This thesis describes the design, development, and implementation of a pulsed source of polarization-entangled photons using spontaneous parametric down-conversion in a Sagnac interferometer. A tangle of 0.9286 ± 0.0015, fidelity to the state (|10〉 + |01〉)/√2 of 0.9798 ± 0.0004 and a brightness of 597 pairs/s/mW were demonstrated. Spontaneous parametric down-conversion is a nonlinear optical process in which one photon is split into two lower-frequency photons while conserving momentum and energy, in this experiment nearly degenerate photons are produced. These photons are then interfered at the output beamsplitter of the interferometer, exchanging path entanglement for polarization entanglement and generating the desired polarization-entangled photon pairs.

This thesis describes the design, development, and implementation of a pulsed source of polarization-entangled photons using spontaneous parametric down-conversion in a Sagnac interferometer. A tangle of 0.9286 ± 0.0015, fidelity to the state (|10〉 + |01〉)/√2 of 0.9798 ± 0.0004 and a brightness of 597 pairs/s/mW were demonstrated. Spontaneous parametric down-conversion is a nonlinear optical process in which one photon is split into two lower-frequency photons while conserving momentum and energy, in this experiment nearly degenerate photons are produced. These photons are then interfered at the output beamsplitter of the interferometer, exchanging path entanglement for polarization entanglement and generating the desired polarization-entangled photon pairs.

The reason of the essay research find position of leakage point, and design a fiber optical leakage detection system. The research of fiber optical detection system in past year, because property of structure produce SNR smaller, quality of detection system is too bed. The essay brings to a hybrid Mach-Zehnder & Sagnac interferomtric can improve the SNR to 10dB. Therefore, it provides the better SNR. The experiment is added to signal process, such as PTL, PGC structure. To provide the systematic characteristic, such as dynamic range(60dB), percentage error(0.025%). The focal of the essay provide leak detection systematic characteristics how we make use of signal process.

The main frame of the distributed fiber optic leak detection system adopted the hybrid Mach-Zehnder & Sagnac interferomtric. We use the sensing fiber of In-Line frame to detect leak physical field. We can measure the position of the leak physical field through our sensing system and signal process system. In the cause of improving detective ability of leak detection system, we modify three elements of the system, including (1) the choice of the acoustic response of sensing fiber, (2) modification of the PZT phase modulator, and (3) modification of the PGC demodulator. The frame of our experiment is composed of the distributed fiber optic leak detection system and leak system of the fluid pipes. In which leak system of fluid pipes is designed the leaky frame of high-pressure fluid pipes. The main of experiment introduce the leak detection system to measure the leak acoustics of the fluid pipes. Then we can discuss the experimental result. The measurable minimum range of our distributed fiber optic leak detection system is3.3x10^-4(rad/¡ÔHz), and the dynamic range is above 75 dB. The dynamic range of this system can improve the original system to above 15 dB.

The aim of this project was to develop a passive optical compensating arrangement that would allow the formation and continued stability of interference patterns over a long timescale and also to investigate optical wave scattering in thick gratings at extreme angles of scattering. A novel passive arrangement based on a Sagnac interferometer is described that produces interference patterns more stable than those produced by a conventional arrangement. An analysis of the arrangement is presented that shows it to be an order of magnitude more stable than an equivalent conventional approach. The excellent fringe stability allowed holographic gratings with small periods (~ 0.5 μm) to be written in photorefractive lithium niobate with low intensity writing fields (~mW/cm2) produced by a He:Ne laser, despite long grating fabrication times (~ 1000 s). This was possible because the optical arrangement compensated for phase shifts introduced by translational and rotational mirror motion caused by environmental perturbations. It was shown that the rapid introduction of a phase shift in one of the writing fields can change the direction of energy flow in the two-wave mixing process. It was found that the improvement in stability of the modified Sagnac arrangement over a conventional interferometer decreased when the crossing angle was increased and that the point about which the mirrors are rotated greatly affects the stability of the arrangement. For a crossing angle of 12 degrees, the modified Sagnac arrangement is more than twice as stable when the mirrors are rotated about their midpoints, rather than their endpoints. Investigations into scattering in the extremely asymmetrical scattering (EAS) geometry were undertaken by scattering light from a 532nm Nd:YAG laser off gratings written in photorefractive barium titanate and lithium niobate. Despite the difficulties posed by background noise, there was very good agreement between the observed scattered field and that predicted by a previously established theoretical model. Thus, this work represents the first experimental observation of EAS in the optical part of the spectrum.

Este trabalho abordará uma breve descrição de fenômenos óticos não lineares, apresentando resultados de caracterização ótica não linear para diferentes materiais, assim como resultados para uma nova técnica de caracterização. Serão apresentados aspectos básicos de determinação do índice de refração não linear através da técnica de varredura Z que é um método bem estabelecido e amplamente difundido. Esta técnica porém não é eficiente para filmes finos e amostras com baixa não linearidade. Com a utilização de uma montagem interferométrica é possível gerar um crescimento na sensibilidade da técnica, atenuando o oscilador local sem nenhuma perda no sinal não linear gerado, acarretando em uma melhoria da relação sinal-ruído. / An introduction to nonlinear optics will be addressed in this work, presenting results of optical characterization to many different materials as well as results from a new characterization technique. Basic aspects to nonlinear index refraction measurement will be presented through Z-scan, which is a well-established method. This technique is not efficient for thin films or samples presenting low nonlinearity. Using a interferometric setup is possible to produce an increase in sensibility, attenuanting local oscillator without degrading the generated nonlinear signal, what establishes a better signal-noise relation.

Este trabalho abordará uma breve descrição de fenômenos óticos não lineares, apresentando resultados de caracterização ótica não linear para diferentes materiais, assim como resultados para uma nova técnica de caracterização. Serão apresentados aspectos básicos de determinação do índice de refração não linear através da técnica de varredura Z que é um método bem estabelecido e amplamente difundido. Esta técnica porém não é eficiente para filmes finos e amostras com baixa não linearidade. Com a utilização de uma montagem interferométrica é possível gerar um crescimento na sensibilidade da técnica, atenuando o oscilador local sem nenhuma perda no sinal não linear gerado, acarretando em uma melhoria da relação sinal-ruído. / An introduction to nonlinear optics will be addressed in this work, presenting results of optical characterization to many different materials as well as results from a new characterization technique. Basic aspects to nonlinear index refraction measurement will be presented through Z-scan, which is a well-established method. This technique is not efficient for thin films or samples presenting low nonlinearity. Using a interferometric setup is possible to produce an increase in sensibility, attenuanting local oscillator without degrading the generated nonlinear signal, what establishes a better signal-noise relation.

Este trabalho abordará uma breve descrição de fenômenos óticos não lineares, apresentando resultados de caracterização ótica não linear para diferentes materiais, assim como resultados para uma nova técnica de caracterização. Serão apresentados aspectos básicos de determinação do índice de refração não linear através da técnica de varredura Z que é um método bem estabelecido e amplamente difundido. Esta técnica porém não é eficiente para filmes finos e amostras com baixa não linearidade. Com a utilização de uma montagem interferométrica é possível gerar um crescimento na sensibilidade da técnica, atenuando o oscilador local sem nenhuma perda no sinal não linear gerado, acarretando em uma melhoria da relação sinal-ruído. / An introduction to nonlinear optics will be addressed in this work, presenting results of optical characterization to many different materials as well as results from a new characterization technique. Basic aspects to nonlinear index refraction measurement will be presented through Z-scan, which is a well-established method. This technique is not efficient for thin films or samples presenting low nonlinearity. Using a interferometric setup is possible to produce an increase in sensibility, attenuanting local oscillator without degrading the generated nonlinear signal, what establishes a better signal-noise relation.

Submitted by Fabio Sobreira Campos da Costa (fabio.sobreira@ufpe.br) on 2017-02-15T13:05:07Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Compressão de Ruído Quantico em um Interferometro Sagnac em Fibra com um Laser Pulsado em 1,55 Microns - Dissertação de Mestrado em Física - Lucero Plazas Ortega.pdf: 7191693 bytes, checksum: 4eba611a9cee045f7f06747bb63a80cb (MD5) / Made available in DSpace on 2017-02-15T13:05:07Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) Compressão de Ruído Quantico em um Interferometro Sagnac em Fibra com um Laser Pulsado em 1,55 Microns - Dissertação de Mestrado em Física - Lucero Plazas Ortega.pdf: 7191693 bytes, checksum: 4eba611a9cee045f7f06747bb63a80cb (MD5) Previous issue date: 2015-02-24 / CAPES / Componentesemquadraturadocampoeletromagn´eticoobedecemaoprincipio de incerteza de Heisenberg. Como resultado a Mecˆanica Quˆantica prevˆe que estas componentes n˜ao podem ser especificadas simultaneamente com precis˜ao ilimitada. Estados de incerteza m´ınima (estados coerentes) permitem atingir o menor produto das incertezas em cada quadratura, ambas de mesma magnitude. Al´em disto ´e poss´ıvel construir estados quˆanticos comprimidos, para os quais uma das suas quadraturas atinge um valor menor para o desvio padr˜ao queaqueledefinidoparaumestadodem´ınimaincerteza,incrementandoconsequentemente a incerteza na outra quadratura. Nesta disserta¸c˜ao fazemos uma revis˜ao destes conceitos e apresentamos um esquema experimental com o qual geramosestadoscomprimidos(squeezedstates)daradia¸c˜ao. Este´ebaseadoem umlaserdefibrapulsado(comprimentodeondaλ = 1.56µm, taxaderepeti¸c˜ao fR = 146MHz, largura de pulso τp = 200fs) associado a um interferˆometro de Sagnac n˜ao linear em fibra. Al´em de uma descri¸c˜ao dos principais componentes ´opticos ser˜ao discutidos os mecanismos de gera¸c˜ao e caracteriza¸c˜ao dos estados comprimidos. / QuadraturecomponentsofthefieldobeyaHeisenberguncertaintyrelation. As a result, quantum mechanics predicts that these components cannot be specified simultaneously with unlimited accuracy. Minimum uncertainty states or coherent states, allow reaching the lowest value of the uncertainty in each quadrature component, both having the same magnitude. It is still possible to construct squeezed quantum states, for which, one of its quadrature components achieves a less value for standard deviation than one that have a state of minimum uncertainty, with the consequence of an increase in the uncertainty of the other quadrature. In this dissertation, these concepts are reviewed and we provide an experimental scheme in order to generate squeezed states of light. This design is based on a pulsed fiber laser (λ = 1.56µm, repetition rate fR = 146MHz, pulse width τp = 200fs) coupled with a nonlinear interferometer, which is composed by a fiber loop in a Sagnac configuration. In order to discuss the experimental results obtained with this scheme, will be carried out adescriptionofthemainopticalcomponents,takingintoaccounttheprincipal mechanisms of generating and measuring of squeezed states.

In this thesis we investigate advanced techniques for the readout and control of various interferometers. In particular, we present experimental investigations of interferometer configurations and control techniques to be used in second generation interferometric gravitational wave detectors. We also present a new technique, tilt locking, for the readout and control of optical interferometers. ¶ We report the first experimental demonstration of a Sagnac interferometer with resonant sideband extraction (RSE). We measure the frequency response to modulation of the length of the arms and demonstrate an increase in signal bandwidth of by a factor of 6.5 compared to the Sagnac with arm cavities only. We compare Sagnac interferometers based on optical cavities with cavity-based Michelson interferometers and find that the Sagnac configuration has little overall advantage in a cavity-based system. ¶ A system for the control and signal extraction of a power recycled Michelson interferometer with RSE is presented. This control system employs a frontal modulation scheme requiring a phase modulated carrier field and a phase modulated subcarrier field. The system is capable of locking all 5 length degrees of freedom and allows the signal cavity to be detuned over the entire range of possibilities, in principle, whilst maintaining lock. We analytically investigate the modulation/demodulation techniques used to obtain these error signals, presenting an introductory explanation of single sideband modulation/demodulation and double demodulation. ¶ This control system is implemented on a benchtop prototype interferometer. We discuss technical problems associated with production of the input beam modulation components and present several solutions. Operation of the interferometer is demonstrated for a wide range of detunings. The frequency response of the interferometer is measured for various detuned points and we observe good agreement with theoretical predictions. The ability of the control system to maintain lock as the interferometer is detuned is experimentally demonstrated. ¶ Tilt locking, a new technique to obtain an error signal to lock a laser to an optical cavity, is presented. This technique produces an error signal by efficient measurement of the interference between the TEM00 and TEM10 modes. We perform experimental and theoretical comparisons with the widely used Pound-Drever-Hall (PDH) technique. We derive the quantum noise limit to the sensitivity of a measurement of the beam position, and using this result calculate the shot noise limited sensitivity of tilt locking. We show that tilt locking has a quantum efficiency of 80%, compared to 82% for the PDH technique. We present experimental demonstrations of tilt locking in several applications including frequency stabilisation, continuous-wave second harmonic generation, and injection locking of a Nd:YAG slab laser. In each of these cases, we demonstrate that the performance of tilt locking is not the limiting factor of the lock stability, and show that it achieves similar performance to the PDH based system. ¶ Finally, we discuss how tilt locking can be effectively applied to two beam interferometers. We show experimentally how a two beam interferometer typically gives excellent isolation against errors arising from changes in the photodetector position, and experimentally demonstrate the use of tilt locking as a signal readout system for a Sagnac interferometer.