No description available.

The aims of this thesis are to evaluate the present status of scholarship on Abū Tālib al-Makkī (d. 386/996) and to expand the basis of further research on him by analysing him in a multi-dimensional way. This study challenges the conventional view that al-Makkī’s Qūt al-qulūb (‘The Nourishment of Hearts’) is a Sufi work. Part 1 introduces modern scholarship on al-Makkī. It also demonstrates several issues which are tackled in this thesis. The present study focuses on a metaphorical image of the heart, which is also shared in various cultures. By looking at this common idea, Part 2 first attempts to explore the nature of the Qūt within the context of Sufism and religion in general. This part provides a summarised translation of part of the Qūt, where the author elucidates his view of the heart. The intention of this annotated translation is to provide easy access to the key thought of al-Makkī in the Qūt, for the first time in English, on the basis of a critical edition of this book. Lastly Part 2 discusses the authenticity of al-Makkī’s alleged work, Ilm al-qulūb (‘The Knowledge of Hearts’). Part 3 analyses the influence of al-Makkī within and beyond Islam. Considering the limited area of the study of al-Makkī , this part first examines numerous works in various fields from his time until the twelfth/eighteenth century. This is to evaluate how he was perceived in Muslim scholarship and to explore areas which have not been discussed thoroughly before. Finally this thesis looks at the Andalusian Jewish scholar, Ibn Bāqūdā(d. some time after 472/1080) and his book al-Hidāya ilā farā'id al-qulūb (‘The Right Guidance to the Religious Duties of Hearts’). A possible link between the two authors has been sometimes pointed out; however, it has not been studied exhaustively. Through exploring various aspects of al-Makkī and his writing, the present thesis attempts to open up the study of the Qūt beyond Sufism and to offer an opportunity to give further thought on the essential features of the mystical dimensions of Islam.

No description available.

Queensland University of Technology has radically restructured the top-level governance systems for information technology planning and management. Additionally, QUT has integrated information technology planning and management with physical infrastructure planning and management via the Asset Management Plan. To complete the approach, QUT has instigated a top-level governance committee for IT to ensure alignment with organisational goals and strategies. This is an unusual development for IT planning and management at an Australian university and attracted attention from the Commonwealth Department of Education, Science and Training (DEST) as well as other universities in the Australian tertiary education sector and led to the research study. This research studies the redevelopment of the information technology planning and management approach. The survey research determines the level of integration of IT and university planning, and the correlation of this integration to effectiveness of IT planning. The case study documents the changes, highlights the advantages and disadvantages of the new approach and provides a model for change in IT management at other Australian universities. It is evident from current literature on information technology management and strategic planning that these developments are validated as steps toward achieving best practice in information technology planning and management. Through rigorous conduct of interviews, observations and review of documentation and through application of a survey questionnaire to a defined population, the research reviews the developments and ongoing implementation of the planning and management infrastructure. Among the outcomes from the new approach are better alignment of information technology investment with QUT goals and objectives, better benefits realisation from information technology investment, better project management of information technology development and innovation, and increased flexibility and accountability in information technology expenditure. Finally, a comparison to other information technology planning and management methods in place at Australian universities demonstrates the uniqueness of the QUT approach. The thesis reports the benefits and difficulties associated with this approach, and provides a context for future development of IT planning, management and governance at QUT.

Research and Development engineering is at the corner stone of humanity’s evolution. It is perceived to be a systematic creative process which ultimately improves the living standard of a society through the creation of new applications and products. The commercial paradigm that governs project selection, resource allocation and market penetration prevails when the focus shifts from pure research to applied research. Furthermore, the road to success through commercialisation is difficult for most inventors, especially in a vast and isolated country such as Australia which is located a long way from wealthy and developed economies. While market leading products are considered unique, the actual process to achieve these products is essentially the same; progressing from an idea, through development to an outcome (if successful). Unfortunately, statistics indicate that only 3% of ‘ideas’ are significantly successful, 4% are moderately successful, and the remainder ‘evaporate’ in that form (Michael Quinn, Chairman, Innovation Capital Associates Pty Ltd). This study demonstrates and analyses two techniques developed by the author which reduce uncertainty in the engineering design and development phase of new product development and therefore increase the probability of a successful outcome. This study expands the existing knowledge of the engineering design and development stage in the new product development process and is couched in the identification of practical methods, which have been successfully used to develop new products by Australian Small Medium Enterprise (SME) Excel Technology Group Pty Ltd (ETG). Process theory is the term most commonly used to describe scientific study that identifies occurrences that result from a specified input state to an output state, thus detailing the process used to achieve an outcome. The thesis identifies relevant material and analyses recognised and established engineering processes utilised in developing new products. The literature identified that case studies are a particularly useful method for supporting problem-solving processes in settings where there are no clear answers or where problems are unstructured, as in New Product Development (NPD). This study describes, defines, and demonstrates the process of new product development within the context of historical product development and a ‘live’ case study associated with an Australian Government START grant awarded to Excel Technology Group in 2004 to assist in the development of an image-based vehicle detection product. This study proposes two techniques which reduce uncertainty and thereby improve the probability of a successful outcome. The first technique provides a predicted project development path or forward engineering plan which transforms the initial ‘fuzzy idea’ into a potential and achievable outcome. This process qualifies the ‘fuzzy idea’ as a potential, rationale or tangible outcome which is within the capability of the organisation. Additionally, this process proposes that a tangible or rationale idea can be deconstructed in reverse engineering process in order to create a forward engineering development plan. A detailed structured forward engineering plan reduces the uncertainty associated with new product development unknowns and therefore contributes to a successful outcome. This is described as the RETRO technique. The study recognises however that this claim requires qualification and proposes a second technique. The second technique proposes that a two dimensional spatial representation which has productivity and consumed resources as its axes, provides an effective means to qualify progress and expediently identify variation from the predicted plan. This spatial representation technique allows a quick response which in itself has a prediction attribute associated with directing the project back onto its predicted path. This process involves a coterminous comparison between the predicted development path and the evolving actual project development path. A consequence of this process is verification of progress or the application of informed, timely and quantified corrective action. This process also identifies the degree of success achieved in the engineering design and development phase of new product development where success is defined as achieving a predicted outcome. This spatial representation technique is referred to as NPD Mapping. The study demonstrates that these are useful techniques which aid SMEs in achieving successful new product outcomes because the technique are easily administered, measure and represent relevant development process related elements and functions, and enable expedient quantified responsive action when the evolving path varies from the predicted path. These techniques go beyond time line representations as represented in GANTT charts and PERT analysis, and represent the base variables of consumed resource and productivity/technical achievement in a manner that facilitates higher level interpretation of time, effort, degree of difficulty, and product complexity in order to facilitate informed decision making. This study presents, describes, analyses and demonstrates an SME focused engineering development technique, developed by the author, that produces a successful new product outcome which begins with a ‘fuzzy idea’ in the mind of the inventor and concludes with a successful new product outcome that is delivered on time and within budget. Further research on a wider range of SME organisations undertaking new product development is recommended.