Thesis (M. Dev.) -- University of Limpopo, 2017 / The aim of the study was to examine the challenges of water supply management in Umdoni Local Municipality. Two methods were employed to collect data in the study. The first method involved one-on-one interviews with the participants. An interview guide was used to obtain data pertaining water supply services from a water services manager, a municipal manager and ten (10) ward councillors. The second method entailed analysis of documents within the municipality. In this study findings were based on issues such as prioritization of effective water supply for Umdoni Local Municipality, community consultation and participation, addressing capacity constrains in the Municipality such as human resources, water service infrastructure and skills development. The underlying causes of the water supply problems are based on the basic infrastructure, provision of water supply being very poor and dismal across the area. Water serves as a basic need to which everybody has the right to access, however, water supply is unfortunately disrupted by many factors. The findings in this study shows that poor water supply emanates from many factors such as management skills, technical challenges and illegal connections. This study recommends that Umdoni Local Municipality has additions of water plants, building of new reservoirs and upgrades of water pipes, especially in Amahlongwa area as it needs urgent attention.

abstract: Understanding how microorganisms adapt and respond to the microgravity environment of spaceflight is important for the function and integrity of onboard life support systems, astronaut health and mission success. Microbial contamination of spacecraft Environmental Life Support Systems (ECLSS), including the potable water system, are well documented and have caused major disruption to spaceflight missions. The potable water system on the International Space Station (ISS) uses recycled wastewater purified by multiple processes so it is safe for astronaut consumption and personal hygiene. However, despite stringent antimicrobial treatments, multiple bacterial species and biofilms have been recovered from this potable water system. This finding raises concern for crew health risks, vehicle operations and ECLSS system integrity during exploration missions. These concerns are further heightened given that 1) potential pathogens have been isolated from the ISS potable water system, 2) the immune response of astronauts is blunted during spaceflight, 3) spaceflight induces unexpected alterations in microbial responses, including growth and biofilm formation, antimicrobial resistance, stress responses, and virulence, and 4) different microbial phenotypes are often observed between reductionistic pure cultures as compared to more complex multispecies co-cultures, the latter of which are more representative of natural environmental conditions. To advance the understanding of the impact of microgravity on microbial responses that could negatively impact spacecraft ECLSS systems and crew health, this study characterized a range of phenotypic profiles in both pure and co-cultures of bacterial isolates collected from the ISS potable water system between 2009 and 2014. Microbial responses profiled included population dynamics, resistance to silver, biofilm formation, and in vitro colonization of intestinal epithelial cells. Growth characteristics and antibiotic sensitivities for bacterial strains were evaluated to develop selective and/or differential media that allow for isolation of a pure culture from co-cultures, which was critical for the success of this study. Bacterial co-culture experiments were performed using dynamic Rotating Wall Vessel (RWV) bioreactors under spaceflight analogue (Low Shear Modeled Microgravity/LSMMG) and control conditions. These experiments indicated changes in fluid shear have minimal impact on strain recovery. The antimicrobial efficacy of silver on both sessile co-cultures, grown on 316L stainless steel coupons, and planktonic co-cultures showed that silver did not uniformly reduce the recovery of all strains; however, it had a stronger antimicrobial effect on biofilm cultures than planktonic cultures. The impact of silver on the ability of RWV cultured planktonic and biofilm bacterial co-cultures to colonize human intestinal epithelial cells showed that, those strains which were impacted by silver treatment, often increased adherence to the monolayer. Results from these studies provide insight into the dynamics of polymicrobial community interactions, biofilm formation and survival mechanisms of ISS potable water isolates, with potential application for future design of ECLSS systems for sustainable human space exploration. / Dissertation/Thesis / Masters Thesis Molecular and Cellular Biology 2019

Cette thèse s’intéresse au problème du renouvellement des infrastructures des services de distribution d’eau potable. Nous observons aujourd’hui dans les pays développés qu’une grande partie des canalisations atteint un état d’obsolescence avancé.  La principale conséquence de cette obsolescence est l’apparition de fuites importantes. L’eau perdue dans ces fuites entraîne des pertes économiques liées au gaspillage des ressources investies dans la production d’eau potable, une baisse de qualité de l’eau et des pertes financière. Dans cette thèse j’explore les raisons pour lesquelles le taux de renouvellement des réseaux de distribution d’eau est si faible comparé aux besoins manifestes. Cette thèse est composée de trois chapitres. Dans le premier chapitre, je présente un modèle statique de minimisation des coûts pour obtenir un indice de qualité qui est « cost-efficient ». Cet indice est défini comme une proportion des canalisations de « bonne qualité » par rapport à la longueur totale du réseau. La solution optimale dépend de l’arbitrage entre le coût des pertes en eau par rapport au coût des canalisations de bonne qualité. Lorsque des économies d’échelle liées à la densité du réseau existent, comme dans les services urbains, les pertes en eau représentent un coût important et la réduction des pertes en eau par une augmentation de la qualité du réseau est une solution bénéfique pour les services d’eau. Cependant, nous montrons que les services d’eau dans les milieux ruraux font face à de plus grandes difficultés, à la fois pour pouvoir assurer une réduction des pertes en eau et pour répercuter le coût de renouvellement dans les prix.Dans le deuxième chapitre, je présente un modèle de « optimal switching time » qui étudie la date optimale de renouvellement des infrastructures déterminée à partir d’un modèle de maximisation des profits des services d’eau. Dans ce modèle, nous analysons le choix entre la réhabilitation et le remplacement des canalisations. Cela signifie que les services d’eau peuvent choisir une option moins coûteuse caractérisée par la réhabilitation des vielles canalisations ou le remplacement immédiat qui entraîne un coût nettement supérieur. Les résultats nous montrent que le remplacement direct est un choix plus raisonnable puisque les gains associés à la réduction temporaire des pertes en eau et au prolongement de la durée de vie des canalisations ne compensent pas le coût supplémentaire associé à la réhabilitation. Ceci est particulièrement visible dans le cas des services d’eau en milieux urbain.Dans le troisième chapitre, je présente une étude empirique concernant le taux de remplacement des canalisations dans les services d’eau en France. Les résultats nous montrent que les taux de remplacement sont en moyenne plus élevés dans les services gérés par des régies qu’en affermage. Ceci peut s’expliquer par le fait que les services en régie sont majoritairement présents dans les services de petites tailles. Par conséquent, des taux de remplacement élevés sont souvent associés à des réseaux de petite taille (faible kilométrage de canalisations). De plus, dans les petits services ruraux, les travaux de remplacement sont souvent réalisés en parallèle d’autres travaux. Néanmoins nous observons également dans les services de grande taille des taux de remplacement plus élevés dans les services en régie que dans les services en affermage. Ceci peut s’expliquer par une différence d’objectif défini par les services en régie et les services en affermage : les services en affermage ne sont pas responsables du renouvellement des canalisations à moins que ceci soit spécifié dans leurs contrats. De plus, nos résultats montrent que même s’il existe un effet négatif de la taille des services sur les taux de remplacement, dans les très grandes villes, les taux de remplacement sont plus élevés. Ceci est cohérent avec les résultats théoriques obtenus dans les deux premiers chapitres. / This dissertation focuses on the issue of water infrastructure renewal in potable water distribution networks. I investigate the reasons why water infrastructure in certain water utilities are not renewed. This dissertation is divided into three chapters. The first chapter is based on theoretical models that solve for the optimal water main network quality index. The second chapter studies the optimal timing of water mains replacement. And finally, the third chapter is based on an empirical study on the factors that influence the water main replacement rates in French utilities.In the first chapter I present a static cost minimisation model to solve for the cost-efficient water main quality index. This quality index is defined as the proportion of ``new" mains (which we denote as ''good quality mains'') to the total length of mains. The solution depends on the arbitrage between the cost of water loss and the cost of good quality mains. Where economies of network density are present such as urban utilities, water loss represents a cost burden to the water utility; hence water loss reduction (high network quality) is beneficial. Furthermore, we show that rural utilities face the largest difficulty in achieving both water loss reduction and cost recovery of network renewal.In the second chapter I present a two-stage optimal switching timing model that solves for the profit-maximising timing of water mains replacement. This model considers the option between rehabilitation and replacement. Water utilities may be inclined to rehabilitate old mains to extend their longevity since rehabilitation costs are much lower than replacement costs. We show that it is beneficial for the utilities to replace mains that are already obsolete than to rehabilitate since the generated benefit from temporary water loss reduction and the postponement of replacement is not worth the cost of rehabilitation. This is particularly noticeable in large urban utilities that face large costs of water loss.In the third chapter, I present an empirical study on the water mains replacement rates observed in French water utilities. The empirical results based on cross sectional data show that publicly operated utilities on average have higher replacement rates than outsourced utilities. This is because most of the public utilities have short total network length (very high replacement rates are associated with small network length). Moreover, small rural networks tend to conduct replacement of mains alongside other roadworks. However results also show that public utilities have higher replacement rates over outsourced ones in very large urban utilities. This result reflects the difference of priorities defined by in-house operated utilities and outsourced utilities. This difference does not imply that outsource utilities neglect network renewal; instead it reveals the nature of the structure of outsourced utilities. The responsibility of outsourced utilities are defined in the contract signed with the local authority. If network renewal is not specified, there is no incentive for replacing mains. Moreover, in practice, outsourced utilities often manifest higher prices which are accompanied by higher water quality. Furthermore, the results show that the size of the network has a large impact on replacement rates. The longer the length, the proportion of replaced mains are smaller; however, for very large utilities the negative effect disappears. The results show that replacement rates are indeed greater in very large urban utilities. This result is coherent with the theoretical models presented in the first chapter that shows the urgent need for high network quality in large urban utilities.

A model for the prediction of color release from a pilot distribution system was created in 2003 by Imran. This model allows prediction of the release of color from aged cast iron and galvanized steel pipes as a function of water quality and hydraulic residence time. Color was used as a surrogate measurement for iron, which exhibited a strong linear correlation. An anomaly of this model was an absence of a term to account for pH, due to the influent water being well stabilized. A new study was completed to evaluate the effectiveness of corrosion inhibitors against traditional adjustment. Two control lines were supplied with nearly same water qualities, one at pH close to pHs and one at pH well above pHs. The resulting data showed that effluent iron values were typically greater in the line with lower pH. The non-linear color model by Imran shows good agreement when the LSI was largely positive, but underpredicted the color release from the lower LSI line. A modification to the Larson Ratio proposed by Imran was able to give a reasonable agreement to the data at lower LSI values. LSI showed no definite relation to iron release, although a visual trend of higher LSI mitigating iron release can be seen. An iron flux model was also developed on the same pilot system by Mutoti. This model was based on a steady state mass balance of iron in a pipe. The constants for the model were empirically derived from experiments at different hydraulic conditions with a constant water quality. Experiments were assumed to reach steady state at 3 pipe volumes due to the near constant effluent turbidity achieved at this point. The model proposes that the iron flux under laminar flow conditions is constant, while the iron flux is linearly related to the Reynolds Number under turbulent conditions. This model incorporates the color release models developed by Imran to calculate flux values from different water qualities. A limited number of experiments were performed in the current study using desalinated and ground water sources at Reynolds Numbers ranging from 50 to 200. The results of these limited experiments showed that the iron flux for cast iron pipe was approximately one-half of the predicted values from Mutoti. This discrepancy may be caused by the more extensive flushing of the pipes performed on the current experiments which allowed attainment of a true steady state. Model changes were proposed to distinguish between near stagnant flow and the upper laminar region, with the upper laminar region showing a slight linear increase. Predictions using the galvanized flux model were not accurate due to an inferior color release model that was developed for galvanized pipes. The model exhibits a high dependence on sulfate concentrations, but concentrations of sulfates in the current experiments were low. This led to low predicted flux values when the actual data showed otherwise. A new galvanized model was developed from a combination of data from the original and current experiments. The predicted flux values using the new model showed great improvement over the old model, but the new model database was limited and the resulting model was not able to be independently tested.

Gambia is the smallest country on the African mainland, surrounded by Senegal on all it's borders except the coastal one. Gambia faces a pressing issue with water supply shortages, along with more than one third of the world’s population. The aim of this study is to propose a system that will solve water supply shortage through a local water supply system. The method mainly consisted of a literature review, aimed to provide an overview of the subject as well as to highlight existing gaps within today’s research about rainwater harvesting systems. Furthermore, a case study was used to determine the best way to design the rainwater harvesting system. The results of the study are showcased through a tank and pipe system, where water is collected on the roof of the residential homes and stored in a polyethylene tank on the ground. The results from the survey, asking questions related to the inhabitants’ water usage habits, were analyzed and represented through a table. In Brikama rainwater can be used for laundry, cooking and watering plants. The positive effects it brings include, but are not limited to, reduction of soil erosion, restoring the ground water cycle, as well as making people become more self-sufficient. In this study, a system for Brikama can be optimized by using Solvatten technology in combination with conventional rainwater harvesting methods. The tank volume suggested by Mun and Han (2011) is a feasible premiss, however it can not be directly applied to Gambian rainwater conditions as there are differing presumptions between the reference country Korea, and Gambia. Additionally, the validity of the study is affected as the reference studies suggest using computer simulations, as well as computer models as a basis for the operational and input data. / Gambia är det minsta landet på det afrikanska fastlandet, omgivet av Senegal på alla dess gränser utom den kustnära. Gambia står inför ett akut problem med vattenbrist, tillsammans med mer än en tredjedel av världens befolkning. Syftet med denna studie är att föreslå ett system som löser problematiken med vattenförsörjning genom ett lokalt vattenförsörjningssystem. Metoden bestod huvudsakligen av en litteraturöversikt, som syftade till att ge en överblick över ämnet samt att lyfta fram befintliga luckor inom dagens forskning om system för uppsamling av regnvatten. Dessutom användes en fallstudie för att bestämma det bästa sättet att designa systemet för uppsamling av regnvatten. Resultatet av studien visas genom ett tank- och rörsystem, där vatten samlas upp på taket av bostadshusen och lagras i en polyetentank på marken. Resultatet från undersökningen, med frågor relaterade till invånarnas vattenanvändningsvanor, analyserades och representerades genom en tabell. I Brikama kan regnvatten användas för tvätt, matlagning och vattning av växter. De positiva effekter det medför inkluderar, men är inte begränsade till, minskning av jorderosion, återställande av grundvattnets kretslopp, samt att få människor att bli mer självförsörjande. I denna studie kan ett system för Brikama optimeras genom att använda Solvatten-teknik i kombination med konventionella metoder för uppsamling av regnvatten. Tankvolymen som föreslagits av Mun och Han (2011) är en genomförbar premiss, men den kan inte tillämpas direkt på gambiska regnvattenförhållanden eftersom det finns olika antaganden mellan referenslandet Korea och Gambia. Dessutom påverkas studiens validitet eftersom referensstudierna föreslår att man använder datorsimuleringar, samt datormodeller som underlag för drift- och indata.

El asunto de la escasez de agua bebible es un asunto que en nuestros tiempos cobra cada vez mayor importancia, ya que cada vez somos más personas en el globo y hay menos agua potable disponible, consecuente a ello son frecuentes las investigaciones y los avances tecnológicos que se dan para resolver este problema, y entre estos avances se encuentra la desalinización solar, que se presenta como una alternativa muy prometedora para los lugares sin muchos medios económicos y alejados de las ciudades o de un suministro local. El presente trabajo tiene por finalidad diseñar un desalinizador solar que sea apto para suplir las necesidades de agua potable de las familias presentes en la caleta de Chérrepe, provincia de Chepén, departamento de La libertad, para lo cual se determinarán las necesidades hídricas de la población, se ejecutará un análisis del potencial solar térmico del lugar, después se procederá a diseñar y validar el sistema de desalinización solar y finalmente se realizara un análisis de costos. / The issue of the shortage of drinking water is an issue that in our times is becoming increasingly important, since there are more and more people on the globe and there is less drinking water available, consequently, research and technological advances are frequent. They are given to solve this problem, and among these advances is solar desalination, which is presented as a very promising alternative for places without many economic means and far from cities or a local supply. The purpose of this work is to design a solar desalinator that is suitable to meet the drinking water needs of the families present in the cove of Chérrepe, province of Chepén, department of La Libertad, for which the water needs of the population will be determined. , an analysis of the solar thermal potential of the place will be carried out, then the solar desalination system will be designed and validated and finally a cost analysis will be carried out.

This diploma thesis deals with rainwater harvesting system in the company premises and the design of plumbing system in the newly built training center and storage hall. The new standard EN 16941-1 is described in the teoretical part. This standard deals with the use of rainwater. The experimental part solves the measurement of the non-potable water in this area. In the practical part, the acquired information is applied to the newly built object in the company premises. A project is created in the form of a technical report and drawing documentation for the use of rainwater and plumbing system.

The birth of a non-racial democracy in South Africa brought many challenges such as the supply of potable water to all societies irrespective of their colour or even location. Migration of people from rural to urban has increased the demand of potable water supply in many areas that were previously neglected by the former Apartheid regime. The increase of the human population in urban or developing areas of South Africa will therefore imply that various public services such as potable water supply, proper housing, electricity supply, schooling and basic health facilities should be provided in an efficient, effective and economic manner. As the resident of Khuma Township, the researcher has a keen interest in the management of potable water supply in this area, inter alia, the nature and extent of the physical environment and the efficiency and effectiveness of a potable water supply as a means of improving service delivery by the Matlosana Local Municipality to Khuma Township. The area has the history of gold mining and the majority of the people from other rural areas and neighbouring states moved into this area and were later joined by their families. This resulted in an increase in the population to a point where people were placed in dangerous areas such as underlying dolomite and along the Koekemoer spruit. For example, extension 6 is known to experience sinkholes due to underground mining activities and the underline dolomite rock. The population has increased in Khuma Township to such an extent that a shortage of potable water supply is been experienced. Khuma Township had one water reservoir for the past 40 years and Matlosana Local Municipality did not improve or developed infrastructure related to potable water supply to be able to cater for the increasing population of this area. An empirical study was conducted in among the residents of Khuma Township, Matlosana Local Municipality and role-players in the management of potable water supply. From this study, it was evident that the supply of potable water in Khuma Township is insufficient, and there was poor communication, cooperation and participation between Matlosana Local Municipality and the residents of Khuma Township. The ineffective management of potable water supply in Khuma Township by the Matlosana Local Municipality as well as ignoring the significance of settling people in a safe area that is free from water pollution, sinkholes and underlying dolomite rock left a lot to be desired. The researcher arrived at logical conclusions and recommendations with regard to all aspects related to future management of potable water supply in Khuma Township. / M Development and Management, North-West University, Potchefstroom Campus, 2014

O presente trabalho teve como objetivo estudar a influência do gradiente médio de velocidade (Gzc), associado ao tempo de detenção hidráulico (tzc) e à taxa de aplicação superficial (TASzc), na zona de contato, na eficiência de clarificação de uma unidade retangular de flotação por ar dissolvido, em escala piloto, tratando água para abastecimento. Foram estudadas duas configurações da Unidade Piloto de Flotação por Ar Dissolvido (UPFAD) (A e B), as quais diferem no comprimento da zona de contato A (90 mm) e B (140 mm). A TASzc - A (133 ± 3 m/h) e B (86 ± 1 m/h) - e o tzc - A (54 ± 1s) e B (84 ± 1 s) - são diferentes. Foram avaliados três valores do Gzc A (1,8; 6,5;10,2) e B (0,9; 4,7; 6,3), através da inserção de telas com características diferentes no interior da zona de contato. E, Para cada valor de Gzc, foram investigados três valores de A/V (3,73; 4,90; 6,41). Em todos os ensaios realizados, foram fixados os seguintes parâmetros: vazão da água bruta preparada (5,4 m³/h); temperatura da água bruta preparada (26 ± 1ºC); pH de coagulação (6,5 ± 0,1); tempo de floculação (17,2 min); gradiente médio de velocidade de floculação (110 s-1); vazão de descarte após a floculação (0,8 m³/h); vazão de entrada para a flotação (Qe) (4,6 m³/h); velocidade de entrada para a flotação (ve) (180 m/h); velocidade cross-flow (45 m/h); TASzs (14,6 ± 0,2 m/h); pressão de saturação (4,5 ± 0,1 Kgf/cm²). A unidade piloto FAD foi alimentada com água preparada, que apresentou turbidez em torno de 7,4 ± 0,6 UNT, e cor aparente, em torno de 39,4 ± 4,3 UH. A fração removida dos parâmetros analisados para cada Gzc é menos sensível a variações de A/V na configuração A que na configuração B. Na configuração A, a tela que apresentou Gzc em torno de 6,5 s-1 gerou melhores resultados para cada A/V analisado. Na configuração B, a tela que gerou Gzc em torno de 4,7 s-1 proporcionou melhor fração removida de turbidez e cor para cada A/V estudado. Além disso, na configuração B, a fração removida de turbidez e cor foi menos sensível a variações de A/V, para Gzc de 4,7 s-1 que para os demais valores de Gzc. A tela que gerou resultados mais eficientes na configuração A foi a mesma para a configuração B. Portanto o uso da referida tela favoreceu o desempenho das configurações A e B. Comparando todas as situações estudadas nas duas configurações, o ensaio com a configuração A (com tzc de 54 s) com Gzc de 6,3 s-1 e A/V de 4,9 g/m³, apresentou as maiores frações de remoção de cor e turbidez. / The present work aimed to study the influence of velocity gradient (Gzc) associated with the hydraulic detention time (tzc) and the rate of surface application (TASzc) in the contact zone in the efficiency of clarification of a unit rectangular dissolved air flotation pilot scale, treating water supplies. Two different kinds of configurations of the reactor dissolved air flotation in pilot scale (UPFA) (A and B) were studied, which differ in the length of the contact zone - A (90 mm) and B (140 mm). The TASzc - A (133 ± 3 m/h) and B (86 ± 1 m/h) - and tzc - A (54 ± 1 s) and B (84 ± 1 s) were different. Three different values of Gzc were analysed - A (1.8, 6.5, 10.2 s-1) and B (0.9, 4.7, 6.3 s-1) by insertion of grilles with different characteristics within the zone contact. And for each value of Gzc, three values of A/V (3.73, 4.90, 6.41 g/m³) were investigated. In all trials, the following parameters were set: flow of synthetic raw water (5.4 m³/h), synthetic raw water temperature (26 ± 1ºC), coagulation pH (6.5 ± 0.1); flocculation time (17.2 minutes), the speed gradient flocculation (110 s-1); flow disposal after flocculation (0.8 m³/h), input flow to the flotation (Qe) (4, 6 m³/h), input speed for flotation (ve) (180 m/h), cross-flow velocity (45 m/h), TASzs (14.6 ± 0.2 m/h), saturation pressure (4.5 ± 0.1 kgf/cm ²). The pilot plant was fed with synthetic water, which showed turbidity of approximately 7.4 ± 0.6 NTU, and apparent color, about 39.4 ± 4.3 HU. The removal efficiency of the analyzed parameters for each Gzc is less sensitive to variations in the A/V in the configuration A than in the configuration B. In configuration A, the grille that showed Gzc about 6.5 s-1 gave better results for each A/V analysis. In configuration B, the grille that has generated Gzc around 4.7 s-1 provided the best removal efficiency of turbidity and color for each A/V studied. Furthermore, in the configuration B, the removal efficiency of color and turbidity was less sensitive to variations in A/V for Gzc 4.7 s-1 than for other values of Gzc. The grille that generated the best results in the configuration A was the same for the configuration B. Therefore the use of that grille favored the performance of configurations A and B. Comparing all the situations studied in two configurations, the test with the configuration A (with tzc the 54 s) with Gzc of 6.3 s-1 and A/V of 4.9 g/m³, had the highest removal efficiencies of color and turbidity.

O desempenho de unidades de flotação por ar dissolvido (FAD) depende significativamente do projeto da zona de contato (ZC) dessas unidades, situada na entrada das mesmas e responsável por promover condições adequadas para que ocorram taxas satisfatórias de colisão entre as microbolhas de ar e os flocos formados na etapa antecedente de floculação da água para abastecimento. Os dois principais parâmetros de projeto da ZC são o tempo de detenção hidráulico ou tempo de contato (Tzc) e o gradiente médio de velocidade na ZC (Gzc). A presente dissertação apresenta os resultados de estudo sobre a influência do Tzc e do Gzc na ZC de uma unidade piloto de flotação por ar dissolvido (UPFAD) com escoamento contínuo aplicada ao tratamento de água para abastecimento. Foram utilizados módulos contendo tela metálica em seu interior com malha de #25 mm com diferentes dimensões, de modo a se obterem diferentes valores de Gzc e Tzc. Foram investigadas duas configurações na unidade de FAD (Configurações A e B), nas quais o comprimento (Lzc) e a altura (Hzc) da ZC foram variados, permitindo a alteração do Tzc e mantendo-se controlados os valores de Gzc (com a introdução ou não de diferentes módulos de tela metálica na ZC) e vice versa. Os demais parâmetros do processo de FAD não sofreram variações, tais como taxa de aplicação superficial (TAS) na zona de separação, tempo de floculação, entre outros. Para a configuração A, foram estudadas três alturas diferentes na ZC e para a configuração B, quatro alturas diferentes na ZC, o que acarretou, para cada valor de Gzc variação do Tzc. Para cada configuração da ZC, também foram testados três valores de vazão de recirculação de água saturada com ar de modo a se obterem três diferentes concentrações de ar (A/V) no processo de flotação. Para todos os parâmetros analisados (Turbidez, Cor, Absorbância), as maiores eficiências de remoção foram obtidas nos ensaios realizados com o uso da tela #25 mm tanto na configuração A (TASzc = 136 m/h e G = 6,1 s-1) quanto na configuração B (TASzc = 87 m/h e G = 3,2 s-1). Os resultados permitem concluir que o par de valores (Tzc, Gzc) é mais apropriado para o projeto da zona de contato de unidades FAD do que o par (Tzc, TASzc) usualmente adotado pelos projetistas, sendo que, na faixa de valores investigados a UPFAD apresentou melhor desempenho para o par: Tzc de 41 s e Gzc de 6,1 s-1. / The performance of units dissolved air flotation (DAF) depend significantly of design on the contact zone (CZ) of these units, situated at the entrance thereof and responsible for promoting appropriate conditions to occur satisfactory collision rates between air microbubbles and the flocs formed in the step of flocculation of potable water. The two main design parameters of the CZ are the hydraulic detention time or contact time (Tcz) and the velocity gradient in the CZ (Gcz). This work presents the results of study of the effects of varying the Tcz and Gcz at the contact zone of pilot unit DAF with continuous flow applied to the treatment of potable water. Were used modules containing metal grille with mesh of #25 mm, with different dimensions in order to obtain different values of Gcz and Tcz. Were investigated two configurations in the unit FAD ( configurations A and B) where the length (Lcz) and height (Hcz) of contact zone were varied, allowing the variation of Tzc and keeping the values of Gcz controlled (with the introduction or not of different modules in the metal grille in CZ) and vice versa, without changes in other process variables FAD, such as rate of surface application (TAS) in the separation zone, flocculation time, among others. For the configuration A were studied three different heights in the CZ and in configuration B, four different heights in the CZ, which resulted, for each value of Gcz (relative to the chosen value of Lcz) the variation of Tzc. For each configuration of CZ were also tested three values of recirculation flow of air saturated in order to obtain three different values of concentration in air (A/V) in the flotation process. For all parameters analyzed (turbidity, color, absorbance), the highest efficiencies were obtained in assays performed using the grille #25 mm, both in configuration A (TAScz = 136 m/h and L = 6,1 s-1) and configuration B (TAScz = 87 m/h and G = 3,2 s-1). The results indicate that the pair of values (Tcz, Gcz) is more suitable for project of the CZ of units FAD than the pair (Tcz, TAScz) usually adopted by the designers, and values in the range investigated in UPFAD showed performed better for Tcz of 41 s and Gcz of 6,1 s-1.