Spelling suggestions: "subject:"8tress/strain"" "subject:"_stress/strain""
211 |
ELASTICITY OF MAIN CHAIN LIQUID CRYSTAL ELASTOMERS AND ITS RELATIONSHIP TO LIQUID CRYSTAL MICROSTRUCTUREDEY, SONAL 05 December 2013 (has links)
No description available.
|
212 |
MULTISCALE MULTIPHYSICS THERMO-MECHANICAL MODELING OF AN MGB<sub>2</sub> BASED CONDUCTION COOLED MRI MAGNET SYSTEMAmin, Abdullah Al 01 February 2018 (has links)
No description available.
|
213 |
Effect of polymer matrix on the rheology of hydroxapatite filled polyethylene composites.Martyn, Michael T., Joseph, R., McGregor, W.J., Tanner, K.E., Coates, Philip D. January 2002 (has links)
No / The effect of matrix polymer and filler content on the rheological behavior of hydroxyapatite-filled injection molding grade high-density polyethylene (HDPE) has been studied. Studies of the flow curves revealed that the matrix and the composite exhibit three distinct regions in the flow curve, namely, a pseudoplastic region at low to moderate shear rates, a plateau and a second pseudoplastic region at high shear rates. The shear stress corresponding to the plateau (Tc) is dependent on both the filler concentration and the melt temperature. Addition of HA in the HDPE matrix increases the value of Tc and decreases compressibility of the melt. An increase in temperature also raises the value of Tc. From the nature of flow curves it is concluded that the matrix polymer largely decides the rheology of the composite.
|
214 |
Investigation of a thermomechanical process in a high temperature deformation simulator using an FE software : Using LS-DYNA to create a digital twin of the hot deformation simulator Gleeble-3800 GTC Hydrawedge module.Tregulov, Farhad January 2024 (has links)
Thermomechanical processes such as hot rolling have been used in the industry for a long time to process and shape metals to a desired form with specific properties. However it can be difficult to make changes to the different process parameters. That's where it is beneficial to use a hot deformation simulator such as the Gleeble 3800-GTC. It can be used to test metals in a controlled environment where the deformation, temperature and other parameters are easily changed. When the machine uses a Hydrawedge module, it is able to simulate hot rolling using uniaxial compression at high temperatures. Swerim AB has one such machine and has requested to investigate what occurs inside a specimen during testing in the Gleeble, specifically inside two low-alloyed steels with a hardness between 400 and 500 HV. Such tests were replicated using LS-DYNA, an FE software. The goal was to acquire true stress-strain graphs that showed similar behaviour to the data from the Gleeble and plots of the effective plastic strain which could be correlated to the grain structure pattern inside the deformed cylinders. An FE-model was created which replicates the procedure. The model was verified through numerous steps. An initial mesh verification was done where the simulation time took at least 5 hours and at most 86 hours. Using a technique called mass scaling, the elements inside the model were manipulated using additional mass to increase their time step and reduce the computational time. A verification of the mass scaling was done where the computational time was weighed off against accuracy. Afterwards the friction had to be verified where it was found that the Gleeble test specimens were deformed more than necessary which was taken into account and the models were adjusted for friction verification. After all was said and done, the model had a reasonable friction coefficient with an optimal mesh and mass scaling configuration. The resulting model simulated a test of 0.5 seconds in 15 minutes and only costing at most 10 MPa in accuracy when experimental results have maximum values between 110 to 220 MPa depending on the scenario. This equals an approximate error of around 5-10%. When investigating the grain structure after 100 seconds of relaxation, the computational time amounted to 52 hours but could be reduced to 12 hours when simulating 30 seconds as there was no change in the effective plastic strain after that time. The final model has a high enough accuracy which, when combined with the Gleeble, is able to confirm material models and describe what occurs in the material during conditions akin to hot rolling.
|
215 |
Experimental analysis and numerical fatigue modeling for magnesium sheet metalsDallmeier, Johannes 16 September 2016 (has links) (PDF)
The desire for energy and resource savings brings magnesium alloys as lightweight materials with high specific strength more and more into the focus. Most structural components are subjected to cyclic loading. In the course of computer aided product development, a numerical prediction of the fatigue life under these conditions must be provided. For this reason, the mechanical properties of the considered material must be examined in detail. Wrought magnesium semifinished products, e.g. magnesium sheet metals, typically reveal strong basal textures and thus, the mechanical behavior considerably differs from that of the well-established magnesium die castings. Magnesium sheet metals reveal a distinct difference in the tensile and compressive yield stress, leading to non-symmetric sigmoidal hysteresis loops within the elasto-plastic load range. These unusual hysteresis shapes are caused by cyclic twinning and detwinning. Furthermore, wrought magnesium alloys reveal pseudoelastic behavior, leading to nonlinear unloading curves. Another interesting effect is the formation of local twin bands during compressive loading. Nevertheless, only little information can be found on the numerical fatigue analysis of wrought magnesium alloys up to now.
The aim of this thesis is the investigation of the mechanical properties of wrought magnesium alloys and the development of an appropriate fatigue model. For this purpose, twin roll cast AM50 as well as AZ31B sheet metals and extruded ME21 sheet metals were used. Mechanical tests were carried out to present a comprehensive overview of the quasi-static and cyclic material behavior. The microstructure was captured on sheet metals before and after loading to evaluate the correlation between the microstructure, the texture, and the mechanical properties. Stress- and strain-controlled loading ratios and strain-controlled experiments with variable amplitudes were performed. Tests were carried out along and transverse to the manufacturing direction to consider the influence of the anisotropy. Special focus was given to sigmoidal hysteresis loops and their influence on the fatigue life. A detailed numerical description of hysteresis loops is necessary for numerical fatigue analyses. For this, a one-dimensional phenomenological model was developed for elasto-plastic strain-controlled constant and variable amplitude loading. This model consists of a three-component equation, which considers elastic, plastic, and pseudoelastic strain components. Considering different magnesium alloys, good correlation is reached between numerically and experimentally determined hysteresis loops by means of different constant and variable amplitude load-time functions.
For a numerical fatigue life analysis, an energy based fatigue parameter has been developed. It is denoted by “combined strain energy density per cycle” and consists of a summation of the plastic strain energy density per cycle and the 25 % weighted tensile elastic strain energy density per cycle. The weighting represents the material specific mean stress sensitivity. Applying the energy based fatigue parameter on modeled hysteresis loops, the fatigue life is predicted adequately for constant and variable amplitude loading including mean strain and mean stress effects. The combined strain energy density per cycle achieves significantly better results in comparison to conventional fatigue models such as the Smith-Watson-Topper model. The developed phenomenological model in combination with the combined strain energy density per cycle is able to carry out numerical fatigue life analyses on magnesium sheet metals.
|
216 |
Deformačně-napěťová analýza aneurysmatu břišní aorty / Stress-strain analysis of abdominal aortic aneurysmRyšavý, Pavel January 2011 (has links)
This thesis deals with problems of biomechanics of soft tissues, namely of stress-strain analysis of abdominal aortic aneurysm (AAA). The introduction describes briefly the possibility of aneurysm occurrence with a focus on an aneurysm in the abdominal aorta.
|
217 |
Biomechanická studie ruky / Biomechanical study of handKrpalek, David Unknown Date (has links)
This work deals with issue of human wrist and appropriate total wrist implant allowing a restoration of hand mobility approaching physiological condition after traumatic and degenerative diseases. Treating these diseases are very complex. These issues including a biological and medical issues. To determine the appropriate treatment method and select right total wrist implant is important to know the behavior the human wrist at all stages in terms of medical and biomechanical. For this reason, it was developed a biomechanical study including computation model of human wrist allowing solution of strain and stress of hand in physiological and pathological conditions and condition after total wrist implant. The frost remodeling of bone tissue was used for analysis of human wrist bone tissues and bone tissues after application of total wrist implant RE-MOTION™ Total Wrist.
|
218 |
SFB 528: Textile Bewehrungen zur Bautechnischen Verstärkung und Instandsetzung / CRC 528: Textile Reinforcements for Structural Strengthening and Repair. Report for the period II/1999-I/2002Curbach, Manfred 04 September 2005 (has links) (PDF)
Durch die beanspruchungsgerechte Anordnung von Fasermaterialien wie Glas oder Carbon mit hervorragenden Trageigenschaften entstehen technische Textilien, die in eine Betonmatrix eingebracht werden können, so daß ein neuer, innovativer Verbundwerkstoff entsteht, der sowohl bei der Herstellung neuer Betonbauteile verwendet werden kann als auch für den Einsatz in der Instandsetzung und Verstärkung bestehender Bauwerke geeignet ist. Da die verwendeten Materialien im Gegensatz zum Stahl nicht korrosionsempfindlich sind und gleichzeitig hohe Festigkeiten aufweisen, können Verstärkungen aus textilbewehrtem Beton mit sehr geringen Abmessungen ausgeführt werden. Bei Holzkonstruktionen können textile Verstärkungen die durch die Anisotropie bedingten Festigkeits- und Steifigkeitsunterschiede kompensieren und die Dauerhaftigkeit erhöhen. Bei Verzicht auf Knotenbleche aus Stahl und durch Applikation von textilen Strukturen können beachtliche Steigerungen der Tragfähigkeit und der Duktilität von Verbindungen erreicht werden. In den fünf Projektbereichen werden in theoretischen und experimentellen Untersuchungen die Grundlagen für die Werkstoffe, die mechanische Beschreibung, die konstruktive Durchbildung und die Bemessung, die technologische Aufbringung, bautechnische Umsetzung und die Langzeiteigenschaften und damit für die Sicherheit und die Lebensdauer bei der Verwendung textiler Bewehrungen für die Instandsetzung und Verstärkung geschaffen. / The stress-oriented arrangement of fibre materials, such as glass or carbon, which have an excellent load-bearing capacity, leads to technical textiles that may be incorporated into a concrete matrix. So a new, innovative composite material is produced, which can be used for the production of new concrete members and also for the restoration and strengthening of existing structures. As the materials used are noncorrosive compared to steel and as they show great strength at the same time, textile-reinforced concrete can be used for strengthening tasks of small dimensions. With regard to timber structures, textile reinforcement can compensate the strength and stiffness differences caused by anisotropy and can increase durability. If textile structures are used instead of steel gussets this may lead to a considerable increase in the ultimate strength and the ductility of joints. The five fields of the project are designed that theoretical and experimental investigations are carried out to provide the fundamentals of the materials. Additionally information will be obtained about the mechanical description, the detailing and the dimensioning, the techniques of applying, the realisation on the site and the long-term behaviour. All leading to a safety concept and also a service life concept for the use of textile reinforcements for restoration and strengthening.
|
219 |
Mechanisms of the interaction between continuous and short fibres in textile-reinforced concrete (TRC) / Mechanismen der Wechselwirkungen zwischen Endlos- und Kurzfasern in textilbewehrtem BetonBarhum, Rabea 12 September 2014 (has links) (PDF)
This thesis reports on experimental investigations of the mechanisms inherent in the joint action of short and continuous fibres in high-performance, cement-based composites. Experiments on different levels of observation (macro- meso- and micro-levels) were performed to provide detailed insights into the various effects of adding different types of short fibres (dispersed AR glass, integral AR glass and dispersed carbon fibres) on the strength, deformation, and failure behaviour of textile-reinforced concrete (TRC) subjected to tensile loading. Moreover, visual inspections of the specimens' surfaces and microscopic investigation of the fracture surfaces and the interface zone between fibre and matrix were performed and evaluated. Subsequently, the mathematical descriptions for TRC with short fibres under deformation controlled tensile loading conditions were derived based on a multi-scale rheological-statistical modelling approach.
Based on a literature review, the state of the art is presented and discussed to identify key questions that are yet to be answered satisfactorily. This provides the starting point for the investigations presented in this thesis.
The experimental program on the macro-level included uniaxial tension tests performed on thin, narrow plates reinforced by: a) only textile reinforcement, b) only short fibres, and c) hybrid reinforcement (both textile reinforcement with the addition of short fibres). Special attention was directed toward the course of the stress-strain relationship, crack pattern development, and fibre failure behaviour.
The stress-strain curves resulting from uniaxial tension testing demonstrated clearly the positive influence of all types of short fibre on the mechanical performance of TRC. While the first-crack stress in TRC specimens increased significantly due to the addition of short fibres, an expansion of the strain region, where multiple cracks form, was observed for the stress-strain curves for TRC with added short fibres. The visual inspection of the specimens\' surfaces showed a higher number of cracks and finer crack patterns for given strain levels in the cases when short fibres were added to TRC. Moreover, depending on fibre type, the positive effects of the addition of short fibres on both tensile strength and work-to-fracture of the composite were found to vary significantly.
The findings at the micro- and meso-levels of observation provided to a great extent a core of understanding of some particular mechanical behavioural properties of TRC with short fibres at the macro-level of observation. Thus, in addition to the experimental testing performed on composite materials with different parameter combinations, investigations of the action of individual material components, i.e., multifilament-yarns and single short fibres, embedded into cement-based matrices were carried out.
It was found that short fibres indeed improve the bond between multifilament-yarns and the surrounding matrix. By their random positioning on the yarn\'s surface, short fibres built new adhesive cross-links which provided extra connecting points to the surrounding matrix. Furthermore, the water-to-binder ratio of the matrix influenced bond quality between fibre and matrix, i.e., various degrees of matrix-fibre bond were observed. As a result, the mechanical behaviour of the composite varied with w/b: While the good bond of the fibre embedded in a matrix with a low water-to-binder ratio leads to increase in stiffness and strength of the composite, fibres with weak bonding can be considered as defects with respect to stiffness as they lead to a decrease in the value.
The thesis further derives the mathematical relationships for TRC with the addition of short fibres under deformation-controlled tensile loading. A physically based rheological model consisting of simple rheological elements was developed based on the experimental results on the micro-scale, using single-fibre pullout tests. Special attention was paid to the gradual de-bonding process and the resulting force-displacement branch. The model adequately reproduced both relevant fibre failure scenarios: fibre fracture and fibre pullout.
By means of statistical procedures the combination of these models led to description of the stress-crack opening behaviour of an individual crack bridged by the given number of short fibres.
The stress-strain relation for TRC with short fibres subjected to tensile loading was then derived. The concept followed at the macro-level of observation was modelling separately the three main regions of the characteristic stress-strain curve. The regions of crack-free material and crack-widening were considered linear and described based on the corresponding characteristic values of each region. The behaviour of the multiple cracking region was derived by considering an increasing number of cracks in serial interconnection and the contribution of the uncracked matrix in between. The stress transfer, i.e., bridging stress, across the crack was determined based on the contribution of both short fibres and multifilament-yarns. Behaviour of individual cracks was adjusted by varying the number of bridging fibres in different cracks and by varying the yarn bridging stress according to range observed in the pullout experiments. / In der vorliegenden Arbeit wird über Untersuchungen zu den Mechanismen der Wechselwirkungen zwischen Kurz- und Endlosfasern in zement-basierenten Hochleistungskompositen berichtet. Hierzu wurden experimentelle Untersuchungen auf verschiedenen Betrachtungsebenen (Makro-, Meso- und Mikroebene) durchgeführt mit dem Ziel, detaillierte Erkenntnisse zu den Auswirkungen der Zugabe von verschiedenen Arten von Kurzfasern (disperse und integrale AR-Glasfasern, Kohlenstofffasern) hinsichtlich des Festigkeits-, Verformungs- und Bruchverhaltens von Textilbeton (engl.: textile-reinforced concrete = TRC) unter Zugbeanspruchung zu gewinnen. Die Bruchflächen sowie die Gestalt der Interphase zwischen der Bewehrung aus Textilien oder Kurzfasern und der umhüllenden zemengebundenen Matrix wurden mit optischen und elektronenmikroskopischen Verfahren hinsichtlich der Wechselwirkungsphänomene ausgewertet. Die Ergebnisse der experimentellen Arbeiten bildeten den Ausgangspunkt für die mathematischen Beschreibungen für TRC mit Kurzfasern unter verformungsgesteuerter Zugbelastung. Die Formulierungen erfolgten auf Grundlage multiskalarer rheologisch-statistischer Modellansätze.
In einer Literatursichtung wurde zunächst der Kenntnisstand zu den Materialien und zum Verhalten von TRC und Faserbeton unter Zugbeanspruchung dargestellt und diskutiert. Die noch zu erforschenden Fragen wurden präzisiert und die Grundlagen für deren Untersuchung geschaffen.
Bei den Experimenten auf der Makroebene wurden drei Bewehrungsvarianten betrachtet: a) textile Bewehrung, b) Kurzfaserbewehrung, und c) hybride Bewehrung (Textil und Kurzfasern). An Dehnkörpern wurde die Spannungs-Dehnungsbeziehung unter einachsiger Zugbelastung studiert und dabei das Rissbild und die Phänomene des Faserversagens detailliert beobachtet. Anhand der Spannungs-Dehnungsbeziehungen konnte gezeigt werden, dass die Zugabe von Kurzfasern bei allen untersuchten Kurzfaserarten zu einer erheblichen Verbesserung der Leistungsfähigkeit von Textilbeton führt. Dies zeigte sich unter anderem in einer ausgeprägten Anhebung der Erstrissspannung sowie der Entwicklung von zahlreicheren und damit feineren Rissen, die zu einer Verbesserung der Duktilität führten. Ebenso wurden Steigerungen der Zugfestigkeit und der Energiedissipation festgestellt. In welchem Maß diese Änderungen stattfinden, hängt von der Art der Kurzfasern ab.
Die Experimente auf der Mikro- und Mesoebene wurden so konzipiert, dass sie die Erkundung der Mechanismen, die den auf der Makroebene beobachteten Phänomenen zugrunde liegen, unterstützten. Auf der Mesoebene wurden Mulitifilamentgarnauszugversuche (mit und ohne Kurzfasern in der Matrix) und auf der Mikroebene Einzelfaserauszugsversuche für alle betrachteten Kurzfasertypen durchgeführt.
Es wurde festgestellt, dass die Kurzfasern den Verbund zwischen Matrix und Multifilamentgarn verbessern. Kurzfasern können bei zufälliger Positionierung an der Garnoberfläche zusätzliche Haftbrücken bzw. Verbindungsstellen zu umgebender Matrix bilden. Für die Verbundqualität zwischen Faser und Matrix ist der Wasser-Bindemittel-Wert (W/B-Wert) von entscheidender Bedeutung. Bei einer Matrix mit niedrigem W/B-Wert führt die gute Qualität des Verbunds der eingebetteten Fasern zu einer Erhöhung der Steifigkeit sowie der Festigkeit des Komposites. Bei hohem W/B-Wert haben die Fasern einen schlechten Verbund zur Matrix und müssen überwiegend als Fehl- bzw. Schwachstellen betrachtet werden. Festigkeit und Steifigkeit des Komposits nehmen daher ab.
Die Ableitung mathematischer Beziehungen für Textilbeton mit Zugabe von Kurzfasern unter verformungsgesteuerter Zugbelastung erfolgte aufbauend auf den Ergebnissen der experimentellen Untersuchungen auf der Mikroebene. Die Einzelfaserauszugsversuche wurden mit Hilfe eines physikalisch basierten Modelles nachgebildet, das aus einfachen rheologischen Elementen besteht. Phänomene wie die graduelle Ablösung der Faser, Faserbruch und Faserauszug wurden durch eine entsprechende Kombination und Parametrierung der rheologischen Elemente abgebildet. Im Ergebnis wurden zutreffende Kraft-Rissöffnungsbeziehungen modelliert.
Auf der Mesoebene wurde ein einzelner Riss modelliert, der sowohl durch Multifilamentgarne als auch Kurzfasern überbrückt werden kann. Der rissüberbrückenden Wirkung der zahlreichen Kurzfasern wurde mit Hilfe statistischer Methoden rechnung getragen, die unterschiedliche Faser-Risswinkel und Einbindelängen berücksichtigen. Die resultierende Spannungs-Rissöffnungskurve umfasst die rissüberbrückende Wirkung von Multifilamentgarnen und Kurzfasern.
Auf der Makroebene kann die charakteristische Spannungs-Dehnungsbeziehung von TRC unter Zugbelastung in 3 Bereiche (Zustände I, IIa, IIb) unterteilt werden. Die Kurvenverläufe im Zustand I (ungerissenen) sowie Zustand IIb (abgeschlossenes Rissbild) wurden als linear betrachtet und basierend auf den entsprechenden charakteristischen Werten des jeweiligen Zustands beschrieben. Das Verhalten im Zustand IIa (multiple Rissbildung) wurde durch die Reihenschaltung einer zunehmenden Anzahl von Rissen sowie den Beitrags der ungerissenen Matrix zwischen den Rissen modelliert.
|
220 |
Local buckling behaviour and design of cold-formed steel compression members at elevated temperaturesLee, Jung Hoon January 2004 (has links)
The importance of fire safety design has been realised due to the ever increasing loss of properties and lives caused by structural failures during fires. In recognition of the importance of fire safety design, extensive research has been undertaken in the field of fire safety of buildings and structures especially over the last couple of decades. In the same period, the development of fire safety engineering principles has brought significant reduction to the cost of fire protection. However the past fire research on steel structures has been limited to heavier, hot-rolled structural steel members and thus the structural behaviour of light gauge cold-formed steel members under fire conditions is not well understood. Since cold-formed steel structures have been commonly used for numerous applications and their use has increased rapidly in the last decade, the fire safety of cold-formed steel structural members has become an important issue. The current design standards for steel structures have simply included a list of reduction factors for the yield strength and elasticity modulus of hot-rolled steels without any detailed design procedures. It is not known whether these reduction factors are applicable to the commonly used thin, high strength steels in Australia. Further, the local buckling effects dominate the structural behaviour of light gauge cold-formed steel members. Therefore an extensive research program was undertaken at the Queensland University of Technology to investigate the local buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. The first phase of this research program included 189 tensile coupon tests including three steel grades and six thicknesses to obtain the accurate yield strength and elasticity modulus values at elevated temperatures because the deterioration of the mechanical properties is the major parameter in the structural design under fire conditions. The results obtained from the tensile tests were used to predict the ultimate strength of cold-formed steel members. An appropriate stress-strain model was also developed by considering the inelastic mechanical characteristics. The second phase of this research was based on a series of more than 120 laboratory experiments and corresponding numerical analyses on cold-formed steel compression members to investigate the local bucking behaviour of the unstiffened flange elements, stiffened web elements and stiffened web and flange elements at elevated temperatures up to 800°C. The conventional effective design rules were first simply modified considering the reduced mechanical properties obtained from the tensile coupon tests and their adequacy was studied using the experimental and numerical results. It was found that the simply modified effective width design rules were adequate for low strength steel members and yet was not adequate for high strength cold-formed steel members due to the severe reduction of the ultimate strength in the post buckling strength range and the severe reduction ratio of the elasticity modulus to the yield strength at elevated temperatures. Due to the inadequacy of the current design rules, the theoretical, semi-empirical and empirical effective width design rules were developed to accurately predict the ultimate strength of cold-formed steel compression members subject to local buckling effects at elevated temperatures. The accuracy of these new design methods was verified by comparing their predictions with a variety of experimental and numerical results. This thesis presents the details of extensive experimental and numerical studies undertaken in this research program and the results including comparison with simply modified effective width design rules. It also describes the advanced finite element models of cold-formed steel compression members developed in this research including the appropriate mechanical properties, initial imperfections, residual stresses and other significant factors. Finally, it presents the details of the new design methods proposed for the cold-formed steel compression members subject to local buckling effects at elevated temperatures.
|
Page generated in 2.712 seconds