It was demonstrated for the first time that RAFT polymerizations of NIPAAm can be carried out directly in water at room temperature without photo initiator under UV radiation. Under these conditions, the controlled/living features could be proven for a large range of monomer/RAFT agent ratios. Moreover, even at a monomer conversion exceeding 80%, polymerization control (PDI<1.2) is maintained. It is also demonstrated that the RAFT polymerization of AA can be carried out without photo initiator in water at ambient temperature in the presence of TRITT at short wavelength. At these wavelengths, the controlled/ living characteristics is maintained even at a monomer to polymer conversions exceeding 80%. UV/Vis spectrometry was employed to monitor the functional group (-S(C=S)S-) changes of the employed trithiocarbonate RAFT agent S,S???-Bis(??,?????-dimethyl-acetic acid)-trithiocarbonate (TRITT) in aqueous solution when exposed to UV radiation. It is shown that the degradation pattern of TRITT alone as well as TRITT in the presence of NIPAAm deviate from each other. Surprisingly, it is found that TRITT completely decomposed at 254 nm while the addition of monomer prevented the decomposition of TRITT at the same wavelength. Nuclear magnetic resonance (NMR) techniques were applied to study the decomposition products of TRITT in solution without the addition of monomer. Methanol-d4 was selected as the solvent. In addition, high-resolution soft ionization mass spectrometry techniques were used to map the product species generated during UV radiation induced RAFT polymerizations of NIPAAm and AA in aqueous media, allowing for the tentative assignment of end groups. The NMR analysis suggests that the decomposition of TRITT in methanol-d4 under UV radiation has three cleavage patterns. These three cleavage patterns (described in the current thesis in detail) all occur at the ???S(C=S)S- group, which is the weakest structural unit in TRITT molecule. iii However, polymerization occurs prior to decomposition, if monomer is present. The mass spectrometric analysis suggests that the initial radicals result from the dissociation of TRITT, as well as monomer. Trithiocarbonate end group degradation leading to the formation of thiol terminated chains is also occurring. In the case of NIPAAm polymerization, a peak which may be associated with a cross termination product of the intermediate radical was observed under both 302 nm and 254 nm wavelength irradiation. Interestingly, this peak does not occur in AA polymerization at any wavelength (nor is it expected to form under conventional RAFT conditions and was not observed in previous mass spectrometry studies in thermal or ??-initiated polymerizations of NIPPAm with TRITT) and thus this assignment should be treated as very tentative only.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

Hydrogen sulfide (H2S) is an endogenously produced signaling gas involved in numerous cellular functions. At the appropriate concentration, exogenous administration of this gasotransmitter regulates vasodilation, promotes angiogenesis of endothelial cells, and generally exhibits beneficial effects as an anti-inflammatory and antioperoxidative agent. H2S is also capable of acting as a gaseous chemotherapeutic agent. Therefore, the therapeutic potential of exogenous delivery of H2S is vast. The delivery of H2S is complicated by its gaseous nature. Under physiologically relevant conditions, H2S is rapidly depleted from solution by oxidation and/or degassing. Therefore, direct exogenous delivery is difficult. To date, most studies have employed Na2S as a convenient H2S source. However, the rapid surge in H2S concentration upon Na2S dissolution followed by its rapid decline poorly mimics the sustained production of low concentrations of H2S that occurs in biological systems. We synthesized a library of S-aroylthiooximes (SATOs)—H2S-releasing compounds that more aptly mimic in vivo H2S concentrations. SATOs are synthesized via reaction of a S-aroylthiohydroxylamine and an aldehyde or ketone. SATOs release H2S in response to a thiol functionality. H2S release from SATOs could be controlled, with H2S release half-lives on the order of minutes to hours. SATO chemistry was utilized to prepare H2S-releasing polymers. Copolymers prepared using RAFT polymerization could be functionalized with SATOs with conversions > 99%, and these polymers released H2S on a similar timescale to our small molecule donors, confirming the viability of SATO formation as a post-polymerization modification strategy. SATO-functionalized polymer amphiphiles were prepared that self-assembled into micelles or vesicles based on their composition. H2S was released from these polymer assemblies more slowly than from the small molecules and statistical polymers. These H2S-releasing micelles were employed in in vitro cytotoxicity studies. H2S released from the micelles was found to be selectively toxic to human colon cancer cells compared with healthy fibroblasts. These polymeric micelle donors outperformed existing H2S donors in terms of their toxicity towards cancer cells. The observed enhanced toxicity was suspected to arise from the slow and sustained release of H2S from the micelles. / Ph. D. / Hydrogen sulfide (H2S) is biologically relevant gas involved in numerous cellular functions. At the appropriate concentration, administration of this gasotransmitter exhibits potentially beneficial effects in multiple biological systems. H2S is also capable of acting as a gaseous chemotherapeutic agent. Therefore, the therapeutic potential of H2S is vast. The delivery of H2S is complicated by its gaseous nature. Under physiologically relevant conditions, H2S is rapidly depleted from solution by oxidation and/or degassing. Therefore, direct external delivery is difficult. To date, most studies have employed used sulfide salds as a convenient H2S source. However, these poorly mimic the production of low concentrations of H2S that occurs in biological systems. We synthesized a library of S-aroylthiooximes (SATOs)—H2S-releasing molecules that more aptly mimic H2S concentrations in the body. SATOs can be triggered to release H2S by biologically relevant compounds. H2S release from SATOs could be controlled over minutes to hours. SATO chemistry was utilized to prepare H2S-releasing polymers. Copolymers were prepared using and functionalized with SATOs, and these polymers released H2S on a similar timescale to our small molecule donors. SATO-functionalized nanoparticles were also prepared. H2S was released from these nanoparticles assemblies more slowly than from the small molecules and polymers. H2S released from the micelles was found to be selectively toxic to human colon cancer cells compared with healthy cells. These nanoparticle donors outperformed existing H2S donors in terms of their toxicity towards cancer cells. The observed enhanced toxicity was suspected to arise from the slow and sustained release of H2S from the nanoparticles.

No description available.

Thesis (MSc (Chemistry and Polymer Science))--Stellenbosch University, 2008. / Reversible addition fragmentation chain transfer (RAFT)-mediated polymerization has emerged as a versatile method for preparing polymers with control over molecular weight and polydispersity. Inherent in its mechanism is the retention of the chain transfer agent, the RAFT agent, at the polymer chain ends. Typically RAFT agents are made up of two parts, the so called R (leaving) and Z (thiocarbonyl thio, stabilizing) groups. These are retained as the a-and the w-end groups of the final polymer, respectively. RAFT polymerization offers a ready method for preparing polymers with well defined end functionalities. The a-end functionality can easily be built into the R group. The Z group, however, is thermally unstable and can impart color and smell to the polymer. Hence, two new methods for Z end group removal were introduced. Both methods take advantage of the facile reaction between thiocarbonyl thio compounds and radicals. By matching the functionalities of the R group (a-end group) with that of the end modified w-chain end, both methods offer an easy route to accessing telechelic functional polymers. End functional polymers have many important uses in industry and in the biomedical field. An alcohol functional xanthate RAFT agent was synthesized and successfully used to conduct the RAFT-mediated polymerization of N-vinylpyrrolidone (NVP). Characterization by NMR and MALDI ToF MS confirmed that a-hydroxyl-w-xanthate-functional PVP was easily produced. In the first end group modification method radicals were generated as in atom transfer radical addition (ATRA). A hydroxyl functional a-haloester was used as the ATRA initiator with a Cu catalyst system. The alkyl radical produced by this ATRA initiator then replaced the Z group giving a telechelic hydroxyl functional polymer. NMR analysis showed that the thiocarbonyl thio end group was completely removed. The hydroxyl functionality was quantified by derivatizing with trichloro acetyl isocyanate and subsequent analysis by NMR. MALDI ToF MS analysis, however, was inconclusive. In the second method the thiocarbonyl thio end group was removed by simply heating the polymer with hydrogen peroxide, thereby replacing the Z group with a hydroxyl end group at the w-chain end, giving a telechelic functional polymer. The telechelic hydroxyl functional polymer was subsequently crosslinked with a trifunctional isocyanate to make a PVP hydrogel. This confirmed that the end-modified polymer was indeed telechelic. The swelling kinetics of this hydrogel were determined in water at 37 oC.