91 |
Elastic Press and Die Deformations in Sheet Metal Forming SimulationsPilthammar, Johan January 2017 (has links)
Never before has the car industry been as challenging, interesting, and demanding as it is today. New and advanced techniques are being continuously introduced, which has led to increasing competition in an almost ever-expanding car market. As the pace and complexity heightens in the car market, manufacturing processes must advance at an equal speed. An important manufacturing process within the automotive industry, and the focus of this thesis, is sheet metal forming (SMF). Sheet metal forming is used to create door panels, structural beams, and trunk lids, among other parts, by forming sheets of metal in press lines with stamping dies. The SMF process has been simulated for the past couple of decades with finite element (FE) simulations, whereby one can predict factors such as shape, strains, thickness, springback, risk of failure, and wrinkles. A factor that most SMF simulations do not currently include is the die and press elasticity. This factor is handled manually during the die tryout phase, which is often long and expensive. The importance of accurately representing press and die elasticity in SMF simulations is the focus of this research project. The research objective is to achieve virtual tryout and improved production support through SMF simulations that consider elastic die and press deformations. Loading a die with production forces and including the deformations in SMF simulations achieves a reliable result. It is impossible to achieve accurate simulation results without including the die deformations. This thesis also describes numerical methods for optimizing and compensating tool surfaces against press and die deformations. In order for these compensations to be valid, it is imperative to accurately represent dies and presses. A method of measuring and inverse modeling the elasticity of a press table has been developed and is based on digital image correlation (DIC) measurements and structural optimization with FE software. Optimization, structural analysis, and SMF simulations together with experimental measurements have immense potential to improve simulation results and significantly reduce the lead time of stamping dies. Last but not least, improved production support and die design are other areas that can benefit from these tools. / Aldrig tidigare har bilindustrin varit så utmanande, intressant och spännande som idag. Ny och avancerad teknik introduceras i en allt snabbare takt vilket leder till ständigt ökande konkurrens på en, nästan ständigt, ökande bilmarknad. Den ständigt ökande komplexiteten ställer även krav på tillverkningsprocesserna. En viktig process, som denna licentiatuppsats fokuserar på, är pressning av plåt. Tillverkningstekniken används för att forma plåtar till dörrpaneler, strukturbalkar, motorhuvar, etc. Plåtar formas med hjälp av pressverktyg monterade i plåtformningspressar. Plåtformningsprocessen simuleras sedan ett par decennium tillbaka med Finita Element (FE) simuleringar. Man kan på så sätt prediktera form, töjningar, tjocklek, återfjädring, rynkor, risk för försträckning och sprickor m.m. En faktor som för tillfället inte inkluderas i näst intill alla plåtformningssimuleringar är elastiska press- och verktygsdeformationer. Detta hanteras istället manuellt under, den oftast långa och dyra, inprovningsfasen. Detta projekt har visat på vikten av att representera press och verktygsdeformationer i plåtformningssimuleringar. Detta demonstreras genom en analys av ett verkligt pressverktyg som belastas med produktionskrafter. Det är inte möjligt att uppnå bra simuleringsresultat utan att inkludera verktygsdeformationer i simuleringsmodellen. Uppsatsen beskriver även numeriska metoder för att optimera och kompensera verktygsytor mot press och verktygsdeformationer. För att dessa kompenseringar ska stämma är det viktigt att man representerar både verktyg och press på ett korrekt sätt. Förslag på en metod för att mäta och inversmodellera pressdeformationer har utvecklats, metoden är baserad på mätningar med DIC-systemet ARAMIS och optimering i FE-mjukvaror. Optimering, strukturanalys, och plåtformningsanalys tillsammans med experimentella mätningar har en stor potential att förbättra plåtformningssimuleringar samt reducera ledtiden för pressverktyg. Sist men inte minst, andra positiva effekter är en enklare och smidigare konstruktionsprocess och förbättrad produktionssupport.
|
92 |
Validation and robust optimization of deep drawing process by simulation in the presence of uncertainty / Validation et optimisation robuste d’un procédé d’emboutissage par simulation en contexte incertainNguyen, Von Dim 26 February 2015 (has links)
L’objectif ultime de ce travail de thèse est d’évaluer la possibilité de valider et d’optimiser un processus de fabrication en utilisant la simulation numérique en tenant compte des incertitudes irréductibles sur le procédé, les matériaux et la géométrie du produit fabriqué. La prise en compte des incertitudes nécessite de quantifier les effets des variations des paramètres du modèle sur les sorties de celui-ci, en propageant ces variations via la simulation numérique pour évaluer leurs effets sur les sorties. Dans ce travail nous avons proposé une procédure pour déterminer le seuil de sensibilité du modèle numérique afin de construire des plans d’expériences numériques cohérents avec ce seuil. Nous avons également montré que, compte tenu des incertitudes sur les matériaux et la géométrie du produit, il est possible d’optimiser certains paramètres du procédé pour contrôler les effets des incertitudes sur les variations dimensionnelles et morphologiques du produit. Pour cela, nous avons proposé une procédure d’optimisation basée sur un algorithme NSGA-II et une méta-modélisation du procédé. L’application à l’emboutissage d’une tôle en U, retour élastique inclus, montre qu’il s’agit d’un problème de conception robuste pour lequel nous obtenons l’ensemble des compromis entre l’écart à la moyenne et l’écart type d’une fonction « performance » du procédé correctement choisie. Finalement l’analyse de ces résultats nous permet de quantifier le lien entre la notion de robustesse d’une solution optimisée du procédé et les critères de mesure de la qualité du produit / The ultimate objective of this thesis is to evaluate the possibility to validate and optimize a manufacturing process using numerical simulation and taking into account the irreducible uncertainties in the process, materials and geometry of manufactured product. Taking into account the uncertainties requires quantifying the effects of variations of model parameters on the outputs, by propagating these variations via computer simulation to assess their effects on the outputs. In this work, we have proposed a procedure to determine the sensitivity threshold of the numerical model to build numerical Design of Experiments consistent with this threshold. We have also shown that, given the uncertainties in the materials and the geometry of the product, it is possible to optimize certain process parameters to control the effects of uncertainties on the dimensional and morphological variations of the product. For this, we have proposed an optimization procedure based on NSGA-II algorithm and a meta-modeling of the process. The application for deep drawing of a U-shaped sheet metal part, springback included shows that it is a robust design problem for which we get all the compromise between the deviation from the mean and standard deviation of a "performance" depending on the process correctly chosen. Finally, the analysis of these results allows us to quantify the relationship between the notion of robustness of an optimized solution of the process and criteria for measuring the quality of the product
|
93 |
Solid–shell finite elements for quasi-static and dynamic analysis of 3D thin structures : application to sheet metal forming processes / Éléments finis solide-coque pour l’analyse quasi-statique et dynamique des structures minces 3d : application aux procédés de mise en formeWang, Peng 06 April 2017 (has links)
La simulation numérique par la méthode des éléments finis (MEF) fournit de nos jours une grande aide pour les ingénieurs dans les processus de conception d’optimisation des produits. Malgré le développement croissant des ressources de calcul, la fiabilité et l’efficacité des simulations numériques par la MEF restent à améliorer. Ce travail de thèse consiste à développer une famille d’éléments solide-coque (SHB) pour la modélisation tridimensionnelle des structures minces. Cette famille d’éléments SHB est basée sur une formulation tridimensionnelle en grands déplacements et rotations. La technique dite “d’intégration réduite dans le plan”, en utilisant un nombre arbitraire de points d’intégration dans la direction de l’épaisseur, permet la modélisation des structures minces avec une seule couche d'éléments. Dans ce travail de thèse, deux éléments linéaires SHB prismatique et hexaédrique, ainsi que leurs contreparties quadratiques, ont été implantés dans le code par éléments finis ABAQUS pour l’analyse quasi-statique et dynamique des structures minces. La performance de ces éléments a été validée à travers une série de cas tests académiques, ainsi que sur des problèmes complexes de type impact/crash et des procédés de mise en forme de tôles minces. L'ensemble des résultats numériques obtenus révèle que les éléments SHB représentent une alternative intéressante aux éléments coques et solides traditionnels pour la modélisation tridimensionnelle des structures minces. / Nowadays, the finite element (FE) simulation provides great assistance to engineers in the design of products and optimization of manufacturing processes. Despite the growing development of computational resources, reliability and efficiency of the FE simulations remain the most important features. The current work contributes to the development of a family of assumed strain based solid-shell elements (SHB), for the modeling of 3D thin structures. Based on reduced integration and special treatments to eliminate locking effects and to control spurious zero-energy modes, the SHB solid‒shell elements are capable of modeling most thin 3D structural problems with only a single element layer, while describing accurately the various through-thickness phenomena. In the current contribution, a family of prismatic and hexahedral SHB elements with their linear and quadratic versions have been implemented into ABAQUS using both standard/quasi-static and explicit/dynamic solvers. The performance of the SHB elements is evaluated via a series of popular benchmarks as well as with impact/crash and sheet metal forming processes. All numerical results reveal that the SHB elements represent an interesting alternative to traditional shell and solid elements for the 3D modeling of thin structural problems.
|
94 |
A Numerical Study Of Localized Necking During Forming Of Aluminium Alloy Tubes Using A Continuum Damage ModelVarma, N Siva Prasad 12 1900 (has links) (PDF)
No description available.
|
95 |
Sheet metal forming in the era of industry 4.0 : using data and simulations to improve understanding, predictability and performanceTatipala, Sravan January 2019 (has links)
A major issue within automotive Sheet Metal Forming (SMF) concerns ensuring desired output product quality and consistent process performance. This is fueled by complex physical phenomena, process fluctuations and complicated parameter correlations governing the dynamics of the production processes. The aim of the thesis is to provide a deeper understanding of the challenges and opportunities in this regard within automotive SMF. The research is conducted in collaboration with a global automotive manufacturer. The research shows that systematic investigations using process simulation models allow exploration of the product-process parameter interdependencies and their influence on the output product quality. Furthermore, it is shown that incorporating in-line measured data within process simulation models enhance model prediction accuracy. In this regard, automating the data processing and model configuration tasks reduces the overall modelling effort. However, utilization of results from process simulations within a production line requires real-time computational performance. The research hence proposes the use of reduced process models derived from process simulations in combination with production data, i.e. a hybrid data- and model-based approach. Such a hybrid approach would benefit process performance by capturing the deviations present in the real process while also incorporating the enhanced process knowledge derived from process simulations. Bringing monitoring and control realms within the production process to interact synergistically would facilitate the realization of such a hybrid approach. The thesis presents a procedure for exploring the causal relationship between the product-process parameters and their influence on output product quality in addition to proposing an automated approach to process and configure in-line measured data for incorporation within process simulations. Furthermore, a framework for enhancing output product quality within automotive SMF is proposed. Based on the thesis findings, it can be concluded that in-line measured data combined with process simulations hold the potential to unveil the convoluted interplay of process parameters on the output product quality parameters. / <p>Related work:</p><p>1) http://urn.kb.se/resolve?urn=urn:nbn:se:bth-14412</p><p>2) http://urn.kb.se/resolve?urn=urn:nbn:se:bth-14388</p><p>3) http://urn.kb.se/resolve?urn=urn:nbn:se:bth-18935</p>
|
96 |
Návrh výroby kotvícího prvku solárního kolektoru / Manufacturing of the anchoring element of a solar collectorSvobodová, Helena January 2017 (has links)
In this master's thesis the proposal of the production technology of component – solar collector anchor element from steel 1.0038 (11 375) quality, 5 mm thickness is solved. For the manufacturing of the assigned part the shearing and bending technology and a progressive forming tool including a suitable forming machine of 8,000 kN rated power is selected. The proposed method of production is laid down by a technical-economic evaluation with respect to the production series of 150,000 units per year. The solar collector anchor element serves to hold the frame for the solar vacuum tube collector. In the scope of this master's thesis, an assessment of the current production method, including the selection of a suitable semi-finished product for production, was also carried out and their optimization was proposed.
|
97 |
Výroba dveřní petlice sdruženým nástrojem / Door latch manufacturing by compound toolPetřek, Pavel January 2011 (has links)
The project drawn up within engineering studies, field M-STG, presents a design for processing a single part – the part is made of sheet steel number S195T by shearing and bending. On the basis of literary study was design compound tool which is working in three steps. The tool is fixed in eccentric press LE 250 with nominal force 25000 kN. Blanking punch and blanking die are made from tool steel 1.2379 according the drawing documentation.
|
98 |
Návrh postupu výroby součástí pro váleček pásového dopravníku / Proposal of the manufacturing procedure for the parts of belt conveyor rollerPavelek, Michal January 2011 (has links)
The project, which has been elaborated within the framework of Master's Degree in Manufacturing Technology (2303T002), processes a technology proposal for the production of stamped part čelo from DD14 material, with a thickness 4 mm, with production quantities of 100 000 pieces per year, in cooperation with the company UNIRON Ltd. Based on the literature study of deep drawing without thinning of the walls and calculations, production of the part of simple single-function drawing tools was proposed. The first three operations performed on a PYE 100 S/1 hydraulic press and the last calibration operation carried out on a LEK 250 eccentric press. The semi-finished product is blank with a diameter of 195 mm, produced in a simple cutting die. The cutting die is designed for both the material in the form of a sheet metal strip in coils and cut strips of metal sheet, which is associated with the use of two eccentric presses of the LEK 250 and LE 400C types. The proposed manufacturing process was simulated in the PAM-Stamp 2G software, in which the influence of the radius the functional parts of tools to change the thickness of the material is further simulated. The part of the project is a technical and economic evaluation, in which the price of one piece of the product and production quantity at which production becomes profitable was rated.
|
99 |
Výroba kotevního prvku / Manufacturing of wall clampŠobáň, Pavel January 2014 (has links)
The wall clamp is used for attaching columns or pillars to a concrete foundation. It is made from structural steel 11 375 in the form of sheets with a thickness of 4 mm in the production run of 150 000 pcs/year. A combination of shearing and bending technologies in a progressive forming tool was selected from various options as the most appropriate. On the basis of structural and technological calculations, an instrument was designed, for which the technical documentation was elaborated. Due to the total forming force and work, the forming machine LDO 800 A/S from Šmeral Brno a.s. was selected as the manufacturing machine. The production cost per one part 53.66 CZK was determined using economic evaluation; based on the break even point, the production becomes profitable for the production run with the minimum number of 13 065 pcs.
|
100 |
Výroba krytu / Production of casingHájek, Pavel January 2014 (has links)
This master’s project describes a proposal for manufacturing technology of a horizontal boring machine case. This case is manufactured by HESTEGO a.s. from a DC01 steel sheet, which is 2 mm thick and its production series is 200 pieces a year. Punching and bending were chosen as the most suitable methods from the considered manufacturing technologies. The theoretical part of the thesis includes a study of the chosen manufacturing technologies. Based on the analysis of the technological calculations and the available tools in the manufacturing company, a technological procedure was designed and these machines were chosen: punching machine TruPunch 5000 a servo-electronic press brake SAFAN E – BRAKE 100–3100. Technical and economical evaluation is also included in the proposal.
|
Page generated in 0.0436 seconds