisiológico, visando a aplicação em diferentes solos com diferentes pH e salinidades. Os testes de intumescimento em diferentes sais demonstraram a ter menor retenção de água quando comparada com água pura. Os testes de reversibilidade de intumescimento dos pellets mostraram que a maioria das formulações perde a sua capacidade de intumescimento máximo aos seis primeiros ciclos. Foi feita a compressão dos pellets para observar a flexibilidade dos mesmos, visando aplicações debaixo do solo. Realizou-se um estudo de biodegradação em terra ao longo de 120 dias, e estudou-se a relação direta com os valores da fração gel. Os resultados mostraram que os pellets menos reticulados intumesceram mais, enquanto as microscopias mostraram que essas amostras tinham uma morfologia mais porosa, o que contribuiu na melhora na retenção do líquido. Além disso, eram mais flexíveis e biodegradaram mais rápido, sendo extremamente viáveis para a aplicação na agricultura. Foi verificado que o PVA 40-88 apresentou os melhores valores de intumescimento em diferentes sais. Com o SAP obtido, foi constatado que a extrusão reativa é um método viável para a produção dos SAPs. / With high soil desertification rate and the need for constant irrigation of the plantations, there is the need to create a superabsorbent polymer (SAP) with the characteristic of being biodegradable. Noting the technological stage related to research and development activities of SAPs in Brazil, we used poly (vinyl alcohol)/PVA and cassava starch for the formation of hydrogels from polymer blends. Thus, aqueous solutions of these polymers were chemically crosslinked using glutaraldehyde as crosslinking agent and compared to samples cross-linked by gamma irradiation, irradiated the a dose of 25 kgy. The resulting hydrogels were characterized by various analytical techniques such as gel fraction, swelling in distilled water, infrared spectroscopy with attenuated total reflectance (ATR-FTIR), thermogravimetry (TG/DTG), the differential scanning calorimetry (DSC) and the scanning electron microscopy (SEM). There was a higher crosslink in the hydrogels crosslinked with glutaraldehyde and consequently a lower degree of swelling as compared to samples that were irradiated. With routes to produce hydrogels on an industrial scale, PVA and starch mixtures were processed by reactive extrusion, thus changing the aqueous solution preparation process to dry mix. PVA samples were extruded with different molecular weights such as PVA 26-88, PVA 40-88, PVA 110-99 and poly (vinyl glyoxylic acid)/PVGA, the latter synthesized from the modified PVA 110-99. It was added to the mixture glyoxylic acid in the SAP development by chemical crosslinking of the PVA sample for having carboxyl groups that may increase the swelling and also serve as crosslinker. Also extrusion formulations were made without the glyoxylic acid to be used as white. Was added to the mixture, various plasticizers such as glycerin and polyethylene glycol (PEG 400) and the mechanical properties were studied. two factor analyzes were developed from 23 to analyze the changes in crosslinking formulations. The pellets were characterized with the same analytical techniques that hydrogels made in solution by adding analyzes swelling and swelling of reversibility in various solvents such as pure water, rain water, pH buffer solutions 3, pH 7 and pH 10, in addition to saline solution, aimed at application in different soils with different salinities and pH. swelling tests at different salts shown to have lower water retention when compared to pure water. The pellets reversibility of the swelling tests showed that most formulations loses its swelling capacity up to the first six cycles. The compression of the pellets was taken to observe their flexibility, targeting applications underground. We conducted a study of biodegradation on land over 120 days, and studied the direct relationship with the gel fraction values. The results showed that the pellets swelled more crosslinked least while microscopy showed that these samples had a more porous morphology, which contributed to the improvement in fluid retention. Moreover, they are more flexible and biodegrade more rapidly and are extremely viable for use in agriculture. It has been found that PVA 40-88 showed better swelling values at different salts. With SAP obtained, it was found that the reactive extrusion is a viable method for the production of SAPs.