<p dir="ltr">This work is the first report of optically addressable spin qubits in a semi-1D material, Boron Nitride Nanotubes (BNNTs). We perform the characterization of these spin defects and utilize their properties to do omnidirectional magnetic field sensing. We transfer these BNNTs with spin defects onto an AFM cantilever and perform scanning probe magnetometry of a 2D Nickel pattern on a gold waveguide. </p>

<p dir="ltr">Following the development of laser technology in the 1960s, radiation pressure was soon employed to manipulate particles by Arthur Ashkin in the 1970s. Since then, levitated optomechanics has been widely studied across physics, engineering, chemistry, and biology. In this dissertation, we first experimentally demonstrate GHz rotation and sensing with an optically levitated nanodumbbell near a surface. Then, we propose achieving optical refrigeration below liquid nitrogen temperature using near-field Purcell enhancement.</p><p dir="ltr">The first part of this dissertation focuses on fast rotation and sensing with a non-spherical silica nanoparticle levitated near a surface. Specifically, we optically levitate a nanodumbbell at 430 nm away from a surface in high vacuum and drive it to rotate at 1.6 GHz. This corresponds to a relative linear velocity of 1.4 km/s between the tip of the nanodumbbell and the surface at sub-micrometer separation. The near-surface rotating nanodumbbell demonstrates a superior torque sensitivity of (5.0 +/- 1.1 ) x 10^-26 Nm at room temperature. Our numerical simulation shows that such an ultra-sensitive nanodumbbell levitated near nanostructures can be used to detect fundamental physics, such as Casimir torque and non-Newtonian gravity. </p><p dir="ltr">In the latter part of this dissertation, we propose that optical refrigeration of solid with anti-Stokes fluorescence can be enhanced by Purcell effect. The spontaneous emission rate of high-energy photons is Purcell enhanced by coupling with a near-field cavity. The enhanced emission shifts the mean emission wavelength and enables optical refrigeration with high-absorption cooling laser. We estimate a minimum achievable temperature of 38 K with a Yb³⁺:YLiF₄ nanocrystal near a cavity using our proposed Purcell enhanced optical refrigeration method. This method can be applied to other rare-earth ion doped materials and enable applications that require solid-state cooling below liquid nitrogen temperature.</p>

<p dir="ltr">As the design of computer chips heavily relies on computer simulations, it is envisioned that numerical modeling will play an increasingly important role in the development of unconventional computing technologies. This thesis studies the computational frameworks related to the development of unconventional computing, including probabilistic computing and quantum computing. The capability of probabilistic computing in solving NP-complete number theory problems is demonstrated. Generalized Helmholtz decomposition is shown as a theoretical basis for quantization of electromagnetic fields via numerical mode decomposition. A 2D demonstration of numerical quantization with finite difference method is presented. A computational framework amenable to integral equation solver is proposed to investigate the scattering effect on momentum-entangled photons from spontaneous parametric downconversion. A generic model to investigate field-matter interaction with nonlinearity is presented.</p>

<p>  </p> <p>Low-dimensional materials (LDMs) are substances that have at least one dimension with thicknesses in the nanometer (nm) scale. They have attracted tremendous research interests in many fields due to their unique properties that are absent in bulk materials. For instance, in quantum optics/photonics, LDMs offer unique advantages for effective light extraction and coupling with photonic/plasmonic structures; in chemistry, the large surface-to-volume ratio of LDMs enables more efficient chemical processes that are useful for numerous applications. In this thesis, several types of LDMs are studied and engineered with the goal to improve their impact in plasmonic and quantum photonic applications. Two-dimensional hexagonal boron nitride (hBN) is receiving increasing attention in quantum optics/photonics as it hosts various types of quantum emitters that are promising for quantum computing, quantum sensing, etc. In the first study, we explore and demonstrate a radiation- and lithography-free route to deterministically create single-photon emitters (SPEs) in hBN by nanoindentation with an atomic force microscopy. The method applies to hBN on flat, chip-compatible silicon-based substrates, and an SPE yield of up to 36% is achieved. This marks an important step toward the deterministic creation and integration of hBN SPEs with photonic and plasmonic devices. In the second study, the recently discovered negatively charged boron vacancy (V_B^-) spin defect in hBN is investigated. V_B^- defects are optically active with spin properties suitable for sensing at extreme scales. To resolve the low brightness issue of V_B^- defects, we couple them with an optimized nano-patch antenna structure and observe emission intensity enhancement that is nearly an order of magnitude higher than previous reports. Our achievements pave the way for the practical integration of V_B^- defects for quantum sensing. Zero-dimensional nanodiamond is another important host material for solid-state SPEs. Specifically, the negatively charged silicon vacancy (SiV) center in nanodiamonds exhibits optical properties that are suitable for quantum information technologies. In the third study, we, for the first time, demonstrate the creation of single SiV centers in nanodiamonds with an average size of ~20 nm using ion implantation. Stable single-photon emission is confirmed at room temperature, with zero-phonon line (ZPL) wavelengths in the range of 730 – 803 nm. This confirms the feasibility of single-photon emitter creation in nanodiamonds with ion implantation, and offers new opportunities to integrate diamond color centers for hybrid quantum photonic systems. Finally, we have also explored using metal-semiconductor hybrid nanoparticles for plasmon-enhanced photocatalysis. A core-shell nanoparticle structure is synthesized, with titanium nitride (TiN) and titanium dioxide (TiO₂) being the core and shell material respectively. It is observed that such core-shell nanoparticles effectively catalyze the generation of single oxygen molecules under 700-nm laser excitation. The main mechanism behind is the hot electron injection from the TiN core to the TiO₂ shell. Considering the chemical inertness and low cost of TiN, TiN@TiO₂ NPs hold great potential as plasmonic photosensitizers for photodynamic therapy and other photocatalytic applications at red-to-near-infrared (NIR) wavelengths.</p>

<p>Developing a hybrid platform that combines nanophotonic circuits and atomic physic may provide new chip-scale devices for quantum application or versatile tools for exploring photon-mediated long-range quantum systems. However, this challenging project demands the excellent integration of cold atom trapping and manipulation technology with cutting-edge nanophotonics circuit design and fabrication. In this thesis project, we aim to develop a novel suspended membrane platform that serves as a quantum interface between laser-cooled, trapped atoms in an ultrahigh vacuum and the photons guided in the nanophotonic circuits based on high-quality silicon nitride microring resonators fabricated on a transparent membrane substrate. </p> <p><br></p> <p>The proposed platform meets the stringent performance requirements imposed by nanofabrication and optical physics in an ultra-high vacuum. These include a high yield rate for mm-scale suspended dielectric photonic devices, minimization of the surface roughness to achieve ultrahigh-optical quality, complete control of optical loss/in-coupling rate to achieve critical photon coupling to a microring resonator, and high-efficiency waveguide optical input/output coupler in an ultrahigh vacuum environment. This platform is compatible with laser-cooled and trapped cold atoms. The experimental demonstration of trapping and imaging single atoms on a photonic resonator circuit using optical tweezers has been demonstrated. Our circuit design can potentially reach a record-high cooperativity parameter C$>$500 for single atom-photon coupling, which is of high importance in realizing a coherent quantum nonlinear optical platform and holds great promise as an on-chip atom-cavity QED platform.</p>

<p><br></p><p dir="ltr">Achieving high optical resolution imaging is one of the most important goals in the history of optics. However, due to finite aperture sizes, a diffraction limit is imposed on optical imaging. Therefore, the Rayleigh limit, which describes the minimum separation at which two point sources are resolvable, has served as a critical limit in optical resolution. Many methods have been studied to break the limit and succeed in resolving nearby sources below the Rayleigh criterion but only beyond a certain distance. Furthermore, it has been demonstrated that quantum-inspired optics techniques maintain consistent variance in estimating the separation of point sources even at low separations, but only with prior information like a known number of sources and equal brightness. Therefore, achieving the ultimate optical resolution remains an open question. This thesis will conclusively address this challenge considering real-world scenarios, i.e., no prior information or controlled lab environment as well as low signal-to-noise ratio (SNR), turbulence, and other practical challenges.</p><p><br></p><p dir="ltr">In information theory, the estimation variance of a random parameter can be quantified using the inverse of Fisher information. By maximizing the Fisher information, one can minimize the variance in estimation. In my thesis, we have shown that the measurement can be accelerated without sacrificing optical resolution using the adaptive mode so that quantum Fisher information per detected photon is maximized. The notable attribute that sets it apart from other quantum-inspired methods is that it does not require any prior information, making it more feasible for practical application. We have further shown that the space domain awareness (SDA) challenge can be effectively handled with the aforementioned approach with a very limited photon budget and even in the presence of turbulence. Toward solving the challenges, we designed a photon statistics-based direct imaging method that can also serve as a baseline method for quantum optics. In my thesis, atmospheric turbulence is also deeply explored and the effect is mitigated using reinforcement learning.</p><p><br></p>

<p>Dipole-dipole interactions are ubiquitous fundamental physical phenomena that govern physical effects such as Casimir Forces, van der Waals forces, collective Lamb shifts, cooperative decay, and resonance energy transfer. These interactions are associated with real and virtual photon exchange between the interacting emitters. Such interactions are crucial in realizing quantum memories, novel super-radiant light sources, and light-harvesting devices. Owing to this, the control and modification of dipole-dipole interactions have been a longstanding theme. The electromagnetic environment plays a crucial role in enhancing the range and strength of the interactions. This work focuses on modifying the nanophotonic environment near interacting emitters to enhance dipole-dipole interactions instead of spontaneous emission. To this end, we focus on engineering the nanophotonic environment to enhance the strength and range of dipole-dipole interactions between an ensemble of emitters. We explore ordered and disordered nanophotonic structures. We experimentally demonstrate long-range dipole-dipole interactions mediated by surface lattice resonances in a periodic plasmonic nanoparticle lattice. Further, the modified electromagnetic environment reduces the apparent dimensionality of the interacting system compared to non-resonant in-homogeneous and homogeneous environments. We also develop a spectral domain inverse design technique for the accelerated discovery of disordered metamaterials with unique spectral features. </p> <p>Further, we explore the novel regimes of light localization at near-zero-index in such disordered media. The disordered near-zero-index medium reveals enhanced localization and near-field chirality. This work paves the way to engineer the electromagnetic nanophotonic environment to realize enhanced long-range dipole-dipole interactions.</p>

<p>One of the fundamental predictions of quantum mechanics is the occurrence of random fluctuations which can induce a measurable force between neutral objects, known as the Casimir effect. Casimir effect has attracted a lot of interest in both theoretical and practical work since the first prediction in 1948 because it is the most accessible evidence of quantum electromagnetic fluctuations in vacuum. Besides, it has prospective applications for nanotechnology and for studying fundamental physical theories beyond the standard model. In this dissertation, we report the experimental and theoretical progress towards realizing Casimir-based devices and long sought-after vacuum friction. </p> <p><br></p> <p>First, we propose and experimentally realize the first Casimir diode system that can regulate energy transfer along one direction through quantum vacuum fluctuations. This is the first experimental demonstration of non-reciprocal energy transfer by Casimir effects. We develop a dual-cantilever vacuum system which can be used to measure the Casimir force at separations from 50 nm to 1000 nm.  Parametric coupling scheme is applied to the system to couple two cantilevers with different resonant frequencies by Casimir interaction. By controlling the system near the exceptional point, we are able to break the time reversal symmetry and observe the non-reciprocal energy transfer. </p> <p><br></p> <p>The description of the Casimir diode system is followed by an experimental demonstration of the Casimir transistor system where we achieve the first measurement of Casimir interaction between three macroscopic objects. Three cantilevers can be coupled through quantum vacuum fluctuations by the parametric coupling scheme. Moreover, we have realized the first three-terminal Casimir transistor system that can switch and amplify quantum vacuum mediated energy transfer. These two Casimir-based devices will have potential applications in sensing and information processing.  </p> <p><br></p> <p>Subsequently, the first observation of Casimir mediated non-contact friction is demonstrated experimentally. When two parallel surfaces are moving with a relative velocity, they will experience quantum vacuum friction force which tries to slow down the relative motion because of quantum vacuum fluctuations. The quantum vacuum friction comes from the exchange of virtual photons between two moving bodies.  We have designed a novel method to detect the Casimir force mediated non-contact friction force between two harmonic oscillators. The non-contact friction comes from the interaction of virtual photons and phonons. We have experimentally detected the effect of non-contact friction and successfully measured the friction force at different velocities. </p> <p><br></p> <p>In the latter part of this thesis, two theoretical proposals about detecting the Casimir torque and rotational quantum vacuum friction torque by a levitated optomechanical system are discussed. The optically levitated nanoparticle system is a good candidate for precision measurements because it can achieve an ultrahigh mechanical quality factor due to the well isolation from the thermal environment. The calculation of the Casimir torque on a levitated nanorod near a birefringent plate is demonstrated. The calculation of the rotational quantum vacuum friction torque on a rotating nanosphere near a plate is also presented. By comparing these small torques to the sensitivity of our levitation system, we show that it is feasible to detect the Casimir torque and the rotational quantum vacuum friction torque under realistic conditions in the near future. </p> <p><br></p>

<p dir="ltr">This thesis is about the exciting discovery of a new kind of single photon emitter that<br>is suspected to occur at the interface of silicon nitride SixNy and silicon dioxide SiO2 after<br>being rapidly annealed. Since SixNy is one of the most developed platforms for integrated<br>photonics the discovery of a native emitter in this platform opened up the possibility for<br>seamless integration of these single photon emitters with photonic circuitry for the first<br>time. This seamless integration was demonstrated as is shown in Chapter 3 by creating the<br>emitters and then patterning the SixNy layer into a waveguide. This work demonstrated for<br>the first time the coupling of such single photon emitters with on-chip integrated photonics.<br>However, the integration approach demonstrated was based on the stochastic integration of<br>emitters which limits the efficiency of the devices and the possible types of devices that can<br>be designed. This is why the next stage of research focused on the development of a site-<br>controlled process for creating these single photon emitters. Remarkably, it was found that<br>if the SixNy and SiO2 are nanostructured into nanopillars and then annealed then a single<br>photon emitter forms over 65% of the time within the nanopillar! Due to the lithography<br>defined nature of this process for creating the single photon emitters the first multi-mask<br>integration process was also developed and demonstrated. This fabrication process was used<br>to demonstrate the integration of several thousand single photon emitters with complex<br>integrated photonic structures such as topology optimized couplers. These developments<br>has generated a great deal of excitement due to the inherent scalability of the approach and<br>it’s obvious applications for the development of very large scale integrated (VLSI) on-chip<br>quantum photonic systems.</p>

<p dir="ltr">Quantum-enhanced approaches enable high-resolution imaging and sensing with signal-to-noise ratios beyond classical limits. However, operating in the quantum regime is highly susceptible to environmental influences and experimental conditions. Implementing these techniques necessitates highly controlled environments or intricate preparation methods, which can restrict their practical applications. This thesis explores the practical applications of quantum sensing, focusing on thermal sensing with bright quantum sources in biological and electronic contexts. Additionally, I discuss the development of a multimode source for quantum imaging applications and an on-chip atomic interface for scalable light-atom interactions. I built all the experimental setups from the beginning; a microscope setup for nanodiamond-based thermal sensing inside living cells, a four-wave mixing setup using a Rb cell for thermal imaging of microelectronics and multimode source, and a vacuum chamber for on-chip atomic interface.</p><p dir="ltr">Quantum sensing can be realized using atomic spins or optical photons possessing quantum information. Among these, color centers inside diamonds stand out as robust quantum spin defects (effective atomic spins), maintaining their quantum properties even in ambient conditions. In this thesis, I studied the role of an ensemble of color centers inside nanodiamonds as a probe of temperature in a living cell. Our approach involves incubating nanodiamonds in endothelial culture cells to achieve sub-kelvin sensitivity in temperature measurement. The results reveal a temperature error of 0.38 K and a sensitivity of 3.46 K/sqrt(Hz)<i> </i>after 83 seconds of measurement. Furthermore, I discuss the constraints of nanodiamond temperature sensing in living cells, propose strategies to surmount these limitations, and explore potential applications arising from such measurements.</p><p dir="ltr">Another ubiquitous quantum probe is light with quantum properties. Photons, the particles of light, can carry quantum correlations and have minimal interactions with each other and, to some extent, the environment. This capability theoretically allows for quantum-enhanced imaging or sensing of sample’s properties. In this thesis, I report on the demonstration of quantum-enhanced temperature sensing in microelectronics using bright quantum optical signals. I discuss the first demonstration of quantum thermal imaging used to identify hot spots and analyze heat transport in electronic systems.</p><p dir="ltr">To achieve this, we employed lock-in detection of thermoreflectivity, enabling us to measure temperature changes in a micro-wire induced by an electric current with an accuracy better than 0.04 degrees, averaged over 0.1 seconds. Our results demonstrate a nearly 50 % improvement in accuracy compared to using classical light at the same power, marking the first demonstration of below-shot-noise thermoreflectivity sensing. We applied this imaging technique to both aluminum and niobium-based circuits, achieving a thermal resolution of 42 mK during imaging. We scanned a 48 × 48 μm<i> </i>area with 3-4 dB squeezing compared to classical measurements. Based on these results, we infer possibility of generating a 256×256 pixel image with a temperature sensitivity of 42 mK within 10 minutes. This quantum thermoreflective imaging technique offers a more accurate method for detecting electronic hot spots and assessing heat distribution, and it may provide insights into the fundamental properties of electronic materials and superconductors.</p><p dir="ltr">In transitioning from single-mode to multimode quantum imaging, I conducted further research on techniques aimed at generating multimode quantum light. This involved an in-depth analysis of the correlation characteristics essential for utilizing quantum light sources in imaging applications. To achieve the desired multimode correlation regime, I developed a system centered on warm Rubidium vapor with nonlinear gain and feedback processes. The dynamics of optical nonlinearity in the presence of gain and feedback can lead to complexity, even chaos, in certain scenarios. Instabilities in temporal, spectral, spatial, or polarization aspects of optical fields may arise from chaotic responses within an optical <i>x</i>(2) or <i>x</i>(3) nonlinear medium positioned between two cavity mirrors or preceding a single feedback mirror. However, the complex mode dynamics, high-order correlations, and transitions to instability in such systems remain insufficiently understood.</p><p dir="ltr">In this study, we focused on a <i>x</i>(3) medium featuring an amplified four-wave mixing process, investigating noise and correlations among multiple optical modes. While individual modes displayed intensity fluctuations, we observed a reduction in relative intensity noise approaching the standard quantum limit, constrained by the camera speed. Remarkably, we recorded a relative noise reduction exceeding 20 dB and detected fourth-order intensity correlations among four spatial modes. Moreover, this process demonstrated the capability to generate over 100 distinct correlated quadruple modes.</p><p dir="ltr">In addition to conducting multimode analysis to develop a scalable imaging system, I have explored methodologies aimed at miniaturizing light-atom interactions on a chip for the scalable generation of quantum correlations. While warm atomic vapors have been utilized for generating or storing quantum correlations, they are plagued by challenges such as inhomogeneous broadening and low coherence time. Enhancing control over the velocity, location, and density of atomic gases could significantly improve light-atom interaction. Although laser cooling is a common technique for cooling and trapping atoms in a vacuum, its implementation in large-scale systems poses substantial challenges. As an alternative, I focused on developing an on-chip system integrated with atomic vapor controlled by surface acoustic waves (SAWs).</p><p dir="ltr">Surface acoustic waves are induced by an RF signal along the surface of a piezoelectric material and have already been proven to be effective for manipulating particles within microfluidic channels. Expanding upon this concept, I investigated the feasibility of employing a similar approach to manipulate atoms near the surface of a photonic circuit. The interaction between SAWs and warm atomic vapor is expected as a mechanism for controlling atomic gases in proximity to photonic chips for quantum applications. Through theoretical analysis spanning molecular dynamics and fluid dynamics regimes, I identified the experimental conditions necessary to observe acoustic wave behavior in atomic vapor. To validate this theory, I constructed an experiment comprising a vacuum chamber housing Rb atoms and a lithium niobate chip featuring interdigital transducers for launching SAWs. However, preliminary experimental results yielded no significant signals from SAW-atom interactions. Subsequent analysis revealed that observing such interactions requires sensitivity and signal-to-noise ratio (SNR) beyond the capabilities of the current setup. Multiple modifications, including increasing buffer gas pressure and mitigating RF cross-talk, are essential for conclusively observing and controlling these interactions.</p>