Spelling suggestions: "subject:"kuantum"" "subject:"auantum""
1 |
Synthesis and characterization of lead-based core-shell-shell quantum dots and studies on excitation-dependent quantum yield measurementCao, Jieming 11 August 2015 (has links)
Nano-sized semiconductors, known as quantum dots (QDs), are one of the hottest research areas in recent years. The energy gaps of QDs change with their diameters, giving them size-dependent optical properties. By controlling reaction conditions, people are able to make QDs that can emit in certain wavelength ranges. So far, QDs have shown great potential in telecommunication, bio-imaging, single-photon laser source, etc.
This thesis starts with Chapter 1, which first introduces the finding of QDs and why they have such special properties. The quantum confinement and energy gap are discussed, followed by the absorption and emission of QDs. Moreover, the synthesis methods and mechanism involved are reviewed in brief.
Chapter 2 presents the synthesis of lead-based core, core-shell and core-shell-shell QDs and previous work by other people. A few techniques including transmission electron microscopy (TEM), UV-absorption, photoluminescence (PL) measurement, and X-ray photoelectron spectroscopy (XPS) were used and shown in this chapter. Core-shell and core-shell-shell QDs are shown to present excellent stability over 20 months. The ZnS shell was proved by energy-dependent XPS and TEM measurements.
A detailed discussion on quantum yield (QY) is given in Chapter 3. Absolute and relative QY measurements and some standard dyes are discussed. After that, Chapter 4 shows systematic QY measurements on lead-based core and core-shell QDs. For each type of QDs, at least two batches are selected with their emission spectra presented as well. It is revealed by collected data that they have excitation-dependent QYs. The QY drops as the excitation light increases in energy (higher wavelength), which is due to non-radiative decays from higher excited states or the Auger effects. QY of PbS and PbSe QDs can be as high as 50%.
Eventually, the conclusion and future work are included in Chapter 5. All experimental work is described in detail in the experimental section. / Graduate
|
2 |
Localisation des ganglions sentinelles au moyen de quantum dots : application au cancer du sein / Sentinel lymph node mapping with quantum dots : Breast cancer applicationPic, Emilie 03 November 2009 (has links)
Le statut ganglionnaire a la valeur pronostique la plus importante chez les patientes atteintes d’un cancer du sein, le taux de survie étant corrélé au nombre de ganglions envahis. Dans le traitement des cancers du sein opérables d'une taille inférieure à 3 cm, la technique du ganglion sentinelle (GS) remplace le curage ganglionnaire de stadification. Toutefois, cette technique nécessite l’emploi simultané de radioisotopes et de colorants physiologiques présentant divers effets secondaires. Ainsi, notre stratégie a été de tester, sur modèle pré-clinique de nouveaux traceurs fluorescents, les Quantum Dots (QDs), pour la technique du GS. Une étude sur la détection in vivo du ganglion axillaire (GA) par spectrofluorimétrie fibrée après injection sous-cutanée (s.c.) de QDs émettant dans le rouge a été réalisée et leur quantification ex vivo a été effectuée par spectrofluorimétrie jusqu’à 24 h. Ce travail a montré l’accumulation rapide et sélective des QDs dans le GA chez la souris. Une étude sur la localisation in vivo de 2 ganglions régionaux par imagerie de fluorescence a été réalisée suite à l’administration s.c. de QDs émettant dans le proche infrarouge (PIR) ainsi qu’une étude de biodistribution ex vivo par spectrométrie de masse (ICP-MS). Les résultats obtenus ont montré que l’imagerie de fluorescence pouvait être utilisée après injection de QDs pour localiser et suivre leur accumulation dans les ganglions superficiels chez la souris saine. Pour se rapprocher de la clinique, le repérage in vivo du GS axillaire a été investi sur modèle tumoral murin de cancer du sein par imagerie de fluorescence après administration s.c. de QDs émettant dans le PIR. Deux techniques de détection des métastases ganglionnaires ont été utilisées puis comparées : l’histologie conventionnelle et la RT-PCR. Tous les GS axillaires ont été détectés in vivo par imagerie, sauf un GS qui était complètement envahi par les cellules tumorales et la meilleure incidence de métastases ganglionnaire a été observée avec la RT-PCR. Ainsi, les QDs pourraient être utilisés comme substitut des marqueurs actuellement employés dans la technique du GS pour les cancers du sein. / Lymph node (LN) status is the most important prognostic factor in breast cancer patients and a determinant predictor of recurrence and survival. In the treatment of operable breast cancers with a size inferior of 3 cm, the sentinel lymph node biopsy (SLNB) substitutes the axillary LN dissection. However, this technique requires the simultaneous use of a radiocolloid and a physiologic dye, which present several secondary effects. Thus, our strategy was to test in preclinical model the new fluorescent markers, Quantum Dots (QDs) for SLNB. A study on in vivo axillary LN (ALN) mapping by light induced fluorescence was performed after subcutaneous (s.c.) injection of red-emitting QDs and their ex vivo quantification was realized by spectrofluorimetry for up to 24 h. We showed a fast and selective accumulation of QDs in ALN in healthy mice. An in vivo study on localization of 2 regional LNs by fluorescence imaging was carried out after the s.c. administration of near-infrared (NIR) emitting QDs along with ex vivo biodistribution study by mass spectroscopy (ICP-MS). Obtained results shown that fluorescence imaging can be used after QDs injection to map and follow their accumulation in superficial LNs in healthy mice. To approach the human clinic in a best possible way, sentinel ALN mapping was investigated after s.c. delivery of NIR emitting QDs in murine breast cancer model by fluorescence imaging. Two techniques for LN metastasis detection were used and compared: conventional histology and RT-PCR. All sentinel ALNs were located in vivo by imaging except one ALNs which was completely invaded by cancer cells and best incidence of LN metastasis was registered by RT-PCR (60 %). Thus, QDs could be used as a substitute for the markers currently employed in SLNB in breast cancers.
|
3 |
Photon sources for linear optical quantum computingLee, James January 2019 (has links)
Quantum photonic technologies have many exciting applications including secure commu- nication, quantum enhanced measurement and quantum computing. Linear optical quantum computing (LOQC) is a technology of particular interest - especially given that recent progress in on-chip waveguide technology removes the requirement for complex and costly bulk optics setups and state-of-the-art detectors have detection efficiencies of over 90%. Arguably the largest remaining technological hurdle for LOQC is the development of a suitable photon source. A suitable source would produce single, indistinguishable photons deterministically. Additionally, it would be beneficial if the generated photons were entangled, as this can significantly reduce the degree of multiplexing needed to implement LOQC. Quantum dots are a suitable candidate system for these photon sources as they exhibit bright single photon emission and can act as the interface between light and a trapped spin qubit. These properties have resulted in proposals to generate multi-photon entangled states suitable for use in LOQC. This thesis presents some of the progress we have made towards the creation of a suitable photon source. After introducing the background material, we demonstrate pulsed resonant excitation using a single-electron-charged quantum dot. Deterministic excitation is demonstrated by performing Rabi oscillations and Ramsey interference in the excitonic population. We also investigate Ramsey interference in a Faraday geometry magnetic field and observe a variety of beats and oscillations in the interferograms. We develop a model to explain our results and conclude that controlling the phase between the two Ramsey interference pulses allows a degree of control over the state of the trapped spin. We then also demonstrate the coherent optical manipulation of a trapped spin in a Voigt geometry magnetic field. Once we have presented the manipulation of the excitonic state and the state of the trapped spin, we proceed to investigate the properties of the light produced by the resonant excitation of a quantum dot. Hong Ou Mandel interference experiments allow us to probe the indistinguishability of the photons resulting from the resonant excitation of the negative trion transition. Repeating the measurement using light generated from a similar system (this time with a trapped hole rather than a trapped electron) that is embedded in a micropillar cavity, we find that the cavity enhancement of the transition results is higher indistinguishabilities. We make use of this bright source of indistinguishable photons to perform an on-chip quantum enhanced measurement and observe the phase superresolution associated with N00N states. In the final experimental chapter, we propose and implement a scheme to generate multi- qubit single photon states. We show that by repeatedly driving a micropillar-cavity-enhanced Raman transition of a single-hole-charged quantum dot in a Voigt geometry magnetic field it is possible to coherently superpose a photon across multiple time bins. The scheme is conceptually similar to proposed schemes for producing multi-photon entangled states. Lastly, we propose a scheme that makes use of the capabilities shown in the three experimental chapters to overcome several of the experimental difficulties associated with generating multi-photon entangled states.
|
4 |
InGaAs Quantum Dots Lasers by Varying the Composition of Cladding LayerYen, Chung-Wei 28 July 2010 (has links)
The purpose of this thesis is to fabricate the In0.75Ga0.25As quantum
dot (QD) lasers, and analyze the optical properties of laser devices to be
applied to optical fiber communication systems.
In laser materials, we grew 12-layer In0.75Ga0.25As QD strcutures by
molecular-beam epitaxy (MBE) with S-K mode on GaAs substrate, which
contains the cladding layer material Al0.5Ga0.5As (C433) Al0.25Ga0.75As
(C486) and Al0.2Ga0.8As (C485) of the three structures, the emission
wavelength of about 1.3£gm.
In the waveguide design, the design of 2.2£gm ridge width waveguide,
the purpose is to enable the single transmission mode in the waveguide,
so that smaller dispersion losses. Using ridge waveguide and cleaved
mirror as the formation of Fabry-Perot cavity laser.
In the quantum dot laser characteristic, C485 in the cavity length is
3000£gm of threshold current is 80mA with a slope efficiency of
41.88mW/A, the main emission Peak at 1201nm, the second Peak at
1197nm, the third Peak at 1182nm ; however C486 cavity length is
3300£gm of threshold current is 120mA with a slope efficiency of
27.44mW/A, the main emission Peak at 1215nm, the second Peak at
1205nm. C485 of the threshold current density is 1212 A/cm2, C486 of
the threshold current density is 1454 A/cm2.
|
5 |
Spectral multiplexing using quantum dot tagged microspheres with diffusing colloidal probe microscopyMuthukumar, Shankarapandian 15 May 2009 (has links)
This work involves the development of a new technique that integrates Diffusing
Colloidal Probe Microscopy (DCPM) and luminescence to simultaneously measure
multiple particle-wall interactions. DCPM can be used to map potential energy profiles of
multiple particle-surface interactions simultaneously and accurately. Colloidal
semiconductor quantum dots were used for spectral multiplexing to enable monitoring of
multiple analytes at the same time.
DCPM combines Total Internal Reflection Microscopy (TIRM) and Video
Microscopy to simultaneously measure multiple particle-surface interactions with
nanometer resolution in particle-surface separation. By acquiring the scattered intensity
emitted by the particles, the separation distance can be calculated and subsequently the
forces of interactions between the particle and the surface.
This work demonstrates the use of luminescence instead of scattering as the mode
of detection in DCPM. The luminescence is provided by quantum dots which are
incorporated into polystyrene microspheres. The unique optical properties of quantum
dots enable the creation of an optically multiplexed system where microspheres are
tagged by quantum dots of different emission wavelengths. Scattering in DCPM may result in erroneous calculation of the potential energy
profiles because of particle polydispersity. Since scattering is dependent on particle size,
luminescence is introduced into the system and some interesting results are obtained.
These results illustrate that the effect of particle polydispersity is significantly reduced
when luminescence is used as the mode of detection. This combined with the DCPM
system’s sensitivity would enable the monitoring of multiple functionalized particlesurface
interactions simultaneously and accurately.
|
6 |
ZnSe-based Epitaxial Growth on GaP Substrate by MOCVDYan-Yu, Chen 15 July 2002 (has links)
ABSTRACT
Recently, there has been an increasing interest in the fabrication and theory of self-assembled quantum dots (SAQD). Self-assembled quantum dots are of great interest because of good optical properties and device applications such as quantum dot lasers and memory device. The main merit of laser based on quantum dot is both the low threshold current density and low temperature sensitivite.
We can grow the ZnSe quantum dot on GaAs substrate. The maximum value of dots density is 1.3¡Ñ109cm-2 at 16.7 of ¢¾/¢º ratio. The dots densities are increasing by the flow rate of DEZn and H2Se. When the ¢¾/¢º ratio are lager than 16.7 or smaller than 7.5 will lead to quantum dots increasing. The blue shift is from 8 nm to 15 nm by quantum confinement.
The high quality of ZnS0.81Se0.19 epilayers on GaP substrate are grown with DEZn, H2Se, H2S and H2 fixed at 2.4 sccm, 10 sccm, 10 sccm and 1 slm respectively, and prepared at 340¢J and 50 min. High quality ZnS0.81Se0.19:N epilayer which was lattice-matched to GaP substrate has been prepared. The FWHM of X-ray diffraction was 720.2 arcsec. Its R-value was 5.20%. Then we grow ZnSe quantum dots / ZnS0.81Se0.19/GaP. The largest density of quantum dots is 1.1¡Ñ109 cm-2 at 30 s growth time.
|
7 |
Investigation of Quantum Dot Intermixing Technique To Modify Emission WavelengthHsu, De-chang 30 July 2008 (has links)
Abstract
We have applied PID and IFVP techniques to modify semiconductor bandgap in quantum well and quantum dot to achieve quantum well intermixing (QWI) and quantum dot intermixing (QDI). In quantum well intermixing experiment, we combine inductively coupled plasma reactive ion etching (ICP-RIE) and sputtering 300nm SiO2 to induce defects. And then, after high temperature annealing by RTA, we observed the results by using PL measurement. The samples used in this study were grown by molecular beam epitaxy(MBE) and consists of triple In0.53Ga0.47As/In0.53Ga0.26Al0.21As quantum wells. We used Ar+ bombardment on samples by ICP-RIE for 5 minutes, and then sputtered a 300nm SiO2 capping layer upon the samples. Finally the sample was annealed at 800¢J for 1 minutes. After the process, we got 150nm blue-shift (1575~1425nm) by measurement PL spectrum and applied XRD fitting to simulate 140nm blue-shift (1580~1440nm).On the same process step, we increased ICP-RIE bombardment time to 7 minutes thus we observed largest 269nm blue-shift from PL spectrum.
InAs/In0.52Al0.48As,In0.95Al0.05As/In0.52Al0.48As,and In0.95Ga0.05As/In0.52Al0.48As quantum dot structures were grown by MBE. In0.95Ga0.05As/In0.52Al0.48As quantum dot structure has larger blue-shift by sputtering 300nm SiO2 and annealing at high temperature by RTA. We got 282nm blue-shift annealing at 800¢J for In0.95Ga0.05As/In0.52Al0.48As quantum dot structure. Furthermore, we got largest 366nm blue-shift when we etched the thickness of capping layer and annealed at 800¢J.
|
8 |
The Fabrication and Measurement of Self-assembled InGaAs Quantum Dot ModulatorsKuo, Chao-yi 30 July 2009 (has links)
The purpose of this thesis is to fabricate the quantum dot waveguide and measure electro-optic (EO) modulation characteristics. We focus on the refractive index change (£Gn), phase retardation, and electro-optic coefficients for quantum dot samples. The £fg=1.3£gm InGaAs quantum dot structures were grown on n+ GaAs substrates by MBE.
We design a series of 2.2£gm straight and slope 7¢X single mode waveguide, and use the cleavage surface method to produce Fabry-Perot cavity. In fabrication process, we first defined the device pattern by using photo-lithography technique. Second, we etched ridge waveguide by using dry etching or multi-step wet etching method. Finally, we used the etching solution HBr:HCl:H2O2:H2O=5:4:1:70 to smooth the sidewall and reduce the scattering loss.
We analyzed the quantum dot EO properties by measuring phase retardation of Fabry-Perot resonance at different bias. From measuring the Fabry-Perot resonance at£f=1515nm TE-polarization, the linear electro-optic (LEO) and quadratic electro-optic (QEO) coefficients of C311 sample are 7.26¡Ñ10-12m/v and 1.14¡Ñ10-18m2/v2 , respectively. And the LEO and QEO coefficients of C251 sample are 2.99¡Ñ10-11m/v and 4.10¡Ñ10-17m2/v2, respectively. By coupling £f=1515nm TM-polarized light, we found the main influence of C251 sample is Kerr effect, and the QEO coefficient is 3.52¡Ñ10-17m2/v2. Both electro-optic coefficients are significantly larger than those measured in quantum wells and bulk GaAs. These results are applicable to QD-based low drive voltage and small size modulators.
|
9 |
Decoherence In Quantum Dot Charge Qubits: The Role Of Electromagnetic FluctuationsMcCracken, James 01 January 2006 (has links)
Lateral semiconductor quantum dot structures have been proposed as an effective quantum bit (qubit) for quantum computation. A single excess electron with the freedom to move between two capacitively coupled quantum dots creates a `pseudo'-spin system with the same qubit behavior as the more natural two level system of a single electron spin. The excess electron in the double dot system is restricted to one of the two dots, thereby creating two separate and distinct states (usually referred to as |L> and |R>). The benefit of these charge qubits lie in the relative ease with which they can be manipulated and created. Experiments have been performed in this area and have shown controllable coherent oscillations and thus efficient single-qubit operations. However, the decoherence rates observed in the experiments is still quite high, making double dot charge qubits not very appealing for large-scale implementations. The following work describes the effect of the electromagnetic (EM) environment of the double quantum dot system on the decoherence of the charge state. Sources of decoherence in similar systems have been extensively investigated before and this paper follows a close theoretical framework to previous work done in the area. The effect of the EM environment can been seen in the calculations discussed below, although it is clear that the decoherence seen in experiments cannot be fully explained by the voltage fluctuations as they are investigated here. The limitations of the calculations are discussed and improvements are suggested.
|
10 |
Conception de Quantum dots à base d’oxyde de zinc (ZnO) pour des applications en bio-imagerie de nanosystèmes lipidiques / Zinc oxide (ZnO) based quantum dots for bioimaging applications of lipid nanocarriersBerbel Manaia, Eloísa 25 May 2016 (has links)
Les systèmes théranostiques, consistant en un dispositif unique contenant des agents de diagnostic et des principes actifs, suscitent un interêt accru car ils peuvent améliorer le traitement de maladies telles que le cancer en réduisant les effets secondaires des médicaments et en permettant un suivi du traitement. L’objectif de ce travail était d’insérer des Quantum Dots (QDs) à base de ZnO dans des nanoparticules lipidiques pouvant délivrer un principe actif anti-cancéreux. Nous avons d’abord cherché à synthétiser des QDs présentant une structure coeur-coquille ZnO/ZnS pour améliorer leurs propriétés de luminescence. La spectroscopie d’absorption des rayons X, associée à des techniques usuelles de caractérisation, a permis de déterminer les conditions de synthèse conduisant à la formation d’une structure coeur-coquille. Néanmoins, l’émission dans le visible de ces QDs n’était pas satisfaisante. Des QDs dopés par des ions Mg ont donc été synthétisés. L’intensité de leur luminescence passe par un maximum pour une concentration molaire nominale d’ions Mg dans le milieu de réaction égale à 20%. Les QDs Zn0.8Mg0.2O présentent un rendement quantique (QY) six fois plus grand (QY ~64%) que celui des QDs de ZnO non dopés (QY ~ 10%). Les QDs dont la surface a été modifiée par de l’acide oléique (OA) forment une suspension colloidale stable dans le chloroforme et le toluène. Le rendement quantique des QDs OA-Zn0.8Mg0.2O était environ quatre fois plus élevé (Qy ~40%) que celui des QDs OA-ZnO. Les QDs Zn0.8Mg0.2O et OA-Zn0.8Mg0.2O ont été incorporés dans des nanoparticules lipidiques ayant un diamètre hydrodynamique moyen de l’ordre de 100- 220 nm. Les nanoparticules lipidiques solides (SLN) contenant des QDs sont restées stables dans différents milieux biologiques pendant trois heures à 37°C. Des mesures de fluorescence sur des suspensions de macrophages J774 ont montré une faible augmentation de l’intensité de l’émission visible pour les cellules incubées avec 2 mg/mL de SLNs luminescentes pendant 50 min, suggérant une internalisation partielle des nanoparticules par les macrophages. Malheureusement, ces résultats n’ont pas pu être confirmés par vidéo-microscopie et microscopie de fluorescence sur les cellules parce que les conditions expérimentales ( longueurs d’onde d’excitation et d’émission possibles) ne permettaient pas d’observer un signal supérieur à celui de l'auto-fluorescence des cellules. / Theranostic systems consist of a single device containing therapeutic and diagnosis agents and receive increased attention because these devices can improve the therapy of diseases such as cancer, decreasing the toxic side effects and permitting to monitor the treatment. The aim of this work was to develop theranostic systems consisting of lipid based nanocarriers containing ZnO based quantum dots (QDs) as luminescent probes, and allowing to encapsulate a model drug for cancer therapy. Firstly, the synthesis of ZnO/ZnS QDs was studied, aiming to achieve improved luminescent properties. In this step, X-Rays Absorption Spectroscopy, together with other usual characterization techniques, could identify the synthesis condition in which core-shell structures were formed. Nevertheless, the emission of ZnO/ZnS QDs in the visible range was not promising. Therefore, Mg-doped ZnO QDs were synthesized; their luminescence went through a maximum for a 20 mol% nominal concentration of Mg2+ ions in the reaction medium. Zn0.8Mg0.2O QDs presented quantum yield (QY) six times higher (QY = 64%) than undoped ones (QY = 10%). ZnO and Zn0.8Mg0.2O QDs capped by oleic acid (OA) were synthesized and formed stable colloidal dispersions in chloroform and toluene. The QY of OA-Zn0.8Mg0.2O was about 4 times (around 40%) higher than that of the OA-ZnO QDs. Zn0.8Mg0.2O QDs and OA-Zn0.8Mg0.2O QDs could be incorporated into lipid based nanocarriers of average hydrodynamic diameter around 100 – 220 nm. The luminescent solid lipid nanoparticles (SLN) were stable in different media at 37°C during 3 hours. The fluorescence study showed slightly enhanced emission of the J774 macrophage-like cells treated with 2 mg/mL of luminescent SLN during 50 min, suggesting partial internalization of the nanoparticles into the macrophages. However, the internalization studies using fluorescence video-microscopy and microscopy were not successful, because the equipment (wavelengths of excitation and emission) did not allow overcoming the cell auto-fluorescence phenomena.
|
Page generated in 0.0353 seconds