<p>This study firstly reports the development, characterisation, and application of thick-film acetylcholinesterase (AChE) biosensors based on a gold electrode modified with a mercaptobenzothiazole (MBT) self-assembled monolayer and either poly(omethoxyaniline) (POMA) or poly(2,5-dimethoxyaniline) (PDMA) in the presence of polystyrene(4-sulphonic acid) (PSSA). The Au/MBT/POMA-PSSA/AChE and Au/MBT/PDMA-PSSA/AChE biosensors were then applied to successfully detect standard organophosphorous and carbamate pesticides in a 0.1 M phosphate buffer, 0.1 M KCl (pH 7.2) solution. Secondly, it reports the construction of the Au/MBT/PANI/AChE/PVAc thick-film biosensor for the determination of certain organophosphate and carbamate pesticide solutions in selected aqueous organic solvent solutions.</p>

Following the discovery of electronic conductivity in doped polyacetylene, various studies on conducting polymers have been investigated. These polymers are essentially characterized by the presence of conjugated bonding on polymer backbone, which facilitates formation of polarons and bipolarons as charge carriers. Poly(3,4-ethylenedioxythiophene) (PEDOT) is an interesting polymer because of high electronic conductivity, ease of synthesis and high chemical stability. Electrochemically prepared PEDOT is more interesting than the polymer prepared by chemical routes because it adheres to the electrodes surface and the PEDOT coated electrodes can directly be used for various applications such as batteries, supercapacitor, sensors, etc. A majority of the studies described in the thesis are based on PEDOT. Studies on polyanthanilic acid and reduction of hydrogen peroxide on stainless steel substrate are also included. Chapter 1 provides an introduction to conducting polymers with a focus on synthesis, electrochemical characterization and applications of PEDOT. In Chapter 2, microscopic and impedance spectroscopic characterization of PEDOT coated on stainless steel (SS) and indium tin oxide (ITO) coated glass substrates are described. Electrosynthesis of PEDOT is carried out on SS electrodes by three different techniques, namely, potentiostatic, galvanostatic and potentiodynamic techniques. The SEM images of PEDOT prepared by the galvanostatatic and potentiostatic routes indicate globular morphology. However, it is seen that porosity increases by increasing the current or the potential. In the cases of both galvanostatic and potentiostatic routes, the oxidation of EDOT to form PEDOT takes place continuously during preparation. However, in the case of potentiodynamic experiment between 0 and 0.9 V vs. SCE (saturated calomel electrode), the formation of PEDOT occurs only when the potential is greater than 0.70 V. During multicycle preparation to grow thicker films of PEDOT, formation of PEDOT takes place layer by layer, a layer of PEDOT being formed in each potential cycle. PEDOT prepared in the potential ranges 0-0.90 V and 0-1.0 V show globular morphology similar to the morphology of the galvanostatically and potentiostatically prepared polymer. If prepared in the potential ranges 0-1.1 V and 0-1.2 V, the PEDOT films have rod-like and fibrous morphology. This is attributed to larger amount of PEDOT formed in each cycle in comparison with lower potential ranges and also to partial oxidation of PEDOT at potentials ≥ 1.10 V. PEDOT is also electrochemically prepared on ITO coated glass substrate. Preparation is carried out under potentiostatic conditions in the potential range between 0.9 and 1.2 V. Atomic force microscopy (AFM) studies indicate a globular topography for PEDOT films prepared on ITO coated glass plates. The height and width of globules increase with an increase in deposition potential. The PEDOT coated SS electrodes are subjected to electrochemical impedance spectroscopy studies in 0.1 M H2SO4. The Nyquist plot of impedance consists of a depressed semicircle, which arises due to a parallel combination of the polymer resistance and double-layer capacitance (Cdl). Impedance data are analyzed. Studies on electrooxidation of methanol, formic acid, formaldehyde and ethanol on nanocluster of Pt and Pt-Ru deposited on PEDOT/C electrode are reported in Chapter 3. Studies on electrooxidation of small molecules are important in view of their promising applications in fuel cells. Films of PEDOT are electrochemically deposited on carbon paper. Nanoclusters of Pt and bimetallic Pt-Ru catalysts are potentiostatically deposited on PEDOT/C electrodes. Catalysts are also prepared on bare carbon paper for studying the effect of PEDOT. The presence of PEDOT film on carbon paper allows the formation of uniform, well dispersed nanoclusters of Pt as well as Pt-Ru catalysts. TEM studies suggest that the nanoclusters of about 50 nm consist of nanoparticles of about 5 nm in diameter. Electrooxidation of methanol, formic acid, formaldehyde and ethanol are studied on Pt-PEDOT/C and PtRu-PEDOT/C electrodes by cyclic voltammetry and chronoamperometry. The data for oxidation of these small organic molecules reveal that PEDOT imparts a greater catalytic activity for the Pt and Pt-Ru catalysts. Results of these studies are described in Chapter 3. In Chapter 4, PEDOT is coated on SS substrate to investigate phenol oxidation. Studies on electrochemical oxidation of phenol are interesting because it is important to remove phenol from contaminated water or industrial effluents. Deactivation of the anode due to the formation and adsorption of polyoxyphenylene on its surface is a common problem for a variety of electrode materials, during phenol oxidation. Investigations on suitable anode materials, which can undergo no or moderate poisoning by polyoxyphenylene, are interesting. In the present study, it is shown that the electrooxidation rate of phenol is greater on PEDOT/SS electrodes than on Pt. Deactivation of PEDOT/SS electrode is slower in relation to Pt. The oxidation of phenol on PEDOT/SS electrode occurs to form both polyoxyphenylene and benzoquinone in parallel. Cyclic voltammetry of phenol oxidation is studied by varying the concentration of phenol, sweep rate and thickness of PEDOT. Ac impedance studies indicate a gradual increase in polymer resistance due to adsorption of polyoxyphenylene during multi sweep cyclic voltammetry. This investigation reveals that PEDOT coated on a common metal or alloy such as SS is useful for studying electrooxidation of phenol, which is generally studied on a noble metal based electrodes. Electrochemically prepared PEDOT is used for supercapacitor studies and the results are presented in Chapter 5. Generally, electronically conducting polymers possess high capacitive properties due to pseudo-faradaic reactions. PEDOT/SS electrodes prepared in 0.1 M H2SO4 are found to yield higher specific capacitance (SC) than the electrodes prepared from neutral aqueous electrolyte. The effects of concentration of H2SO4, concentration of SDS, potential of deposition and nature of supporting electrolytes used for capacitor studies on SC of the PEDOT/SS electrodes are studied. Specific capacitance values as high as 250 F g-1 in 1 M oxalic acid are obtained during the initial stages of cycling. However, there is a decrease in SC on repeated charge-discharge cycling. Spectroscopic data reflect structural changes in PEDOT on extended cycling. Self-doped PANI is expected to possess superior electrochemical characteristics in relation to PANI. The self-doping is due to the presence of an acidic group on the polymer chain. However, self-doped PANI is soluble in acidic solutions against insolubility of PANI. In the present study, poly(anthranilic acid), PANA, is encapsulated in porous Nafion membrane by chemical and a novel electrochemical methods. PANA present in solid form in Nafion membrane does not undergo dissolution in acidic solutions. The methods of preparation and various electrochemical, optical and spectroscopic characterizations studies of PANA-Nafion are described in Chapter 6. Electroreduction of H2O2 is studied on sand-blasted stainless steel (SSS) electrode in an aqueous solution of NaClO4 and the details are reported in Chapter 7. The cyclic voltammetric reduction of H2O2 at low concentrations is characterized by a cathodic peak at -0.40 V versus standard calomel electrode (SCE). Cyclic voltammetry is studied by varying the concentration of H2O2 in the range from 0.2 mM to 20 mM and the sweep rate in the range from 2 to 100 mV s-1. Cyclic voltammograms at concentrations of H2O2 higher than 2 mM or at high sweep rates consist of an additional current peak, which may be due to the reduction of adsorbed species formed during the reduction of H2O2. Amperometric determination of H2O2 at -0.50 V vs. SCE provides the detection limit of 5 μM H2O2. A plot of current density versus concentration has two linear segments suggesting a change in the mechanism of H2O2 reduction at concentrations of H2O2 ≥ 2 mM. From the rotating disc electrode study, diffusion co-efficient of H2O2 and rate constant for reduction of H2O2 are evaluated. Thus, stainless steel, which is inexpensive and a common alloy, is useful for studying electrochemical reduction of H2O2 and also for analytical application. This work is initiated to study the reduction of H2O2 on PEDOT/SS electrodes. As a result of preliminary experiments, it is found that PEDOT does not exhibit any influence on the kinetics of H2O2 reduction. Therefore studies conducted using bare stainless steel are included in this chapter. Results of the above studies are described in the thesis.

This thesis describes recent progress in electrochemical preparation of several conducting polymers. In particular, the synthesis and characterizations of pure polyaniline, pure polypyrrole, polyaniline/polypyrrole and polypyrrole/polyaniline copolymers and polyaniline-polypyrrole physical blends were studied. The focus has included firstly synthesis of these electrically conductive polymers. Secondly, thermal characteristics of electrochemically synthesized homopoly- mers, copolymers and their physical blends were investigated by thermal gravi- metric analysis (TGA), differential scanning calorimetry (DSC) and direct pyrol- ysis mass spectrometry (DIP-MS) techniques. In general, TGA analysis showed three-step thermal degradation. The first, at 100oC, was attributed to water, and unreacted monomers. The second weight losses observed at around 150 oC was because of evolution of water and/or acid. Finally, the removal of the dopant ion and low molecular weight species from the matrix were observed for pure PANI and pure PPy at 230 and 280 oC, respectively. PANI/PPy films and PPy/PANI films have decomposition temperatures at 272oC because of the loss of the dopant ion. It was also observed that pure PPy was thermally more resistant than pure PANI. Thirdly, thermal characteristics, and degradation products of electrochemi- cally prepared PANI/PPy and PPy/PANI films in solutions containing variable dopant (SO42&amp / #8722 / ) concentrations were analyzed and compared with pyrolysis mass spectrometry. Similar to TGA study, there were three main thermal degradation steps namely, evolution of low molecular weight species, dopant based products and degradation products of polymers. The dopant concentration was monitored to optimize the degradation behavior. Pyrolysis mass spectrometry data showed that the degree of degradation of the polymer already coated on the electrode enhanced as the dopant concentration used in synthesis increased.

The main purpose of this work - to investigate patterns of electrochemical oxidation of ascorbic acid on polyaniline and poly(N-methylaniline) modified electrodes, in order to develop ascorbate-sensitive sensors. A detailed study of various factors affecting the aniline and N-methylaniline electrochemical polymerization and the resulting properties of PANI and PNMA layers was carried out for this purpose. Comparative study of modified electrodes in solutions of different acidity was performed and it was shown that PNMA had a better redox activity in slightly acidic and neutral solutions compared to polyaniline. The nature of amperometric response of modified electrodes to ascorbate was investigated and autocatalytic mechanism of ascorbate electrooxidation on PANI modified electrode was suggested. Using PANI and PNMA modified electrodes, prototypes of amperometric ascorbate sensors have been developed and their comparative studies were carried out. / Darbo tikslas - ištirti askorbo rūgšties elektrocheminės oksidacijos ant elektrodų, modifikuotų polianilinu ir poli(N-metilanilinu), dėsningumus, siekiant sukurti jautrius askorbatui jutiklius. Ištirta įvairių faktorių įtaka anilino ir N-metilanilino elektrocheminei polimerizacijai bei gautų PANI ir PNMA sluoksnių savybėms. Atlikti palyginamieji modifikuotų elektrodų tyrimai skirtingo pH tirpaluose ir parodyta, kad PNMA lyginant su polianilinu pasižymi geresniu aktyvumu silpnai rūgščiuose ir neutraliuose tirpaluose. Ištirtas modifikuotų elektrodų amperometrinio atsako į askorbatą pobūdis, ir pasiūlytas autokatalizinis askorbato elektrooksidacijos mechanizmas ant PANI modifikuoto elektrodo. Panaudojus PANI ir PNMA modifikuotus elektrodus, sukurti amperometrinių askorbato jutiklių prototipai ir atlikti jų palyginamieji tyrimai.

<p>This study firstly reports the development, characterisation, and application of thick-film acetylcholinesterase (AChE) biosensors based on a gold electrode modified with a mercaptobenzothiazole (MBT) self-assembled monolayer and either poly(omethoxyaniline) (POMA) or poly(2,5-dimethoxyaniline) (PDMA) in the presence of polystyrene(4-sulphonic acid) (PSSA). The Au/MBT/POMA-PSSA/AChE and Au/MBT/PDMA-PSSA/AChE biosensors were then applied to successfully detect standard organophosphorous and carbamate pesticides in a 0.1 M phosphate buffer, 0.1 M KCl (pH 7.2) solution. Secondly, it reports the construction of the Au/MBT/PANI/AChE/PVAc thick-film biosensor for the determination of certain organophosphate and carbamate pesticide solutions in selected aqueous organic solvent solutions.</p>

<p> <p>&nbsp / </p> <p align="left">&nbsp / </p> <p>&nbsp / </p> </p> <p align="left">The aim of this study was to produce useful composite materials from fly ash, a major waste product of coal combustion from power plants. Polyaniline-fly ash (PANI-FA) composites were prepared by in situ polymerisation of aniline in the presence of Fly Ash (FA) by two slightly different methods. In one case polystyrene sulphonic acid (PSSA) was used as a stabilizer and in another case the starting materials (aniline and FA) were aged before oxidation. The aging procedure formed nanotubes that have cross-sectional diameters of 50-110 nm. The other procedure produced nanotubes with a diameter of 100-500 nm and the length of up to 10&mu / m. The presence of metal oxides and silica in FA were responsible for the formation of nanorods in PANI-PSSA-FA.. The formation of the composites was confirmed by UV-Vis and FTIR. The UV-Vis showed maximum absorbance at 330-360 nm ( due to &pi / -&pi / * transition of benzoid rings) and 600-650 nm(due to charge transfer excitons of quinoid rings), which are characteristics of emaraldine base. The electrochemical analysis of the composites showed that the composites were conductive and electroactive. The Cyclic Voltammetry of PANI-PSSA-FA showed three redox couples which are characteristics of sulphonated PANI. The morphology of the composites was studied by Scanning Electron Microscopy (SEM) and showed that our methods gave composites with improved homogeneity as compared to other reported methods. Thermo Gravimetric analysis (TGA) showed that the presence of FA in the composites improves the thermal stability of the composites by up to 100 0C.<br /> &nbsp / </p>

L'électrorhéologie est un domaine où les possibilités d'accroître les performances en utilisant des composés hybrides organiques-inorganiques ont été explorées. Les fluides électrorhéologiques sont des dispersions de particules colloïdales facilement polarisables par un champ électrique dans un liquide non conducteur. Lorsqu'un champ électrique est appliqué les propriétés rhéologiques changent et la viscosité apparente peut augmenter ou diminuer en fonction du type de particules présentes dans le fluide. Ces fluides appartiennent à la classe des matériaux intelligents qui ont un grand potentiel technologique avec des applications dans de nombreux domaines comme l'automobile, l'hydraulique, les joints d'étanchéité, la robotique, le spatial et même en médecine. Dans ce travail on s'intéresse à trois différentes sortes d'hybride: des silicates avec des molécules organiques (ORMOSIL) modifiés par des groupements mercaptan, des liquides ioniques encapsulés dans la silice, et des fibres de sépiolite recouvertes de polyaniline. Pour la synthèse des particules à base de silice (ORMOSIL) et les liquides ioniques encapsulés dans la silice, on a utilisé le procédé sol-gel. Dans le cas de la polyaniline sur la sépiolite, deux méthodes de polymérisation ont été utilisées: en phase solide et en suspension. Tous les systèmes étudiés ont présenté une réponse électrorhéologique. Parmi eux l'hybride polyaniline/sépiolite a fourni la meilleure réponse électrorhéologique, sans doute à cause de la forme allongée des particules, qui donne une contrainte seuil plus grande que les formes sphériques obtenues pour les hybrides à base de silice.

The first chapter of this thesis describes the motivation behind using room temperature ionic liquids (RTILs) in gas sensor research and reviews current applications of RTILs in various sensors. The second chapter describes electrochemical polymerization of aniline in room temperature 1-butyl-3-methylimmidazolium ionic liquids without addition of any acid. It is shown that the polymerization of aniline in BMI(BF4) does require small but controlled amounts of water whereas the polymerization in BMI(PF6) and in BMI(TF2N) does not require any water addition. The third chapter describes the construction of reference electrodes for RTIL applications that have a known and reproducible potential versus the ferrocene/ ferrocenium couple. They are based on reference electrodes of the first kind, Ag/Ag+ couple type, or of the second kind, based on Ag/AgCl in M+Cl-. The stability, reproducibility, and temperature behavior of the two reference systems have been characterized. The fourth chapter describes the electrochemical preparation and spectral analysis of gold clusters by adding gold atoms one-by-one through polyaniline s ability to form a strong complex with chloroaurate at the protonated imine sites. Our results confirm that both the amount and the size of gold clusters affects the properties of the composite material. The fifth chapter describes the development and characterization of a CHEMFET sensing layer based on a composite of CSA-doped polyaniline (PANI), and the room temperature ionic liquid BMI(TF2N) for the sensing of ammonia gas. The work function responses of the cast films with and without IL are analyzed by step-wise changes of ammonia gas concentration from 0.5 to 694 ppm in air as a function of the mole fraction of IL to PANI. The PANI CSA/BMI(TF2N) layers shows enhanced sensitivities, lower detection limit and shorter response times. The final chapter describes the preparation and characterization of field-effect transistors with mixed ionic-electronic conductors that have been created by varying the ratio of room temperature ionic liquid and emeraldine salt of polyaniline. Transistor with high electronic conductivity (32mol% ES-PANI) and Au gate contact exhibited theoretical behavior of an IGFET; whereas, the purely ionic gate behaved irreproducibly, indicating that a capacitive divider has been formed in the gate.

Philosophiae Doctor - PhD / This study firstly reports the development, characterisation, and application of thick-film acetylcholinesterase (AChE) biosensors based on a gold electrode modified with a mercaptobenzothiazole (MBT) self-assembled monolayer and either poly(omethoxyaniline) (POMA) or poly(2,5-dimethoxyaniline) (PDMA) in the presence of polystyrene(4-sulphonic acid) (PSSA). The Au/MBT/POMA-PSSA/AChE and Au/MBT/PDMA-PSSA/AChE biosensors were then applied to successfully detect standard organophosphorous and carbamate pesticides in a 0.1 M phosphate buffer, 0.1 M KCl (pH 7.2) solution. Secondly, it reports the construction of the Au/MBT/PANI/AChE/PVAc thick-film biosensor for the determination of certain organophosphate and carbamate pesticide solutions in selected aqueous organic solvent solutions. / South Africa

>Magister Scientiae - MSc / Tuberculosis still remains one of the world’s killer diseases. Pyrazinamide (PZA) is one of the most commonly prescribed anti-tuberculosis (anti-TB) drugs due to its ability to significantly shorten the TB treatment period. However, excess PZA in the body caused hepatotoxicity and liver damage. This, together with the resistance of the bacteria to treatment drugs, poor medication and inappropriate dosing, contribute significantly to the high incidents of TB deaths and diseases (such as liver damage). This, therefore, calls for new methods for ensuring reliable dosing of the drug, which will differ from person to person due to inter-individual differences in drug metabolism. A novel biosensor system for monitoring the metabolism of PZA was prepared with a nanocomposite of multi-walled carbon nanotubes (MWCNTs), polyaniline (PANI) and cytochrome P450 2E1 (CYP2E1) electrochemically deposited on a glassy carbon electrode (GCE). The nanocomposite biosensor system exhibited enhanced electro-activity that is attributed to the catalytic effect of the incorporated MWCNTs. The biosensor had a sensitivity of 7.80 μA/ μg mL-1 PZA and a dynamic linear range (DLR) of 4.92 – 160 ng/mL PZA. Bisphenol A (BPA) is a hormone-disrupting chemical used in production of epoxy resins and polycarbonates, which produce various products used on a daily basis. However, BPA can leach out of plastic during normal use and cause health effects such as cancer or disrupt the endocrine system. Moreover, BPA has also been proven to degrade from the containers in landfills and accumulate in groundwater and streams, thereby, polluting the environment while destroying aquatic organisms. Therefore, this also calls for new selective and sensitive methods for the monitoring of BPA. A novel biosensor system for monitoring the oxidation of BPA was prepared from a nanocomposite of polyaniline, polymethyl methacrylate and titanium dioxide nanoparticles, also electrochemically deposited on the GCE. Biosensor fabrication was conducted by immobilization of the enzyme manganese peroxidase (MnP) iii onto the nanocomposite film. The nanobiosensor also revealed enhanced electro activity, attributed to the incorporation of TiO2 nanoparticles. The biosensor system had a sensitivity of 0.3 μA/nM and a detection limit of 0.12 nM. This detection limit falls within the range of the allowed daily intake of BPA as recommended by the Food and Drug Administration (FDA, USA) and other regulatory bodies.