In this thesis we examine intra-seasonal oscillations (ISO) in the aqua-planet setup of the Community Atmospheric Model (CAM) version 5.1, mainly based on July and January climatological sea surface temperature (SST). We investigate mainly two questions -what should be the SST distribution for the existence of (a) northward moving ISO in summer, and (b) eastward moving MJO-like modes in winter. In the first part of the thesis we discuss the northward propagation. A series of experiments were performed with zonally symmetric and asymmetric SST distributions. The basic lower boundary condition is specified from zonally averaged observed July and January SST. The zonally symmetric July SST experiment produced an inter tropical convergence zone (ITCZ) on both sides of the equator. Poleward movement is not clear, and it is confined to the region between the double ITCZ. In July, the Bay of Bengal (BOB) and West Pacific SST is high compared to the rest of the northern tropics. When we impose a zonally asymmetric SST structure with warm SST spanning about 80 of longitude, the model shows a monsoon-like circulation, and some northward propagating convective events. Analysis of these events shows that two adjacent cells with cyclonic and anticyclonic vorticity are created over the warm SST anomaly and to the west. The propagation occurs due to the convective region drawn north in the convergence zone between these vortices. Zonally propagating Madden-Julian oscillations (MJO) are discussed in the second part of the thesis. All the experiments in this part are based on the zonally symmetric SST. The zonally symmetric January SST configuration gives an MJO-like mode, with zonal wave number 1 and a period of 40-90 days. The SST structure has a nearly meridionally symmetric structure, with local SST maxima on either side of the equator, and a small dip in the equatorial region. If we replace this dip with an SST maximum, the time-scale of MJO becomes significantly smaller (20-40 days). The implication is that an SST maximum in the equatorial region reduces the strength of MJO, and a flat SST profile in the equatorial region is required for more energetic of MJO. This result was tested and found to be valid in a series of further experiments.

Ce travail de thèse s'inscrit dans le cadre d'un projet de recherche entre le CEA et ARMINES (Centre LGEI/ Ecole des Mines d'Alès). Il vise à améliorer la connaissance des mécanismes physiques se produisant lorsque qu’une nappe de liquide (inflammable et/ou toxique stocké à pression atmosphérique) s’évapore suite à la rupture de son stockage. La démarche expérimentale employée consiste à réaliser un plan d'expériences visant à exprimer le débit d'évaporation initial d’une nappe sous différentes conditions initiales de température de liquide et de sol, sous différentes vitesse d’écoulement, de température d’air et selon différentes épaisseurs initiales de liquide. Les différents flux thermiques échangés entre la nappe et son environnement, la température de la nappe et le débit d'évaporation sont mesurés et quantifiés.Les débits d'évaporation expérimentaux sont confrontés à ceux prédits par les différentes corrélations disponibles dans la littérature. Deux analyses de sensibilité sont également réalisées sur ces corrélations et les résultats confrontés à ceux du plan d'expériences afin de vérifier si les corrélations attribuent le même poids aux différents paramètres expérimentaux que le phénomène en lui-même.Les relevés de température dans l'épaisseur de la nappe mettant en évidence la présence de cellules de convection naturelle est également étudiée. Par ailleurs, la température moyenne de la surface est déterminée à partir des différents flux thermiques échangés entre la nappe et son environnement.A l'aide des résultats obtenus, l'étude de plusieurs éléments a été réalisée: l’écart de prédiction sur les résultats des équations bilan thermique et massique selon la température employée pour les incrémenter, la nette différence de température entre la surface et le coeur du liquide, rarement prise en compte dans les modèles théoriques, le rôle prépondérant de la convection naturelle dans le phénomène d'évaporation.Un dernier chapitre étudie la dispersion de la température de surface (phénomène peu étudié dans la littérature) à l'aide d'une caméra thermique. Des zones de températures homogènes apparaissent alors dans le cas de l'essai mettant en oeuvre un écoulement de cavité au-dessus du liquide. La présence de différentes zones de température implique que la cinétique d’évaporation n’est pas uniforme sur la surface de la nappe. A partir de ces résultats, le coefficient de transfert de matière est étudié en fonction de la régression du niveau de liquide dans le bac et conclut à une diminution non modélisée par les corrélations existantes. / This work belongs to a research project between CEA and ARMINE (LGEI center/ Ecole des Mines d’Alès). It aims at increasing comprehension of physical mechanism generating when a liquid pool (either flammable or toxic parked under atmospheric pressure) evaporates after loss of containment. An experimental design is realized in order to express some characteristics of evaporation phenomena (initial evaporation rate, steady evaporation rate and duration of unsteady evaporation rate) as a function of initial liquid and soil temperature, wind velocity, air temperature and initial liquid thickness. Heat fluxes exchanged between the pool and its environment are either measure or computed.Experimental evaporation rates are compared to those predicted by correlations available in the literature. Two sensitivity analyses are performed and their results are confronted to those from experimental design. It allows determining if the importance of the different experimental parameters is the same from the correlations to the phenomena itself.Temperature measurements in liquid thickness highlight the presence of natural convection cells. Besides, mean surface temperature is computed from measurements of heat fluxes exchanged between the pool and its environment. From the different results, several points are investigated: the shift between heat and mass balance equations according to the temperature employed to compute them the difference between the liquid bulk and liquid surface temperature, barely taken into account in correlations the noteworthy role of natural convection in the evaporation phenomena.A last chapter studies the surface temperature distribution thanks to an infrared thermometer. Homogeneous temperatures areas appear in the case of cavity flows. The presence of different temperature areas implies that evaporation kinematic in not uniform in the whole surface. From these result the mass transfer coefficient is studied as a function of the step height between the top of the cavity and the liquid surface. It concludes to a mass transfer coefficient decrease non modeled by the different correlations in the literature.

his Diploma thesis deals with non-contact measurement of surface temperatures. Describes the basic physical principles by which individual instruments are designed, their technical parameters and compares the different types. It deals with the applications of this technology in various fields of human activity and especially its use in engineering.

In metallurgy it is important to know a cooling efficiency of a product as well as cooling efficiency of working rolls to maximize the quality of the product and to achieve the long life of working rolls. It is possible to examine this cooling efficiency by heat transfer coefficients and surface temperatures. The surface temperature is hardly measured during the cooling. It is better to compute it together with heat transfer coefficient by inverse heat conduction problem. The computation is not easy and it uses estimated values which are verified by direct heat conduction problem. The time-consuming of this task can be several days or weeks, depends on the complexity of the model. Thus there are tendencies to shorten the computational time. This doctoral thesis considers the possible way of the computing time shortening of inverse heat conduction problem, which is the parallelization of this task and its transfer to a graphic card. It has greater computing power than the central processing unit (CPU). One computer can have more compute devices. That is why the computing time on different types of devices is compared in this thesis. Next this thesis deals with obtaining of surface temperatures for the computation by infrared line scanner and using of inverse heat conduction problem for the computing of the surface temperature and heat transfer coefficient during passing of a test sample under cooling section and cooling by high pressure nozzles.

This theses deals with a structural design comparison of heat insulations implementation in flat roofs in light of heat engineering. It also adverts to possible structural design in terms of heat insulations distribution in a flat roof. There are many materials options. I show the possibilities of material solution and also advantages and disadvantages of the single sealing materials at these layers. In the aplication part of this thesis I deal with possible concepts of insulation and solution for a specific roof of an older apartment house in Brno, where I conducted a constructive exploration. There was developed and evaluated a few options of solutions considering the heat insulator used. The following computational programs were used for the evaluations: TEPLO, AREA, CUBE 3D.

<div><br></div><div>Extreme heat is one of the deadliest health hazards that is projected to increase in intensity and persistence in the near future. Temperatures are further exacerbated in the urban areas due to the Urban Heat Island (UHI) effect resulting in increased heat-related mortality and morbidity. However, the spatial distribution of urban temperatures is highly heterogeneous. As a result, metrics such as UHI Intensity that quantify the difference between the average urban and non-urban air temperatures, often fail to characterize this spatial and temporal heterogeneity. My objective in this thesis is to understand and characterize the spatio-temporal dynamics of UHI for cities across the world. This has several applications, such as targeted heat mitigation, energy load estimation, and neighborhood-level vulnerability estimation.</div><div><br></div><div>Towards this end, I have developed a novel multi-scale framework of identifying emerging heat clusters at various percentile-based thermal thresholds T_thr and refer to them collectively as <i>intra-Urban Heat Islets</i>. Using the Land Surface Temperatures from Landsat for 78 cities representative of the global diversity, I have showed that the heat islets have a fractal spatial structure. They display properties analogous to that of a percolating system as T_thr varies. At the percolation threshold, the size distribution of these islets in all cities follows a power-law, with a scaling exponent = 1.88 and an aggregated Area-Perimeter Fractal Dimension =1.33. This commonality indicates that despite the diversity in urban form and function across the world, the urban temperature patterns are different realizations with the same aggregated statistical properties. In addition, analogous to the UHI Intensity, the mean islet intensity, i.e., the difference between mean islet temperature and thermal threshold, is estimated for each islet, and their distribution follows an exponential curve. This allows for a single metric (exponential rate parameter) to serve as a comprehensive measure of thermal heterogeneity and improve upon the traditional UHI Intensity as a bulk metric.</div><div><br></div><div><br></div><div>To study the impact of urban form on the heat islet characteristics, I have introduced a novel lacunarity-based metric, which quantifies the degree of compactness of the heat islets. I have shown that while the UHIs have similar fractal structure at their respective percolation threshold, differences across cities emerge when we shift the focus to the hottest islets (T_thr = 90^th percentile). Analysis of heat islets' size distribution demonstrates the emergence of two classes where the dense cities maintain a power law, whereas the sprawling cities show an exponential deviation at higher thresholds. This indicates a significantly reduced probability of encountering large heat islets for sprawling cities. In contrast, analysis of heat islet intensity distributions indicates that while a sprawling configuration is favorable for reducing the mean Surface UHI Intensity of a city, for the same mean, it also results in higher local thermal extremes. </div><div><br></div><div>Lastly, I have examined the impact of external forcings such as heatwaves (HW) on the heat islet characteristics. As a case study, the European heatwave of 2018 is simulated using the Weather Research Forecast model with a focus on Paris. My results indicate that the UHI Intensity under this HW reduces during night time by 1^oC on average. A surface energy budget analysis reveals that this is due to drier and hotter rural background temperatures during the HW period.</div><div>To analyze the response of heat islets at every spatial scale, power spectral density analysis is done. The results show that large contiguous heat islets (city-scale) persist throughout the day during a HW, whereas the smaller islets (neighborhood-scale) display a diurnal variability that is the same as non-HW conditions. </div><div><br></div><div>In conclusion, I have presented a new viewpoint of the UHI as an archipelago of intra-urban heat islets. Along the way, I have introduced several properties that enable a seamless comparison of thermal heterogeneity across diverse cities as well as under diverse climatic conditions. This thesis is a step towards a comprehensive characterization of heat from the spatial scales of an urban block to a megalopolis.</div><div><br></div>

This thesis presents a new template for multidisciplinary habitat mapping that combines the analyses of seafloor geomorphology, oceanographic proxies and modelling of associated biologic features. High resolution swath bathymetry of the Faial and western Pico shelves is used to present the first state-of-the-art geomorphologic assessment of submerged island shelves in the Azores. Solid seafloor structures are described in previously unreported detail together with associated volcanic, tectonic and erosion processes. The large sedimentary expanses identified in the area are also investigated and the large bedforms identified are discussed in view of new data on the local hydrodynamic conditions. Coarse-sediment zones of types hitherto unreported for volcanic island shelves are described using swath data and in situ imagery together with sub-bottom profiles and grainsize information. The hydrodynamic and geological processes producing these features are discussed. New oceanographic information extracted from satellite imagery is presented including yearly and seasonal sea surface temperature and chlorophyll-a concentration fields. These are used as proxies to understand the spatio-temporal variability of water temperature and primary productivity in the immediate island vicinity. The patterns observed are discussed, including onshore-offshore gradients and the prevalence of colder/more productive waters in the Faial-Pico passage and shelf areas in general. Furthermore, oceanographic proxies for swell exposure and tidal currents are derived from GIS analyses and shallow-water hydrographic modelling. Finally, environmental variables that potentially regulate the distribution of benthic organisms (seafloor nature, depth, slope, sea surface temperature, chlorophyll-a concentration, swell exposure and maximum tidal currents) are brought together and used to develop innovative statistical models of the distribution of six macroalgae taxa dominant in the infralittoral (articulated Corallinaceae, Codium elisabethae, Dictyota spp., Halopteris filicina, Padina pavonica and Zonaria tournefortii). Predictive distributions of these macroalgae are spatialized around Faial island using ordered logistic regression equations and raster fields of the explanatory variables found to be statistically significant. This new approach represents a potentially highly significant step forward in modelling benthic communities not only in the Azores but also in other oceanic island shelves where the management of benthic species and biotopes is critical to preserve ecosystem health.

La zone économique exclusive Mauritanienne est le siège d’upwelling et constitue une zone de transition où cohabitent des espèces d’affinités tempérée et tropicale. Pour comprendre le comportement spatio-temporel des assemblages démersaux du point de vue de leur composition, structuration, distribution de probabilité et diversité face aux préoccupations écologiques. Les facteurs abiotiques contribuent à la structuration des assemblages démersaux persistants au cours du temps. Les effets de la pêche étaient relativement faibles. Les trajectoires temporelles entre les assemblages et les conditions environnementales ont été mises en évidence pour certaines années et des zones. Dans les types d’habitats, un groupe minoritaire d’espèces très agrégatives obéissant au modèle de distribution en log-séries de Fisher et un autre majoritaire peu ou pas du tout agrégatives obéissant au modèle de distribution binomiale négative tronquée ont été identifiés. La diversité spécifique peut être divisé en deux groupes distincts et complémentaires : la richesse spécifique et l'autre associé à l’équitabilité. Un seul composant de la diversité ne peut donc pas représenter la diversité des poissons démersaux de la zone étudiée. Les GLM des indices complémentaires ont montré essentiellement un effet temporel et l’interaction Année-Strates bathymétriques. Aucun effet de l’effort de pêche n’a été observé sur la richesse spécifique, ni de la concentration en chlorophylle sur l’équitabilité. Ce travail pourrait fournir aux gestionnaires et aux scientifiques des connaissances complémentaires sur la dynamique spatio-temporelle des assemblages démersaux exploités dans des écosystèmes d’upwelling. / The Mauritanian exclusive economic zone is the seat of an upwelling phenomenon and constitutes a transition zone where species of temperate and tropical affinities coexist. To understand the spatio-temporal behavior of demersal assemblages from the point of view of their composition, structure, distribution of probability and diversity faced to ecological concerns. Abiotic factors contribute in the structuring of persistent groundfish assemblages over time. The fishing effects were relatively low, although significant in some years and in some specific geographic areas. Temporal trajectories between groundfish assemblages and environmental conditions have been highlighted for some years and in some specific areas. In each type habitats, two species groups were identified: a minority group of species very aggregative well fitted by Fisher’s log-series distribution and another majority of species little or not aggregative well fitted by the truncated negative binomial distribution. Diversity indices analyzed reveal that this set can be split into two distinct and complementary groups: a group associated with the species richness and another group associated with evenness. One component of diversity may not represent the diversity of the groundfish in the study area. GLMs of complementary indices showed essentially a temporal effect and Bathymetric strata-Year interaction. No effect of fishing effort was observed on the species richness and neither was the concentration of chlorophyll a on the evenness. This work could provide managers and scientists to further knowledge on the spatio-temporal dynamics of groundfish species assemblages exploited in upwelling ecosystems.

The quantification and description of sea surface temperature (SST) is critically important because it can influence the distribution, migration, and invasion of marine species; furthermore, SSTs are expected to be affected by climate change. Recent research indicates that there has been a warming trend in ocean temperatures over the last 50 years. Hence, we sought to identify and demonstrate how a particularly germane SST dataset can be used within the scope of global climate change research. For this project we assembled a 29-year nearshore time series of mean monthly SSTs along the North Pacific coastline, as well as mean monthly SSTs for ice-free regions of the Arctic, using remotely-sensed satellite data collected with the Advanced Very High Resolution Radiometer (AVHRR) instrument. By providing detailed information concerning both dataset generation and data limitations, we aimed to make these data comprehensible to an expanded audience concentrating on life sciences rather than the traditionally physical science-based community. Furthermore, by making these data freely and publically available in multiple formats, including GIS (geographic information systems) layers, we expand their visibility and the extent of their use. We then used the dataset to describe SST patterns of nearshore (< 20 km offshore) regions of 16 North Pacific ecoregions, and of ice-free regions of 20 Arctic ecoregions, as delineated by the Marine Ecoregions of the World (MEOW) hierarchical schema. Our work creates a better understanding of present temperature regimes in these critically sensitive areas, from which we can draw several basic conclusions. 1) AVHRR SST measurements alone are sufficient to identify temperature patterns pertinent to determining health of ecosystems; 2) Within the nearshore North Pacific, ecoregions along the California Current System are most vulnerable to habitat-altering SST changes; 3) sea ice distribution is a major factor affecting SSTs in Arctic ecoregions, causing concern for the welfare of Arctic species. / Graduation date: 2012

科学研究費補助金 研究種目:試験研究(B)(1) 課題番号:05555158 研究代表者:谷川 恭雄 研究期間:1993-1994年度