No description available.

No description available.

Cette thèse est consacrée à étudier et à améliorer les modèles mathématiques et les méthodes utilisées pour les modèles de solvatation implicite en chimie quantique. Ce manuscrit est composée de deux parties. Dans la première partie où nous analysons l'interface soluté-solvant, nous donnons, pour la première fois, une caractérisation complète de la surface moléculaire lisse, c'est-à-dire la surface exclue du solvant (SES). À partie de cette caractérisation, nous développons un algorithme de maillage par morceaux pour les surfaces moléculaires différentes, en particulier pour la SES, en utilisant la triangulation à front avançant. De plus, la cavité de la SES (la région entourée par la SES) est une description plus précise de la cavité de soluté. Dans la deuxième partie, nous construisons donc un modèle de continuum polarisable basé (PCM) sur la SES, dans lequel le paramètre de permittivité diélectrique est continu. Le problème électrostatique de ce modèle consiste à résoudre une équation de Poisson définie sur R3. Nous développons ensuite une méthode de Schwarz particulière, où seules les équations locales restreintes à des boules doivent être résolues. Enfin, nous étudions le modèle de solvatation de Poisson-Boltzmann, un autre modèle de solvatation implicite, qui tient compte à la fois de la permittivité diélectrique et de la force ionique du solvant. Une méthode de Schwarz similaire est proposée pour résoudre l'équation de Poisson-Boltzmann associée en résolvant des équations locales restreintes aux boules comme pour le PCM basé sur la SES. / This thesis is devoted to study and improve the mathematical models and methods used in implicit solvation models in quantum chemistry. The manuscript is composed of two parts. In the first part where we analyze the solute-solvent interface, we give, for the first time, a complete characterization of the so-called “smooth” molecular surface, i.e., the solvent excluded surface (SES). Based on this characterization, we develop a piecewise meshing algorithm for different molecular surfaces, especially the SES, using the advancing-front triangulation. Further, it has been pointed out in the literature that the SES-cavity (the region enclosed by the SES) is a more accurate description of the solute cavity. In the second part, we therefore construct an SES-based polarizable continuum model (PCM), in which the dielectric permittivity parameter is continuous. The electrostatic problem of this model involves solving a Poisson equation defined in R3. We then develop a particular Schwarz domain decomposition method where only local equations restricted to balls need to be solved. Finally, the Poisson-Boltzmann solvation model, another implicit solvation model, is also investigated, which takes into account both the dielectric permittivity and the ionic strength of the solvent. A similar Schwarz domain decomposition method is proposed to solve the associated Poisson-Boltzmann equation by solving local equations restricted to balls as it is for the SES-based PCM.

(EN) The solvation model based on LSER was applied to study the retention behaviour of analytes in liquid and gas chromatography. In a first chapter, a retention description of 21 solutes was investigated by using the solvation model in a wide range of mobile phase composition methanol-water and acetonitrile-water. Generally, the retention of aromatic compounds was better described by the solvation model, compared to aliphatic compounds. Effect of the particular analytes used to formulate the LSER model on ability of retention description was studied. Different results of a retention estimation was achieved by using the regression set of compounds including aromatic solutes only or by contrast aliphatic solutes only. The solvation model developed on the basis of oxygen derivatives provided distinct results in comparison to model formulated with nitrogen derivatives only. The second chapter of this work, focused on gas chromatography, dealt with a description of retention of 152 isomers C5-C8 alkenes by the LSER model. The solvation descriptor L was obtained by using two estimation methods Havelec-Ševčík (HS) and Platts-Butina (PB), the descriptor E was calculated according to its definition. Two models for retention description of alkenes were constructed, the HS model and the PB model, derived...

Made available in DSpace on 2017-07-20T12:40:20Z (GMT). No. of bitstreams: 1 Mariana_N_Levandowski.pdf: 3613595 bytes, checksum: 6d13f04a1872ade8572c9eae481770c6 (MD5) Previous issue date: 2017-02-13 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / This study presents a theoretical and experimental analysis of the conformational equilibrium of phenylacetic acid and its derivatives, namely: o-fluorophenylacetic, ochlorophenylacetic, o-bromophenylacetic, o-nitrophenylacetic, hydroxyphenylacetic, m-fluorophenylacetic, p-fluorophenylacetic, p-nitrophenylacetic, p-hydroxyphenylacetic, p-mercaptophenylacetic and p-aminophenylacetic. Thetechniques used were computational calculations and nuclear magnetic resonance and infrared spectroscopy.The study made it possible to verify the conformational preference of each compound, determined by their energies and geometries, which were evaluated both for the isolated molecule, at distinct theory levels, and in different solvents, with the IEF-PCM solvation model. By using natural bond orbital calculations, it was possible to identify the main orbital interactions for each conformation. With the total deletion calculations, it was verified that there was a balance between the steric and hyperconjugative effects in the stabilization of the most stable structures. The majority conformers of halogenated compounds in ortho revealed the same spatial orientation between the carbonyl and the benzene ring, similar to that of the phenylacetic acid. In the derivatives, nitro and hydroxylated in ortho, there was the presence of an intramolecular hydrogen bond, but in none of these cases the interaction referred to one of the main conformers. The infrared experiments in solvents of different polarities, allowed the identification of more than one band, enabling the attribution of conformers present in the equilibrium as well as the observation of the same tendency as the one obtained theoretically. The coupling constant 1JCH was evaluated through nuclear magnetic resonance. No significant variation of this constant was observed, showing that the major contribution to the equilibrium is related to the majoritarian conformer, which prevails even with the change in the polarity of the medium, for each compound under evaluation. / Neste trabalho foi apresentado uma análise teórica e experimental do equilíbrio conformacional do ácido fenilacético e seus derivados, sendo eles: ofluorofenilacético, o-clorofenilacético, o-bromofenilacético, o-nitrofenilacético, ohidróxifenilacético, m-fluorofenilacético, p-fluorofenilacético, p-nitrofenilacético, phidróxifenilacético,p-mercaptofenilacético e p-aminofenilacético. As técnicas utilizadas foram os cálculos computacionais e as espectroscopias de ressonância magnética nuclear e infravermelho. Com este estudo foi possível verificar a preferência conformacional de cada composto, determinadas pelas suas energias e geometrias, as quais foram avaliadas tanto para a molécula isolada, em distintos níveis de teoria, quanto em diferentes solventes, com o modelo de solvatação IEFPCM. Através dos cálculos dos orbitais naturais de ligação foi possível identificar as principais interações orbitais para cada conformação. Com os cálculos de deleção total, verificou-se que houve um balanço entre os efeitos estérico e hiperconjugativo na estabilização das estruturas mais estáveis. Os confôrmeros majoritários dos compostos halogenados em orto mostraram a mesma orientação espacial entre a carbonila e o anel benzênico, semelhante ao ácido fenilacético. Nos derivados,nitrado e hidroxilado em orto, houve a presença de uma ligação de hidrogênio intramolecular, em nenhum dos casos esta interação era referente a um dos confôrmeros principais. Utilizando a técnica de infravermelho na região do fundamental da carbonila, em solventes de diferentes polaridades, permitiram identificar a presença de mais de uma banda, sendo possível a atribuição dos confôrmeros presentes no equilíbrio, bem como observar a mesma tendência obtida teoricamente. Com a espectroscopia de ressonância magnética nuclear foi avaliada a constante de acoplamento 1JCH. Não houve uma variação significativa desta constante, mostrando que a maior contribuição no equilíbrio está relacionada com o confôrmero majoritário, que prevalece mesmo com a mudança da polaridade do meio, de cada composto avaliado.

De nos jours, remplacer les solvants organiques utilisés traditionnellement dans l'industrie chimique par une nouvelle génération de solvants moins toxique, moins inflammable et moins polluante est un défi considérable. Les liquides ioniques, sels liquides qui satisfont ces critères, sont envisagés comme alternatives. Le but de ce travail est d'étudier le comportement des liquides ioniques en présence de composés organiques ou de gaz afin d'établir leur domaine d'applications dans le génie des procédés.Dans un premier temps, une étude chromatographique présente les interactions entre composés organiques et les liquides ioniques. Les données de rétention ont permis d'estimer la sélectivité à dilution infinie de plusieurs liquides ioniques pour différents problèmes de séparation. Un modèle de solvatation <<GC-LSER>> a été développé afin de prédire les coefficients de partage de solutés dans des liquides ioniques classiques et fonctionnalisés. Ensuite, l'étude des équilibres liquide-liquide de systèmes ternaires ont permis d'évaluer l'efficacité de trois liquides ioniques pour trois problèmes de séparation fréquemment rencontrés dans l'industrie chimique (extraction des composés aromatiques, du thiophène ou des alcools linéaires). Les valeurs des sélectivités et des coefficients de distribution élevées indiquent que les liquides ioniques étudiés peuvent remplacer les solvants traditionnels. Enfin, les performances des liquides ioniques pour la capture des gaz à effet de serre sont évaluées grâce à des mesures de solubilités du dioxyde de carbone et du protoxyde d'azote dans les liquides ioniques sous hautes pressions. Les données expérimentales ont été utilisées afin d'étendre le modèle PPR78 (Predictive 1978, Peng-Robinson equation of state) aux systèmes {CO2+ liquide ionique} / Nowadays, replacement of conventional organic solvents by a new generation of solvents less toxic, less flammable and less polluting is a major challenge for the chemical industry. Ionic liquids have been widely promoted as interesting substitutes for traditional solvents. The aim of this work is to study the behavior of ionic liquids with organic compounds or gases in order to determine their range of applications in process engineering.First, interactions between organic compounds and ionic liquids are studied using inverse gas chromatography. The activity coefficients at infinite dilution are used to calculate capacity and selectivity of different ionic liquids for different separation problems. A solvation model <<GC-LSER>> is proposed in order to estimate the gas-to-ionic liquid partition coefficients in alkyl or functionalized ionic liquids. Then, liquid-liquid equilibria measurements of ternary systems were carried out in order to evaluate the efficiency of three ionic liquids for three separation problems frequently encountered in chemical industry (extraction of aromatic compounds, thiophene or linear alcohols). The high values of distribution coefficients and selectivities indicate that the investigated ionic liquids could replace the traditional solvents. Finally, the performance of ionic liquids for greenhouse gases capture was examinated through solubility measurements of carbon dioxide and nitrous oxide in ionic liquids at high pressure. The experimental data is used in order to extend the model PPR78 (Predictive 1978, Peng-Robinson equation of state) to systems containing {CO2+ ionic liquid}