In my graduation theses I am dealing with comparing the final price of a construction,if the construction is beeing realized as house raising or a supply.In the theoretic part of my theses we are going to acquaint with the prices in the building industry since the year 1990 until present,with the price development,the price order and the price system in the Czech Republic.Let us talk about what are the information resources to determine the price of a construction.We will demonstrate the way of making up the price of the project during its life cycle step by step.In the practical part of my theses I do the price analysis of a building carried out as house raising or a supply.First I describe the way of making both prices.Then the prices are compared among each other.At the conclusion the lowest price of the building is chosen according to the way of its construction and also my recommendation which construction form is the most conveniant for the promoter.

The master´s thesis focuses on modification of existing interchange Kývalka on D1 motorway. The purpose of this thesis is to design optimal solution of junction of roads I/23 and II/602 with D1 motorway connecting all directions, considering transport capacity a safety. The another part of the thesis is widening motorway D1 to six lane arrangement with one lane for slow vehicles. At first, several possible designs were suggested of which two were chosen for further elaboration as a search study. In the end, thesis contains the comparison of two chosen designs.

This diploma thesis deals with the analysis and evaluation of quality, environmental and safety risks in the design process of the designing the foundations of building. The calculation procedure is shown in the model example. Subsequently, the risk analysis according to DIN EN 31010: 2011 Risk Management - Risk Assessment Techniques is performed. The risk assessment was made by following methods: analysis of the causes and consequences (Ishikawa diagram), the risk matrix and Analysis Failure Modes and Effects (FMEA). Using these methods, the risk were identified and assessed. There are also proposed appropriate measures to reduce the risk value. Comparisons with publications with a similar theme is performed in the final summary.

Content of Doctoral thesis is a methodology for juridical experts on the assessment of structures manufactured of weathering steel, with special attention to evaluation of the protective corrosion layer.

Věra Sušická - Diplomová práce 2012 Anglický překlad The final work is concerned with the remanis of dwelling in the context of Funnel Beaker culture. It is divided into five basic regions. In general these regions are consisting of south Scandinavia, the Netherlands, Germany, Poland, Bohemia, Lower Austria and west Ukraine. 76 localities were obtained from all these regions. There was proof of more then 160 dwellings (Underground/dig houses, post hole houses). Particular types of dwellings and their functional characteristics were described typologically and chronologically. The finds were scrutinized, especially the czech ones. This work also further discusses the issues of the survival process of mentioned dwellings and the ways of evaluation and research. Klíčová slova: Funnel Beaker Culture -Central European kontext - dwelling structure - post hole houses - dig houses Obsah: Text - 117 str. (47 poznámek pod čarou), literatura a prameny - 18 str., obrazové přílohy - 19 obr., tabulky - 44 str., mapy - 5 listů (celkem: 193 listů ve formátu A3, 4 listy ve formátu A4).

This thesis considers some issues regarding geotechnical monitoring of settlement of subsoils on roads, highways in the Czech Republic. The first part try to explain process of construction embankments with following standards and prescriptions. Second part belongs to geotechnical monitoring of settlement of subsoils, where author had selected 7 measuring profiles for further work on archive exploration. From these exploration were excluded information about exact location. Third part is creation of 9 geotechnical models in 2D - Plaxis software, comparison with real data and short part about using this kind of work for practice use.

Localization of deformation occurs in Earth's crust as a consequence of applied stress and is widespread phenomenon that can be found in crustal rocks. Such localization of deformation can be mostly seen in a form of shear zones. Small shear zones referred as shear bands or S-C structures are often used as kinematic indicators. However, the evolution and kinematic continuity of such structures is not well identified, which makes it problematic when interpreting regional geodynamic evolution. Two possible cases were distinguished and described in this thesis: a) kinematically discontinuous S-C structures formed during two deformation events and b) kinematically continuous S-C structures formed during single deformation event. Kinematically unrelated S-C structures were studied in westernmost part of Tauern Window in Eastern Alps and in Gemer-Vepor Contact Zone in Central West Carpathians where previous geodynamic interpretations might have misinterpreted localization structures. Kinematically continuous shear bands were studied in South Armorican Shear Zone where the S-C fabrics were originally defined and described (Berthé et al., 1979). Two fabrics that crosscut each other at small angles forming S-C geometries were documented during field work and studied from macroscale down to microscale or...

This thesis deals with sacral architecture in northeastern Slovakia, which contributes to the importance of the Šariš region. Some of the buildings (Bodružal, Hervartov and Ladomirová) are included in the UNESCO World Cultural Heritage. The aim of this thesis was dendrochronological dating of selected wooden churches in this region. Based on standard dendrochronological procedures, remove, prepare and measure samples as well as anatomically identify the woods used to build churches. For the purpose of this work, 8 churches of the log structure were selected (Bodružal, Frička, Hervartov, Jedlinka, Kožany, Krivé, Ladomirová, Lukov), of which 118 samples were taken using a Pressler increment borer and 25 photographs for image analysis. The most represented wood was fir (130 samples). A total of 143 samples collected resulted in a successful dating of all churches. The oldest of the dated churches was in Hervartov, where the timber was mined between 1589 and 1593. On the other hand, the youngest of the dated churches was the church in Krive, dating from 1822 to 1826. to the early 19th century. Synchronized annual ring curves were used to construct a local standard chronology that covers the period between 1465 and 1845. This local standard chronology can be used for further determination of wooden churches not only in eastern Slovakia but also in the vicinity. Dating contributes to the clarification of the building history of some churches, as the literature often states inconsistencies.

This thesis discusses the classification of traditional log buildings according to their residential type and the local architectural form of the given time period and their use and function in the current administrative regions of the Czech Republic. The individual buildings are defined by the type of their construction, their details and typological characterictics. The attachments include catalog sheets, which provide appropriate recommendations for design of new timbered buildings, that will not disrupt the traditional landscape of a given location. The thesis also includes photodocumentation and final evaluations of newly constructed timbered buildings.

The diploma thesis deals with a rail wear in curves with a small radius (R < 500 m), in the national corridor railway, between stations Blansko and Svitavy. The diploma thesis deals with the impact of the track gradient, the horizontal layout of the track, traffic composition, and direction of travel on the size of the horizontal and vertical rail wear. Also, the influence of rail steel grade is discussed in the diploma thesis.