Global ETD Search

1	Project ABSS : Adhesive bonding of stainless steels Andersson, Viktor, Larsson, Andreas January 2017 (has links) This report aims to increase the scientific knowledge about long-term prospects for the adhesive and adhesive joints for bonding of stainless steels. The effects of water, temperature and chemicals on the adhesive and adhesive joints are investigated. Stainless steel plates are pretreated with a primer and isopropanol, there after joined together with single lap modeling. The strength of the joint is tested with a tensile test and additionally a watertightness test is performed to determine if the joints are watertight. For this project three versions of stainless steels is used and two different technologies of two- part adhesives, silicone and silane-modified polymer and one technology of tape, a double coated acrylic foam tape are tested. The result shows that all the adhesives fails cohesively and that tape fails partly adhesively. Result shows that all tests are affected by water, temperature and chemicals on different levels but tape is affected the most with a minimum of 40% loss in shear strength. Watertightness test shows that aged tape joints are not watertight. The polymer shows no signs of decreasing in shear strength and is watertight, but does become more viscous by aging. The report shows that a possible combination of adhesive and pretreatment that can withstand the effects of water, temperature and chemicals is found. The polymer presents a possibility to bond stainless steel with a simple pretreatment. Tape didn’t pass the test in a suitable way but presents opportunities if a sufficient pretreatment can be found. Adhesive Tejp Bonding Stainless steels Accelerated aging Tensile test Watertightness test Engineering and Technology Teknik och teknologier
2	Patienters upplevelser och förväntningar av tejpning som behandlingsmetod vid axelproblematik Sott Kedestad, Andreas, Nilsson, Marcus January 2019 (has links) No description available. Axelbesvär behandling fysioterapi kinesiologitejp icke-elastisk tejp Medical and Health Sciences Medicin och hälsovetenskap
3	Design av mikrovågsövergångar / Design of microwave connections Petersson, Björn January 2003 (has links) <p>In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. </p><p>The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured. </p><p>The main goal of this Master thesis was to design a connection, that would be useful in practice. The connections should be easy to manufacture and have a good performance. They should also have a high tolerance for manufacturing errors. </p><p>The main part of this report contains descriptions of different designs. The designs are presented together with simulated and measured results. </p><p>The report contains designs based upon coplanar waveguides and a phase shifting technique. The result shows that designs that are using coplanar waveguides are good. The phase shifting technique has some limitations and need to be developed further.</p> Electronics Microwave Alumina Transition Connection Coplanar phase shift cavity dubbelhäftande tejp tape adhesive resonance mounting Wilkins splitter stub Agilent transformer TRL X-band Elektronik Mikrovåg Övergång Koplanar fasförskjut stubbe transformator kavitet kortmontering resonans Electronics Elektronik
4	Design av mikrovågsövergångar / Design of microwave connections Petersson, Björn January 2003 (has links) In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured. The main goal of this Master thesis was to design a connection, that would be useful in practice. The connections should be easy to manufacture and have a good performance. They should also have a high tolerance for manufacturing errors. The main part of this report contains descriptions of different designs. The designs are presented together with simulated and measured results. The report contains designs based upon coplanar waveguides and a phase shifting technique. The result shows that designs that are using coplanar waveguides are good. The phase shifting technique has some limitations and need to be developed further. Electronics Microwave Alumina Transition Connection Coplanar phase shift cavity dubbelhäftande tejp tape adhesive resonance mounting Wilkins splitter stub Agilent transformer TRL X-band Elektronik Mikrovåg Övergång Koplanar fasförskjut stubbe transformator kavitet kortmontering resonans Electronics Elektronik

1

Page generated in 0.0335 seconds