Ces dernières années, un nouveau type de polymère donneur d’électron pour des applications photovoltaïques a été étudié de manière intensive, les copolymères à faible bande interdite. Ils sont constitués d’un groupement riche en électron (ER) et d’un groupement pauvre (EP) permettant de contrôler les orbitales frontières et d’induire une délocalisation de l’exciton généré lors du processus de photo-excitation. Une large variété de dispositifs est basée sur ces copolymères avec des rendements d’environ 10% et, pour accroitre leur efficacité, il est nécessaire d’avoir une meilleure compréhension de ces polymères pendant le phénomène de photo-absorption. La chimie théorique apparait comme un outil permettant de prédire différentes propriétés optoélectroniques. Au cours de ce travail, nous avons utilisé la théorie de la fonctionnelle de la densité indépendante (DFT) et dépendante du temps (TD DFT) pour simuler les propriétés optiques d’oligomères de taille croissante avec différents groupements ER et EP. Les propriétés optiques des polymères correspondant ont été extrapolées à l’aide du modèle de Kuhn. Ce criblage théorique nous a permis de sélectionner des systèmes prometteurs à base de benzodithiophène, de benzothiadiazole et de benzofurazane qui ont ensuite été synthétisés par couplage de Stille. Les polymères et oligomères obtenus ont été caractérisés par spectroscopie UV-visible et de fluorescence, chromatographie d’exclusion stérique et par RMN dans le but d’observer des relations structure-propriétés et de faire des corrélations entre résultats expérimentaux et théoriques. / During the last decade, a new kind of donor polymers for photovoltaic application have been intensively studied, the low band-gap polymers. They are based on repeating units associating two different moieties, one electron-rich (ER) and one electron-poor (EP), which allow to finely tune the molecular orbitals and to induce a delocalization of the exciton generated upon the photo-excitation process. A large variety of devices are based on such low band-gap polymers, with a power conversion efficiency record around 10%, and, to increase the efficiency, it is necessary to have a better understanding of these polymers during the photo-absorption phenomenon. Computational chemistry isa powerful tool that permits to predict different opto-electronic properties. For this work, we used Density Functional Theory and Time-Dependent Density Functional Theory to compute the optical properties of increasingly large oligomers involving various ER and EP subunits. The optical properties in the polymer limit were then estimated for the different systems by using an extrapolation scheme based on the Kuhn equation. This theoretical screening allowed us to select promising candidates based on benzodithiophene, benzothiadiazole and benzofurazan for syntheses, which were performed by a Stille coupling. The obtained polymers and size-controlled oligomers were further characterized by UV visible spectroscopy, fluorescence, size exclusion chromatography and NMR, in order to extractstructure-properties relationships and correlate experimental results to theoretical data.

Depuis la fin des années 80 et l'avènement de la femto-chimie nous pouvons sonder la dynamique nucléaire à l’œuvre au cours de réactions chimiques à l'échelle de la femtoseconde. Plus récemment, la production d'impulsions lasers attosecondes isolées permet d'atteindre une résolution temporelle plus grande encore. Par elle, il devient possible de sonder la dynamique d'origine purement électronique induite par photo-excitation, et notamment photo-ionisation. Dans ce contexte, avec le développement des techniques de spectroscopie résolue en temps, il est important de disposer d'approches théoriques fiables aidant à l'appréhension de résultats toujours plus nombreux dans ce domaine. La tâche et néanmoins rendue difficile par le caractère profondément multi-électronique des processus en jeu. Traiter de tels effets précisément requiert une grande puissance de calcul, ce qui a limité les études disponibles aujourd'hui à de petits systèmes. Au cours de cette thèse, j'ai tenté d'expliquer les résultats d'une expérience de type "pompe-sonde" (UVX-IR) sur molécule de Caféine menée par une équipe de collaborateurs à l'Institut lumière matière. J'ai utilisé pour cela une méthode basée sur la théorie de la fonctionnelle de la densité dépendante du temps, la TD-DFTB dont le coût numérique réduit par rapport à cette dernière permet des calculs sur de gros systèmes en temps raisonnable. J'y présente une étude du paysage énergétique de la Caféine ainsi que le résultat de 2 approches distinctes pour simuler l'ionisation de ce composé. La première, l'approximation de l'ionisation soudaine cosiste à retirer "à la main" un électron à l'une des orbitales Kohn-Sham occupées du système neutre et ne tient pas compte du champ laser. La seconde à recours à un potentiel imaginaire (ou CAP - Complex Absorbing Potential) pour simuler la perte d'electrons, et tiens explicitement compte du champ laser / Since the advent of femtochemistry, at the end of 1980's, we are able to probe the nuclear dynamics underlying chemical reactions down to the scale of a femtosecond. More recently, the production of isolated attosecond pulses allows to reach an even bigger temporal resolution. It is now possible to probe the ultrafast electronic dynamics following a photo-excitation. In this context, with the developpement of time-resolved spectroscopy techniques, it is important to have reliable theorectical approaches in order to apprehend the increasing number of results in this field. This task is made difficult by the intrinsic multi-electronic nature processes at play. The precise treatment of such effects requires a considerable computing power, and have thus limited the availables studies to relatively small systems. In this thesis, I tried to explain the outcome of a "pump-probe" (XUV-IR) experiment on Caffeine molecule realized by our collaborators at the Insitut Lumière Matière. To do so, I used a method based on density functional theory, the TD-DFTB, which lower numerical cost with respect to TD-DFT allows calculation on bigger compounds. I present in the document a study of the energetical landscape of Caffeine, and 2 approaches to simulate ionization. The first one, the so called sudden-ionization approximation consist to retrieve "by hand" an electron from the occupied Kohn-Sham orbitals of the neutral system without taking the laser field into account. The other one is based on the introduction of a complex absorbing potential (CAP) to account for electron loss and take explicitely the laser field into account.

Title: Theoretical study of spin-orbit coupling on spectra and photophysics of rhenium complexes Author: RNDr. Radka Heydová Department: Physical and Macromolecular Chemistry Supervisor: Ing. Stanislav Záliš, CSc., JHI AS CR, v.v.i. Supervisor's e-mail address: stanislav.zalis@jh.inst-cas.cz Abstract: Relativistic effects, especially spin-orbit coupling (SOC), play an essential role in transition metal chemistry and SOC treatment is indispensable for a correct theoretical description. To demonstrate the importance of SOC, the energies and oscillator strengths of vertical transitions for a series of [ReX(CO)3(2,2'-bipyridine)] (X = Cl, Br, I) and [Re(imidazole)(CO)3(1,10-phenanthroline)]+ complexes were calculated in the spin-free (SF) and spin-orbit (SO) conceptual frameworks. Two different computational approaches were adopted: SO-MS-CASPT2 where SOC was added a posteriori using a configuration interaction model (SO-RASSI), and the approximate perturbative SO-TD-DFT method. Relativistic effects were included via the two-component Douglas-Kroll-Hess transformation and the zeroth-order regular approximation in the former and the latter technique, respectively. The SF (i.e. accounting only for the scalar relativistic effects) and SO results from both methods were compared with each other and to available...

Organic solar cells (OSCs) based on non-fullerene acceptors (NFAs) have attracted a great deal of attention in recent years due to their rapidly increasing efficiency and enormous potential. In this work, the optical and electronic properties of systems containing the very promising non-fullerene acceptor PYT have been thoroughly studied with the use of the density functional theory (DFT) and the time-dependent density functional theory (TDDFT). By changing the electron linker from thiophene to furan and selenophene, respectively, the PYT was divided into three variants, each of which was studied independently. In addition, these three systems were combined with the donor PBDB-T to generate two distinct interface conformations. The properties studied in this work include the optimized geometries, HOMO-LUMO levels, UV-Vis spectra, frontier molecular orbitals (FMOs), natural transition orbitals (NTOs), density of states (DOS), dipole moments, open-circuit voltages, exciton binding energies, and local exciton (LE) and charge transfer (CT) energies. The calculations were performed in chlorobenzene solution utilizing the polarizable continuum model (PCM). It was discovered that PBDB-T/PY-Se exhibited remarkable flatness employing the π-π stacking conformation which corresponds well with the excellent D/A compatibility observed experimentally. All interfaces displayed appropriate positioning of the HOMO-LUMO levels, with the acceptor dominating the LUMO and the donor dominating the HOMO, with HOMO-LUMO gaps ranging between 1.34 and 1.38 eV. The differences in the interchanging of the electron linker were not that significant, and neither was the change in interface conformation in terms of the HOMO-LUMO levels. This may indicate that the system can be effective even without the presence of a π-π stacking conformation. The first excited states for all interface systems were shown to be pure CT transitions, and on average, 80% of the states exhibit CT character. The remaining contributions consisted of transitions within the pure materials, with a larger contribution within the acceptor. The theoretical results of this study indicate that systems containing the novel polymer acceptor PYT and its variants PY-O and PY-Se exhibit very intriguing properties, and further development of OSCs containing these polymers might further aid in the development of high-performance OSCs. / Organiska solceller (OSC) baserade på icke-fullerenacceptorer (NFA) har väckt stor uppmärksamhet de senaste åren på grund av dess snabbt ökande effektivitet och enorma potential. I detta arbete har de optiska och elektroniska egenskaperna hos system innehållande den mycket lovande icke-fullerenacceptorn PYT studerats grundligt med användning av täthetsfunktionalteorin (DFT) och den tidsberoende täthetsfunktionalteorin (TDDFT). Genom att ändra elektronförbindelsen från tiofen till furan respektive selenofen så delades PYT upp i tre varianter som var och en studerades oberoende av varandra. Dessutom kombinerades dessa tre system med donatorn PBDB-T för att generera två distinkta gränssnittskonformationer. Egenskaperna som studeras i detta arbete inkluderar optimerade geometrier, HOMO-LUMO-nivåer, UV-vis spektra, gränsmolekylära orbitaler (FMO), naturliga övergångsorbitaler (NTO), tillståndstäthet (DOS), dipolmoment, tomgångsspänning, excitonbindningsenergi samt lokal exciton (LE) och laddningsöverförings (CT) energier. Beräkningarna utfördes i klorbensenlösning med användning av den polariserbara kontinuummodellen (PCM). I resultatet uppvisade PBDB-T/PY-Se en anmärkningsvärd planhet med användning av π-π staplingskonformationen som överensstämmer väl med den utmärkta D/A-kompatibiliteten som observerats experimentellt. Alla gränssnitt visade lämplig positionering av HOMO-LUMO-nivåerna, med acceptorn som dominerade LUMO och donatorn som dominerade HOMO, med HOMO-LUMO-gap mellan 1.34 och 1.38 eV. Skillnaderna i utbytet av elektronförbindelsen visade sig inte vara signifikanta och inte heller skillnaden i gränssnittskonformation när det gäller HOMO-LUMO-nivåerna. Detta kan indikera att systemet kan vara effektivt även utan förekomst av π-π staplingskonformation. De första exciterade tillstånden för alla gränssnittssystem visade sig vara rena CT-övergångar och i genomsnitt uppvisade 80% av tillstånden CT-karaktär. Resterande andel bestod av övergångar inom de rena materialen med en större andel inom acceptorn. De teoretiska resultaten av denna studie indikerar att system innehållande den nya polymeracceptorn PYT och dess varianter PY-O och PY-Se uppvisar mycket spännande egenskaper samt att vidareutveckling av OSC:er som innehåller dessa polymerer ytterligare kan hjälpa till i utvecklingen av högpresterande OSC:er.

In this work, the structural, electronic, and optical properties of CdS nanoparticles with sizes up to 4nm have been calculated using density-functional theory (DFT). Inaccuracies in the description of the unoccupied states of the applied density-functional based tight-binding method (DFTB) are overcome by a new SCF-DFTB method. Density-functional-based calculations employing linear-response theory have been performed on cadmium sulfide nanoparticles considering different stoichiometries, underlying crystal structures (zincblende, wurtzite, rocksalt), particle shapes (spherical, cuboctahedral, tetrahedral), and saturations (unsaturated, partly saturated, completely saturated). For saturated particles, the calculated onset excitations are strong excitonic. The quantum-confinement effect in the lowest excitation is visible as the excitation energy decreases towards the bulk band gap with increasing particle size. Dangling bonds at unsaturated surface atoms introduce trapped surface states which lie below the lowest excitations of the completely saturated particles. The molecular orbitals (MOs), that are participating in the excitonic excitations, show the shape of the angular momenta of a hydrogen atom (s, p). Zincblende- and wurtzite-derived particles show very similar spectra, whereas the spectra of rocksalt-derived particles are rather featureless. Particle shapes that confine the orbital wavefunctions strongly (tetrahedron) give rise to less pronounced spectra with lower oscillator strengths. Finally, a very good agreement of the calculated data to experimentally available spectra and excitation energies is found.

In this work, the structural, electronic, and optical properties of CdS nanoparticles with sizes up to 4nm have been calculated using density-functional theory (DFT). Inaccuracies in the description of the unoccupied states of the applied density-functional based tight-binding method (DFTB) are overcome by a new SCF-DFTB method. Density-functional-based calculations employing linear-response theory have been performed on cadmium sulfide nanoparticles considering different stoichiometries, underlying crystal structures (zincblende, wurtzite, rocksalt), particle shapes (spherical, cuboctahedral, tetrahedral), and saturations (unsaturated, partly saturated, completely saturated). For saturated particles, the calculated onset excitations are strong excitonic. The quantum-confinement effect in the lowest excitation is visible as the excitation energy decreases towards the bulk band gap with increasing particle size. Dangling bonds at unsaturated surface atoms introduce trapped surface states which lie below the lowest excitations of the completely saturated particles. The molecular orbitals (MOs), that are participating in the excitonic excitations, show the shape of the angular momenta of a hydrogen atom (s, p). Zincblende- and wurtzite-derived particles show very similar spectra, whereas the spectra of rocksalt-derived particles are rather featureless. Particle shapes that confine the orbital wavefunctions strongly (tetrahedron) give rise to less pronounced spectra with lower oscillator strengths. Finally, a very good agreement of the calculated data to experimentally available spectra and excitation energies is found.