This thesis presents the design, modeling, and development of adaptive robot hands that are capable of performing dexterous, in-hand manipulation. The robot hand comprises of anthropomorphic robotic fingers, which employ an adaptive actuation mechanism. The mechanism achieves both flexion/extension and adduction/abduction, on the finger's metacarpophalangeal joint, by using two actuators. Moment arm pulleys are employed to drive the tendon laterally, such that an amplification on the abduction motion occurs, while also maintaining the flexion motion. Particular emphasis has been given to the modeling and the analysis of the actuation mechanism. Also, a model for spatial motion is provided that relates the actuation modes with the finger motion and the tendon force with the finger characteristics. For the hand design, the use of differential mechanisms simplifies the actuation scheme, as we utilize only two actuators for four fingers, achieving affordable dexterity. A design optimization framework assess the results of hand anthropometry studies to derive key parameters for the bio-inspired actuation design. The model assumptions are evaluated with the finite element method. The proposed finger has been fabricated with the Hybrid Deposition Manufacturing technique and the actuation mechanism's efficiency has been validated with experiments that include the computation of the finger workspace, the assessment of the force exertion capabilities, the demonstration of the feasible motions, and the grasping and manipulation capabilities. Also, the hand design is fabricated with off-the-shelf materials and rapid prototyping techniques while its efficiency has been validated using an extensive set of experimental paradigms that involved the execution of grasping and in-hand manipulation tasks with everyday objects. / Master of Science / This thesis presents the design, modeling, and development of adaptive robot hands that are capable of performing selective interdigitation, robust grasping, and dexterous, in-hand manipulation. The robotic fingers employ an adaptive actuation mechanism. The design is minimal and the hand is capable of performing selective interdigitation, robust grasping, and dexterous, in-hand manipulation. Particular emphasis has been given to the modeling and the analysis of the actuation mechanism. For the hand design, the use of differential mechanisms simplifies the actuation scheme, as we utilize only two actuators for four fingers, achieving affordable dexterity. A design optimization framework assess the results of hand anthropometry studies to derive key parameters for the actuation design. The robotic fingers and the anthropomorphic hand were fabricated using off-the-self materials and additive manufacturing techniques. Several experiments were performed to validate the efficacy of the robot hand.

Cable-actuated manipulators (or 'cable robots') constitute a relatively new classification of robots which use motors, located at fixed remote locations, to manipulate an end-effector by extending or retracting cables. These manipulators possess a number of unique properties which make them proficient with tasks involving high payloads, large workspaces, and dangerous or contaminated environments. However, a number of challenges exist which have limited the mainstream emergence of cable robots. This thesis addresses two of the most important of these issues-- workspace analysis and disturbance compensation. Workspace issues are particularly important, as many large-scale applications require the end-effector to operate in regions of a particular shape, and to exert certain minimum forces throughout those regions. The 'Force-Feasible Workspace' represents the set of end-effector positions, for a given robot design, for which the robot can exert a set of required forces on its environment. This can be considered as the robot's 'usable' workspace, and an analysis of this workspace shape for point-mass cable robots is therefore presented to facilitate optimal cable robot design. Numerical simulation results are also presented to validate the analytical results, and to aid visualization of certain complex workspace shapes. Some cable robot applications may require mounting motors to moving bases (i.e. mobile robots) or other surfaces which are subject to disturbances (i.e. helicopters or crane arms). Such disturbances can propagate to the end-effector and cause undesired motion, so the rejection of motor mount disturbances is also of interest. This thesis presents a strategy for measuring these disturbances and compensating for them. General approaches and implementation issues are explored qualitatively with a simple one-degree-of-freedom prototype (including a strategy for mitigating accelerometer drift), and quantitative simulation results are presented as a proof of concept.