Este trabalho tem como proposta desenvolver um difusor aerodinâmico compacto para uma turbina eólica de pequena escala, objetivando alcançar um melhor start rotacional (menor torque de partida para rotacionar) em baixas velocidades de vento. Um difusor é uma estrutura em forma de aro envolta ao rotor da turbina eólica, sua função é amplificar a captação e aceleração do vento, explorando os efeitos aerodinâmicos das zonas de vórtices de baixa pressão na saída do difusor. O estudo concentrar-se-á na manipulação da geometria dos difusores, analisando como seu design impacta no seu comportamento aerodinâmico impacta na capacidade do difusor equacionar as zonas de alta e baixa pressão ao longo de sua estrutura, essa relação é determinante para o efeito aerodinâmico que acelera o escoamento de ar, resultando em um start rotacional em baixas velocidade de vento. O ponto de partida para este trabalho são os estudos desenvolvidos por Ohya et al. (2010) sobre difusores compactos-flangeados (compact-type brimmed diffuser) para turbinas eólicas, denominado Wind-lens Technology. Para alcançar os objetivos, esta pesquisa vai utilizar simulações por CFD com software de túnel de vento virtual e ensaios experimentais em túnel de vento físico para avaliar o comportamento dinâmico (turbina + difusor). Foram desenvolvidas dezenove geometrias a partir de uma área construtiva padronizada para o design de difusores. Desenvolveu-se também, a partir dos resultados encontrados, um MFI (microseparador de fluxo interno), que consiste em uma estrutura adicional com função de potencializar as zonas de vórtices (baixa pressão) no plano de saída do escoamento de ar dos difusores. Os resultados mostraram que a manipulação da geometria do difusor produziu resultados promissores em comparação com o modelo de referência, alcançando em algumas geometrias de difusores um melhor start rotacional. O MFI mostrou-se eficaz para potencializar as zonas de baixa pressão e melhorou o start rotacional. Ao final, definiu-se dois modelos de difusores e suas respectivas versões com MFI como as melhores opções para o start rotacional. / This work aims to develop a compact wind turbine for a turbine and a small scale, aiming at a better rotational start at low wind speeds (lower starting torque to rotate). A diffuser is a rim-shaped structure wrapped around the wind turbine rotor, its function is to amplify the wind uptake and acceleration, exploiting the aerodynamic effects of the low-pressure vortex zones at the diffuser outlet. The study will focus on the manipulation of the diffuser geometry, analyzing how its design impacts on its aerodynamic behavior, especially on the diffuser's ability to equate the high and low pressure zones along its structure, this relation is decisive for the aerodynamic effect that accelerates the air flow, resulting in a rotational start at low wind speeds. The basis for this work are studies developed by Ohya et al. (2010) on compact-flanged diffusers for wind turbines, called Wind-lens Technology. To achieve the objectives, this research will use CFD simulations with virtual wind tunnel software and experimental tests in physical wind tunnel to evaluate the dynamic behavior (turbine + diffuser). Nineteen geometries were developed from a standardized design area for the design of diffusers. An MFI (internal flow microseparator) has also been developed, which is an additional structure whose function is to potentiate the low pressure zones of the diffusers. The results showed that the manipulation of the diffuser geometry produced promising results in comparison to the reference model, reaching in some conditions superior results in RPM and initial start. The MFI proved to be effective in boosting the low pressure zones and improved the initial start. At the end, two models of diffusers and their respective versions with MFI were defined as the best options for the initial start.

Este trabalho tem como proposta desenvolver um difusor aerodinâmico compacto para uma turbina eólica de pequena escala, objetivando alcançar um melhor start rotacional (menor torque de partida para rotacionar) em baixas velocidades de vento. Um difusor é uma estrutura em forma de aro envolta ao rotor da turbina eólica, sua função é amplificar a captação e aceleração do vento, explorando os efeitos aerodinâmicos das zonas de vórtices de baixa pressão na saída do difusor. O estudo concentrar-se-á na manipulação da geometria dos difusores, analisando como seu design impacta no seu comportamento aerodinâmico impacta na capacidade do difusor equacionar as zonas de alta e baixa pressão ao longo de sua estrutura, essa relação é determinante para o efeito aerodinâmico que acelera o escoamento de ar, resultando em um start rotacional em baixas velocidade de vento. O ponto de partida para este trabalho são os estudos desenvolvidos por Ohya et al. (2010) sobre difusores compactos-flangeados (compact-type brimmed diffuser) para turbinas eólicas, denominado Wind-lens Technology. Para alcançar os objetivos, esta pesquisa vai utilizar simulações por CFD com software de túnel de vento virtual e ensaios experimentais em túnel de vento físico para avaliar o comportamento dinâmico (turbina + difusor). Foram desenvolvidas dezenove geometrias a partir de uma área construtiva padronizada para o design de difusores. Desenvolveu-se também, a partir dos resultados encontrados, um MFI (microseparador de fluxo interno), que consiste em uma estrutura adicional com função de potencializar as zonas de vórtices (baixa pressão) no plano de saída do escoamento de ar dos difusores. Os resultados mostraram que a manipulação da geometria do difusor produziu resultados promissores em comparação com o modelo de referência, alcançando em algumas geometrias de difusores um melhor start rotacional. O MFI mostrou-se eficaz para potencializar as zonas de baixa pressão e melhorou o start rotacional. Ao final, definiu-se dois modelos de difusores e suas respectivas versões com MFI como as melhores opções para o start rotacional. / This work aims to develop a compact wind turbine for a turbine and a small scale, aiming at a better rotational start at low wind speeds (lower starting torque to rotate). A diffuser is a rim-shaped structure wrapped around the wind turbine rotor, its function is to amplify the wind uptake and acceleration, exploiting the aerodynamic effects of the low-pressure vortex zones at the diffuser outlet. The study will focus on the manipulation of the diffuser geometry, analyzing how its design impacts on its aerodynamic behavior, especially on the diffuser's ability to equate the high and low pressure zones along its structure, this relation is decisive for the aerodynamic effect that accelerates the air flow, resulting in a rotational start at low wind speeds. The basis for this work are studies developed by Ohya et al. (2010) on compact-flanged diffusers for wind turbines, called Wind-lens Technology. To achieve the objectives, this research will use CFD simulations with virtual wind tunnel software and experimental tests in physical wind tunnel to evaluate the dynamic behavior (turbine + diffuser). Nineteen geometries were developed from a standardized design area for the design of diffusers. An MFI (internal flow microseparator) has also been developed, which is an additional structure whose function is to potentiate the low pressure zones of the diffusers. The results showed that the manipulation of the diffuser geometry produced promising results in comparison to the reference model, reaching in some conditions superior results in RPM and initial start. The MFI proved to be effective in boosting the low pressure zones and improved the initial start. At the end, two models of diffusers and their respective versions with MFI were defined as the best options for the initial start.

Este trabalho tem como proposta desenvolver um difusor aerodinâmico compacto para uma turbina eólica de pequena escala, objetivando alcançar um melhor start rotacional (menor torque de partida para rotacionar) em baixas velocidades de vento. Um difusor é uma estrutura em forma de aro envolta ao rotor da turbina eólica, sua função é amplificar a captação e aceleração do vento, explorando os efeitos aerodinâmicos das zonas de vórtices de baixa pressão na saída do difusor. O estudo concentrar-se-á na manipulação da geometria dos difusores, analisando como seu design impacta no seu comportamento aerodinâmico impacta na capacidade do difusor equacionar as zonas de alta e baixa pressão ao longo de sua estrutura, essa relação é determinante para o efeito aerodinâmico que acelera o escoamento de ar, resultando em um start rotacional em baixas velocidade de vento. O ponto de partida para este trabalho são os estudos desenvolvidos por Ohya et al. (2010) sobre difusores compactos-flangeados (compact-type brimmed diffuser) para turbinas eólicas, denominado Wind-lens Technology. Para alcançar os objetivos, esta pesquisa vai utilizar simulações por CFD com software de túnel de vento virtual e ensaios experimentais em túnel de vento físico para avaliar o comportamento dinâmico (turbina + difusor). Foram desenvolvidas dezenove geometrias a partir de uma área construtiva padronizada para o design de difusores. Desenvolveu-se também, a partir dos resultados encontrados, um MFI (microseparador de fluxo interno), que consiste em uma estrutura adicional com função de potencializar as zonas de vórtices (baixa pressão) no plano de saída do escoamento de ar dos difusores. Os resultados mostraram que a manipulação da geometria do difusor produziu resultados promissores em comparação com o modelo de referência, alcançando em algumas geometrias de difusores um melhor start rotacional. O MFI mostrou-se eficaz para potencializar as zonas de baixa pressão e melhorou o start rotacional. Ao final, definiu-se dois modelos de difusores e suas respectivas versões com MFI como as melhores opções para o start rotacional. / This work aims to develop a compact wind turbine for a turbine and a small scale, aiming at a better rotational start at low wind speeds (lower starting torque to rotate). A diffuser is a rim-shaped structure wrapped around the wind turbine rotor, its function is to amplify the wind uptake and acceleration, exploiting the aerodynamic effects of the low-pressure vortex zones at the diffuser outlet. The study will focus on the manipulation of the diffuser geometry, analyzing how its design impacts on its aerodynamic behavior, especially on the diffuser's ability to equate the high and low pressure zones along its structure, this relation is decisive for the aerodynamic effect that accelerates the air flow, resulting in a rotational start at low wind speeds. The basis for this work are studies developed by Ohya et al. (2010) on compact-flanged diffusers for wind turbines, called Wind-lens Technology. To achieve the objectives, this research will use CFD simulations with virtual wind tunnel software and experimental tests in physical wind tunnel to evaluate the dynamic behavior (turbine + diffuser). Nineteen geometries were developed from a standardized design area for the design of diffusers. An MFI (internal flow microseparator) has also been developed, which is an additional structure whose function is to potentiate the low pressure zones of the diffusers. The results showed that the manipulation of the diffuser geometry produced promising results in comparison to the reference model, reaching in some conditions superior results in RPM and initial start. The MFI proved to be effective in boosting the low pressure zones and improved the initial start. At the end, two models of diffusers and their respective versions with MFI were defined as the best options for the initial start.

Large Scale Wind Turbines (LSWTs) have been extensively examined for decades but very few studies have been conducted on the small scale wind turbines (SSWTs) especially for the applications near ground level where wind speed is of order of few meters per second. This study provides the first systematic effort towards design and development of SSWTs (rotor diameter<50 cm) targeted to operate at low wind speeds (<5 m/s). An inverse design and optimization tool based on Blade Element Momentum theory is proposed. The utility and efficacy of the tool was validated by demonstrating a 40 cm diameter small-scale wind energy portable turbine (SWEPT) operating in very low wind speed range of 1 m/s-5 m/s with extremely high power coefficient. In comparison to the published literature, SWEPT is one of the most efficient wind turbines at the small scale and very low wind speeds with the power coefficient of 32% and overall efficiency of 21% at its rated wind speed of 4.0 m/s. It has very low cut-in speed of 1.7 m/s. Wind tunnel experiments revealed that SWEPT has rated power output of 1 W at 4.0 m/s, and it is capable of producing power output up to 9.3 W at wind speed of 10 m/s. The study was further extended to develop a piezoelectric wind turbine which operates below 2.0 m/s wind speed. The piezoelectric wind turbine of overall dimension of 100mm x 78mm x 65mm is capable of producing peak electric power of about 450 microwatt at the rated wind speed of 1.9 m/s. / Master of Science

The recent worldwide economic crisis, climate change and global warming have emphasized that the need for low carbon emissions while also ensuring the economic feasibility. In this paper, wind power potential of ETD in KTH was investigated. The technical and economical feasibility of tower mounted small scale standalone wind turbine installation is conducted. The potential of wind power production was statistically analysed. The average wind speed data of four-season interval of one year period (2011) which its measurement was taken on the roof top of the ETDB, and this was adopted and analysed in order to find out the potential of wind power generation. The Rayleigh distribution probability was applied to calculate the wind speed distribution at KTH, by doing so the annual wind power potential at the area and annual energy production of the chosen wind turbine was estimated, after the selection of a proper wind turbine have been made upon the site conditions. Therefore, the study result shows that installation of the wind turbine at 24 meters hub height for this particular area will have a better performance of annual energy production, capacity factor, carbon savings and better economical value than the current turbine installed at 17 meters height at the ETD. The economic evaluation shows that the turbine can save an electricity bill of US$3661.05 per year and cover 1.84% of the electricity consumption of the ETD by reducing its respective CO2 emission from the electricity use at the department. Moreover, the payback period of the turbine installation with the inclusion of the green certificate is approximately 14 years which is more feasible if it is considered for small wind turbines too, which is already in practice for renewables including wind power in Sweden.

Buildings account for up to 40% of the total energy use in the world. Directives from the European Union have pointed out the significance of increasing the energy efficiency in buildings. New regulation in countries like Sweden has established that new buildings should fulfil regulations of Nearly Zero Energy Buildings (NZEB), providing the opportunity for renewable energy technologies to achieve these goals. In this paper, the retrofitting potential of renewable energy technologies for a single-family home in Sweden was investigated.The present work studied the characteristics of several renewable energy technologies and their applications for a single-family home in Sweden, including biomass, solar photovoltaics, solar thermal, heat pump, and small-scale wind turbine. Three renewable energy technologies (solar thermal, heat pump and small-scale wind turbine) and one renovation method (window) were selected to investigate. The analysis was made of the current energy use and the potential energy (and cost) savings from each retrofitting of these facilities by means of simulation models using IDA ICE software. The study results show that the proposed renewable energy technologies are technically feasible and economically viable as a source of alternative renewable energy in order to produce clean energy and reduce electricity bills for an electric-heated single-family home located in Sweden. Moreover, the combined retrofitting scheme consist of solar thermal system and window renovation was also proposed and explored. As a result the energy performance of the single-family home would satisfy the nearly-zero energy building requirements and thermal comfort could be maintained at an acceptable level.

L'objectif de cette thèse est de proposer l'approche la plus appropriée afin de minimiser le coût d'intégration de petite éolienne dans un micro-réseau DC urbain. Une petit éolienne basé sur un machine synchrone à aimant permanent (MSAP) est considéré à étudier. Un état de l'art concernant les énergies renouvelables, micro-réseau DC, et la production d'énergie éolienne, est fait. Comme le capteur mécanique de cette structure est relativement d'un coût élevé, les différents types de contrôle pour un système de conversion éolienne sont présentés afin de choisir une structure active de conversion d'énergie et un MSAP sans capteur. Par conséquent, un estimateur de vitesse/position est nécessaire pour contrôler le système. Ainsi, les méthodes différentes proposées dans la littérature sont considérées et classifiées à étudier dans les détails, puis les plus efficaces et largement utilisés sont à vérifier dans la simulation et expérimentalement pour le système étudié. Les méthodes choisies sont: estimation de la flux de rotor avec boucle à verrouillage de phase (PLL), observateur à mode glissement (SMO), observateur de Luenberger d'ordre réduit, et filtre de Kalman étendu (EKF). Face à d'autres méthodes, l'estimateur basé sur un modèle EKF permet une commande sans capteur dans une large plage de vitesse et estime la vitesse de rotation avec une réponse rapide. Le réglage des paramètres EKF est le problème principal à sa mise en œuvre. Par conséquent, pour résoudre ce problème, la thèse présente une méthode adaptative, à savoir réglage-adaptatif d’EKF. En conséquence, et grâce à cette approche, le coût total du système de conversion est réduite et la performance est garantie et optimisée. / The aim of this thesis is to propose the most appropriate approach in order to minimize the cost of integration of a wind generator into a DC urban microgrid. A small-scale wind generator based on a permanent magnet synchronous machine (PMSM) is considered to be studied. A state of the art concerning the renewable energies, DC microgrid, and wind power generation is done. As the mechanical sensor for this structure is relatively of high cost, various types of wind conversion system control are presented in order to choose an energy conversion active structure and a sensorless PMSM. Therefore, a speed/position estimator is required to control the system. Thus, different methods proposed in literatures are considered and classified to be studied in details, and then the most effective and widely used ones are to be verified in simulation and experimentally for the studied system. The methods which are chosen are: rotor flux estimation with phase locked loop (PLL), sliding mode observer (SMO), Luenberger observer of reduced order, and extended Kalman filter (EKF). Facing to other methods, the EKF model-based estimator allows sensorless drive control in a wide speed range and estimates the rotation speed with a rapid response. The EKF parameters tuning is the main problem to its implementation. Hence, to solve this problem, the thesis introduces an adaptive method, i.e. adaptive-tuning EKF. As a result and grace to this approach, the total cost of conversion system is reduced and the performance is guaranteed and optimized.