Laminar turbulent transition is known for a long time as a critical phenomenon influencing the thermal load encountered by hypersonic vehicle during their planetary re-entry trajectory. Despite the efforts made by several research laboratories all over the world, the prediction of transition remains inaccurate, leading to oversized thermal protection system and dramatic limitations of hypersonic vehicles performances. One of the reasons explaining the difficulties encountered in predicting transition is the wide variety of parameters playing a role in the phenomenon. Among these parameters, surface roughness is known to play a major role and has been investigated in the present thesis.<p><p>A wide bibliographic review describing the main parameters affecting transition and their coupling is proposed. The most popular roughness-induced transition predictions correlations are presented, insisting on the lack of physics included in these methods and the difficulties encountered in performing ground hypersonic transition experiments representative of real flight characteristics. This bibliographic review shows the importance of a better understanding of the physical phenomenon and of a wider experimental database, including real flight data, for the development of accurate prediction methods.<p><p>Based on the above conclusions, a hypersonic experimental test campaign is realized for the characterization of the flow field structure in the vicinity and in the wake of 3D roughness elements. This fundamental flat plate study is associated with numerical simulations for supporting the interpretation of experimental results and thus a better understanding of transition physics. Finally, a model is proposed in agreement with the wind tunnel observations and the bibliographic survey.<p><p>The second principal axis of the present study is the development of a hypersonic in-flight roughness-induced transition experiment in the frame of the European EXPERT program. These flight data, together with various wind tunnel measurements are very important for the development of a wide experimental database supporting the elaboration of future transition prediction methods. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

The hypersonic laminar to turbulent transition problem above Mach 10 is addressed experimentally in the short duration VKI Longshot gun tunnel. Reentry conditions are partially duplicated in terms of Mach and Reynolds numbers. Pure nitrogen is used as a test gas with flow enthalpies sufficiently low to avoid its dissociation, thus approaching a perfect gas behavior. The stabilizing effects of Mach number and nosetip bluntness on the development of natural boundary layer disturbances are evaluated over a 7 degrees half-angle conical geometry without angle of attack. <p><p>Emphasis is initially placed on the flow characterization of the Longshot wind tunnel where these experiments are performed. Free-stream static pressure diagnostics are implemented in order to complete existing stagnation point pressure and heat flux measurements on a hemispherical probe. An alternative method used to determine accurate free-stream flow conditions is then derived following a rigorous theoretical approach coupled to the VKI Mutation thermo-chemical library. Resulting sensitivities of free-stream quantities to the experimental inputs are determined and the corresponding uncertainties are quantified and discussed. The benefits of this different approach are underlined, revealing the severe weaknesses of traditional methods based on the measurement of reservoir conditions and the following assumptions of an isentropic and adiabatic flow through the nozzle. The operational map of the Longshot wind tunnel is redefined accordingly. The practical limits associated with the onset of nitrogen flow condensation under non-equilibrium conditions are also accounted for. <p><p>Boundary layer transition experiments are then performed in this environment with free-stream Mach numbers ranging between 10-12. Instrumentation along the 800mm long conical model includes flush-mounted thermocouples and fast-response pressure sensors. Transition locations on sharp cones compare favorably with engineering correlations. A strong stabilizing effect of nosetip bluntness is reported and no transition reversal regime is observed for Re_RN<120000. Wavelet analysis of wall pressure traces denote the presence of inviscid instabilities belonging to Mack's second mode. An excellent agreement with Linear Stability Theory results is obtained from which the N-factor of the Longshot wind tunnel in these conditions is inferred. A novel Schlieren technique using a short duration laser light source is developed, allowing for high-quality flow visualization of the boundary layer disturbances. Comparisons of these measurement techniques between each other are finally reported, providing a detailed view of the transition process above Mach 10. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished