Spelling suggestions: "subject:"4he static"" "subject:"ehe static""
71 |
Synchrophasors' Application in SVC for Industrial NetworksSuhwail, Kareem M. 19 December 2012 (has links)
No description available.
|
72 |
THE EFFECTS OF STATIC AND DYNAMIC STRETCHING ON COMPETITIVE GYMNASTS’ SPLIT JUMP PERFORMANCEHarper, Erin N. 10 August 2011 (has links)
No description available.
|
73 |
Static and Dynamic Characterization of Ionic Polymer Metal Composites - 'Artificial Muscles'Mudigonda, Ashwin 18 April 2006 (has links)
No description available.
|
74 |
Compile-Time Characterization of Recurrent Patterns in Irregular ComputationsSingri, Arjun Jagadeesh 03 September 2010 (has links)
No description available.
|
75 |
A Cost Effective Methodology for Quantitative Evaluation of Software Reliability using Static AnalysisSchilling, Walter William, Jr. January 2007 (has links)
No description available.
|
76 |
A CFD/CSD Interaction Methodology for Aircraft WingsBhardwaj, Manoj K. 15 October 1997 (has links)
With advanced subsonic transports and military aircraft operating in the transonic regime, it is becoming important to determine the effects of the coupling between aerodynamic loads and elastic forces. Since aeroelastic effects can contribute significantly to the design of these aircraft, there is a strong need in the aerospace industry to predict these aero-structure interactions computationally.
To perform static aeroelastic analysis in the transonic regime, high fidelity computational fluid dynamics (CFD) analysis tools must be used in conjunction with high fidelity computational structural dynamics (CSD)analysis tools due to the nonlinear behavior of the aerodynamics in the transonic regime. There is also a need to be able to use a wide variety of CFD and CSD tools to predict these aeroelastic effects in the transonic regime. Because source codes are not always available, it is necessary to couple the CFD and CSD codes without alteration of the source codes. In this study, an aeroelastic coupling procedure is developed which will perform static aeroelastic analysis using any CFD and CSD code with little code integration. The aeroelastic coupling procedure is demonstrated on an F/A-18 Stabilator using NASTD (an in-house McDonnell Douglas CFD code)and NASTRAN. In addition, the Aeroelastic Research Wing (ARW-2) is used for demonstration of the aeroelastic coupling procedure by using ENSAERO (NASA Ames Research Center CFD code) and a finite element wing-box code (developed as a part of this research). The results obtained from the present study are compared with those available from an experimental study conducted at NASA Langley Research Center and a study conducted at NASA Ames Research Center using ENSAERO and modal superposition. The results compare well with experimental data.
In addition, parallel computing power is used to investigate parallel static aeroelastic analysis because obtaining an aeroelastic solution using CFD/CSD methods is computationally intensive. A parallel finite element wing-box code is developed and coupled with an existing parallel Euler code to perform static aeroelastic analysis. A typical wing-body configuration is used to investigate the applicability of parallel computing to this analysis. Performance of the parallel aeroelastic analysis is shown to be poor; however with advances being made in the arena of parallel computing, there is definitely a need to continue research in this area. / Ph. D.
|
77 |
Static Analysis to improve RTL VerificationAgrawal, Akash 06 March 2017 (has links)
Integrated circuits have traveled a long way from being a general purpose microprocessor to an application specific circuit. It has become an integral part of the modern era of technology that we live in. As the applications and their complexities are increasing rapidly every day, so are the sizes of these circuits. With the increase in the design size, the associated testing effort to verify these designs is also increased. The goal of this thesis is to leverage some of the static analysis techniques to reduce the effort of testing and verification at the register transfer level. Studying a design at register transfer level gives exposure to the relational information for the design which is inaccessible at the structural level.
In this thesis, we present a way to generate a Data Dependency Graph and a Control Flow Graph out of a register transfer level description of a circuit description. Next, the generated graphs are used to perform relation mining to improve the test generation process in terms of speed, branch coverage and number of test vectors generated. The generated control flow graph gives valuable information about the flow of information through the circuit design. We are using this information to create a framework to improve the branch reachability analysis mainly in terms of the speed. We show the efficiency of our methods by running them through a suite of ITC'99 benchmark circuits. / Master of Science
|
78 |
Trajectory Tracking of a Statically-stable Biped with Two Degrees of FreedomTrout, Joseph Ewell 22 December 2003 (has links)
This research investigates the possibility of controlling a simple biped having two degrees of freedom only. The biped robot walked on large feet. Having large feet enabled the robot to stand on one leg stably. At any time, the robotà Âs center of gravity remained above the area covered by one of the feet. Two servos actuated the two degrees of freedom tilting the robot to the side or moving the legs forward and backward. The biped moved by alternately tilting and striding. Turns were produced by dragging the feet along the ground. As the feet dragged, the friction generated under the feet created a turning moment that rotated the robot. Thus, the robot was able to step and turn on a flat surface. A control algorithm was developed to attempt trajectory tracking with the biped. Trajectories along a surface can be defined in terms of linear and angular velocities. In this research, it was assumed that a high level controller had transformed a desired trajectory into discrete steps of linear and angular velocities. Motion tests showed how various settings of the servos affected the step length and turning angle of the robot. To produce the desired velocities, a program was created to select the servo commands and set the speed parameters. This program applied knowledge of the expected step length and turning angle and performed feedforward control of the velocities. This investigation identified a trajectory tracking scheme that could be used in an observer feedback scenario to achieve accurate control. / Master of Science
|
79 |
Four-Craft Virtual Coulomb Structure Analysis for 1 to 3 dimensional GeometriesVasavada, Harsh Amit 25 April 2007 (has links)
Coulomb propulsion has been proposed for spacecraft cluster applications with separation distances on the order of dozens of meters. This thesis presents an investigation of analytic charge solutions for a planar and three dimensional four satellite formations. The solutions are formulated in terms of the formation geometry. In contrast to the two and three spacecraft Coulomb formations, a four spacecraft formation has additional constraints that need to be satisfied for the individual charges on the spacecraft to be unique and real. A spacecraft must not only satisfy the previously developed inequality constraints to yield a real charge solution, but it must also satisfy three additional equality constraints to ensure the spacecraft charge is unique. Further, a method is presented to reduce the number of equality constraints arising due the dynamics of a four spacecraft formation. Formation geometries are explored to determine the feasibility of orienting a square formation arbitrarily in any given plane. The unique and real spacecraft charges are determined as functions of the orientation of the square formation in a given principal orbit plane. For a three-dimensional tetrahedron formation, the charge products obtained are a unique set of solution. The full three-dimensional rotation of a tetrahedron is reduced to a two angle rotation for simpler analysis. The number of equality constraints for unique spacecraft charges can not be reduced for a three-dimensional formation. The two angle rotation results are presented for different values of the third angle. The thesis also presents the set up for a co-linear four-craft problem. The solution for the co-linear formation is not developed. The discussion of co-linear formations serves as an open question on how to determine analytic solutions for system with null-space dimension greater than 1. The thesis also presents a numerical tool for determining potential shapes of a static Coulomb formation as a support to the analytical solutions. The numerical strategy presented here uses a distributed Genetic Algorithm (GA) as an optimization tool. The GA offers several advantages over traditional gradient based optimization methods. Distributing the work of the GA over several processors reduces the computation time to arrive at a solution. The thesis discusses the implementation of a distributed GA used in the analysis of a static Coulomb formation. The thesis also addresses the challenges of implementation of a distributed GA on a computing cluster and presents candidate solutions. / Master of Science
|
80 |
A Study of Dynamic + Static SpaceBirdi, Bhavneet Kaur 05 July 2011 (has links)
Architecture and dance are both able to communicate through a language of rhythm and choreography. The fluidity and balance of a dancer as an artistic endeavor can be an inspiration, to develop analogous architectural forms as a kind of transcribed motions of the dance.
A dancer''s movements and pauses can be interpreted as dynamic and static architectural moments. Dynamic space suggests to be active, and continuous, while static aims to be passive, tranquil and defined.
A proposal for an Art Center consisting of theater and a studio space serves as a vehicle to explore formally the spatial components inspired by dance. In the proposal, the theater embodies the active expression of motion. This provides a dynamic architectural space through two concentric curved enclosures that expand and contract horizontally and vertically. In contrast, the studios form a static shell, promoting a serene environment where the architecture frames the dancer''s activity.
The duality of dynamic and static architectural space in the work is a primary framework. The dynamic expresses the kinetic nature of architectural elements in space; in contrast, the static reveals the potential of a precisely measured room to achieve a balanced harmony when juxtaposed together. / Master of Architecture
|
Page generated in 0.048 seconds