Thesis (MScEng (Civil Engineering))--University of Stellenbosch, 2005. / Adequate member design is a vital part of structural design. Current design software automates the design process by making use of the finite element model to create a design model. Although this is time effective, the engineer has limited control over the factors and procedures that are used for design. This leads to a lack of confidence in the eventual design results.

Thesis (MScEng (Civil Engineering))--University of Stellenbosch, 2009.

Thesis (MScEng)--University of Stellenbosch, 2004. / ENGLISH ABSTRACT: Connections are a vitally important part of any structural framework. Thisstatement may seem obvious, yet it is surprisinghow often insufficient attention is given to the design of this essential aspect of steelwork projects. This thesis concentrates on developing a specification for designing steel connections with the main emphasis on the practical and economical design of typical connections. The design methods of the specification are developed according to the new South African design code which is currently in draft form, namely SANS10162:Code of Practice for the Structural Use of Steel: Part 1: Limit States Design of hot-rolled steelwork - 2002. An object-oriented framework and associated graphical user interface for designing the connections are developed and implemented. The primary objectives of the implemented framework are: • Being generic in the sensethat it allows for easy addition of additional connection types, • To implement the design paradigm of the South African code, without fixing specific parameter values programmatically in the implementation and • To build on an existing architecture that allows for structural analysis,structural steel member design and distributed collaboration in the design process. / AFRIKAANSE OPSOMMING: Verbindings vorm In uiters belangrike deel van enige staal struktuur. Alhoewel hierdie stelling dalk vanselfsprekend mag wees, is dit egter verbasend hoe selde voldoende aandag aan die ontwerp van hierdie essensiëleaspek van staalwerk projekte gegee word. Hierdie tesis konsentreer op die ontwikkeling van In spesifikasievir die ontwerp van staal verbindings met die oog op praktiese en ekonomiese ontwerp van tipiese verbindings. Hierdie ontwerpmetodes isgebasseer op die nuwe Suid Afrikaanse ontwerpkode wat tans in proef-vorm is, naamlik SANS 10162: Gebruikskode vir Stoa/bouwerk: Dee/I: Grenstoestandontwerp vir warmgewa/ste staa/werk - 2002. In Objek orienteerde raamwerk en In geassosieerde grafiese gebruikerskoppelvlak word ontwikkel en geimplimenteer. Die primêre mikpunte van hierdie geimplimenteerde raamwerk is: • Om generies te wees in die sin dat dit die byvoeging van addisionele verbinding tipes toelaat, • Om die paradigma van die Suid Afrikaanse kode te implimenteer sonder om enige waardes van spesifieke parameters programmaties vas te lê, en • Om dit op In bestaande argitektuur te bou wat strukturele analise, strukturele ontwerp en verspreide samewerking in die ontwerpproses toelaat.

Thesis (MEng)--Stellenbosch University. / ENGLISH ABSTRACT: see item for full text / AFRIKAANSE OPSOMMING: sien item vir volteks.

Weathering steel has been a primary construction material for bridges in the United States. Notches caused by corrosion are observed on the flange of steel I-beams. These notches reduce the cross section area of the structure and are threats to bridge safety. A606-04 Type 4 cold rolled weathering steel samples were studied in this thesis to understand the effect of notches that caused by corrosion. Weathering steel samples were in the shape of plates, which simulated flange of I-beams. The plate samples were notched across their surfaces by applying electrical current through an electrochemical circuit composed of an anode, a cathode and electrolyte. Sixteen samples were notched and cut into appropriate shape for fatigue testing. S-N (Stress-Number of cycles to failure) diagram established from fatigue data indicated that the fatigue strength decreased below AASHTO category B. Weibull analysis was also performed to understand the reliability distribution. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2014. / FAU Electronic Theses and Dissertations Collection

Two duplex stainless steels rebars: UNS32304SS and UNS32101SS, were selected to investigate the corrosion initiation and propagation in reinforced concrete specimens. The investigation is divided in two phases with two different methods to accelerate the transport of chlorides through the concrete and initiate corrosion in a short period of time. After corrosion had initiated and propagated for some time; selected specimens were terminated for visual examination. On specimens selected for autopsy, the rebars in the top row showed corrosion to various degrees. Corrosion had propagated to such extent on the terminated specimens that the specimen showed cracks. Stray current might have caused accelerated corrosion on rebars where corrosion had initiated. Based on chloride concentrations measured at the rebar trace, corrosion initiated: on S32101 rebars on average at 7.9 kg/m3, and S32101 rebars on average at 6.0 kg/m3. The findings suggest that S32304 rebars corroded at a slower than S32101. / by Francisco Gutierrez Tellez. / Thesis (M.S.C.S.)--Florida Atlantic University, 2013. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1981. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING. / Includes bibliographical references. / by David Matthew DeLonga; Ensign, USN. / M.S.

The inclusion of trapezoidal types of steel decking in the shear connection of composite beams has been found to significantly reduce their maximum strength and ductility by causing premature concrete-related failure modes. In order to investigate the complex behaviour and various load-transfer mechanisms that can occur in composite beams incorporating this type of connections, a total of 91 carefully-designed push-out tests were performed. Specific failure modes in conventionally reinforced specimens were initially induced by varying critical parameters. Specimens incorporating specific stud reinforcing devices were subsequently tested to suppress the undesirable failure modes. The concrete reinforcing and stud performance-enhancing devices, which included novel waveform-type reinforcement elements and spiral wire or ring components surrounding individual studs in secondary composite beams and special haunch reinforcement in primary beam applications, significantly delayed the onset and reduced the effect of the premature concrete-related failure modes. Hence, they increased the ultimate strength and ductility of the shear connection. The findings of the small-scale push-out tests were also verified in two full-scale composite beam tests which showed good agreement in shear connection behaviour and failure mode. Most of the design approaches currently used around the world take into account the weakening effect of trapezoidal types of decking by applying a reduction factor to the nominal strength that the same connection would have in a solid slab. From the test results, it is evident that not every shear connection incorporating steel decking, and within the limits of the associated standards, can be classified as ductile. A new and more reliable design approach is proposed which also incorporates the application of the various stud reinforcing devices. The key element of this design approach is to classify the anticipated connection behaviour, in regards to its deformation capacity, into ductile or brittle connections, hence ensuring satisfactory shear connection behaviour where the new types of trapezoidal steel decking are used. A reliability analysis of the new proposal is presented which enables the application of this new approach in accordance with AS 2327.1 (Standards Australia 2003). It is calibrated to provide a reliability index similar to stud applications currently in use. Simple strength reduction factors for the types of trapezoidal steel decking available in Australia are also provided which can be applied to the current solid slab shear connection strength for a fast and simplified design. / Doctor of Philosophy (PhD)

"1st February 2002" / Includes bibliographical references (leaves 265-273) / xi, 273 leaves : ill. (some col.), plates (col.) ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Concerns the specialized requirements of welding procedures used on operational gas pipelines. / Thesis (Ph.D.)--University of Adelaide, Dept. of Mechanical Engineering, 2004?

Thesis (Ph. D.)--University of Washington, 2006. / Vita. Includes bibliographical references (leaves 266-272).