With higher frequencies now being used in RFID systems, antennas are becoming much smaller resulting in more space on tags that can be used for innovative array designs to harvest more wireless energy. This master's thesis outlines and details a new methodology for designing and simulating the staggered pattern charge collector, a technique to improve harvesting wireless energy. Staggered pattern charge collectors enable RFID tag's to produce a higher DC voltage from a charge pump circuit by creatively using multiple arrays to increase the antenna power conversion gain without limiting the half power beamwidth. This thesis discusses the basics of patch antennas and charge pumps as well as an optimization technique for the staggered pattern array by maximizing integrated power conversion gain (IPCG). An example of a staggered pattern charge collector is fully specified from design through simulation, in preparation for fabrication. This methodology allows for the staggered pattern charge collectors to be designed, simulated, and fabricated quickly and effectively.

Dans le domaine de la chaîne logistique, nous constatons des besoins croissants d'information et d'interactions entre produits, processus et clients, et ceci durant le cycle de vie du produit. Cela entraîne le besoin, au niveau du produit, de nouvelles capacités de communication, de gestion de l'information, de perception et d'action avec son environnement physique. Ces besoins ont engendré le concept de produit ou objet communicant. Un produit avec ces nouvelles capacités pourra interagir avec d'autres entités physiques ou informationnelles dans son environnement et apporter des transformations significatives sur la gestion de la chaîne logistique. Le travail présenté dans cette thèse vise à analyser et contribuer à appliquer la notion d'objet communicant aux produits physiques dans le domaine de la chaîne logistique. L'approche proposée considère un produit comme un demandeur ou un fournisseur de services. La méthodologie proposée de gestion des produits communicants s'appuie sur la caractérisation d'une architecture de services ambiants devant permettre de gérer les services d'un produit d'une façon automatique et ubiquiste. Nous avons choisi l'architecture UPnP pour gérer les services des objets communicants. La communication directe avec le produit est supportée par les méthodes d'identification automatique RFID. Nous nous sommes appuyés sur le formalisme standard de modélisation UML afin de modéliser les interactions et les services associés à un produit physique. Comme résultat, nous avons élaboreé des démonstrateurs de laboratoire validant la faisabilité de notre proposition méthodologique de gestion de la chaîne logistique par les objets communicants.

No description available.

No description available.

The Internet of Things paradigm establishes interaction and communication with a huge amount of actors. The concept is not a new-from-scratch one; actually, it combines a vast number of technologies and protocols and surely adaptations of pre-existing elements to offer new services and applications. One of the key technologies of the Internet of Things is the Radio Frequency Identification just abbreviated RFID. This technology proposes a set of solutions that allow tracking and tracing persons, animals and practically any item wirelessly. Considering the Internet of Things concept, multiple technologies need to be linked in order to provide interactions that lead to the implementation of services and applications. The challenge is that these technologies are not necessarily compatible and designed to work with other technologies. Within this context, the main objective of this thesis is to design a heterogeneous framework that will permit the interaction of diverse devices such as RFID, sensors and actuators in order to provide new applications and services. For this purpose in this work, our first contribution is the design and analysis of an integration architecture for heterogeneous devices. In the second contribution, we propose an evaluation model for RFID topologies and an optimization tool that assists in the RFID network planning process. Finally, in our last contribution, we implemented a simplified version of the framework by using embedded hardware and performance metrics are provided as well as the detailed configuration of the test platform

檔案是產生者因其業務活動而產生，視該文件所具有的重要價值、稽憑價值與特殊價值等而被留存於各機關庫房內，當保存期限屆滿時，再將其移轉至適當的檔案典藏單位中典藏，並賦予法律、文化和研究等功用，讓社會大眾加以應用。因此檔案典藏單位是蒐集、整理、儲存與提供檔案資訊之處所，以妥善典藏檔案，並維護檔案安全為主要目的。其中庫房則是檔案典藏單位的中樞命脈。為能達到有效運用人力資源、減少找尋檔案所耗費的時間、即時掌握檔案動態、加速庫房清查等效能，檔案典藏單位可採取無線射頻識別(Radio Frequency Identification, RFID)協助管理工作。 本研究之目的主要分析檔案典藏單位與圖書館兩者於應用RFID之異同及探究國內檔案典藏單位運用RFID之可行性，以提出RFID應用於檔案典藏單位庫房管理之建議。本研究採用「深度訪談法」，主要訪談六所建置單位，以瞭解建置動機、使用成效及建置單位對RFID的看法等。並訪談五間檔案典藏單位對RFID應用之看法。 根據訪談結果，提出結論如下：一、圖書館運用RFID情形：RFID建置之初多以資訊背景人員為負責人，以提供多元服務予讀者為主要目的，且承辦RFID單位名稱多元化，使用時認為RFID於流通成效最佳，手持式讀寫器之成效則有待改善；二、檔案典藏單位庫房管理現況及RFID導入之可行性：研究結果發現金屬檔案架對RFID會產生干擾，且檔案典藏單位經費緊縮、需求性不如圖書館、政府推動電子化公文，無紙化世界即將來臨，將導致載體改變，會影響RFID應用。 由研究結果針對RFID應用於檔案典藏單位庫房管理可行性之研究歸納檔案使用率(utility rate)、館藏數量、庫房管理及撥用經費等四部分建議：一、建議優先使用RFID於檔案使用頻率較高的單位；二、建議優先使用RFID於館藏量較大的典藏單位；三、將RFID控管溫濕度功能應用至庫房管理；四、撥用經費建置RFID於部分檔案。 / Records are created in the process of executing various tasks and activities, whose intrinsic, evidential and special value is used to determine if such items require archiving. Upon expiration of records from these archives, subsequent appraisal and transfer to more suitable public archives allows society to use these records in legal, cultural, or research studies and fields, and also for other future uses. Thus, an archival repository is the ideal entity for the acquisition, organization, storage, and public access supplier for records, as well as serving a primary purpose of maintaining both a proper storage location and the security and preservation of records. Among the various responsibilities in an archival institute, storage is the most important aspect. In order to most efficiently utilize human resources and costs associated with searching and moving records, as well as to reduce collection inventory times, archival repositories can utilize RFID technology to aid in their administration responsibilities. This study analyzes and compares similarities and differences between RFID in archives and libraries, and also investigates RFID feasibility, and makes appropriate recommendations for RFID usage, applications, administration and usage models in archival repository management. This study used in-depth interviews, six from libraries, compiling their factors for RFID usage, results with the technology, and opinions regarding this new technology. In addition, five archives were interviewed regarding RFID applications and opinions. Based on these interviews, it can be concluded: First, in libraries, initial deployment of this technology used employees well-versed in information technology fields, RFID enables provision of multiple new user services, implementing department titles varied from place to place, circulation departments benefitted the most from RFID usage, and RFID handheld reader usage needs improved methods and results. Second, regarding current RFID usage in an archives institution, RFID usage in metal storage shelves has shown signal interference, RFID faces significantly higher cost barriers, funding issues show RFID is better suited for library usage models, government is shifting towards e-documents, and a global information paradigm shift from a physical paper medium to a paperless medium, will effect RFID applications. From these conclusions, four recommendations arise regarding the utilization rate of RFID, quantity of departments, storage administration, and sufficient funding: 1. RFID is more suitable in higher usage archival institutions. 2. RFID is more suitable in repositories with larger quantities of records. 3. RFID temperature and humidity features can be enabled for greater control and management in storage administration. 4. Sufficient funds must be allocated to implement RFID for important records.

Sewer and oil pipeline spillage issues have become major causes of pollution in urban and rural areas usually caused by blockages in the water storage and drainage system, and oil spillage of underground oil pipelines. An effective way of avoiding this problem will be by deploying some mechanism to monitor these installations at each point in time and reporting unusual liquid activity to the relevant authorities for prompt action to avoid a flooding or spillage occurrence. This research work presents a low cost energy efficient liquid level monitoring technique using Radio Frequency Identification Technology. Passive UHF RFID tags have been designed, modelled and optimized. A simple rectangular tag, the P-shaped tag and S-shaped tag with UHF band frequency of operation (850-950 MHz) has been designed and modelled. Detailed parametric analysis of the rectangular tag is made and the optimised design results analysed and presented in HFSS and Matlab. The optimised rectangular tag designs are then deployed as level sensors in a gully pot. Identical tags were deployed to detect 4 distinct levels in alternate positions and a few inches in seperation distance within the gully pot height (Low, Mid, High and Ultra high). The radiation characteristic of tag sensors in deployment as modelled on HFSS is observed to show consistent performance with application requirements. An in-manhole chamber antenna for an underground communication system is analysed, designed, deployed and measured. The antenna covers dual-band impedance bandwidths (i.e. 824 to 960 MHz, and 1710 to 2170 MHz). The results show that the antenna prototype exhibits sufficient impedance bandwidth, suitable radiation characteristics, and adequate gains for the required underground wireless sensor applications. Finally, a Linearly Shifted Quadrifilar Helical Antenna (LSQHA) designed using Genetic Algorithm optimisation technique for adoption as an RFID reader antenna is proposed and investigated. The new antenna confirms coverage of the RFID bandwidth 860-960 MHz with acceptable power gain of 13.1 dBi.

Made available in DSpace on 2016-06-02T19:05:17Z (GMT). No. of bitstreams: 1 DissRPBM.pdf: 1011856 bytes, checksum: 715ebb8b484f0962fc766a3efbebb601 (MD5) Previous issue date: 2006-05-31 / Financiadora de Estudos e Projetos / EPCGlobal communication protocol for RFID (Radio Frequency Identification) does not ensure security and privacy for its system users. This fact makes possible several kinds of security problems on RFID technology usage justifying that security mechanisms should be added to communication protocol preserving the existing standards. This work proposal is based on communication authentication usage making use of low-cost cryptography with the TEA algorithm. The proposed mutual authentication mechanism was specified and proved using BAN logic. All protocol specification has considered the EPCGlobal standard for Class 1 tags as base adding security and privacy extensions to data communication to get protection against several attacks. The results from this work include an authentication protocol formal specification with cryptography allowing this way the protocol standardization using as base the current Class 1 protocol. / O protocolo de comunicação para a Identificação por Radiofreqüência (RFID- Radio Frequency Identification), definido como padrão pela EPCGlobal, não oferece mecanismos para a garantia de segurança e privacidade aos usuários do sistema. Esta característica possibilita a presença de diversos tipos de problemas no emprego da tecnologia justificando que novos mecanismos de segurança sejam incorporados diretamente ao protocolo de comunicação, preservando os padrões existentes. A proposta deste trabalho baseia-se na utilização de autenticação da comunicação com emprego de criptografia de baixo custo utilizando o algoritmo TEA. O mecanismo de autenticação mútua proposto foi especificado e validado com lógica BAN. Toda a especificação do protocolo considerou o padrão EPCGlobal para tags Classe 1 como base, adicionando extensões visando combater as possibilidades de ataques relacionados à segurança e privacidade na comunicação dos dados. Os resultados obtidos com este trabalho incluem a especificação formal de um protocolo de autenticação com criptografia, permitindo a padronização deste protocolo baseado no padrão para tags Classe 1 e preservando a especificação padrão base.

Submitted by Viviane Lima da Cunha (viviane@biblioteca.ufpb.br) on 2016-02-05T15:54:58Z No. of bitstreams: 1 arquivototal.pdf: 4833402 bytes, checksum: 88ffcf3db8082fc50d986d744b72fd34 (MD5) / Made available in DSpace on 2016-02-05T15:54:58Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 4833402 bytes, checksum: 88ffcf3db8082fc50d986d744b72fd34 (MD5) Previous issue date: 2013-02-25 / The use of Wireless Sensor Networks (WSN) has been widespread in many areas of research and application. The purpose of this work is a study on how to use sensors to monitor people on the move, having a WSN as a way in which the search will occur, but in order to predict the formation of groups in certain regions. For this work the network was designed and tested in the simulator Ptolemy II, using the ZigBee Communication protocol, where the sensors were positioned according to a Cartesian coordinate system. The WSN will detect people and identify common patterns of movement, such as speed, direction and type of movement, using parameters set in the simulator. People involved in the groups will be identified by RFID (Radio Frequency Identification) attached to his body. The movement of the crowd had its mathematical formalization based on parameters such as position of the group, number of people per group and duration of movement that define the characteristics necessary to simulate this scenario. From the formalization of the movement of the crowd, many data are collected at predetermined time intervals and interpreted by an algorithm, through the exchange of messages between sensors, estimates the crowd forming in the region defined as the target. In this work, were inserted charts and graphs that reflect the actual number of people moving towards the real target. These data are generated from the intense exchange of messages between sensors, obeying some parameters that favor established and the algorithm that estimates the crowd at the target formation at any given time. The accuracy of the prediction was measured by the amount of alarms issued that estimate and the formation of agglomerations of people in a given region. Thus, the identification of individuals by sensors is interpreted according to the possibility of formation of groups and their values disseminated by the network. The proposal is that this action will facilitate the process of decision making and thus help to characterize the formation of crowds. / O uso das Redes de Sensores sem Fio (RSSF) tem sido difundido em diversas áreas de pesquisa e aplicação. A proposta deste trabalho é um estudo sobre como utilizar sensores para monitorar pessoas em movimento, tendo uma RSSF como meio no qual a pesquisa deverá ocorrer, porém com o intuito de prever a formação de grupos em determinadas regiões. Para a realização deste trabalho a rede foi projetada e testada no simulador Ptolemy II, usando o protocolo ZigBee de comunicação, e os sensores foram posicionados de acordo com um sistema de coordenadas cartesianas. A RSSF deverá detectar as pessoas e identificar características comuns de movimento, como velocidade, direção e tipo de movimento, por meio de parâmetros configurados no simulador. As pessoas envolvidas nos grupos serão identificadas por etiquetas RFID (Radio Frequency Identification) presas ao seu corpo. O movimento de multidão teve sua formalização matemática baseada em parâmetros como posição do grupo, quantidade de pessoas por grupo e duração do movimento, que definem as características necessárias para a simulação desse cenário. A partir da formalização do movimento da multidão, vários dados foram coletados em intervalos de tempo previamente determinados e interpretados por um algoritmo que, por meio da troca de mensagens entre sensores, estima a formação de multidão na região definida como alvo. Neste trabalho, foram inseridos tabelas e gráficos que refletem o número real de pessoas que se deslocam em direção ao alvo real. Esses dados foram gerados a partir da intensa troca de mensagens entre os sensores, obedecendo alguns parâmetros estabelecidos e que favorecem o algoritmo que estima a formação de multidão no alvo, em determinado tempo. A acurácia da previsão foi medida pela quantidade de alarmes emitidos e que estimam a formação de aglomerações de pessoas em determinada região. Assim, a detecção de pessoas pelos sensores é interpretada de acordo com a possibilidade de formação de grupos, tendo seus valores disseminados pela rede. A proposta é que essa ação facilite o processo de tomada de decisão e, consequentemente, ajude na caracterização da formação de multidões

dreimal im Jahr erscheinende Zeitschrift über aktuelle Themen der TU Chemnitz