The thesis focuses on power analysis of modern cryptographic modules. The first part contains a brief introduction to the topic of the power side channel and basic methods of analyzes. The text describes the process of comparison of modules and a short description of devices found. In the practical part two modules has been selected for the implementation of the encryption algorithm AES-128. The first module was the chip card Gemalto .NET v2 and the second one was the Raspberry Pi. A workplace has been created for these modules which allowed to measure the power consumption of the algorithm AES. Differential Power Analysis has been made using the captured results. In its conclusion the work presents the results in tables and samples of source codes. Graphs were made from the results captured on the Raspberry Pi and from the results of the Differential Power Analysis.

This masters’s thesis is about quantify of energy losses in the solar system for heating of hot water by energy from photovoltaics. During the April in year 2014 will be realized a practical data collection on the real system. Then, based on these measurements, calculations will be performed.

This thesis deals with conception of info-portal controlled by Ethernet connection. The system is divided into three parts: web server, control electronics and flip-dot panel. The information to display is sent to or received from the web server. The info-portal is equiped by sensors for measurement of interior parameters (temperature, humidity and atmosferic pressure).

This thesis deals with door video phone on the platform Raspberry Pi. There is described the platform Raspberry Pi, Raspberry Pi Camera module, operating systems for Raspberry Pi and described installing and configuring the software. Next is described the concept and description of programs created for door video phone and design of additional modules.

This master’s thesis is focused on design and realisation of special security system for space and property protection. System is devided into two parts, transmitting and receiving. Transmitting part is formed by Raspberry Pi Model B+, motion sensor, webcam and USB LTE modem Huawei E398. Receiving part consists of computer with suitable application for communication with FTP server. Data transfer in mobile systems is described in the first part of this thesis, transmitting part is designed in the second part. There is one transmitting option chosen in the third part and there are also described applications of the transmitting part. The last part of this thesis is focused on the receiving part and its application.

This thesis deals with door video phone on the platform Raspberry Pi. There is described the platform Raspberry Pi, Raspberry Pi Camera module, operating systems for Raspberry Pi and described installing and configuring the software. Next is described the concept and description of programs created for door video phone and design of additional modules.

This Master's Thesis deals with the controlling of robotic car by Raspberry Pi and the ca- mera. Theoretical part describes individual steps of image processing and probabilistic plan- ning for searching path in the work space. In particular, algorithm RRT (Rapidly-exploring Random Tree) is discussed and the balanced bidirectional RRT is further introduced and used for nonholonomic planning in configuration space. Next chapter speaks about propo- sed solution and there is the accurate description of connection Raspberry Pi to the robotic car. Rest of the work provides look at implemetation details and evaluation. In the end, conclusion was given and some improvements were suggested.

This thesis deals with complete design and manufacturing of autonomous two wheeled self-balancing robot. The goal of this thesis is to maintain the robot in up-right position and to follow black line using camera. The robot is controlled using Raspberry Pi and driven by DC motors. This thesis includes the design and implementation of hardware and software parts. Subsequently there was created the dynamic model in Matlab/Simulink. Based on this model, the LQR and PID controller was designed.

This thesis is aimed to enable energy optimization of combined water heating system. The first part deals with the assessment of the general view of thermal solar systems with autonomic power from photovoltaics and description of a particular solar system for energy optimization. Then there is chosen the control system conception based on single-board computer Raspberry Pi, which is complemented by auxiliary measuring and controlling circuit. In the following chapters is described design and implementation of software for control system including web interface. The remote monitoring and controlling of solar heating system is the main purpose of web interface.

This thesis solves design of functional device that will be able to automatically positioning back view mirrors according to the positio of driver face. Measuring position of the face provides stereovision of two webacams. The device is based on a computer Raspberry Pi 2 with designed expansion board. The created prototype can follow set view int the mirror with accuracy up to 7 cm (horizontally up to 5cm) in level of rear corner of a car. The results of this project validate design of automatic positioning mirror and it can be basis for specific implementations of the device in car.