Spelling suggestions: "subject:"rolls"" "subject:"polls""
21 |
A framework for the introduction of knowledge management within an engineering environmentUbhi, Hardev January 2008 (has links)
This research is based on real issues that have been recognised within the global organisation, Rolls-Royce. The first aim concerned an issue that many companies face, the difficulty that employees face in locating the knowledge and information they require, especially in larger organisations. The developed solution of an Information Map proved to be a success in providing people within the Submarines business with the location of' Configuration Management information. The concept of the Information Map is one that can be adopted by any business as the stages in the tools development have been well documented within Chapters Four, Five and Six. Analysis of the success of the Information Map led to the derivation of 10 lessons learned. These were then verified in a second case study of an intranet development. The second aim of the research was to create a Knowledge Management framework that could be adapted by companies looking to invest in Knowledge Management and provide them with a guide to use. This framework was built from the lessons learned from the Information Map and from other best practice derived from available literature and within Rolls-Royce. The work conducted within the Support business tries to fill in gaps in current research by offering companies a new approach to Knowledge Management, which was based upon the way that industries work today. The creation of the Knowledge Management framework simplifies the work conducted and offers practitioners an easy, high-level approach to the adoption of Knowledge Management by grouping the process into ten steps. This is presented in a fashion that is easy to follow and ultimately offers a guide to make the best use of the resources and budget available to Knowledge Management practitioners. Overall the research addresses the 'real' issues faced by Knowledge Management practitioners. The main contributions to the Knowledge Management domain are the Information Map, action research approach, implementation of Knowledge Management tools for the users needs and a Framework as a guide for industry.
|
22 |
Wind and atmospheric stability characteristics over the Baltic SeaSvensson, Nina January 2016 (has links)
In recent years there has been an increase in offshore wind energy, which poses the need for accurate wind speed estimates in the marine environment, especially in coastal areas where most wind turbines will be placed. This thesis is focused on the Baltic Sea, which is a small, semi-enclosed sea where land-sea interaction play an important role in explaining the wind patterns. Mesoscale model simulations can be used to study the marine environment, where observations are often scarce. In this thesis the Weather Research and Forecasting (WRF) model is used. In the first study simulations show that stable stratification over sea is very common in spring and summer and is associated with an increase in low-level jet occurrence and increased wind shear below 200 m, at heights where wind turbines are erected. The model performance in stable conditions is evaluated against aircraft measurements using several boundary layer parametrization schemes, and it is shown that the low-level jet height and strength is not accurately captured with any of the parametrizations. In the second study the advection of land features is investigated. From simulations, aircraft observations and satellite images it is shown that boundary layer rolls are created in the convective boundary layer over land, and advected several tens of kilometres out over sea surface, despite the stable stratification, where convective turbulence dissipates quickly. The occurrence of boundary layer rolls gives rise to horizontal wind speed variations of several meters per second over distances of kilometres, which can increase the uncertainty of short term wind speed forecasts in coastal areas with offshore flow. It is shown that mesoscale processes in and above the marine boundary layer are important in modifying the wind field in distances of at least 100 km from the coast and that models still need to be improved in order to capture these conditions. / Under de senaste decennierna har vindkraftsutbyggnaden ökat till havs, vilket innebär att det krävs tillförlitliga vindhastighetsuppskattningar över hav, särskilt i kustområden, där de flesta vindturbinerna kommer att placeras. Den här avhandlingen kommer att fokusera på Östersjön, vilket är ett relativt litet hav omgivet av landmassor, där land-hav-interaktion har en stor påverkan på vindmönstren över havet. Mesoskaliga modeller kan användas för att studera den lägre delen av den marina atmosfären. I den här avhandlingen används modellen "Weather Research and Forecasting" (WRF). I den första studien visar simuleringar att stabila förhållanden över havet är vanligt förekommande under sommar och vår, och sker i samband med en ökad förekomst av vindmaxima på låg höjd och ökad vindskjuvning under 200 m - alltså på höjder där vindkraftverk förekommer. Modellen, med flertalet gränskiktsparametriseringar, utvärderas för stabila fall mot flygplansmätningar, och resultaten visar att styrkan och höjden för vindmaxima är antingen över- eller underskattade oavsett parametrisering. I den andra studien undersöks advektiva fenomen. Simuleringar, flyplansobservationer och satellitbilder visar att avlånga rullvirvlar uppstår i det konvektiva gränsskiktet över land och advekteras flera tiotals kilometer över hav ut från kusten. Detta trots stabila förhållanden över havet, där den konvektiva turbulensen snabbt dör ut. Rullvirvlarna ger upphov till variationer i horisontell vindhastighet på flera meter per sekund över avstånd på några kilometer, vilket kan öka osäkerheten hos korttidsprognoser för vind när det är blåser från land. Sammanfattningsvis har det har visats att mesoskaliga processer i och ovanför det marina gränsskiktet har en stor inverkan på vindfältet åtminstone 100 km från kusten, och modeller behöver fortfarande förbättras för att kunna fånga dessa företeelser. / StandUp for Wind
|
23 |
Development and improvement of sorghum-based gluten-free dinner rollsBianchi, Marc Pierre January 1900 (has links)
Master of Science / Department of Food Science / Fadi Aramouni / Despite the expansion of the gluten-free (GF) food market, some GF food items are still characterized by an overall mediocre quality. The effects of different types of egg ingredients (fresh, whites, dried) and carob germ flour (CGF) as well as par-baking technology on the quality of dough-based gluten-free sorghum dinner rolls were evaluated. Gluten-free rolls containing 30% of fresh shell eggs or equivalent of egg products and 10% of CGF on a flour basis were evaluated against a control (no egg, no CGF). The feasibility of partial baking of rolls was studied on control as well as fresh eggs and carob germ flour formulas during 5 baking times (0, 8, 10, 12 and 18 minutes). Breads were evaluated for crumb and crust color, specific volume, cell profile, Texture Profile Analysis (TPA) and consumer acceptability. Results showed that rolls containing egg ingredients had higher specific volumes than control (p<0.05) with an increase from 1.45 cm[superscript]3/g to 1.96 cm[superscript]3/g. Carob germ flour did not have a significant effect on specific volume. Eggs also improved cell elongation and produced significantly darker crust (p<0.05). CGF did not appear to have an effect on cell elongation but increased average cell number when combined with egg ingredients, and greatly impacted rolls texture. The combination of fresh eggs or egg whites with CGF reduced significantly (p<0.05) crumb hardness from 2,074 to 1,404g and 1,468g of force respectively. Par-baked dinner rolls displayed similar color, volume, cell profile and texture trends to conventionally baked rolls. Sensory study revealed that acceptability, organoleptic characteristics and willingness to buy of par-baked dinner rolls could be similar to that of conventional wheat products. This research proved that the addition of eggs and CGF to a GF rolls formulation resulted in better overall quality of the product. Moreover, par-baking of the rolls showed great potential to provide safe, convenient and acceptable GF foods to celiac individuals.
|
24 |
Effects of Nonfat Dry Milk, Whey Protein Concentrate and Calcium Caseinate on Color and Texture of Turkey RollsDobson, Brent Neeley 01 May 1994 (has links)
Two studies were conducted to evaluate the effects of milk solids on restructured and emulsified turkey rolls. the milk solids used were nonfat dry milk (NFDM), whey protein concentrate (WPC), and calcium caseinate (CC). Turkey rolls consisted of 100% breast meat or 90:10 or 70:30 breast-to-thigh, salt (1%), water (10%), internal or cluster fat (10%), and 3% of various milk solids (WPC, NFDM, CC).
The objectives of these studies were to 1) determine which ratio between light and dark meat is preferred; 2) determine which of milk solids evaluated will permit the highest level of dark meat incorporation into evaluated products; 3) determine if there is a mechanism by which milk proteins lighten poultry meat; and 4) determine which milk protein produces the best bind between meat pieces. Panelists were used in the first study to evaluate cooked meat attributes of color intensity, color uniformity, cohesiveness, tenderness, roasted turkey flavor, juiciness, and overall acceptability. The attributes were rated on a seven-point scale. Rolls made with WPC or NFDM scored significantly higher for color uniformity, cohesiveness, roasted turkey flavor, and overall acceptability than rolls made with CC. No differences were noted among treatments for juiciness or toughness with rolls of the same light-to-dark meat ratio. However, the 90:10 rolls were rated significantly more tender than the rolls made with the 70:30 ratio. Rolls containing milk solids had significantly higher yields than the controls.
In the second study, rolls were made using the preferred meat ratio (90:10 breast:thigh meat). NFDM and WPC were used as binders, but not CC, since in the first study it was an ineffective binding agent. The second study showed that no whitening or lightening occurred in turkey rolls. This researcher also found that both NFDM and WPC increased bind strength between meat pieces. Controls made without added milk solids had less bind strength between the meat particles. Meat particle size also affected bind strength in finished products, with finely chopped rolls having higher bind strength than coarsely ground rolls. Moreover, the second study had unexpected results indicating that NFDM will prevent development of pink discoloration during refrigerated storage. The penetrometer used for bind measurements is described.
|
25 |
Effect of Oxidation-Reduction Potential on Hemochrome Formation and Resultant Pink Color Defect of Cooked Turkey RollsVahabzadeh, Farzaneh 01 May 1986 (has links)
A pink color defect is commonly observed in freshly cut surfaces of cooked turkey rolls and fades rapidly upon exposure to air. The non uniform pink color makes the product appear undercooked, and the product must be discounted. The oxidation-reduction potential of the meat is important in development of pink defect. A pink color similar to that of commercial product was observed when the cooked meat was treated with either sodium nitrite or sodium dithionite. The pink color in nitrite treated meat was due to nitroso pigment formation, but in samples treated with dithionite the pink color was due to formation of a hemochrome complex. Pink color was also observed in turkey rolls formulated with nicotinic acid, nicotinamide or sodium nitrite. Reflectance and absorbance spectrophotometric studies on commercial or laboratory prepared samples having pink defect showed that the responsible pigment was a reduced hemochrome rather than a nitroso pigment. The hemochrome is probably a nicotinamide-denatured globin complex with ferrous iron of the heme molecule.
Oxidation-reduction potential measurement of meat systems showed that hemochrome formation is promoted by reducing conditions and prevented by oxidizing conditions. All constituents necessary for formation of pink defect are present in turkey meat, the variable most affecting its appearance being the redox potential of the meat.
|
26 |
Tribology in Metal WorkingNilsson, Maria January 2012 (has links)
This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions in the process. Consequently, the surface finish as well as the dimensions of the formed product may change and in the end, the product will not fulfil the requirements of the customer. Therefore, research and development in regard to wear, and consequently tribology, of the forming tools is of great interest. The investigations of wire drawing dies focus on coating adhesion/cohesion, surface characteristics and material transfer onto the coated steel both in laboratory scale as well as in the wire drawing process. Results show that it in wire drawing is possible to enhance the tribological performance of drawing dies by using a lubricant together with a steel substrate coated by a polished, dual-layer coating containing both hard and friction-lowering layers. The investigations of hot rolling work rolls focus on microstructure and hardness as well as cracking- and surface characteristics in both laboratory scale and in the hot strip mill. Results show that an ideal hot work roll material should be made up of a matrix with high hardness and a large amount of complex, hard carbides evenly distributed in the microstructure. The surface failure mechanisms of work rolls are very complex involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. This knowledge may be used to develop new tools with higher wear resistance giving better performance, lower costs and lower environmental impact.
|
27 |
A comparative study of Claude Debussy's piano music scores and his own piano playing of selections from his Welte-Mignon piano roll recordings of 1912Lee, Kyung-ae. January 2001 (has links)
Thesis (D.M.A.)--University of Texas at Austin, 2001. / Vita. Includes bibliographical references. Available also from UMI/Dissertation Abstracts International.
|
28 |
Transcendent Sounds: The Early Piano Music of Alexander ScriabinWhitehead, Laura Lynn 03 April 2014 (has links)
Studies of Alexander Scriabin (1871-1915) have traditionally focused on his middle- and late-period music after 1902. Discussions of his personal philosophy and its impact on his music also concentrate on these two periods. This thesis examines Scriabin’s philosophy and piano music from a sub-section of his early period—1892 to 1897—that I designate his “formative” period. I argue that Scriabin’s eccentric belief in transcendence through music was already developing and influencing his music during his formative period. Evidence to support this theory is found in three areas: context, performance practice and analysis. A contextual evaluation of Scriabin’s formative years is compared against his late ideologies from his opera and the Mysterium. Scriabin’s performance practices, as seen in both first-hand documentation and his piano roll recordings, reveal possible philosophical performance traits. Analyses of selected formative compositions expose philosophical and performance related elements, demonstrating the interaction between composer, pianist and philosopher. / Graduate / 0413 / lauralwhitehead@hotmail.com
|
29 |
Transcendent Sounds: The Early Piano Music of Alexander ScriabinWhitehead, Laura Lynn 03 April 2014 (has links)
Studies of Alexander Scriabin (1871-1915) have traditionally focused on his middle- and late-period music after 1902. Discussions of his personal philosophy and its impact on his music also concentrate on these two periods. This thesis examines Scriabin’s philosophy and piano music from a sub-section of his early period—1892 to 1897—that I designate his “formative” period. I argue that Scriabin’s eccentric belief in transcendence through music was already developing and influencing his music during his formative period. Evidence to support this theory is found in three areas: context, performance practice and analysis. A contextual evaluation of Scriabin’s formative years is compared against his late ideologies from his opera and the Mysterium. Scriabin’s performance practices, as seen in both first-hand documentation and his piano roll recordings, reveal possible philosophical performance traits. Analyses of selected formative compositions expose philosophical and performance related elements, demonstrating the interaction between composer, pianist and philosopher. / Graduate / 0413 / lauralwhitehead@hotmail.com
|
30 |
Rolls-Royce and the Future of Luxury MobilityÖstman, Ludwig January 2018 (has links)
The topic of the project has been about the future of luxury mobility and how the brand Rolls-Royce could evolve alongthe technological advancements until the year 2038. As luxury is changing from being about possession to the experience of luxury, the goal was to design a vehicle that could support both new internal and external experiences about the vehicle. The identified obstacle that could limit the scope of new experi- ences in an autonomous vehicle is motion sickness. As cities grow and technology develops the future cities are crowded so personal space, and privacy is being limited.During the process, the tools used varied from form explora- tion through sketching, concept principle testing and finalization in 3d software as well as visualization tools to communicate the proposed solutions. Working out of the Rolls-Royce designstudio provided brand insight but also expertise in the field of color & materials as well as advice on engineering solutions from the design team.The result Rolls-Royce Luxe Nomad is a vehicle for exploring the world outside the urban areas. Going far and beyond in search of new and unique experiences but also making the trip there as enjoyable as possible. The concept provides a solution inspired by high-speed trains that could limit those effects. Through understanding the future customers need of privacy a method of controlling the amount of insight was developed to enhance the user experience and giving them an increased sense of control of their space.
|
Page generated in 0.0212 seconds