Aortic dissection is a detrimental disease with a high mortality. However, the mechanisms regulating the susceptibility to aortic dissection remain unknown. We hypothesize that endothelial oxidative stress due to the activation of the reactive oxygen species (ROS)-generating Nox2 enzyme may play an important role in the development of aortic dissection. To investigate this, we generated transgenic mice (C57BL/6J background) with endothelial specific over-expression of Nox2 (Nox2 Tg) under the control of a tie-2 promoter. Expression of the human Nox2 transgene was confirmed by qRT-PCR to be found only in endothelial cells (EC) isolated from transgenic mice, and not in Wt EC or vascular smooth muscle cells (VSMC) and macrophages isolated from either genotype. Wild-type (Wt) littermates and Nox2 Tg male mice (22-24 weeks old, n=11) were treated with saline or Ang II (1mg/kg/day) via subcutaneous mini-pump for 28 days. There was no significant difference in the pressor responses to Ang II between Wt and Nox2 Tg mice (Wt 121±7mmHg vs. Nox2-Tg 122±6mmHg). However, 5/11 Nox2 Tg mice developed aortic dissections compared to 0/11 Wt mice (P<0.05). Immunohistochemistry revealed significant increases in endothelial VCAM-1 expression, MMP activity and CD45+ inflammatory cell recruitment in the aortas of Nox2 Tg mice after 5 days of Ang II infusion. Inflammatory cell recruitment was confirmed by FACS analysis of cells from digested aortas (P<0.05). Explanted aortas from Nox2-Tg mice had significantly greater secreted pro-inflammatory cytokine, Cyclophilin A (CypA) both at baseline and after 5 days of Ang II infusion compared to Wt littermates. Compared to primary Wt EC and VSMC, Nox2-Tg primary EC, but not primary VSMC, had increased ROS production which was accompanied by increased endothelial CypA secretion and ERK1/2 activation. Furthermore, conditioned media from Nox2-Tg EC induced greater ERK1/2 phosphorylation compared to conditioned media from Wt controls. Knockdown of CypA from sEND.1 endothelial conditioned media by siRNA knockdown abolished VSMC Erk1/2 phosphorylation. In conclusion, we demonstrate for the first time that a specific increase in endothelial ROS through the over-expression of Nox2 was sufficient to induce aortic dissection in response to Ang II stimulation. Endothelial secreted CypA could be the signalling mechanism by which increased endothelial ROS regulates the inflammatory response and the susceptibility to aortic dissection.

Thesis (PhD (Chemistry and Polymer Science))--University of Stellenbosch, 2010. / Electrochemical behaviour of Ce, Fe, Cr,V and Mn in the presence of DTPA, EDTA, EDDS, NTA ligands were investigated by using cyclic voltammetry, a rotating disc electrode and electrochemical impedance spectroscopy for use in redox flow battery (RFB) systems. RFB is currently used for energy storage, the vanadium, which is used in most of the RFB’s, however suffers from species crossover and sluggish reactions, which limit the lifetime of the battery. These various ligands and metal complexes mentioned above where all examined to identify the suitable and favoured electrolyte that can be used for a RFB system. Kinetic parameters such as potential, limiting current, transfer coefficient, diffusion coefficients, and rate constants were studied. RDE experiments confirmed that the parameters measured by CV are similar under hydrodynamic conditions and can be used to determine the kinetic parameters of the redox couples. The use of DTPA as a ligand for complexation of Ce(IV) gave more favourable results compared to other ligand with various metal complexes used in this study [1-3]. The results of kinetic studies of Ce(IV)–DTPA complex shows promise as an electrolyte for a redox flow battery. The separation of V(IV)/(V), Fe (III)/(IV),Cr(III)/(IV),Mn (III)/(IV) and Ce(III)/(IV) with various ligands (EDTA, EDDS, NTA and DTPA) were also investigated using capillary electrophoresis. To understand the speciation of these metal complexes as used in this study and particularly the vanadium, for the reason that it has a complicated (V) oxidation state. The charge/discharge performance of all electrolytes used in this work was determined and a high voltage achieved when Ce-DTPA was used, and it is compared to that of the vanadium electrolyte currently in use. This was evaluated with systems studied previously. Therefore, Ce-DTPA will be a suitable electrolyte for redox flow battery systems.

Tuberculosis (TB) affects nearly a third of the world’s population and has been termed a ‘Global Emergency’ by the WHO. The emergence of multi/extensively drug resistant (M/XDR) strains of Mycobacterium tuberculosis (Mtb), the causative agent of TB, and the increasing incidences of azole drug resistant sterol demethylases (CYP51) from pathogenic fungi has propelled studies to understand mechanisms of azole drug resistance on the drug target CYP51. Since Mtb is devoid of a sterol biosynthetic pathway, the presence and study of CYP51B1 and 19 other Cytochrome P450s in its genome is important to clarify host-pathogen mechanism of infection and the potential of using azole drugs to treat TB. In this study, CYP51B1 from Mtb was used as the model enzyme to study CYP51 mutants from Candida albicans fluconazole-resistant clinical strains. By protein engineering methods, F89H, L100F, S348F, G388S and R391K CYP51B1 mutants were made and azole drug binding properties were investigated using stopped-flow kinetics and static equilibrium methods. Dissociation constant (Kd) values were derived for a range of commercially available azole drugs by fitting the equilibrium binding data to a hyperbolic equation. Kd values for stopped-flow kinetics were derived by plotting observed binding rates (kobs) across different azole drug concentrations against time, followed by fitting multiple kobs data to a linear equation to derive azole drug de-binding (koff) and binding (kon) rate constants – the Kd was obtained by koff/kon. Extinction coefficient for heme b content in mutants and Wild Type (WT) CYP51B1 were an average of ɛ419 = 96.1 mM-1 cm-1. Biochemical characterisation of the mutants were carried out using established experiments on CYP51 – reduction of Fe(III)-heme to Fe(II)-heme, NO binding to Fe(III)-heme, rates of CO-Fe(II) adduct formation and rates of collapse of the P450 to P420 species in the presence of CO and estriol with redox partners from Mtb. In order to elucidate the effects of the above mutations on the iron-heme catalytic region, electron paramagnetic resonance (EPR) experiments were carried out with and without azole drugs. Circular dichroism (CD), differential scanning calorimetry (DSC) and multi-angled laser light scattering (MALLS) analysis confirmed that F89H, R391K and L100F mutants were stable and homogeneous. Crystallogenesis was successful for the above mentioned mutants and atomic structures were obtained for all mutants and WT CYP51B1 (in ligand-bound and substrate-free forms), except for S348F and G388S mutants which were expressed as inclusion bodies and 60% holoenzyme, respectively. Reconstituted catalytic assays to determine the sterol demethylating propensity of the mutants were carried out using redox partners from Mtb or E. coli, and with lanosterol and dihydrolanosterol as the surrogate substrates. Redox potentiometry showed similar potentials to WT for all mutants except for the G388S mutant which was relatively positive (–102 mV). Redox cycling experiments followed by EPR analysis for mutants and WT resulted in a novel P450 high-spin species at g value 5.84 (80 %) which gradually collapsed to the initial low spin state over 48 h. Expression trials were concurrently carried out on two other Mtb P450 genes – CYP123 (Rv0744c) and CYP136 (Rv3059) products of which may have similar functions to CYP51B1 or may share similar redox partners. CYP123 is located on the same operon as CYP51B1 while CYP136 has a 29% sequence identity to another CYP51 from a marine slime bacterium. Although further work is necessary, in this study CYP123 was expressed totally as inclusion bodies while CYP136 was expressed as soluble apoprotein fused with trigger factor chaperone.

It is important to optimize glass compositions for their specific purpose but also for the efficiency of the production process, the manufacturing of glass. This will be beneficial economically and environmentally. Today many processes and glass compositions are already optimized, but due to more strict legislation on toxic elements and substances there must be changes in many glass compositions. One of these elements is antimony; the oxide is used as fining agent to obtain a bubble free glass within a reasonable process time. One aim with this thesis is to obtain a deeper understanding of the fining mechanism in 20R2O-10MO-70SiO2 (R=Na and/or K, M = Ca and/or Ba, Mg, Sr) glasses in order to minimise the amount of Sb2O3. Another intention is to study the structure of 20R2O-10CaO-70SiO2 (R = Na, K) with Cu2+ as probe ion and thus get a deeper knowledge of the surrounding glass matrix.  The optical basicity scale is used to determine the acid/base character of the different glass compositions.   Fining efficiency results showed a remarkable increase of the number of remaining bubbles when the glass contains either approximately equal amounts of Na and K or Ca and Ba, Mg or Sr. The much higher number of bubbles in the potassium containing glasses compared to the sodium containing is explained by the increase in viscosity, the increase in optical basicity and thus lower oxygen activity. The differences in the fining efficiency when altering alkaline earth ions cannot be explained by the optical basicity values, it seems to be a more complicated situation.   This thesis also reports maximum in Vickers hardness and packing density as well as minimum in glass transition temperature for the mixed alkali glasses. The mixed alkaline earth glasses do not exhibit any clear nonlinear behaviour. Raman spectroscopy measurements showed a variation in the network connectivity which has a clear relation to the optical basicity of the different glass compositions. The combination of UV-Vis-NIR and X-ray absorption spectroscopy measurements showed that the coordination sphere for Cu(II) is a tetragonal distorted octahedron with two elongated Cu-O bonds along the z axis. There were no trends in the degree of tetragonal distortion, thus it was about the same for all the investigated glass compositions. Cu(I) is found to be coordinated by two oxygen ligands in mainly linear coordination sphere, evidenced from X-ray absorption spectroscopy.

A new sensor technology based on optical diffraction of visible light shows promise for sensing metal ions and other species that employ chemically-responsive metal oxide and conducting polymer grating elements. These materials undergo reversible redox processes upon interaction with a chemical analyte that subsequently induces changes in the materials refractive index. The two key design parameters of this sensing technique involve preparation of micropatterned sensor elements and the evaluation of appropriate wavelengths for detection of diffracted light. Much of the ability to “tune” a desired sensing response is dictated by the understanding of how factors of size, dimension, crystallinity, morphology, porosity, and heterogeneity influence analyte/sensor interactions (i.e., adsorption, binding, and transport). The effect of composition, structure, and morphology of MoO₃, WO₃, Moₓ W₁₋ₓO₃, IrOₓ and polyaniline grating materials on chemical, electrochemical and optical properties of these systems will be examined by a range of spectroscopic and electrochemical techniques. Comprehensive evaluation and correlation of materials’ optical properties to diffraction-based detection will advance understanding of the capabilities and limitations for the diffraction-based sensing methodology. This information can then used to determine optimal sensing parameters to improve detection limits, enhance sensitivity and increase the dynamic range for detection of model analytes. / text

The Arabidopsis HSP101 protein belongs to the Hsp100/ClpB family of AAA+ proteins (ATPases Associated with various cellular Activities). This family of proteins, in collaboration with the Hsp70 chaperone system, has the remarkable ability to solubilize protein aggregates and refold proteins back to their native forms. Thus, their chaperone activity is necessary for acquired thermotolerance in organisms as diverse as bacteria and plants. My dissertation project focused on understanding the mechanism of HSP101 action using Arabidopsis thaliana as a model system. The first approach used genetics to screen for suppressors of a specific missense mutant allele of HSP101, hot1-4, in order to find interacting cofactor proteins or key substrates of HSP101, or other processes involved in thermotolerance. Four extragenic suppressors that can overcome the heat-hypersensitive phenotype caused by the hot1-4 mutation were isolated and one of them (shot1) was identified as a mutation in a mitochondrion-targeted protein. Although shot1 mutations do not directly interfere with HSP101 function, they reveal independent mechanisms required for thermotolerance, which involve reduced oxidative stress. The second approach used to investigate HSP101 function was to affinity-purify HSP101 and identify associated proteins. For this purpose, transgenic Arabidopsis plants were generated expressing affinity-tagged wild-type and mutant variants of HSP101. As predicted, cytosolic Hsp70s were identified as an interacting partner of HSP101. Surprisingly, 26S proteasome regulatory subunits were also identified, suggesting a possible link between the protein degradation and reactivation pathways. Further experiments were also undertaken to define the importance of different domains of HSP101, as well as the localization of HSP101. Transgenic Arabidopsis plants expressing N- or C-terminally truncated HSP101 indicate that the N-terminal domain of HSP101 is required for full activity in protecting plants from heat stress. However, in contrast to the yeast ortholog, Hsp104, the C-terminal extension of HSP101 was found to be completely dispensable for thermotolerance of Arabidopsis. Additional transgenic plants expressing an HSP101-GFP were also characterized. Initial microscopic analysis confirms nuclear/cytoplasmic localization as has been reported previously for yeast Hsp104. However, the dynamics of subcellular redistribution upon heat stress need to be further investigated to fully understand the potential significance of the observed localization.

No description available.

This thesis presents electronic structure calculations on problems related to the bonding in inorganic coordination compounds and clusters. A wide range of molecules with the ability to exist in different structural forms or electronic states has been selected and density functional theory is systematically applied in order to gain detailed insight into their characteristics and reactivity at the electronic level. First, we address the question of redox non-innocent behaviour of bipyridine in a series of 1st row transition metal complexes. Complexes of the type [M(2,2'-bipyridine)(mes)₂]⁰ (M = Cr, Mn, Fe, Co, Ni; mes = 2,4,6-Me₃C6H₂) and their one-electron reduced forms have been explored. The results clearly show that the anions are best described as complexes of the monoanionic bipyridine radical (S_bpy = 1/2), giving a rationale for the observed structural changes within the ligand. Likewise, we have identified dianionic bipyridine in both the complexes [Zn2(4,4'-bpy)(mes)₄]²⁻ and [Fe(2,2'-bpy)₂]²⁻. In no case have we found evidence for significant metal-to-ligand backbonding. The subject of redox-noninnocence is further revisited in a comparative study of the two complexes [M(o-Clpap)₃] (M = Cr, Mo; o-Clpap = 2-[(2-chloro-phenyl)azo]-pyridine), and their associated electron transfer series. The results indicate that all electron transfer processes are primarily ligand-based, although in the case of the Mo analogue these are coupled to substantial electron density changes at the metal. The ability of pap to form radical anions finds a contrasting case in the di- nuclear Rh complex [Rh₂(μ-p-Clpap)₂ (cod)Cl₂], where the two ligand bridges act as acceptors of strong dπ∗ backbonding from a formally Rh^–I centre. We then direct our attention to the endohedral Zintl clusters [Fe@Ge₁₀]³⁻ and [Mn@Pb₁₂]³⁻, which reveal peculiar topologies. We have probed the electronic factors that influence their geometric preferences, and propose a model based on the shift of electron density from the endo- hedral metal to the cage to account for the observed geometries. Subsequently, we reassess the electronic structure of the xenophilic clusters Mn₂(thf)₄(Fe(CO)₄)₂ and [Mn(Mn(thf)₂)₃(Mn(CO)₄)₃]^–. We conclude that these are best viewed as exchange coupled Mn^II centres bridged by closed- shell carbonylate fragments. In the closing chapter the reduction of NO₂^– to NO by the complex [Cu(tct)(NO₂)]⁺ (tct = cis,cis-1,3,5-tris(cinnamylideneamino)cyclohexane) is studied, a process that mimics the enzyme-catalysed reaction. Two viable pathways for the reaction have been traced and key inter-mediates identified. Both direct release of NO or via decomposition of a Cu-NO complex are kinetically and thermodynamically feasible.

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

The long-term outdoor durability of dye-sensitized solar cells (DSSCs) is still a challenging issue for the large-scale commercial application of this promising photovoltaic technique. In order to study the degradation mechanism of DSSCs, ageing tests under selected accelerating conditions were carried out. The electrolyte is a crucial component of the device. The interactions between the electrolyte and other device components were unraveled during the ageing test, and this is the focus of this thesis. The dynamics and the underlying effects of these interactions on the DSSC performance were studied. Co(bpy)32+/3+-mediated solar cells sensitized by triphenylamine-based organic dyes are systems of main interest. The changes with respect to the configuration of both labile Co(bpy)32+ and apparently inert Co(bpy)33+ redox complexes under different ageing conditions have been characterized, emphasizing the ligand exchange problem due to the addition of Lewis-base-type electrolyte additives and the unavoidable presence of oxygen. Both beneficial and adverse effects on the DSSC performance have been separately discussed in the short-term and long-term ageing tests. The stability of dye molecules adsorbed on the TiO2 surface and dissolved in the electrolyte has been studied by monitoring the spectral change of the dye, revealing the crucial effect of cation-based additives and the cation-dependent stability of the device photovoltage. The dye/TiO2 interfacial electron transfer kinetics were compared for the bithiophene-linked dyes before and after ageing in the presence of Lewis base additives; the observed change being related to the light-promoted and Lewis-base-assisted performance enhancement. The effect of electrolyte co-additives on passivating the counter electrode was also observed. The final chapter shows the effect of electrolyte composition on the electrolyte diffusion limitation from the perspectives of cation additive options, cation concentration and solvent additives respectively. Based on a comprehensive analysis, suggestions have been made regarding lithium-ion-free and polymer-in-salt strategies, and also regarding cobalt complex degradation and the crucial role of Lewis base additives. The fundamental studies contribute to the understanding of DSSC chemistry and provide a guideline towards achieving efficient and stable DSSCs. / <p>QC 20160517</p>