No description available.

In this research a variable-stiffness compliant mechanism was developed to generate variable force-displacement profiles at the mechanisms coupler point. The mechanism is based on a compliant Roberts straight-line mechanism, and the stiffness is varied by changing the effective length of the compliant links with an actuated slider. The variable-stiffness mechanism was used in a one-degree-of-freedom haptic interface to demonstrate the effectiveness of varying the stiffness of a compliant mechanism. Unlike traditional haptic interfaces, in which the force is controlled using motors and rigid links, the haptic interface developed in this work displays haptic stiffness via the variable-stiffness compliant mechanism. The force-deflection behavior of the mechanismwas analyzed using the Pseudo-Rigid Body Model (PRBM), and two key parameters, KQ and g,were optimized using finite element analysis (FEA) to match the model with the behavior of the device. One of the key features of the mechanism is that the inherent return-to-zero behavior of the compliant mechanism was used to provide the stiffness feedback felt by the user. A prototype haptic interface was developed capable of simulating the force-displacement profile of Lachmans Test performed on an injured ACL knee. The compliant haptic interface was capable of displaying stiffnesses between 4200 N/m and 7200 N/m.

<p>The purpose of this thesis was to evaluate musculoskeletal contributions to joint stiffness in the distal upper extremity. An <em>in-vitro</em> and <em>in-vivo</em> approach was used to examine muscle and ligament contributions to mechanical joint stiffness at the elbow and wrist. In Chapters 2 and 3 an <em>in-vitro</em> approach was used to evaluate ligament contributions to carpal tunnel mechanics. Chapter 2 documented transverse carpal ligament (TCL) mechanical properties and provided a calculation of TCL length when stretched, which confirmed the ligaments importance in carpal tunnel mechanics and carpal bone stability. Chapter 3 quantified mechanical properties of the TCL at six different locations using a biaxial tensile testing method. It was found that the complex TCL fibre arrangement makes the tissue properties location dependent. The TCL contributes to carpal tunnel mechanics and carpal stability and the ligament contributions are different depending on the tissue location tested. Chapters 4 and 5 focused on the effects of hand loads and arm postures on the muscular response to sudden arm perturbations. The elbow flexors demonstrated stiffness contributions immediately prior to a perturbation and were influenced by posture and hand loading. The forearm muscles provided a small contribution to elbow joint stiffness. Chapter 6 also found muscular contributions that increased wrist joint stiffness immediately prior to a sudden perturbation. Additionally, for a small grip-demanding task, forearm muscle co-contraction resulted in large increases in wrist joint stiffness.</p> <p>This thesis has provided a detailed analysis of the TCL which improves our understanding of the carpal tunnel and specific mechanisms of injury. It is the first to document individual muscle contributions to elbow and wrist joint stiffness. The comprehensive analysis of ligament and muscular contributions to joint stiffness has provided insight into joint stability in the distal upper extremity. This can improve our understanding of injury caused by sudden joint loading.</p> / Doctor of Philosophy (PhD)

The design and analysis of an automotive structure is an important stage of the vehicle design process. The structural characteristics have significant impact on the vehicle performance. During the design process it is necessary to have knowledge about the structural characteristics; however in the preliminary design stages detailed information about the structure is not available. During this period of the design process the structure is often simplified to a representative model that can be analyzed and used as the input for the detailed design process. A vehicle model is developed based on the space frame structures where the frame is the load carrying portion of the structure. Preliminary design analysis is conducted using a static load condition applied to the vehicle as pure bending and pure torsion. The deflections of the vehicle based on these loading conditions are determined using the finite element method which has been implemented in developed software. The structural response, measured as the bending and torsion stiffness, is used to evaluate the structural design. An optimization program is implemented to improve the structural design with the goal of reducing weight while increasing stiffness. Following optimization the model is completed by estimating suitable plate thicknesses using a method of substructure analysis. The output of this process will be an optimized structural model with low weight and high stiffness that is ready for detailed design. / UOIT

No description available.

Current seismic design practice promotes inelastic response in order to reduce the design forces. By allowing the structure to yield while increasing the ductility of the structure, the global forces can be kept within the limited bounds dictated by the yield strength. However, during severe earthquakes, the structures undergo significant inelastic deformations leading to stiffness and strength degradation, increased interstory drifts, and damage with residual drift. The research presented in this thesis has three components that seek to address these challenges. To prevent the inelastic effects observed in yielding systems, a new concept “apparent weakening” is proposed and verified through shake table studies in this thesis. “Apparent weakening” is introduced in the structural system using a complementary “adaptive negative stiffness device” (NSD) that mimics "yielding” of the global system thus attracting it away from the main structural system. Unlike the concept of weakening and damping, where the main structural system strength is reduced, the new system does not alter the original structural system, but produces effects compatible with an early yielding. Response reduction using NSD is achieved in a two step sequence. First the NSD, which is capable of exhibiting nonlinear elastic stiffness, is developed based on the properties of the structure. This NSD is added to the structure resulting in reduction of the stiffness of the structure and NSD assembly or “apparent weakening”-thereby resulting in the reduction of the base shear of the assembly. Then a passive damper, designed for the assembly to reduce the displacements that are caused due to the “apparent weakening”, is added to the structure-thereby reducing the base shear, acceleration and displacement in a two step process. The primary focus of this thesis is to analyze and experimentally verify the response reduction attributes of NSD in (a) elastic structural systems (b) yielding systems and (3) multistory structures. Experimental studies on 1:3 scale three-story frame structure have confirmed that consistent reductions in displacements, accelerations and base shear can be achieved in an elastic structure and bilinear inelastic structure by adding the NSD and viscous fluid damper. It has also been demonstrated that the stiffening in NSD will prevent the structure from collapsing. Analogous to the inelastic design, the acceleration and base shear and deformation of the structure and NSD assembly can be reduced by more than 20% for moderate ground motions and the collapse of structure can be prevented for severe ground motions. Simulation studies have been carried on an inelastic multistoried shear building to demonstrate the effectiveness of placing NSDs and dampers at multiple locations along the height of the building; referred to as “distributed isolation”. The results reported in this study have demonstrated that by placing a NSD in a particular story the superstructure above that story can be isolated from the effects of ground motion. Since the NSDs in the bottom floors will undergo large deformations, a generalized scheme to incorporate NSDs with different force deformation behavior in each storey is proposed. The properties of NSD are varied to minimize the localized inter-story deformation and distribute it evenly along the height of the building. Additionally, two semi-active approaches have also been proposed to improve the performance of NSD in yielding structures and also adapt to varying structure properties in real time. The second component of this thesis deals with development of a novel device to control the response of structural system using adaptive length pendulum smart tuned mass damper (ALP-STMD). A mechanism to achieve the variable pendulum length is developed using shape memory alloy wire actuator. ALP-STMD acts as a vibration absorber and since the length is tuned to match the instantaneous frequency, using a STFT algorithm, all the vibrations pertaining to the dominant frequency are absorbed. ALP-STMD is capable of absorbing all the energy pertaining to the tuned-frequency of the system; the performance is experimentally verified for forced vibration (stationary and non-stationary) and free vibration. The third component of this thesis covers the development of an adaptive control algorithm to compensate hysteresis in hysteretic systems. Hysteretic system with variable stiffness hysteresis is represented as a quasi-linear parameter varying (LPV) system and a gain scheduled controller is designed for the quasi-LPV system using linear matrix inequalities approach. Designed controller is scheduled based on two parameters: linear time-varying stiffness (slow varying parameter) and the stiffness of friction hysteresis (fast varying parameter). The effectiveness of the proposed controller is demonstrated through numerical studies by comparing the proposed controller with fixed robust H∞ controller. Superior tracking performance of the LPV-GS over the robust H∞ controller in different displacement ranges and various stiffness switching cases is clearly evident from the results presented in this thesis. The LPV-GS controller is capable of adapting to the parameter changes and is effective over the entire range of parameter variations.

Static characteristics and rotordynamic coefficients were experimentally determined for a four-pad tilting-pad journal bearing with ball-in-socket pivots in loadbetween- pad configuration. A frequency-independent [M]-[C]-[K] model fit the measurements reasonably well, except for the cross-coupled damping coefficients. Test conditions included speeds from 4,000 to 12,000 rpm and unit loads from 0 to 1896 kPa (0 to 275 psi). The test bearing was manufactured by Rotating Machinery Technology (RMT), Inc. Though it has a nominal diameter of 101.78 mm (4.0070 in.), measurements indicated significant bearing crush with radial bearing clearances of 99.6 μm (3.92 mils) and 54.6 μm (2.15 mils) in the axes 45º counterclockwise and 45º clockwise from the loaded axis, respectively. The pad length is 101.6 mm (4.00 in.), giving L/D = 1.00. The pad arc angle is 73º, and the pivot offset ratio is 65%. The preloads of the loaded and unloaded pads are 0.37 and 0.58, respectively. A bulk-flow Navier-Stokes model was used for predictions, using adiabatic conditions for the bearing fluid. Because the model assumes constant nominal clearances at all pads, the average of the measured clearances was used as an estimate. Eccentricities and attitude angles were markedly under predicted while power loss was under predicted at low speeds and very well predicted at high speeds. The maximum detected pad temperature was 71ºC (160ºF) and the rise from inlet to maximum bearing temperature was over predicted by 10-40%. Multiple-frequency force inputs were used to excite the bearing. Direct stiffness and damping coefficients were significantly over predicted, but addition of a simple stiffness-in-series model substantially improved the agreement between theory and experiment. Direct added masses were zero or negative at low speeds and increased with speed up to a maximum of about 50 kg; they were normally greater in the unloaded direction. Although significant cross-coupled stiffness terms were present, they always had the same sign. The bearing had zero whirl frequency ratio netting unconditional stability over all test conditions. Static stiffness in the y direction (obtained from steadystate loading) matched the rotordynamic stiffness Kyy (obtained from multiple-frequency excitation) reasonably at low loads but poorly at the maximum test load.

La rigidité est un des objectifs de performance les plus importants pris en compte lors de la conception de systèmes robotiques. Le contrôle de la raideur physique en cours de tâche est une problématique scientifique en plein essor dans le cadre de la conception innovante de robots à forte polyvalence. L’association d’une structure robotique compliante et d’un composant en alliage à mémoire de forme (AMF) est réalisée dans le but d’obtenir des cartes de compliance variables dans le temps sur un même espace de travail. Les AMF sont en effet des matériaux actifs qui possèdent des caractéristiques comportementales pouvant être exploitées dans cette application. La structure considérée pour l’étude n’a pas de degré de liberté interne mais sa déformation permet de créer un pseudo-espace de travail. Celui-ci diffère selon l’état activé/non-activé de l’AMF. L’intersection des deux espaces obtenus représente alors les positions de l’effecteur où il est possible d’avoir des valeurs de compliance différentes. Les cartes obtenues montrent des caractéristiques intéressantes pour la perspective de la conception de robots polyvalents ayant une nouvelle forme de reconfigurabilité basée sur le changement de propriétés matérielles. / The rigidity is one of the most important performance targets which is taken into account for the design of robotic systems. The control of the physical stiffness during industrial tasks is a scientific issue which is rapidly expanding in the context of the innovative design of highly polyvalent robots. The combination of a compliant robotic structure and a shape memory alloy (SMA) component is carried out in the aim of obtaining variable compliance maps over time and in the same workspace. SMAs are actually active materials with specific thermomechanical properties which can be used in this application. The considered structure has no internal degree of freedom, but the deformation of the arms allows the creation of a “Pseudo-Workspace” (PWS). This PWS varies as a function of the activated/non-activated state of the SMA component. The intersection of the two obtained PWSs represents the effector’s positions where it is possible to have different compliance values. Generated maps show interesting characteristics in the perspective of the design of polyvalent robots based on a new type of reconfigurability (change of material properties).

Cette thèse contribue à l'analyse des raideurs statique et dynamique des robots parallèles à câbles dans un objectif d'amélioration de la précision de positionnement statique et de la précision de suivi de trajectoire. Les modélisations statique et dynamique proposées des câbles considèrent l'effet du poids du câble sur son profil et l'effet de masse du câble sur la dynamique de ce dernier. Sur la base du modèle statique de câble proposé, l'erreur de pose statique au niveau de l'organe terminal du robot est définie et sa variation en fonction de la charge externe appliquée est utilisée pour évaluer la raideur statique globale de la structure. Un nouveau modèle dynamique vibratoire de robots à câbles est proposé en considérant le couplage de la dynamique des câbles avec les vibrations de l'organe terminal. Des validations expérimentales sont réalisées sur des prototypes de robots à câbles. Une série d'expériences de statique, d'analyses modales, d'analyses en régime libre et de suivi de trajectoire sont réalisées. Les modèles statiques et dynamiques proposés sont confirmés. Les dynamiques des câbles et du robot ainsi que leur couplage sont discutées montrant la pertinence des modèles développés pour l’amélioration des performances des robots à câbles en termes de design et le contrôle. Outre l'analyse des raideurs statique et dynamique, les modèles proposés sont appliqués dans l'amélioration du calcul de la distribution des efforts dans les câbles des robots redondants. Une nouvelle méthode de calcul de la distribution des efforts dans les câbles basée sur la détermination de la limite inférieure des forces dans les câbles est présentée. La prise en compte de la dépendance à la position dans l'espace de travail permet de limiter les efforts dans les câbles et ainsi d'améliorer l'efficience des robots d'un point de vue énergétique. / This thesis contributes to the analysis of the static and dynamic stiffness of cable-driven parallel robots (CDPRs) aiming to improve the static positioning accuracy and the trajectory tracking accuracy. The proposed static and dynamic cable modeling considers the effect of cable weight on the cable profile and the effect of cable mass on the cable dynamics. Based on the static cable model, the static pose error of the end-effector is defined and the variation of the end-effector pose error with the external load is used to evaluate the static stiffness of CDPRs. A new dynamic model of CDPRs is proposed with considering the coupling of the cable dynamics and the end-effector vibrations. Experimental validations are carried out on CDPR prototypes. Static experiments, modal experiments, free vibration experiments and trajectory experiments are performed. The proposed static and dynamic models are verified. Cable dynamics, robot dynamics and their coupling are discussed. Results show the relevance of the proposed models on improving the performances of CDPRs in terms of design and control. Besides stiffness analysis, the proposed models are applied on the force distribution of redundant actuated CDPRs. A new method on the calculation of the cable forces is proposed, where the determination of the lower-boundary of the cable forces is presented. The consideration of the pose-dependence of the lower force boundary can minimize the cable forces and improve the energy efficiency of CDPRs.

Tato diplomová práce je zaměřená na stabilizátory u podvozku aut. První část popisuje všeobecné znalosti vlivu naklonění karosérie na jizdní vlastnosti auta a možnosti konstrukčních řešení používaných v praxi. Dále jsou v této části uvedeny nevýhody použití stabilizátoru a jejich náhrady. Nasledující téma se zaměřuje na soutěž Formule Student a její všeobecná pravidla. Hlavní částí této práce je analýza stabilizátoru Formule Ford, na kterou v poslední části této práce navazuje analýza předního a zadního stabilizátoru Formule Student. Byly vytvořené kompletní MBS modely pro přední a zadní zavěšení včetně stabilizátoru. Díky těmto modelům bylo možné provést výpočty klopných tuhostí a pevnostní výpočty. Z těchto výpočtů bylo možné určit vhodné nastavení stabilizátoru. Všechny modely mohou být dále použitelné pro analýzu jízdních vlastností příslušného vozidla.