No description available.

Thesis (doctoral)--Philipps-Universität Marburg, 2007. / Title from home page (viewed Mar. 31, 2008); available via World Wide Web; requires . Includes bibliographical references.

Thesis (Ph. D.)--United States International University, 1989. / Includes bibliographical references (leaves 153-157).

Thesis (M.S.)--State University of New York at Binghamton, Thomas J. Watson School of Engineering and Applied Science, Department of Systems Science and Industrial Engineering, 2007. / Includes bibliographical references.

The objective of this research is to determine and develop a model that is capable of accurately measuring customer satisfaction for different industries and in particularly for the Printed Wiring Boards (PWB) Manufacturers. The new model will incorporate data not being collected or utilized by the survey method of determining customer satisfaction. The method used is a weighted average of satisfaction among several researched categories with percentages that accurately represent the relative importance of multiple facets of the PWB manufacturers customer satisfaction. A very common term in quality assurance is that "What is not measured accurately can not be evaluated or managed correctly," thus customer satisfaction is a very important aspect of any business, industry, or government. A satisfied customer will do more business and recommend it to other potential customers. Thus the business will grow and more revenues result. On the other hand, an unsatisfied customer will abandon the business and encourage more customers not to get involved with the same business so the business may decline and lose its market share and profitability. The categories that contribute to PWB customer satisfaction will be determined by conducting surveys among the leaders and best in the business of the PWB industry in addition to discovery of related articles that define the categories of the customer satisfaction for the PWB manufacturers. Once the categories are determined, the research concentrates on the weighting of the categories that most contribute to the PWB customer's satisfaction and a measure of satisfaction is derived. The model is easily applied to any other kind of PWB business or service industry. The model is based on empirical methods that will give an accurate measurement for the PWB customer's satisfaction. This in turn allows organizations the opportunity for improving customer satisfaction and increasing market share. The algorithm is based on characteristics deemed important by customers. Thus the customer satisfaction index can be computed and monitored on a regular basis without costly surveys. The major difference between this new model and the standard methods of determining customer satisfaction using the surveys is that this model will utilize data available with the proposals, sales, shipping, receiving, quality, engineering, manufacturing, and purchasing departments. The developed method to measure customer satisfaction utilizing internal data can be more cost effective, more accurate, can provide individual customer satisfaction scores, can measure whether or not these individual scores are statistically lower than the majority, and can provide satisfaction measures in real time none of which can be supplied by the survey method.

Electrochemiluminescence (ECL) is a phenomenon whereby electrochemical reactions generate a product that is capable of emitting light. ECL’s high sensitivity, selectivity, extremely low background, and relatively simple instrumentation make it particularly well-suited for chemical sensing and biosensing strategies. Here we report a simple ECL imaging system based on a camera interfaced with a zoom lens to compare pencil graphite electrode (PGE) and screen-printed carbon electrode (SPCE) arrays as ECL platforms. With this system, ECL signals generated from tris(2,2′- bipyridine)ruthenium(II) chloride hexahydrate ([Ru(bpy)3]2+) using co-reactant tri-n-propylamine (TPA) were linear with respect to [Ru(bpy)3]2+ concentrations from 9 to 450 μM. Detection limits for [Ru(bpy)3]2+ were found to be 1.8 μM with PGEs and 0.9 μM with SPCEs. Immobilization of a thin polyvinylpyridine (PVP) film ECL reporter [Ru(bpy)2(PVP)10]2+ on SPCEs was also investigated. Overall, the combination of PGEs or SPCEs with the simple ECL imaging system offers a cost-effective approach to ECL-based sensing and biosensing.

No description available.

This thesis explores the application of two-dimensional (2D) materials such as graphene and single layer hexagonal boron nitride (h-BN) which are produced by liquid phase exfoliation for use in printed electronics and energy composite applications. In Chapter 2 I give a broad overview of the electrical, mechanical and optical properties of 2D materials among other nanomaterials that were used in the thesis such as carbon nanotubes and conductive polymers. Additionally I review the techniques and theory behind the exfoliation and dispersion of functional layered materials. In Chapter 3 I present the coating and printing techniques which were used in this thesis along with the experimental techniques and methods which I use to characterise my inks, films and devices. Chapter 4 is the first experimental chapter of the thesis and demonstrates the printing of 2D material heterostructures to create fully printed dieletrically gated field effect transistors with 2D materials on textile and polymer substrates. In this chapter I also demonstrate reprogrammable volatile memory, p and n type inverters, complementary inverters, and logic gates which pave the way to fully printed integrated circuits, operational at room temperature and pressure with 2D materials processed in liquid. In Chapter 5, I review spray coating (a highly industrial scalable printing technique), in terms of the optimisation of its parameters to achieve thin films of nanomaterials on three-dimensional (3D) surfaces. I then demonstrate that it is possible to create large area (∼750 cm2) transparent conducting films around curved surfaces with spray coating enabling a semi-transparent (around 360°) spherical touch sensor for interactive devices. Chapter 6 explores printed photonics for applications in terahertz (THz) frequencies. Here I demonstrate the feasibility of liquid phase exfoliated graphene to create THz saturable absorbers (SAs) which could enable many applications in THz frequencies such as tomography or time-resolved spectroscopy that require mode-locked (i.e. enabling a train of short pulses to be derived from continuous-wave operation) THz pulses. I also demonstrate that these SAs can be inkjet printed on demand providing unprecedented compactness in a quantum cascade laser system. Finally in Chapter 7, I look at the application of graphene in microbial fuel cells (MFC). I demonstrate that enhanced MFC output arises from the interplay of the improved surface area, enhanced conductivity, and catalytic surface groups of a graphene based electrode. As a final step graphene based anodes and cathodes which were entirely platinum free were combined to create an environmentally sustainable energy source.

No description available.

Yes / Vat photopolymerization has garnered interest from pharmaceutical researchers for the fabrication of personalised medicines, especially for drugs that require high precision dosing or are heat labile. However, the 3D printed structures created thus far have been insoluble, limiting printable dosage forms to sustained-release systems or drug-eluting medical devices which do not require dissolution of the printed matrix. Resins that produce water-soluble structures will enable more versatile drug release profiles and expand potential applications. To achieve this, instead of employing cross-linking chemistry to fabricate matrices, supramolecular chemistry may be used to impart dynamic interaction between polymer chains. In this study, water-soluble drug-loaded printlets (3D printed tablets) are fabricated via digital light processing (DLP) 3DP for the first time. Six formulations with varying ratios of an electrolyte acrylate …