Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2017-03-17T19:32:33Z No. of bitstreams: 1 JoseEdenilsonOliveiraReges_TESE.pdf: 5841325 bytes, checksum: 2ead9ffcd013a5ed21850074ab97c30f (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2017-03-18T00:04:04Z (GMT) No. of bitstreams: 1 JoseEdenilsonOliveiraReges_TESE.pdf: 5841325 bytes, checksum: 2ead9ffcd013a5ed21850074ab97c30f (MD5) / Made available in DSpace on 2017-03-18T00:04:04Z (GMT). No. of bitstreams: 1 JoseEdenilsonOliveiraReges_TESE.pdf: 5841325 bytes, checksum: 2ead9ffcd013a5ed21850074ab97c30f (MD5) Previous issue date: 2016-11-18 / Esta Tese ? uma contribui??o ao desenvolvimento de sensores de vaz?o na ind?stria de petr?leo e g?s. O objetivo geral do trabalho ? apresentar uma metodologia para medir as vaz?es em po?os injetores de ?gua multizonas a partir de perfis de temperatura do fluido e estimar a incerteza da medi??o. Inicialmente, foi apresentada a equa??o cl?ssica de Ramey descrevendo a temperatura do fluido como uma fun??o da vaz?o ao longo do po?o. Ent?o, foram descritos tr?s m?todos de c?lculo das vaz?es a partir do perfil de temperatura e o sensor de vaz?o foi modelado computacionalmente. Em seguida, foram calculadas as vaz?es em quatro po?os injetores multizonas, localizados no Rio Grande do Norte, a partir de perfis de temperatura medidos experimentalmente. As vaz?es calculadas foram comparadas ?s vaz?es medidas no campo. Os resultados preliminares obtidos nos Po?os 1 e 2 foram satisfat?rios. Nestes po?os, os erros m?ximos observados foram de 28,55% (Po?o 1) e 15,72% (Po?o 2). Entretanto, desvios significativos entre as vaz?es calculadas e medidas foram encontrados nos Po?os 3 e 4. Nestes po?os, os erros m?ximos observados foram de 536,84% (Po?o 3) e 335,54% (Po?o 4). Utilizando a expans?o em S?rie de Taylor da equa??o exponencial de Ramey, foi obtida uma fun??o expl?cita, linear, entre a vaz?o ao longo do po?o e a temperatura do fluido, sendo realizada uma an?lise quantitativa da incerteza de medi??o. A partir desta an?lise, foi observado que, devido ? baixa resolu??o nas medi??es de temperatura, a incerteza de medi??o expandida pode atingir cerca de 155,04% da vaz?o calculada. Foi ent?o apresentado um m?todo de c?lculo estoc?stico das vaz?es a partir das distribui??es de probabilidade das temperaturas medidas, atrav?s da Simula??o de Monte Carlo. As novas vaz?es calculadas apresentaram erros m?ximos de 3,67% (Po?o 1), 14,45% (Po?o 2), 14,62% (Po?o 3) e 22,29% (Po?o 4). Logo, a abordagem probabil?stica permitiu que as vaz?es injetadas fossem satisfatoriamente estimadas mesmo nos casos em que a resolu??o do sensor de temperatura era inadequada ? detec??o de pequenas varia??es na temperatura do fluido. Portanto, a metodologia de c?lculo das vaz?es injetadas a partir do perfil de temperatura do fluido foi validada com sucesso. / This thesis is a contribution to the development of flow sensors in oil and gas industry. The main objective of this work is presenting a methodology to measure the flow rates into multiple-zone water-injection wells from fluid temperature profiles and estimate the measurement uncertainty. First, the classical Ramey equation describing the fluid temperature as a function of flow was presented. Then, three methods to calculate the flow rates from temperature profile were described and the flow sensor was computationally modeled. Next, the flow rates into four multiple-zone injection-wells, located in Rio Grande do Norte, were calculated from temperature profiles experimentally measured. The calculated flow rates were compared to the measured flow rates. The preliminary results, obtained from Wells 1 and 2, were satisfactory. In these wells, the maximum errors were equals to 28,55% (Well 1) and 15,72% (Well 2). However, significant deviations between the calculated and the measured flow rates were found at Wells 3 and 4. In these wells, the maximum errors were equals to 536,84% (Well 3) and 335,54% (Well 4). The Ramey equation was expanded in Taylor Series and linearized to obtain an explicit, linear, function between the flow and the fluid temperature. Then, a quantitative uncertainty analysis was performed. From this analysis, it was observed, due the temperature sensor resolution, the expanded measurement uncertainty may achieve about 155,04% of the calculated flow rate. Then, the injected flow rates were stochastically recalculated from the probability distributions of the measured temperatures, through a Monte Carlo simulation. The new calculated flow rates presented maximum errors of 3,67% (Well 1), 14,45% (Well 2), 14,62% (Well 3) and 22,29% (Well 4). This probabilistic approach allowed injected flow rates to be estimated even in the cases where the temperature sensor resolution was inadequate to detection of small variations into the fluid temperature. Therefore, the methodology to calculate the injected flow rates from the fluid temperature profile was successfully validated.

Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2017-10-18T20:55:14Z No. of bitstreams: 1 WendellRossineMedeirosDeSouza_TESE.pdf: 7150800 bytes, checksum: 939215abfa16589e581080cb1d3e85f5 (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2017-10-24T23:17:21Z (GMT) No. of bitstreams: 1 WendellRossineMedeirosDeSouza_TESE.pdf: 7150800 bytes, checksum: 939215abfa16589e581080cb1d3e85f5 (MD5) / Made available in DSpace on 2017-10-24T23:17:22Z (GMT). No. of bitstreams: 1 WendellRossineMedeirosDeSouza_TESE.pdf: 7150800 bytes, checksum: 939215abfa16589e581080cb1d3e85f5 (MD5) Previous issue date: 2017-05-30 / A exposi??o dos po?os de petr?leo a condi??es extremas os tem levado a in?meros problemas de integridade, mesmo quando projetados adequadamente. O uso de t?cnicas de recupera??o, tal como a inje??o c?clica de vapor, submete os materiais a varia??es de temperatura severas reduzindo a vida ?til do po?o; ainda, podendo levar ? falha do revestimento met?lico e da bainha de cimento. A perda da integridade da bainha de cimento pode acarretar no vazamento dos fluidos presentes na forma??o e, em alguns casos, ocasionando significantes preju?zos ambientais e econ?micos. No caso de po?os sujeitos ? inje??o c?clica de vapor, a resist?ncia, a flexibilidade e as propriedades t?rmicas t?m sido apontadas como chave do problema. Neste trabalho, as an?lises termomec?nicas foram realizadas utilizando o m?todo dos elementos finitos em modo transiente. O revestimento met?lico, a bainha de cimento e a forma??o foram modelados utilizando-se um modelo 2D axissim?trico com elementos quadril?teros de 8 n?s. Foi analisado o comportamento mec?nico de bainha de cimento, sendo tr?s formula??es de pastas estudadas: pasta de refer?ncia e mais duas aditivadas com l?tex em concentra??es de 125 e 250 ml/kg de cimento. A influ?ncia da espessura da bainha de cimento e a taxa de aquecimento foram observadas como tamb?m seis diferentes valores de coeficientes de expans?o t?rmica para pasta de cimento. Foram analisados gradientes de temperaturas distintos de 150 oC, 200 oC, 250 oC, 300 oC e 350 oC, t?picas temperaturas encontradas no processo de inje??o de vapor, bem como em meio a forma??es com v?rios n?veis de rigidez. O estudo evidenciou que um dos problemas da integridade da bainha de cimento devido a inje??o de vapor est? associado a fase de aquecimento do po?o e localizado na regi?o da bainha pr?ximo ? forma??o. Foi constatado que vincular o emprego da formula??o mais flex?vel e expansiva a uma aplica??o do gradiente de temperatura de modo mais lento, pode prevenir o surgimento de danos na bainha de cimento evitando manobras de recimenta??o. Tal procedimento se mostrou eficaz para meios rochosos mais r?gidos bem como para temperaturas alvo mais elevadas. / Exposure of oil wells to extreme conditions has led to numerous integrity issues, even when designed properly. The use of recovery techniques, such as the cyclic steam injection, submits the materials to severe temperature variations, reducing the oil well lifespan; and may lead to failure of the steel casing and cement sheath. The loss of integrity of the cement sheath may lead to leakage of the fluids present in the formation and, in some cases, causing significant environmental and economic damages. In the case of wells subjected to the cyclic steam injection, resistance, flexibility and thermal properties have been identified as the key to the problem. In the present work, thermomechanical analyzes were performed using the finite element method in transient mode. The steel casing, the cement sheath and the formation were modeled using an axisymmetric 2D model with 8-node quadrilateral elements. The mechanical behavior of the cement sheath was analyzed, being three formulations of pastes studied: reference paste and two other paste with latex additives in concentrations of 125 and 250 ml / kg of cement. The influence of the cement sheath thickness and the heating rate were observed as well as six different coefficient values of thermal expansion for cement paste. It was analyzed the temperature gradients of 150 oC, 200 oC, 250 oC, 300 oC and 350 oC, typical temperatures encountered during the steam injection process, as well as between formations with various levels of rigidity. The study revealed that one of the problems of cement sheath integrity due to steam injection is associated with the heating phase of the well and located in the region of the sheath near the formation. It has been found that linking the use of the more flexible and expansive formulation to an extending temperature gradient period application may prevent damage to the cement sheath by avoiding recementing maneuvers. Such a procedure proved to be effective for more rigid rock media as well as for higher target temperatures.

Made available in DSpace on 2014-12-17T14:07:00Z (GMT). No. of bitstreams: 1 MariaDMP_pre_textuais_ate_cap_3.pdf: 1552357 bytes, checksum: 286c69a88a6d2c4ec8689ee9514da8ec (MD5) Previous issue date: 2008-10-28 / Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21? for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204?F (400?C) and geopolymeric slurries are viable above 500?F (260?C) / Po?os sujeitos ? inje??o c?clica de vapor apresentam importantes desafios para desenvolvimento de pastas de cimenta??o, devido principalmente aos esfor?os de tra??o causados pelos gradientes t?rmicos durante a sua vida ?til. Falhas em cimenta??es que empregaram pastas convencionais de elevada resist?ncia ? compress?o levaram ao emprego de pastas mais flex?veis e/ou d?cteis, com destaque para as pastas de cimento Portland com adi??o de l?tex. Recentes pesquisas t?m apresentado pastas geopolim?ricas como alternativa. Estas pastas cimentantes s?o baseadas na ativa??o alcalina de aluminosilicatos amorfos como o metacaulim ou a cinza volante e possuem propriedades vantajosas como alta resist?ncia ? compress?o, r?pido endurecimento e estabilidade t?rmica. Encontram-se na literatura formula??es geopolim?ricas b?sicas que atendem ?s especifica??es da ind?stria de petr?leo, incluindo reologia, resist?ncia ? compress?o e tempo de espessamento. Neste trabalho, desenvolveu-se novas formula??es geopolim?ricas ? base de metacaulim, silicato de pot?ssio, hidr?xido de pot?ssio, micross?lica e fibra mineral, utilizando o estado da arte em composi??o qu?mica, modelagem de misturas e aditiva??o para otimizar as propriedades relevantes para a cimenta??o de po?os. Partindo de raz?es molares consideradas ideais na literatura (SiO2/Al2O3 = 3,8 e K2O/Al2O3 = 1,0), realizou-se um estudo de misturas secas baseado no modelo do empacotamento compress?vel, obtendo-se um volume ?timo de 6% para o material s?lido adicional. Este material (micross?lica e fibra mineral) serve tanto como fonte de s?lica adicional (no caso da micross?lica) quanto refor?o mec?nico, principalmente no caso da fibra mineral, a qual incrementou a resist?ncia ? tra??o. Realizou-se o primeiro estudo mec?nico triaxial desta classe de pastas. Para efeito de compara??o, tamb?m foi realizado um estudo mec?nico de pastas convencionais ? base de l?tex. Apesar de diferen?as no modo de ruptura (fr?gil no caso dos geopol?meros, d?ctil no caso das pastas com l?tex), a superior resist?ncia compressiva uniaxial (37 MPa para a pasta geopolim?rica P5 versus 18 MPa para a pasta convencional P2), comportamento triaxial similar (?ngulo de atrito 21? para P5 e P2) e menor rigidez (na regi?o el?stica 5,1 GPa para P5 versus 6,8 GPa para P2) das pastas geopolim?ricas permitiu uma capacidade de absor??o de energia (155 kJ/m3 para P5 versus 208 kJ/m3 para P2) compar?vel entre as duas, sendo que os geopol?meros atuam no regime el?stico, sem a microfissura??o presente nas pastas com l?tex. Assim, os geopol?meros estudados neste trabalho devem ser dimensionados para aplica??es no regime el?stico para evitar fraturas fr?geis. Finalmente, a resist?ncia ? tra??o do geopol?mero ? originalmente pobre (1,3 MPa para a pasta geopolim?rica P3) devido ? sua estrutura fr?gil. Entretanto, ap?s a aditiva??o desse sistema com fibra mineral, a resist?ncia ? tra??o do mesmo tornou-se equivalente (2,3 MPa para P5 e 2,1 MPa para P2) ? das pastas com l?tex. A viabilidade t?cnica das formula??es convencionais e geopolim?ricas foi avaliada durante toda a vida ?til do po?o, incluindo os esfor?os devidos ? inje??o c?clica de vapor. Esta an?lise foi feita utilizando um software de simula??o ? base de elementos finitos. Verificou-se que as pastas convencionais s?o vi?veis at? a temperatura de 204?C (400?F) e as geopolim?ricas acima de 260?C (500?F)

Made available in DSpace on 2014-12-17T14:08:32Z (GMT). No. of bitstreams: 1 RicardoWO.pdf: 3213751 bytes, checksum: 8d8983eff6f68357e2e660b4041a5b84 (MD5) Previous issue date: 2009-03-19 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / In the present study we elaborated algorithms by using concepts from percolation theory which analyze the connectivity conditions in geological models of petroleum reservoirs. From the petrophysical parameters such as permeability, porosity, transmittivity and others, which may be generated by any statistical process, it is possible to determine the portion of the model with more connected cells, what the interconnected wells are, and the critical path between injector and source wells. This allows to classify the reservoir according to the modeled petrophysical parameters. This also make it possible to determine the percentage of the reservoir to which each well is connected. Generally, the connected regions and the respective minima and/or maxima in the occurrence of the petrophysical parameters studied constitute a good manner to characterize a reservoir volumetrically. Therefore, the algorithms allow to optimize the positioning of wells, offering a preview of the general conditions of the given model s connectivity. The intent is not to evaluate geological models, but to show how to interpret the deposits, how their petrophysical characteristics are spatially distributed, and how the connections between the several parts of the system are resolved, showing their critical paths and backbones. The execution of these algorithms allows us to know the properties of the model s connectivity before the work on reservoir flux simulation is started / No presente estudo foram elaborados algoritmos, utilizando conceitos da teoria da percola??o, que analisam as condi??es de conectividade em modelos geol?gicos elaborados para reservat?rios de petr?leo. A partir de seus par?metros petrof?sicos, tais como: permeabilidade, porosidade, transmissibilidade e outros, gerados por qualquer processo estat?stico, ? poss?vel conhecer qual a por??o do modelo onde ocorre o maior n?mero de c?lulas conectadas, quais s?o os po?os que est?o conectados entre si e qual o caminho m?nimo entre injetores e produtores. Permitindo, assim, classificar o reservat?rio segundo os par?metros petrof?sicos modelados. Podendo determinar, tamb?m, qual a porcentagem do reservat?rio a que cada po?o est? conectado. De uma forma geral, as regi?es conectadas e os respectivos m?nimos e/ou m?ximos da ocorr?ncia dos par?metros petrof?sicos estudados, constituem uma boa forma de caracterizar volumetricamente um reservat?rio. Os algoritmos permitem, ent?o, otimizar o posicionamento de loca??es de po?os oferecendo uma vis?o antecipada das condi??es gerais da conectividade de um determinado modelo. A inten??o n?o ? avaliar modelos geol?gicos, mas mostrar como as jazidas s?o interpretadas, como suas caracter?sticas petrof?sicas se distribuem espacialmente e como as conex?es entre as diversas partes do sistema s?o resolvidas, mostrando seus caminhos cr?ticos e backbones . A execu??o desses algoritmos permite que as caracter?sticas relativas ? conectividade do modelo sejam conhecidas mesmo antes de se iniciar o trabalho de simula??o de fluxo do reservat?rio

Made available in DSpace on 2014-12-17T14:08:54Z (GMT). No. of bitstreams: 1 HumbertoSC_DISSERT.pdf: 7792135 bytes, checksum: 5204c60825f60e9f74c5f24e46e8aa4e (MD5) Previous issue date: 2013-07-29 / Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300?C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves / Aproximadamente 3 x 1011 m3 de ?leos m?dios e leves restar?o nos reservat?rios ao redor do mundo ap?s a aplica??o dos m?todos convencionais de recupera??o e grande parte desse volume seria recuper?vel com o uso de m?todos especiais. A combust?o in-situ (CIS) ? um m?todo de recupera??o avan?ada de petr?leo no qual um g?s que cont?m oxig?nio ? injetado no reservat?rio onde reage com o ?leo cru para criar uma frente de combust?o de alta temperatura que se propaga pelo reservat?rio. O m?todo HPAI (High Pressure Air Injection) ? uma denomina??o particular do processo de inje??o de ar aplicado em reservat?rios de ?leos leves, onde as rea??es de combust?o s?o dominantes entre 150 e 300?C e a gera??o de flue gas ? o principal fator de deslocamento do ?leo. Um modelo de simula??o de fluxo de um reservat?rio homog?neo foi constru?do para o estudo, o qual foi inicialmente submetido ? produ??o prim?ria, por 3 anos, e em seguida, ao processo de inje??o de ?gua por mais 21 anos. Nesse ponto, com a condi??o madura estabelecida no reservat?rio, foram selecionadas tr?s varia??es desse modelo, de acordo com o fator de recupera??o (FR) obtido, para o estudo da t?cnica de combust?o in-situ (HPAI). Em seguida realizou-se uma an?lise de sensibilidade sobre o FR de par?metros operacionais pr?prios do m?todo: vaz?o de inje??o de ar por po?o, concentra??o de oxig?nio no g?s injetado, esquema de inje??o de ar e configura??o dos canhoneados dos po?os. Essa an?lise, para um per?odo adicional de at? 10 anos produ??o, foi efetuada com o aux?lio da t?cnica de planejamento composto central. O comportamento do reservat?rio e os impactos de par?metros envolvendo as rea??es qu?micas e de particularidades de reservat?rio sobre o FR tamb?m foram avaliados. Adicionalmente foram elaborados uma an?lise econ?mica e um estudo de maximiza??o do FR do processo. As simula??es foram realizadas com o simulador de processos t?rmicos em reservat?rios STARS (Steam, Thermal and Advanced Process Reservoir Simulation) da CMG (Computer Modelling Group). Os resultados mostraram que os FR incrementais foram baixos e que o valor presente l?quido (VPL) ? impactado negativamente pelos elevados investimentos iniciais para compress?o do ar. Observou-se que a ado??o de maiores concentra??es de oxig?nio no g?s injetado e do esquema de inje??o de ar tipo five spot tende a favorecer o FR, e que a configura??o dos canhoneados dos po?os apresenta influ?ncia crescente com o aumento da espessura porosa com ?leo do reservat?rio. Casos simulados referentes ?s particularidades de reservat?rio indicaram que menores satura??es residuais de ?leo ao g?s levam a FR maiores e que a exist?ncia de heterogeneidades resulta em varia??es consider?veis nos FR e nas curvas de produ??o

Made available in DSpace on 2015-03-13T17:08:40Z (GMT). No. of bitstreams: 1 ClenubioFS.pdf: 1330843 bytes, checksum: f44365144a87dbadb85a95129360dfdc (MD5) Previous issue date: 2006-10-09 / The northern coast of Rio Grande do Norte State (RN) shows areas of Potiguar basin with high activity in petroleum industry. With the goal of avoiding and reducing the accident risks with oil it is necessary to understand the natural vulnerability, mapping natural resources and monitoring the oil spill. The use of computational tools for environmental monitoring makes possible better analyses and decisions in political management of environmental preservation. This work shows a methodology for monitoring of environment impacts, with purpose of avoiding and preserving the sensible areas in oil contact. That methodology consists in developing and embedding an integrated computational system. Such system is composed by a Spatial Decision Support System (SDSS). The SDSS shows a computational infrastructure composed by Web System of Geo-Environmental and Geographic Information - SWIGG , the System of Environmental Sensibility Maps for Oil Spill AutoMSA , and the Basic System of Environmental Hydrodynamic ( SisBAHIA a System of Modeling and Numerical Simulating SMNS). In a scenario of oil spill occurred coastwise of Rio Grande do Norte State s northern coast, the integration of such systems will give support to decision agents for managing of environmental impacts. Such support is supplied through a system of supporting to spatial decisions / O litoral norte do Estado do Rio Grande do Norte (RN) apresenta ?reas da bacia Potiguar com intensa atividade da ind?stria petrol?fera. Com a finalidade de prevenir e minimizar os riscos de acidentes com ?leo, faz-se necess?rio compreender a vulnerabilidade natural, mapear os recursos naturais e monitorar os derrames de ?leo. O uso de ferramentas computacionais para o monitoramento ambiental, possibilita uma melhor an?lise e tomada de decis?o no planejamento de pol?ticas de conserva??o ambiental. A presente disserta??o apresenta uma metodologia de trabalho para o monitoramento de impactos ambientais, com o prop?sito de avaliar e proteger as regi?es sens?veis ao contato do ?leo. A metodologia consiste em desenvolver e implantar um sistema integrado, constituindo um Sistema de Apoio ? Decis?o Espacial (SADE). O SADE apresenta uma infra-estrutura computacional composta pelo SWIGG (Sistema Web de Informa??es Geogr?ficas e Geoambientais), o AutoMSA (Automatizador de Mapas de Sensibilidade Ambiental para derramamentos de ?leo) e o Sistema BAse de HIdrodin?mica Ambiental (SisBAHIA um Sistema de Modelagem e Simula??o Num?rica - SMSN). Num cen?rio de derramamento de ?leo ocorrido pr?ximo ?s ?reas costeiras do litoral norte do Estado do RN a integra??o destes sistemas disponibilizar? aos agentes respons?veis pelo gerenciamento dos danos ambientais, um sistema de suporte a tomada de decis?o espacial

Made available in DSpace on 2014-12-17T14:58:12Z (GMT). No. of bitstreams: 1 ElsonANM.pdf: 918866 bytes, checksum: 54ffb16de332a5a9c76c3afd577bcea1 (MD5) Previous issue date: 2005-09-16 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / The study of aerodynamic loading variations has many engineering applications, including helicopter rotor blades, wind turbines and turbo machinery. This work uses a Vortex Method to make a lagrangian description of the a twodimensional airfoil/ incident wake vortex interaction. The flow is incompressible, newtonian, homogeneus and the Reynolds Number is 5x105 .The airfoil is a NACA 0018 placed a angle of attack of the 0? and 5?simulates with the Painel Method with a constant density vorticity panels and a generation poit is near the painel. The protector layer is created does not permit vortex inside the body. The vortex Lamb convection is realized with the Euler Method (first order) and Adans-Bashforth (second order). The Random Walk Method is used to simulate the diffusion. The circular wake has 366 vortex all over positive or negative vorticity located at different heights with respect to the airfoil chord. The Lift was calculated based in the algorithm created by Ricci (2002). This simulation uses a ready algorithm vatidated with single body does not have a incident wake. The results are compared with a experimental work The comparasion concludes that the experimental results has a good agrement with this papper / Este estudo simula numericamente, atrav?s do M?todo de V?rtices, a intera??o entre uma nuvem de circula??o incidente e um aerof?lio NACA 0018 posicionado com ?ngulos de ataque de 0? e 5?. O n?mero de Reynolds utilizado ? de 5x105 e o escoamento ? considerado incompress?vel. Devido a complexidade do fen?meno de geometria tridimensional, apenas uma se??o do aerof?lio ? simulada transformando o trabalho em bidimensional. Utiliza-se o M?todo dos Pain?is com vorticidades distribu?das para simular o corpo e o ponto de gera??o de vorticidade ? deslocado da superf?cie do painel. Uma camada protetora ? criada para evitar a entrada de v?rtices no corpo. A convec??o dos v?rtices de Lamb presentes ? realizada atrav?s dos esquemas de Euler (1?ordem) e de Adams-Bashforth (2?ordem). A difus?o utiliza o M?todo do Avan?o Rand?mico. As cargas de sustenta??o s?o calculadas atrav?s de um algoritmo desenvolvido por Ricci (2002). A nuvem utilizada tem 366 v?rtices com circula??o de +0.001375692 ou -0.001375692 formando um c?rculo de raio 0,2. A simula??o utilizou um algoritmo existente que foi modificado para o problema em quest?o. Validado atrav?s da simula??o do perfil sem a presen?a da nuvem. Os resultados encontrados mostram uma boa concord?ncia com os encontrados em trabalhos experimentais