Neste trabalho foi desenvolvida uma metodologia para análise qualitativa e quantitativa de compostos de borracha destinados à fabricação de revestimentos de embreagem. Estes compostos são formados por um grande número de componentes, dentre os quais utilizam, além da base elastomérica, uma resina como agente de processo, agentes de vulcanização e diversas cargas, cada qual com uma função específica. Os sistemas elastoméricos são caracterizados por propriedades que podem ser afetadas pela adição ou remoção de algum ingrediente e também pelas variações em suas concentrações. Os compostos de borracha são confeccionados por uma empresa terceira; portanto, o desenvolvimento de uma variedade de ferramentas analíticas para monitoramento desses sistemas se torna essencial, uma vez que esses compostos são a base da formulação de um revestimento de embreagem. Para o desenvolvimento desta metodologia foram utilizadas as técnicas TG/DTG, FTIR, GC e EDXRF. Como primeira etapa do trabalho foi realizado um estudo exploratório e um estudo de pré-formulação para a caracterização qualitativa de cada matéria-prima no composto de borracha. Na segunda etapa do trabalho foram preparadas diversas amostras com concentrações conhecidas do componente a ser quantificado. Para a quantificação das cargas grafite e negro de fumo utilizou-se diretamente a técnica de TG/DTG. Para a quantificação dos demais componentes foram elaboradas curvas analíticas de resposta (FTIR, GC e EDXRF) vs. variação da concentração. Observou-se a existência de uma correlação forte/perfeita e positiva entre as variáveis e as equações obtidas apresentaram boa adequação ao modelo de regressão linear. As curvas analíticas possibilitaram determinar as concentrações dos componentes de teores desconhecidos. / In this work it was developed a methodology for qualifying and quantifying rubber compounds destined for facings manufacture. These compounds are formed by a large number of components which use, beyond the elastomeric base, a resin that is used as a process agent, vulcanization agents and different fillers, each one with a specific function. The elastomeric systems are characterized by properties that could be affected by the addition or removal of some ingredient and also by variations in its concentration. The rubber compounds are produced by an outsourced company, so the development of a variety of analytical tools for monitoring these systems is essential, since these compounds are the basis of a facing formulation. For developing this methodology, TG/DTG, FTIR, GC and EDXRF were used as techniques. The first step was an exploratory and a pre-formulation study for a qualitative characterization of each raw material in rubber compound. In the second stage, several samples with known concentrations of the quantifying component were prepared. The quantification of graphite and carbon black was made directly by means of TG/DTG technique. For quantifying the other components, analytical curves of response (FTIR, GC and EDXRF) vs. variation of concentration were elaborated. A strong/perfect and positive correlation between the variables was observed and the equations presented good fit with the linear regression model. By means of the analytical curves it was possible to determine the amounts of unknown concentration rubber compounds.

O projeto enfocou a aplicação da difração de raios-X (DRX) na caracterização e quantificação dos compostos cristalinos do clínquer de cimento Portland, através do método de Rietveld, constituindo-se em contribuição pioneira sobre o tema em âmbito nacional. Foram utilizadas 40 amostras de clínquer provenientes de cinco diferentes unidades fabris, visando ampla representatividade do material de estudo. O clínquer de cimento Portland é o material sinterizado e peletizado, resultante da calcinação de uma mistura adequada de calcário e argila e, eventualmente, de componentes corretivos. Os compostos metaestáveis do clínquer Portland podem ser subdivididos em três grupos distintos: os silicatos cálcicos (C3S e C2S), a fase intersticial (C4AF, C3A, C12A7), e o grupo dos componentes menos freqüentes como o periclásio, a cal livre e os sulfatos. As proporções destes compostos são parâmetros importantes no controle de processo industrial de clinquerização. O método de Rietveld tem por base a simulação de todo o perfil difratométrico a partir de parâmetros estruturais das fases constituintes, permitindo refinar parâmetros de natureza instrumental e cristalográfica. A comparação do difratograma calculado com o observado e redução das diferenças através do método de mínimos quadrados permitem a obtenção de resultados quantitativos. DRX-Rietveld apresentou-se como uma técnica de quantificação de elevada reprodutibilidade com vantagens de cunho técnico e logístico com relação aos dois métodos correntemente utilizados no Brasil (microscopia e cálculo potencial de Bogue). Técnicas analíticas adicionais permitiram comparar resultados quantitativos obtidos por DRX-Rietveld e também correlacionar características dos compostos com o seu perfil difratométrico. A microscopia óptica foi a técnica de maior importância para comparações tanto qualitativas como quantitativas. A microscopia eletrônica (MEV-EDS) permitiu a aferição de fases não identificadas por microscopia óptica, como o C12A7 e sulfatos. A técnica de dissolução seletiva, aplicada para a concentração da fase intersticial, deu suporte para a aferição quantitativa de teores de polimorfos do C3A. A técnica mostrou resultados coerentes com a microscopia e o cálculo potencial de Bogue, sendo que constituintes não quantificados nestes puderam ser introduzidos (C12A7 e sulfatos), bem como possibilitou a distinção entre polimorfos de um mesmo composto (C3A). A redução no tempo de análise e a diminuição da subjetividade das análises, face às metodologias usuais, constituem fatores importantes da técnica visando atender os interesses da indústria do cimento. / The project has focused on the application of X-ray diffraction (XRD) on the characterization and quantification of the Portland cement clinker crystalline compounds using the Rietveld method. The present research represents a pioneer scientific contribution on the theme in Brazil. Overall forty clinker samples from five distinct kiln lines were collected for analysis aiming to get a broad representativeness of various cement process parameters. Portland cement clinker is the sintered and pelletized product from calcination of an adequate mix of limestone and clay and minor corrective materials. The metastable Portland clinker compounds are subdivided into three main groups: calcium silicates (C3S and C2S), matrix (C4AF, C3A, C12A7) and minor components as periclase, free lime and sulfates. The proportioning of these phases are important parameters to the industry clinkering process. The Rietveld XRD method is based on the simulation of the whole diffraction spectrum from the components structural data, allowing for refining instrumental and crystallographic parameters. By comparing the calculated and actual diffractograms and minimizing differences mathematically through a least squares method quantitative values are obtained. The Rietveld XRD has shown to be a high reproducible quantification technique, with technical and logistics advantages in comparison to the more usual microscopy and Bogue potential calculation. Additional analytical techniques have given reference data to compare quantitative results obtained from Rietveld XRD and to correlate characteristics of the compounds with their diffractogram profile. Optical microscopy was the most relevant technique for comparison both qualitative and quantitatively. Scanning electronic microscopy - energy dispersive system has allowed recognition of phases that could not otherwise be identified by optical microscopy, like C12A7 and sulfates. Selective dissolution of silicates carried out in order to concentrate matrix compounds sustained the quantitative results of C3A polimorphs found by Rietveld XRD. Rietveld has shown coherent results with both microscopy and Bogue potential calculation, but additionnally made it possible quantifying other compounds like C12A7 and sulfates, as well as distinguishing C3A polimorphs. The significant time saving and subjectivity minimization it provides makes up key-factors for the cement industry needs.

Este estudo avaliou, quantitativamente, o osso regenerado após técnica de regeneração óssea guiada, utilizando osso autógeno em bloco e membrana de colágeno e descreveu seu processo de reparação ao redor de superfícies de implantes usinadas ou tratadas por jato de óxido de titânio em períodos de até 150 dias. Foram utilizados 60 ratos machos Wistar, divididos em 2 grupos: um recebeu implantes com superfície usinada (U) e o outro recebeu implantes com superfície tratada por jato de óxido de titânio (T). Uma trefina foi utilizada para a remoção do enxerto ósseo em bloco da calvária do animal. O enxerto foi fixado próximo ao ângulo da mandíbula do rato, na cortical vestibular, com o uso do implante. O conjunto foi coberto por membrana de colágeno. A ortotanásia foi realizada em 0, 14, 21, 45 e 150 dias. Foi realizado processamento histológico para material nãodescalcificado, e um corte no longo eixo do implante foi obtido para cada espécime. Foram realizadas análises qualitativa e quantitativa. Os dados foram analisados estatisticamente, em um nível de significância de 5%, pelos testes de Kruskal-Wallis e de Dunn. Os resultados relativos aos períodos de observação mostraram que a média do tamanho do defeito inicial foi de DO-U = 604,13 m e DO-T = 585,90 m (p=0,720) e que a média de espessura inicial do leito foi de EL-U = 257,29 m e ELT = 243,57 m (p=0,07); houve uma redução da espessura do enxerto no período de 150 dias para o grupo T em relação ao grupo U (EE-T = 338,25 m; EE-U = 407,71m) (p=0,003), não havendo outras diferenças significativas entre os grupos. Notou-se a presença de osso regenerado, vestibularmente ao enxerto, a partir de 21 dias, com uma nítida tendência ao aumento de sua espessura até o período de 150 dias, onde notamos um aumento da espessura óssea total de cerca de 4,6 (T) e 4,8 (U) vezes a espessura original da mandíbula, com valores de ETTO U = 1254,40 m e ETTO T = 1141,85 m (p=0,48). / This study quantitatively analyzed the regenerated bone after guided bone regeneration technique using autogenous block graft with resorbable membrane and described its pattern around machined titanium or oxide grit-blasted titanium surfaces in periods of up to 150 days. Sixty male, adult, Wistar rats were randomly assigned to one of two groups: machined titanium surface (U) or oxide grit-blasted titanium surface (T). A block graft was harvested from the rat calvarium with a trephine, laid and stabilized on the external cortex near the angle of the mandible with implants. A collagen membrane was adapted to completely cover the bone graft in both groups. The animals were euthanized at 0, 14, 21, 45 and 150 days after surgery. Nondecalcified histological sections were processed for each specimen and one section on the long axis of the implant was obtained. Qualitative and quantitative analysis were carried out. Statistical analyses were carried out with a significance level of 5% and used Kruskal-Wallis and Dunn tests. Results showed that the mean bone defect was DO-U = 604,13 m and DO-T = 585,90 m (p=0,720), and the mean mandible bone width was EL U = 257,29 m and EL-T = 243,57 m at zero hour. The mean graft width was reduced after 150 days for the T group as compared to group U (EET = 338,25 m and EE-U = 407,71 m) (p=0,003). No other significant differences between groups were observed. Regenerated bone was observed buccal to the bone graft after 21 days increasing in width after 150 days. The final mean mandible bone width after 150 days (ETTO-U = 1254,40 m and ETTO-T = 1141,85 m) achieved 4,8 (U) and 4,6 (T) times the original mandible width (p=0,48).

A RM convencional de rotina pode ser inconclusiva a cerca de um terço dos pacientes com epilepsia parcial (focal) refratária. Esses pacientes com RM negativa, quando indicados para cirurgia, representam um grande desafio, visto que a identificação de uma lesão estrutural epileptogênica por esse método pode ser considerada o melhor fator prognóstico para eliminação das crises no período pósoperatório. O objetivo foi avaliar o rendimento e a utilidade da RM quantitativa por meio de pós-processamentos individualizados nesse grupo de pacientes. Trata-se de um estudo prospectivo de uma coorte de 46 pacientes com epilepsia focal farmacorresistente com RM-3 Teslas não lesional e potenciais candidatos a cirurgia. Todos os pacientes foram submetidos a um novo protocolo de RM, incluindo 3D T1 e técnicas avançadas, e, posteriormente, avaliados por pós-processamentos individualizados de cinco medidas quantitativas extraídas dessas sequências. Essas medidas consistiram em espessura cortical (EC) e do sinal de junção entre as substâncias branca e cinzenta (JBC), ambas extraídas da sequência 3D T1, assim como da relaxometria T2 (RT2), taxa de transferência de magnetização (TTM) e difusibilidade média (DM). Os dados extraídos de todo o cérebro foram individualmente comparados com um grupo de controle saudáveis, utilizando-se das técnicas de análise baseada em superfície para a EC e de análises baseadas em voxel para as demais medidas. Utilizou-se do videoencefalograma de superfície e semiologia das crises para determinar a possível zona epileptogênica (ZE), sendo que 31 pacientes foram considerados como foco localizatório suspeito (FLS). As medidas quantitativas detectaram individualmente mudanças de sinal em alguma região do cérebro de 32,6% a 56,4% dos pacientes. No subgrupo classificado como FLS, os pós-processamentos detectaram individualmente alterações na região de origem eletroclínica das crises em 9,7% (3/31) a 31,0% (9/29) dos pacientes. Esse rendimento foi mais alto com a DM (31,0% ou 9/29) e RT2 (25,0% ou 7/28) e mais baixo com a EC e JBC (9,7% ou 3/31). Alterações observadas fora da região presumida da ZE foram sempre superiores, variando de 25,8% (8/31) a 51,7% (15/29). Em cinco pacientes (5/46 ou 10,9%) foi possível identificar alteração estrutural após a avaliação visual com direcionamento localizatório pelos pósprocessamentos. Embora a análise quantitativa da RM individualizada possa sugerir lesões ocultas no protocolo convencional, é preciso ter cautela devido à aparente baixa especificidade dos achados. Nesse grupo de pacientes, essas alterações devem refletir não só as alterações na região da ZE, mas também anormalidades microestruturais secundárias às crises ou, menos provavelmente, malformações cerebrais extensas não visíveis nos protocolos de rotina. Uma potencial utilidade prática desses métodos é auxiliar na colocação de eletrodos intracranianos em casos selecionados. Por outro lado, o estudo mostrou capacidade de detectar lesões potencialmente epileptogênicas que passaram despercebidas na inspeção visual convencional da RM após reavaliações dirigidas pelos pós-processamentos, notadamente pela medida da EC. Isso sugere que essas técnicas podem ser usadas como uma ferramenta de triagem para evitar que qualquer lesão visível seja ignorada ou a fim de guiar uma nova inspeção visual dirigida para uma região suspeita. / Conventional MRI may be inconclusive in about one-third of patients with refractory partial epilepsy. These patients with negative MRI when indicated for surgery represent a great challenge since the identification of an epileptogenic structural lesion by this method can be considered the best prognostic factor for the elimination of the crises in the postoperative period. Our objective was to evaluate the yield and utility of quantitative MRI through individualized post-processing in this group of patients. The present thesis is a prospective study of a cohort of forty-six patients with drug-resistant partial epilepsy, with non-lesional 3-Teslas MRI and potential surgical candidates. All patients underwent a new MRI protocol, including 3D T1 and advanced techniques, and were subsequently evaluated through individualized post-processing of five quantitative measures extracted from these sequences. These measurements consisted of the cortical thickness (CT) and the signal between the white and gray matters junction (WGJ), both extracted from the 3D T1 sequence, as well as the T2 relaxometry (RT2), magnetization transfer rate (MTR) and mean diffusibility (MD). Data extracted from the whole brain were individually compared to a healthy control group using surface-based analysis (SBM) techniques for CT and voxel-based analyzes (VBA) for the other measures. Surface VEEG and seizure semiology were used to determine the possible epileptogenic zone (EZ). Consequently 31 patients were considered to have a suspect location for the Focus (SLF). Quantitative measurements individually detected abnormalities in some regions of the brain from 32.6% to 56.4% of patients. In the subgroup classified as FLS post-processing individually detected abnormalities inside the region of electroclinical origin of seizures in 9.7% (3/31) to 31.0% (9/29) of the patients. This yield was higher with MD (31.0% or 9/29) and RT2 (25.0% or 7/28) and lower with CT and WGJ (9.7% or 3/31). Abnormalities observed outside the presumed EZ region were always higher, ranging from 25.8% (8/31) to 51.7% (15/29). In five patients (5/46 or 10.9%) it was possible to identify some structural abnormality after the MRI visual inspection with orientation of the location by post-processing. Although the MRI quantitative analysis through individualized post-processing may suggest hidden structural lesions in the conventional protocol, caution should be exercised because of the apparent low specificity of theses findings for the EZ. In this group of patients these abnormalities should reflect not only the alterations in the EZ region, but also the microstructural abnormalities secondary to the seizures or less likely extensive cerebral malformations not visible in the routine protocols. A practical potential utility of these methods is to assist in the placement of intracranial electrodes in selected cases. On the other hand, the study showed a certain capacity to detect potentially epileptogenic lesions that became unnoticed in the MRI conventional visual analysis after re-evaluations directed by post-processing, notably by CT measurement. This suggests that these methods should be used either as a screening tool to prevent any visible lesions from being ignored or to guide a new visual inspection directed to a suspect region.

La LIBS (Laser Induced Breakdown Spectroscopy) est une technique d'analyse élémentaire basée sur l'exploitation du spectre d'émission optique issu de l'ablation laser d'un échantillon. Aujourd'hui, la LIBS ne s'est pas encore imposée comme une technique de choix pour la majorité des applications comme c'est le cas pour les techniques de plasma à couplage inductif. L'une des principales raisons à cela est la difficulté à fournir des mesures quantitatives justes. Il existe donc aujourd'hui une nécessité de mieux comprendre et caractériser les plasmas et les phénomènes issus de l'interaction laser-Matière sur tout type de matériaux pour améliorer les performances de cette technique analytique. Cette interaction laser/matière étant, de plus, spécifique au type de matériau analysé, il est indispensable d'étudier ces effets sur une vaste gamme de matériaux. Deux types d'échantillons ont donc été utilisés pour étudier les plasmas LIBS: des matériaux contenant des terres rares et des matériaux plastiques. Les travaux réalisés sur les terres rares ont permis de sélectionner des raies d'analyse « disponibles », c'est-À-Dire sans interférences spectrales provenant des autres éléments de cette famille et suffisamment sensibles pour réaliser une analyse quantitative. Cette étude a mis en avant le fait que les effets de matrice dus à la quantité de terres rares et à la nature de l'échantillon sont importants. Ces effets de matrice sont propres à chaque élément et à chaque matrice, ils sont donc à prendre en considération pour toute analyse LIBS d'un échantillon contenant plusieurs terres rares. Si l'accumulation d'un grand nombre de terres rares a un effet significatif sur le signal d'un de ces analytes, leurs présences en nombre et quantité limitée (2 à 4) donnent un effet compensable par étalonnage interne. Dans le cadre de l'analyse LIBS des matériaux plastiques, une étude détaillée du signal en utilisant différentes conditions de plasma a été réalisée. L'analyse quantitative s'est portée sur plusieurs éléments dont certains difficiles à exciter comme le brome et le chlore. Grâce à l'utilisation d'une atmosphère contrôlée d'hélium, la détection des halogènes employés comme retardateurs de flamme dans les plastiques, a été possible. Un important effet de matrice a été observé à 266 nm en comparaison avec les résultats obtenus à 532 nm. Cependant, ces différences marquées à 266 nm ont permis la discrimination des quatre familles de polymères étudiées. En présence d'hélium, des différences significatives ont été obtenues pour les rapports C2/He et CN/He. En les traçant l'un en fonction de l'autre, il est ainsi possible de discriminer les différents types de plastiques étudiés / The LIBS (Laser Induced Breakdown Spectroscopy) technique is an elemental analysis technique based on the use of the optical emission spectrum from a sample of laser ablation. Today, LIBS has not emerged as a technique of choice for the majority of applications, as is the case for inductive coupled plasma techniques. One of the main reasons for this is the difficulty in providing accurate quantitative measurements. So there is now a need to better understand and characterize plasmas and phenomena from laser-Matter interaction on all types of materials to improve the performance of this analytical technique. This laser/material interaction is specific to the type of material analyzed, so it is essential to study these effects on a wide range of materials. Two types of samples have been used to study LIBS plasmas: materials containing rare earths and plastics. Work on rare earths were used to select the analytical lines free of spectral interference from other elements of this family and sensitive enough to carry out a quantitative analysis. This study highlighted the fact that the matrix effects due to the amount of rare earth and nature of the sample are important. These matrix effects are unique to each element and matrix, so they are to be considered in all LIBS analysis of a sample containing several rare earths. If the accumulation of a large number of rare earths (i.e 12) has a significant effect on the signal of the analytes, the effect of a limited number (i.e. 2 to 4) could be compensated by use on an internal standard. In the context of the LIBS analysis of plastic materials, a detailed study of the signal using different plasma conditions was performed. The quantitative analysis was focused on several elements, including bromine and chlorine which are difficult to excite. Through the use of a controlled atmosphere of helium, the detection of halogens used as flame retardants in plastics was significantly improved. An important matrix effect was observed at 266 nm in comparison with the results obtained at 532 nm. However, these differences at 266 nm allowed the discrimination of four families of polymers studied. In the presence of helium, significant differences were obtained for the C2 / He and CN / He ratios. This criteria was found to be relevant for the discrimination between the different types of plastics studied

The subject of this thesis is news, or, more particularly, the theory of news values, which was first published in 1965 by Johan Galtung and Mari Holmboe Ruge. Following the first chapter dealing with some aspects connected with the theory, such as tabloidization, story selection or the gatekeeping theory, is an in-depth description of the original concept of news values and a summary of its main impacts on the field of media studies. The thesis also introduces later studies, revising or interchanging the original concept. After that, the Czech weekly magazine Respekt is briefly introduced, for it is this particular magazine to which two news values concepts (the original by Galtung and Ruge and a later re-worked version by Harcup and O'Neill) are applied in quantitative content analysis. Within the monitored period of the first half of 2009, the values from both concepts are analysed on the front page topic, first on the front page itself (as conceived by the magazine, the front page always features a large hand- painted image), then within the referred article. As a conclusion, the results show the rate of presence of the values from both concepts, which leads to a general evaluation of the theory of news values and its influence on the story selection in Respekt.

The object of this diploma thesis is to cover and describe main selected aspects of reporting on refugee crisis in two key czech news programmes - in Zprávy FTV Prima and in Události ČT. Within the confines of one randomly chosen week in six months at the turn of the year 2016 and 2017 the author uses the quantitative method of analysis (with some elements of qualitative research) to describe in detail the discours chosen by these two powerful media institutions to inform the recipients. This work concentrates on most frequent topics, on their framing, on the linguistic and semantics codes etc. The initial part of the thesis offers insight into theoretical knowledge about this topic - history of migration in Czech territory, selected theoretical concepts and last but not least - the context, facts about the number og migrants living in CZ and EU also. The conclusions may serve as a basis for other analysis concerning this highly topical and very complex issue. The author perceives this subject as one of the most important event of late, which in addition strongly resonates with social and public life. It was in this very recent exodus that exposed how significant may the attitude of media be for shaping the public opinion and the strongest ones seem to be those who can connect both persuasive...

La tomodensitométrie est une technique très utile qui permet de mener avec succès des analyses non-invasives dans plusieurs types d'applications, par exemple médicales ou industrielles. L'analyse manuelle des structures d'intérêt présentes dans une image peut prendre beaucoup de temps, être laborieuse et parfois même impossible à faire en raison de sa complexité. C'est pour cela que dans cette thèse, nous proposons et développons des algorithmes nécessaires à cette analyse, basés sur la géométrie discrète et la topologie. Ces algorithmes peuvent servir dans de nombreuses applications, et en particulier au niveau de l'analyse quantitative automatique de l'arbre bronchique humain, sur la base d'images de tomodensitométrie. La première partie introduit les notions fondamentales de la topologie et de la géométrie discrètes utiles dans cette thèse. Ensuite, nous présentons le principe de méthodes utilisées dans de nombreuses applications : les algorithmes de squelettisation, de calcul de l'axe médian, les algorithmes de fermeture de tunnels et les estimateurs de tangentes. La deuxième partie présente les nouvelles méthodes que nous proposons et qui permettent de résoudre des problèmes particuliers. Nous avons introduit deux méthodes nouvelles de filtrage d'axe médian. La première, que nous appelons "hierarchical scale medial axis", est inspirée du "scale axis transform", sans les inconvénients qui sont propres à la méthode originale. La deuxième est une méthode nommée "discrete adaptive medial axis", où le paramètre de filtrage est adapté dynamiquement aux dimensions locales de l'objet. Dans cette partie, nous introduisons également des estimateurs de tangente nouveaux et efficaces, agissant sur des courbes discrètes tridimensionnelles, et que nous appelons "3Dlambda maximal segment tangent direction". Enfin, nous avons montré que la géométrie discrète et les algorithmes topologiques pouvaient être utiles dans le problème de l'analyse quantitative de l'arbre bronchique humain à partir d'images tomodensitométriques. Dans une chaîne de traitements de structure classique par rapport à l'état de l'art, nous avons appliqué des méthodes de topologie et de géométrie discrète afin de résoudre des problèmes particuliers dans chaque étape du processus de l'analyse quantitative. Nous proposons une méthode robuste pour segmenter l'arbre bronchique à partir d'un ensemble de données tomographiques (CT). La méthode est basée sur un algorithme de fermeture de tunnels qui est utilisé comme outil pour réparer des images CT abîmées par les erreurs d'acquisition. Nous avons aussi proposé un algorithme qui sert à créer un modèle artificiel d'arbre bronchique. Ce modèle est utilisé pour la validation des algorithmes présentés dans cette thèse. Ensuite nous comparons la qualité des différents algorithmes en utilisant un ensemble de test constitué de fantômes (informatiques) et d'un ensemble de données CT réelles. Nous montrons que les méthodes récemment présentées dans le cadre des complexes cubiques, combinées avec les méthodes présentées dans cette thèse, permettent de surmonter des problèmes indiqués par la littérature et peuvent être un bon fondement pour l'implémentation future des systèmes de quantification automatique des particularités de l'arbre bronchique / Computed tomography is a very useful technic which allow non-invasive diagnosis in many applications for example is used with success in industry and medicine. However, manual analysis of the interesting structures can be tedious and extremely time consuming, or even impossible due its complexity. Therefore in this thesis we study and develop discrete geometry and topology algorithms suitable for use in many practical applications, especially, in the problem of automatic quantitative analysis of the human airway trees based on computed tomography images. In the first part, we define basic notions used in discrete topology and geometry then we showed that several class of discrete methods like skeletonisation algorithms, medial axes, tunnels closing algorithms and tangent estimators, are widely used in several different practical application. The second part consist of a proposition and theory of a new methods for solving particular problems. We introduced two new medial axis filtering method. The hierarchical scale medial axis which is based on previously proposed scale axis transform, however, is free of drawbacks introduced in the previously proposed method and the discrete adaptive medial axis where the filtering parameter is dynamically adapted to the local size of the object. In this part we also introduced an efficient and parameter less new tangent estimators along three-dimensional discrete curves, called 3D maximal segment tangent direction. Finally, we showed that discrete geometry and topology algorithms can be useful in the problem of quantitative analysis of the human airway trees based on computed tomography images. According to proposed in the literature design of such system we applied discrete topology and geometry algorithms to solve particular problems at each step of the quantitative analysis process. First, we propose a robust method for segmenting airway tree from CT datasets. The method is based on the tunnel closing algorithm and is used as a tool to repair, damaged by acquisition errors, CT images. We also proposed an algorithm for creation of an artificial model of the bronchial tree and we used such model to validate algorithms presented in this work. Then, we compare the quality of different algorithms using set of experiments conducted on computer phantoms and real CT dataset. We show that recently proposed methods which works in cubical complex framework, together with methods introduced in this work can overcome problems reported in the literature and can be a good basis for the further implementation of the system for automatic quantification of bronchial tree properties

Since Greta Thunberg started her environmental school strike in August 2018 she has become a world famous activist and has been portrayed in news media everywhere. The aim of this bachelor study has been to examine how Greta Thunberg has been portrayed in the Swedish news media through examining two daily press newspapers and two evening press newspapers. This resulted in analyzing articles in Aftonbladet, Expressen, Dagens Nyheter and Svenska Dagbladet. By using a qualitative and a quantitative content analysis we investigated three different events connected to Greta Thunberg through published articles. During 2018 the event that started her journey, which is the school strike, was selected as one of these happenings. During 2019 we chose her UN- speech in New York, and for the last event her speech at the World Economic Forum's Annual Meeting in Davos was chosen. By choosing these specific events we could build a perception of what the media's portrayal of Greta Thunberg has been like during these three years. Therefore this study also aimed to answer the following research questions: - How has Greta Thunberg been portrayed in the daily press and the evening press? - Has the portrayal of Greta Thunberg changed over time? In this study we used the Framing Theory and also the protest paradigms as guidelines and we also applied von Zabern & Tulloch (2020) and Bergmann & Ossewaardes (2020) different frames. This study then led to an identification of a new framing of Greta Thunberg which we named “Speaking without speaking”, mostly consisting of what politicians and celebrities are saying about Greta Thunberg in the press. We also found that by examining these specific events that Greta Thunberg has been portrayed in different ways. Therefore we could also conclude that the framings and portrayals of Greta Thunberg changed throughout time. This means that she went from being portrayed as a young girl skipping school for the climate, to a world famous environmental activist and finally becoming a trustworthy leader. Therefore our study shows that Greta Thunberg was being undermined due to her young age in the ibeginning, but as her status grew the media changed their portrayal of her into the role model that she has become today.

Au sein de la communauté scientifique, l’étude des réseaux d’énergie suscite un vif intérêt puisque ces infrastructures deviennent de plus en plus importantes dans notre monde moderne. Des outils mathématiques avancés et complexes sont nécessaires afin de bien concevoir et mettre en œuvre ces réseaux. La précision et l’optimalité sont deux caractéristiques essentielles pour leur conception. Bien que ces deux aspects soient au cœur des méthodes formelles, leur application effective reste largement inexplorée aux réseaux d’énergie. Cela motive fortement le travail développé dans cette thèse. Un accent particulier est placé sur le problème général de planification de la consommation d'énergie. Il s'agit d'un scénario dans lequel les consommateurs ont besoin d’une certaine quantité d’énergie et souhaitent que cette demande soit satisfaite dans une période spécifique (e.g., un Véhicule Électrique (VE) doit être rechargé dans une fenêtre de temps définie par son propriétaire). Par conséquent, chaque consommateur doit choisir une puissance de consommation à chaque instant (par un système informatisé), afin que l'énergie finale accumulée atteigne un niveau souhaité. La manière dont les puissances sont choisies est obtenue par l’application d’une « stratégie » qui prend en compte à chaque instant les informations pertinentes d'un consommateur afin de choisir un niveau de consommation approprié (e.g., l’énergie accumulée pour recharge le VE). Les stratégies peuvent être conçues selon une approche centralisée (dans laquelle il n'y a qu'un seul décideur qui contrôle toutes les stratégies des consommateurs) ou décentralisée (dans laquelle il y a plusieurs contrôleurs, chacun représentant un consommateur). Nous analysons ces deux scénarios dans cette thèse en utilisant des méthodes formelles, la théorie des jeux et l’optimisation. Plus précisément, nous modélisons le problème de planification de la consommation d'énergie à l'aide des processus de décision de Markov et des jeux stochastiques. Par exemple, l’environnement du système électrique, à savoir : la partie non contrôlable de la consommation totale (e.g., la consommation hors VEs), peut être représentée par un modèle stochastique. La partie contrôlable de la consommation totale peut s’adapter aux contraintes du réseau de distribution (e.g., pour ne pas dépasser la température maximale d'arrêt du transformateur électrique) et à leurs objectifs (e.g., tous les VEs soient rechargés). Cela peut être vu comme un système stochastique avec des multi-objectifs sous contraintes. Par conséquent, cette thèse concerne également une contribution aux modèles avec des objectives multicritères, ce qui permet de poursuivre plusieurs objectifs à la fois et une conception des stratégies qui sont fonctionnellement correctes et robustes aux changements de l'environnement. / Within the research community, there is a great interest in exploring many applications of energy grids since these become more and more important in our modern world. To properly design and implement these networks, advanced and complex mathematical tools are necessary. Two key features for their design are correctness and optimality. While these last two properties are in the core of formal methods, their effective application to energy networks remains largely unexploited. This constitutes one strong motivation for the work developed in this thesis. A special emphasis is made on the generic problem of scheduling power consumption. This is a scenario in which the consumers have a certain energy demand and want to have this demand fulfilled before a set deadline (e.g., an Electric Vehicle (EV) has to be recharged within a given time window set by the EV owner). Therefore, each consumer has to choose at each time the consumption power (by a computerized system) so that the final accumulated energy reaches a desired level. The way in which the power levels are chosen is according to a ``strategy’’ mapping at any time the relevant information of a consumer (e.g., the current accumulated energy for EV-charging) to a suitable power consumption level. The design of such strategies may be either centralized (in which there is a single decision-maker controlling all strategies of consumers), or decentralized (in which there are several decision-makers, each of them representing a consumer). We analyze both scenarios by exploiting ideas originating from formal methods, game theory and optimization. More specifically, the power consumption scheduling problem can be modelled using Markov decision processes and stochastic games. For instance, probabilities provide a way to model the environment of the electrical system, namely: the noncontrollable part of the total consumption (e.g., the non-EV consumption). The controllable consumption can be adapted to the constraints of the distribution network (e.g., to the maximum shutdown temperature of the electrical transformer), and to their objectives (e.g., all EVs are recharged). At first glance, this can be seen as a stochastic system with multi-constraints objectives. Therefore, the contributions of this thesis also concern the area of multi-criteria objective models, which allows one to pursue several objectives at a time such as having strategy designs functionally correct and robust against changes of the environment.