Spelling suggestions: "subject:"ccs"" "subject:"cscs""
11 |
Performances des applications IP dans les systèmes de communications par satellite : cas du DVB-RCS et du DVB-S2 / Performance of IP applications over satellite communication systems : case study of DVB-RCS and DVB-S2Jegham, Nizar 12 November 2008 (has links)
Les retours et les études dont on dispose sur les réseaux IP par satellite ne permettent pas d’apprécier les performances dont ils sont capables. Pourtant, les difficultés de transmettre de l’IP par satellite persistent encore. L’inadaptation du protocole IP, initialement conçu pour des réseaux terrestres, au large produit délai-bande du média satellite est une raison. Le fonctionnement souvent dé-corrélé entre les niveaux supérieurs de la pile TCP/IP et les couches physique et MAC du média satellite, est une autre. Dans le cadre de ce travail de thèse nous adoptons une démarche expérimentale basée sur l’observation, l’analyse et l’évaluation de systèmes implantant des technologies IP par satellite tels que le standard DVB-RCS, la technologie propriétaire iDirect ou la nouvelle norme DVB-S2. Nous étudions l’impact des règles de qualité de service IP sur les performances des applications dans un contexte de bande limitée. Nous nous penchons notamment sur l’évaluation des efficacités de l’encapsulation IP en termes de consommation de bande. Notre premier objectif est de déceler les niveaux auxquels un opérateur peut agir en vue d’optimiser la configuration d’un système IP par satellite et en accroître les performances / Despite of a number of IP satellite networks developed and deployed, only a limited number of studies and feedbacks about the performance is available. IP over satellite systems raises several constraints. One of the main reasons is the lack of adaptation of IP protocol, initially designed for terrestrial wired networks, to the large bandwidth delay product of the satellite media. Another reason is a lack of coordination between the IP protocol stack upper layer and the satellite MAC and physical layer. The purpose of this PhD study is to evaluate and assess the behaviour of IP applications when conveyed over satellite systems. We mainly focus on the IP quality of service performance, bandwidth encapsulation efficiency as well as IP applications metrics. Through the observation, we try to find how it’s possible to modify the IP satellite systems configuration in order to improve IP applications performance. We also suggest some ideas about the way to refine these technologies with regards to the design aspects. Experimentations have been performed over test beds implementing both standardised satellite technologies such as DVB-RCS as well as proprietary systems such as iDirect in addition to the new normalised technology DVB-S2
|
12 |
Architectures pour la mobilité et la qualité de service dans les systèmes satellites DVB-S2/RCSJacquemin, Baptiste 24 June 2010 (has links) (PDF)
Nos travaux de thèse ont pour objectif la conception, la mise en Suvre et l'évaluation d'architectures pour la mobilité et la qualité de service (QoS) dans des systèmes satellites DVB-S2/RCS. Ces systèmes peuvent constituer une solution alternative efficace aux réseaux terrestres dans des zones reculées à faible densité de population mais ils doivent pour cela offrir les mêmes services tout en tenant compte de leurs caractéristiques spécifiques, en particulier leur long délai de transmission qui peut s'avérer problématique dans le cadre d'applications multimédias interactives. Notre première contribution a donc été de développer une architecture de QoS adaptée à ce type d'applications, utilisant le modèle DiffServ et se basant essentiellement sur l'interaction entre l'architecture liée au protocole d'initiation de session SIP et différentes entités du système satellite. La QoS peut alors être configurée de façon précise au niveau des STs, par le biais de l'outil TC, en analysant les descripteurs de session SDP compris dans les messages SIP et en déduisant leurs caractéristiques (débit, gigue max, délai max, etc...) soit localement si elles sont connues, soit à partir d'un service Web que nous avons développé. Nous avons ensuite proposé et développé une solution de mobilité basée sur SIP, adaptée au système satellite ainsi qu'à la solution de QoS précédemment décrite. Les performances de cette solution ont alors été comparées, en termes de temps d'interruption et de consommation de ressources, avec celles obtenues par Mobile IPv6 et certaines de ses extensions, démontrant ainsi de réelles améliorations pour le cas des applications multimédias interactives. Enfin, notre dernière contribution a été de développer deux architectures couplant QoS et mobilité, une spécifiquement conçue pour les applications interactives et basée sur la combinaison de notre solution de mobilité SIP avec notre architecture de QoS SIP et une autre basée sur Mobile IPv6 ou FMI Pv6 et sur l'interaction d'un QoS Agent mobile avec les entités de QoS du système satellite. Ces architectures ont été évaluées et comparées sur la plateforme d'émulation PLATINE développée dans le cadre du projet SATSIX.
|
13 |
Catalisadores à base de ferro, vanádio e molibdênio suportados em titanatos lamelares e TiO2 comercial na aplicação da reação de NO com NH3Grosseli, Guilherme Martins 27 October 2011 (has links)
Made available in DSpace on 2016-06-02T19:56:45Z (GMT). No. of bitstreams: 1
3936.pdf: 2010584 bytes, checksum: 3be708f515e15835c7915065004f5f86 (MD5)
Previous issue date: 2011-10-27 / The minimization of emissions of nitrogen oxides (NOx) is a subject of great interest because they cause serious environmental problems affecting human health, flora and fauna. To break down the NOx catalytic reduction of these compounds to N2 has acquired great importance and may occur in the absence or presence of a reducing agent. The selective catalytic reduction using ammonia as a reducing agent (NH3-SCR) has been shown to be one of the most attractive, being used worldwide to control NOx emissions by industries due to its high efficiency, selectivity and low cost. To obtain more efficient catalysts for this reaction, several studies have been developed. In this context, the objective of this work is to prepare, to wet impregnation, catalysts based on vanadium, molybdenum and iron supported on commercial TiO2 and lamellar titanates (TL) with high (A-TL) or low-sodium (B-TL), and apply them to the reduction of NO with NH3.It was also studied the effect of calcination temperature in titanates with low sodium content. Results of XRD and adsorption of N2 measurements confirmed the formation of TL mesoporous structure and high specific surface area. After the addition of metal to TiO2 and TL, it was observed a significant decrease in the values of specific surface areas, attributed to the filling of pores by metal oxides. The RTP-H2 showed lower reducibility of metals supported on the lamellar titanates and commercial TiO2 support. The catalysts supported TL with high sodium content showed lower catalytic activity compared to commercial catalysts . However, the catalysts supported on titanates with low sodium content showed promising results in the conversion of NO to N2. The catalysts Fe2O3/TiO2 Fe2O3/B-TL showed loss of activity in the presence of SO2, which partially regenerates in the absence of the compound. In the presence of water, both catalysts showed a decline in the conversion, With the removal of H2O the Fe2O3/TiO2 showed partial regeneration, while the Fe2O3/B-TL suffered irreversible deactivation. / A minimização das emissões de óxidos de nitrogênio (NOx) é assunto de alto interesse pois causam graves problemas ambientais afetando a saúde humana, à flora e à fauna. Para abater os NOx, a redução catalítica desses compostos a N2 vem adquirindo grande relevância, podendo ocorrer na ausência ou presença de um agente redutor. A redução catalítica seletiva utilizando amônia como agente redutor (RCS-NH3) tem-se mostrado um dos processos mais atrativos, sendo mundialmente aplicado no controle de emissão do NOx pelas indústrias, devido a sua alta eficiência, seletividade e baixo custo. Para a obtenção de catalisadores mais eficientes para essa reação, diversos estudos tem sido desenvolvidos. Nesse contexto, o objetivo deste trabalho é preparar, via impregnação úmida, catalisadores à base de vanádio, molibdênio e ferro suportados em TiO2 comercial e titanatos lamelares (TL) com alto (A-TL) ou (B-TL) baixo teor de sódio, e aplicá-los na redução de NO com NH3. Foi verificado estudado também o efeito da temperatura de calcinação nos titanatos com baixo teor de sódio. Resultados de DRX e medidas de adsorção de N2 confirmaram a formação de TL de estrutura mesoporosa e de alta área superficial específica. Após a adição dos metais aos suportes TiO2 e TL, foi observada uma queda significativa nos valores das áreas superficiais específicas, atribuída ao preenchimento dos poros pelos óxidos metálicos. O RTP-H2 indicou menor redutibilidade dos metais suportados nos titanatos lamelares frente ao suporte TiO2 comercial. Os catalisadores suportados em TL com alto teor de sódio apresentaram atividade catalítica inferior quando comparados aos catalisadores suportados em TiO2 comercial. No entanto, os catalisadores suportados nos titanatos com baixo teor de sódio apresentaram resultados promissores na conversão do NO a N2. Os catalisadores Fe2O3/TiO2 e Fe2O3/B-TL registraram queda parcial na atividade quando na presença do SO2, que se regenera parcialmente na ausência do composto. Na presença de água, ambos catalisadores apresentaram queda na conversão, sendo que, na retirada deste composto, o Fe2O3/TiO2 apresentou parcial regeneração, ao passo que, o Fe2O3/B-TL, sofreu desativação irreversível.
|
14 |
Mécanismes d'optimisation multi-niveaux pour IP sur satellites de nouvelle génération / Cross-layer optimisation mechanisms for IP in next-generation satellite networksNiculae, Alexandra Mihaela 05 November 2009 (has links)
L'objectif de cette thèse est de fournir aux réseaux satellitaires géostationnaires des outils d'amélioration de performances dans un contexte contraint, lié au support de communication qui présente une qualité variable. Les défis s'étendent de la couche d'accès au support (l'ordonnancement) à la couche transport (le comportement du TCP étant sensible au délai de propagation dans les réseaux géostationnaires). Nous faisons appel aux mécanismes cross-layer qui mettent en place des interactions entre entités protocolaires non adjacentes du modèle OSI offrant ainsi une adaptation immédiate au changement des conditions dans le réseau. Nous employons à ce but une technique cross-layer informant l'entité protocolaire TCP du débit disponible, permettant d'éviter des conséquences telles que la chute du débit et des pertes liées à la congestion des files d'attente. Nous mettons en oeuvre ce mécanisme au niveau d'un élément sensible du réseau géostationnaire, le proxy TCP. L'intérêt des techniques cross-layer a été mis en évidence au niveau de l'ordonnanceur présent au sein de la gateway d'un réseau DVB-S2/DVB-RCS. Ainsi, ils contribuent à la maximisation de la capacité du système, à l'assurance des contraintes de qualité de service, à l'équité de l'allocation de ressources, etc. Enfin, nous présentons une solution possible d'architecture cross-layer. Nous proposons des caractéristiques demandées pour une architecture cross-layer afin d'assurer l'évolutivité, la modularité et la co-existence avec l'architecture standard existante. / The main objective of this thesis is to provide tools of improving performance of geostationary satellite networks, operating in a constrained environment mainly due to the variable quality of radio links. There are protocol layers being challenged by such characteristics, such as the medium access protocol and the transport layer protocol (TCP behaviour is impacted by the long propagation delay in geostationary satellite networks). We employ cross-layer mechanisms implementing interaction between non-adjacent protocol layers defined by the OSI architecture aiming at providing a rapid adaptation to changes in network state. We provide a cross-layer technique informing TCP protocol of the available network rate, thus preventing consequences such as TCP rate drop or loss due to buffer overflow. This mechanism is to be implemented in a sensible network element, such as a TCP proxy. Data link layer scheduler can benefit from the advantages of employing cross-layer mechanisms, especially at the gateway of a DVB-S2/DVB-RCS satellite network. The improved scheduler allows an efficient use of network resources and helps insuring quality of services constraints, resource allocation fairness, etc. Finally, we propose a cross-layer architecture along with in-demand characteristics able to offer an inter-operability with the existing architecture, an easy up-grade and design.
|
15 |
Synthetic Aperture Radar Simulation for Point and Extended TargetsAdewoye, Akintunde 10 1900 (has links)
<p>Basic radar systems use electromagnetic wave reflections from targets to determine the motion characteristics of these targets. Synthetic Aperture Radar (SAR) systems use the reflections to produce target images as well. SAR is an imaging radar system that produces high resolution images of a scene or target by using radar motion to synthesize the antenna aperture. A SAR model to handle extended targets and point targets in faster time is presented, as are some simulated results. This thesis explains synthetic aperture concepts, the model used and a simulation of a SAR system. It runs through modelling point targets as well as extended targets by using the resolution cells of the radar, creating the raw signal data from the target information and then the signal processing that converts the raw data to a SAR image. The simulation was done for better understanding of synthetic aperture parameters and it was done in C++ programming language for improved processing speed. In comparison to previous simulations obtained from literature review, there is an increase in speed of more than 2.5 times as the number of targets increases, producing higher resolution images in less time. A model to handle extended targets was presented while also showing the imperfections due to the model assumptions. These assumptions are then explained as the best option in the absence of extra geographic information on the target scene.</p> / Master of Applied Science (MASc)
|
16 |
Tests of the RCS Method for Preserving Low-Frequency Variability in Long Tree-Ring ChronologiesEsper, Jan, Cook, Edward R., Krusic, Paul J., Peters, Kenneth, Schweingruber, Fritz H. January 2003 (has links)
To preserve multi-centennial length variability in annual tree-ring chronologies, the Regional Curve Standardization (RCS) method calculates anomalies from a regionally common, non-climatic age-trend function. The influence of various factors on the estimation of the regional curve (RC) and resulting RCS- chronology is discussed. These factors are: the method of calculating anomalies from the age-trend function, estimation of the true pith offset, the number of series used, species composition, and site characteristics. By applying RCS to a collection of millennium-length tree-ring data sets, the potential and limitations of the RCS method are investigated. RCS is found to be reasonably robust with respect to tested factors, suggesting the method is a suitable tool for preserving low-frequency variance in long tree-ring chronologies.
|
17 |
Les Modulations à Phase Continue pour la Conception d'une Forme d'Onde Adaptative Application aux Futurs Systèmes Multimédia par Satellite en Bande KaChaggara, Ridha 12 1900 (has links) (PDF)
Dans le cadre de cette thèse nous nous intéressons à la liaison d'un terminal utilisateur vers un satellite géostationnaire pour les futurs systèmes d'applications multimédia en bande Ka. Le but est de concevoir une forme d'onde qui permet de s'adapter aux conditions de propagation. L'adaptation des performances en spectre et en puissance de la forme d'onde, notamment dans un contexte avec une forte fluctuation du niveau du signal, comme celui du canal satellite en bande Ka, permet à la fois d'augmenter la capacité et d'améliorer la disponibilité du système. Dans ces travaux, les formes d'onde basées sur les modulations CPM (Continuous Phase Modulation) ont été adoptées. L'enveloppe constante, les différents paramètres ayant un impact sur les performances de la forme d'onde, ainsi que les bonnes performances en puissance lors d'un processus de décodage itératif sont les principales motivations de notre choix. Concernant l'adaptativité nous montrons qu'une forme d'onde CPM basée sur la variation de l'indice de modulation (et éventuellement la réponse en fréquence) au sein d'une famille d'indices ayant un même dénominateur est une solution particulièrement attractive. Une telle solution ne nécessite pas une très grande complexité lors d'un passage d'un mode de transmission à un autre. Elle nécessite essentiellement le changement des coefficients des filtres adaptés. Cette technique permet aussi d'obtenir une marge de performance assez importante vu que l'indice de modulation est le paramètre qui affecte le plus les performances de la CPM. La CPM octale 2RC est un schéma particulièrement attractif d'un point de vue performance.
|
18 |
Implementation of a fast method for reconstruction of ISAR images / Implementation av en snabb metod för rekonstruktion av ISAR-bilderDahlbäck, Niklas January 2003 (has links)
<p>By analyzing ISAR images, the characteristics of military platforms with respect to radar visibility can be evaluated. The method, which is based on the Discrete-Time Fourier Transform (DTFT), that is currently used to calculate the ISAR images requires large computations efforts. This thesis investigates the possibility to replace the DTFT with the Fast Fourier Transform (FFT). Such a replacement is not trivial since the DTFT is able to compute a contribution anywhere along the spatial axis while the FFT delivers output data at fixed sampling, which requires subsequent interpolation. The interpolation leads to a difference in the ISAR image compared to the ISAR image obtained by DTFT. On the other hand, the FFT is much faster. In this quality-and-time trade-off, the objective is to minimize the error while keeping high computational efficiency. </p><p>The FFT-approach is evaluated by studying execution time and image error when generating ISAR images for an aircraft model in a controlled environment. The FFT method shows good results. The execution speed is increased significantly without any visible differences in the ISAR images. The speed-up- factor depends on different parameters: image size, degree of zero-padding when calculating the FFT and the number of frequencies in the input data.</p>
|
19 |
Composite RCS frame systems: construction and peformanceSteele, John Phillip 30 September 2004 (has links)
The objective of this research program is to further evaluate the performance and constructability of reinforced concrete (RC) column-steel beam-slab systems (RCS) for use in low- to mid-rise space frame buildings located in regions of high wind loads and/or moderate seismicity. To better understand these systems, two full scale RCS cruciform specimens were tested under bidirectional quasi-static reversed cyclic loading. The experimental portion of this research program included the construction and testing of two full-scale cruciform specimens with identical overall dimensions but with different joint detailing. The two joint details evaluated were joint cover plates and face bearing plates with localized transverse ties. The construction process was recorded in detail and related to actual field construction practices. The specimens were tested experimentally in quasi-static reversed cyclic loading in both orthogonal loading directions while a constant axial force was applied to the column, to simulate the wind loads in a subassembly of a prototype building. To compliment the experimental work, nonlinear analyses were performed to evaluate the specimen strength and hysteretic degradation parameters for RCS systems. In addition, current recommendations in the literature on the design of RCS joints were used to estimate specimen joint strength and were compared with the experimental findings.
|
20 |
Radiographers’ Professional Competence : Development of a context-specific instrumentAndersson, Bodil T. January 2012 (has links)
Aims: The overall aim of this thesis was to explore and describe radiographers‟ professional competence based on patients‟ and radiographers‟ experiences and to develop a context-specific instrument to assess the level and frequency of use of radiographers‟ professional competence. Methods: The design was inductive and deductive. Both qualitative and quantitative methods were used. The data collection methods comprised interviews (Studies I-II) and questionnaires (Studies III-IV). The subjects were patients in study I and radiographers in studies II-IV. In study I, 17 patients were interviewed about their experiences of the encounter during radiographic examinations and treatment. The interviews were analysed using qualitative content analysis. In study II, 14 radiographers were interviewed to identify radiographers‟ areas of competence. The critical incident technique was chosen to analyse the interviews. Studies III and IV were based on a national cross-sectional survey of 406 randomly selected radiographers. Study III consisted of two phases; designing the Radiographer Competence Scale (RCS) and evaluation of its psychometric properties. A 42-item questionnaire was developed and validated by a pilot test (n=16) resulting in the addition of 12 items. Thus the final RCS comprised a 54-item questionnaire, which after psychometric tests was reduced to 28 items. In study IV, the 28-item questionnaire served as data. The level of competencies was rated on a 10-point scale, while their use was rated on a six-point scale. Results: In study I, the female patients‟ comprehensive understanding was expressed as feelings of vulnerability. The encounters were described as empowering, empathetic, mechanical and neglectful, depending on the radiographers‟ skills and attitudes. Study II revealed two main areas of professional competence, direct patient-related and indirect patient-related. The first focused on competencies in the care provided in close proximity to the patient and the second on competencies used in the activities of the surrounding environment. Each of the two main areas was divided into four categories and 31 sub-categories that either facilitated or hindered good nursing care. In study III the analysis condensed the 54-item questionnaire in two steps, firstly by removing 12 items and secondly a further 14 items, resulting in the final 28-item RCS questionnaire. Several factor analyses were performed and a two factor-solution emerged, labelled; “Nurse initiated care” and “Technical and radiographic processes”. The psychometric tests had good construct validity and homogeneity. The result of study IV demonstrated that most competencies in the RCS received high ratings both in terms of level and frequency of use. Competencies e.g. „Adequately informing the patient‟, „Adapting the examination to the patient‟s prerequisites and needs‟ and „Producing accurate and correct images‟ were rated the highest while „Identifying and encountering the patient in a state of shock‟ and „Participating in quality improvement regarding patient safety and care‟ received the lowest ratings. The total score of each of the two dimensions had a low but significant correlation with age and years in present position. The competence level correlated with age and years in present position in both dimensions but not with the use of competencies in the “Nurse initiated care” dimension. Conclusion: This thesis has shown that professional competence is important in the encounter between patient and radiographer. It has also demonstrated that radiographers‟ self-rated professional competence is based on nursing, technological and radiographic knowledge. From a radiographer‟s perspective, „Nurse initiated care‟ and „Technical and Radiographic processes‟ are two core dimensions of Radiographer Competence Scale. The 28-item questionnaire regarding level and frequency of use of competence is feasible to use to measure radiographers‟ professional competence.
|
Page generated in 0.0387 seconds