Thesis (MScEng)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: High temperature heat sources are becoming an ever-increasing imperative in the process industry for the production of plastics, ammonia and fertilisers, hydrogen, coal-toliquid fuel and process heat. Currently, high temperature reactor (HTR) technology is capable of producing helium temperatures in excess of 950°C; however, at these temperatures, tritium, which is a radioactive contaminant found in the helium coolant stream, is able to diffuse though the steel retaining wall of the helium-to-steam heat exchanger. To circumvent this radioactivity problem, regulations require an intermediate heat exchange loop between the helium and the process heat streams. In this paper, the use of a uniquely designed sodium-charged heat pipe heat exchanger is considered, and has the distinct advantage of having almost zero exergy loss as it eliminates the intermediate heat exchange circuit. In order to investigate this novel heat pipe heat exchanger concept, a special intermediate-temperature (± 240°C) experimental heat pipe heat exchanger (HPHE) was designed. This experimental HPHE uses Dowtherm A as working fluid and has two glass windows to enable visual observation of the boiling and condensation two-phase flow processes. A high temperature air-burner supply simulates the high temperature stream, and the cold stream is provided by water from a constant-heat supply tank. This experimental apparatus can be used to evaluate the validity of steady-state and start-up transient theoretical models that have been developed. This paper will highlight the special design aspects of this HPHE, the theoretical model and the solution algorithm described. Experimental results will be compared with the theoretically calculated results. The theoretical model will then be used to predict the performance of a high temperature (sodium working fluid at 850°C) HPHE will be undertaken and conclusions and recommendation made. / AFRIKAANSE OPSOMMING: Hoë temperatuur hitte bronne is besig om ‘n toenemende noodsaaklikheid te raak in die proses industrie vir die vervaardiging van plastieke, ammoniak, kunsmis, waterstof, steenkool-tot-vloeibare brandstof en proses hitte. Huidige hoë temperatuur reaktor tegnologie is in staat om helium te verhit tot temperature hoër as 950°C, maar by sulke hoë temperature is die vorming van tritium, wat ‘n radioaktiewe produk is, in die helium verkoeling stroom wat deur die reaktor vloei, ‘n probleem. Die tritium is in staat om deur die staal wand van ‘n enkel fase warmte uitruiler te diffundeer. Om hierdie radioaktiewe probleem te uitoorlê, stel huidige regulasies voor dat ‘n oorgangs hitte uitruil lus gebruik raak tussen die helium en proses strome van die reaktor stelsel. In hierdie tesis word ‘n unieke natrium gevulde hitte pyp warmte uitruiler nagevors, hierdie ontwerp het die voordeel dat dit geen “exergy” verlies het omdat dit nie ‘n oorgangs hitte uitruil lus benodig nie. Hierdie unieke konsep was nagevors deur ‘n spesiale oorgangs temperatuur (± 230°C) eksperimentiële hitte pyp warmte uitruiler te ontwerp. Hierdie eksperimentiële hitte pyp warmte uitruiler gebruik Dowtherm A as oordrags medium tussen die warm en koue strome en het twee glas venters waardeur die kook en kondensasie van die oorgangs medium dop gehou kan word. ‘n Hoë temperatuur verbrander simuleer die warm stroom deur die reaktor en die koue stroom word gesimuleer deur koue water. Die eksperimentiële opstelling sal gebruik word om die tyd afhangklike en tyd onafhangklike teoretiese wiskundige modele te valideer. Hierdie tesis sal die spesiale ontwerp aspekte van die hitte pyp warmte uitruiler, teoretiese modelle en oplos algoritme te bespreek. Eksperimentiele resultate sal met die teoretiese resultate vergelyk word en dan sal die teoretiese modelle gebruik word om ‘n natrium gevulde warmte uitruiler te simuleer. Gevolgtrekkings en aanbevelings sal in die lig van die resultate verskaf word.

Thesis (MEng)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: Solar Assisted Power Generation (SAPG) can be seen as a synergy of solar and fossil plants – combining the environmental benefits of the former and the scale, efficiency and reliability of the latter. SAPG offers great potential for cost effective utilization of solar energy on utility scale and could accelerate the adoption of solar thermal energy technologies in the short and medium term, especially in countries with a significant coal base and a good solar resource such as Australia, China, United States, India and South Africa. SAPG is the replacement of bled-off steam in a Regenerative Rankine power cycle. Power plant simulations were performed using weather data for Lephalale, South Africa (Matimba power station). With an increase in the solar field outlet temperature, an increase in overall solar to electric efficiency was observed, superior to a stand-alone Solar Thermal Power Plant(s) (STPP) at similar temperatures. The performance of four solar collector technologies was compared: flat plate, evacuated tube, Linear Fresnel (LF) and Parabolic Trough (PT). This comparison was limited to the normal incidence angles of irradiation. For this application, nonconcentrating technologies are not competitive. For non-normal incidence angles, annual simulations were limited to PT and LF at final feedwater heater temperatures. The actual aperture area of around 80 000 m2 was used (50 MW thermal based on LF). On an equal aperture area basis, PT outperforms LF significantly. For the conventional North-South arrangement, LF needs to be around 53% of the specific installation cost (in $/m2 aperture area) of PT to be cost competitive. A SAPG plant at Lephalale was compared to a stand-alone Solar Thermal Power Plant STPP in a good solar resource area, namely Upington, South Africa – Parabolic Trough solar collector fields of equal size were considered for both configurations. It was found that the annual electricity generated with a SAPG plant is more than 25% greater than a stand-alone STPP. If the cost of SAPG is taken as 72% of the cost of a stand-alone STPP, this translates into SAPG being 1.8 times more cost effective than stand-alone STPP. Furthermore, SAPG performs better in high electricity demand months (South African winter – May to August). Stand-alone STPP have been adopted in South Africa and are currently being built. This was achieved by the government creating an attractive environment for Independent Power Producers (IPP). Eskom, the national power supplier, is currently investigating solar boosting at existing Eskom sites. This report argues that on a national level, SAPG, specifically solar preheating of feedwater, is a more viable solution for South Africa, with both its significant coal base and good solar resource. / AFRIKAANSE OPSOMMING: Son ondersteunde krag generasie (SOKG) kan gesien word as sinergie van sonkrag en fossiele brandstof aanlegte – dit voeg die omgewings voordele van die eersgenoemde en die grote, effektiwiteit en betroubaarheid van die laasgenoemde by mekaar. SOKG opper groot potensiaal vir koste effektiewe gebruik van son energie op nutsmaatskappyskaal en kan die aanvaarding van sontermiese energietegnologieë in die kort en medium termyn versnel, veral in lande met beduidende kool reserwes en goeie sonkrag voorkoms soos Australië, China, Verenigde State van Amerika, Indië en Suid-Afrika. SOKG impliseer die vervanging van aftap stoom in die regeneratiewe Rankine krag kringloop. Kragstasie simulasies was gedoen met die gebruik van weer data van Lephalale, Suid-Afrika (Matimba kragstasie). Met die toename van die sonveld uitlaat temperatuur kon oorhoofse son-na-elektrisiteit effektiwiteit vasgestel word, wat hoër is as die van alleenstaande sontermiese krag stasie (STKS) by soortgelyke temperature. Die effektiwiteit van vier son kollekteerder tegnologieë was vergelyk: plat plaat, vakuum buis, lineêre Fresnel (LF) en paraboliese trog (PT). Die vergelyking was beperk tot normale inval van bestraling. Vir hierdie toepassing is nie-konsentreerende tegnologie nie mededingend nie. Vir nie-normale inval hoeke was jaarlange simulasies beperk tot PT en LF by finale voedingswater temperatuur. Die werklike opening area van omtrent 80 000 m2 was gebruik (50 MW termies gebaseer op LF). By gelyke opening area, uitpresteer PT LF beduidend. Vir die gebruiklike Noord-Suid rankskikking benodig LF omtrent 53% van die spesifieke installasie kostes (in $/m2 opening area) van PT om kostes mededingend te kan wees. ‘n SOKG aanleg by Lephalale was vergelyk met alleenstaande STKS in die goeie son voorkoms gebied van Upington, Suid-Afrika – Paraboliese trog kollekteerder velde van gelyke grote was oorweeg vir al twee konfigurasies. Dit was gevind dat die jaarlikse elektrisiteit gegenereer vanaf SOKG meer as 25% is as die van alleenstaande STKS. Indien SOKG oorweeg word met 72% van die kostes van alleenstaande STKS, dan beteken dit dat SOKG 1.8 keer meer koste effektief is as alleenstade STKS. Verder, SOKG presteer beter in die hoer elektrisiteitsnavraag maande (Suid- Afrikaanse winter – May tot Augustus). Alleenstaande STKS is gekies vir Suid-Afrika en word tans gebou. Dit is bereik deur dat die regering ‘n aantreklike omgewing geskep het vir onafhanglike krag produsente. Eskom ondersoek tans SOKG by bestaande Eskom persele. Hierdie verslag beweer dat op nasionale/Eskom vlak, SOKG, besonders son voorverhitting van voedingswater, meer haalbare oplossing is vir Suid-Afrika met sy beduidende koolreserwes en goeie son voorkoms.

Thesis (MScEng)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: In this study we consider the lack of rotational invariance of three different population based optimization methods, namely the particle swarm optimization (PSO) algorithm, the differential evolution (DE) algorithm and the continuous-parameter genetic algorithm (CPGA). We then propose rotationally invariant versions of these algorithms. We start with the PSO. The so-called classical PSO algorithmis known to be variant under rotation, whereas the linear PSO is rotationally invariant. This invariance however, comes at the cost of lack of diversity, which renders the linear PSO inferior to the classical PSO. The previously proposed so-called diverse rotationally invariant (DRI) PSO is an algorithm that aims to combine both diversity and invariance. This algorithm is rotationally invariant in a stochastic sense only. What is more, the formulation depends on the introduction of a random rotation matrix S, but invariance is only guaranteed for ‘small’ rotations in S. Herein, we propose a formulation which is diverse and strictly invariant under rotation, if still in a stochastic sense only. To do so, we depart with the linear PSO, and then we add a self-scaling random vector with a standard normal distribution, sampled uniformly from the surface of a n-dimensional unit sphere. For the DE algorithm, we show that the classic DE/rand/1/bin algorithm, which uses constant mutation and standard crossover, is rotationally variant. We then study a previously proposed rotationally invariant DE formulation in which the crossover operation takes place in an orthogonal base constructed using Gramm-Schmidt orthogonalization. We propose two new formulations by firstly considering a very simple rotationally invariant formulation using constant mutation and whole arithmetic crossover. This rudimentary formulation performs badly, due to lack of diversity. We then introduce diversity into the formulation using two distinctly different strategies. The first adjusts the crossover step by perturbing the direction of the linear combination between the target vector and the mutant vector. This formulation is invariant in a stochastic sense only. We add a self-scaling random vector to the unaltered whole arithmetic crossover vector. This formulation is strictly invariant, if still in a stochastic sense only. In this study we consider the lack of rotational invariance of three different population based optimization methods, namely the particle swarm optimization (PSO) algorithm, the differential evolution (DE) algorithm and the continuous-parameter genetic algorithm (CPGA). We then propose rotationally invariant versions of these algorithms. We start with the PSO. The so-called classical PSO algorithmis known to be variant under rotation, whereas the linear PSO is rotationally invariant. This invariance however, comes at the cost of lack of diversity, which renders the linear PSO inferior to the classical PSO. The previously proposed so-called diverse rotationally invariant (DRI) PSO is an algorithm that aims to combine both diversity and invariance. This algorithm is rotationally invariant in a stochastic sense only. What is more, the formulation depends on the introduction of a random rotation matrix S, but invariance is only guaranteed for ‘small’ rotations in S. Herein, we propose a formulation which is diverse and strictly invariant under rotation, if still in a stochastic sense only. To do so, we depart with the linear PSO, and then we add a self-scaling random vector with a standard normal distribution, sampled uniformly from the surface of a n-dimensional unit sphere. For the DE algorithm, we show that the classic DE/rand/1/bin algorithm, which uses constant mutation and standard crossover, is rotationally variant. We then study a previously proposed rotationally invariant DE formulation in which the crossover operation takes place in an orthogonal base constructed using Gramm-Schmidt orthogonalization. We propose two new formulations by firstly considering a very simple rotationally invariant formulation using constant mutation and whole arithmetic crossover. This rudimentary formulation performs badly, due to lack of diversity. We then introduce diversity into the formulation using two distinctly different strategies. The first adjusts the crossover step by perturbing the direction of the linear combination between the target vector and the mutant vector. This formulation is invariant in a stochastic sense only. We add a self-scaling random vector to the unaltered whole arithmetic crossover vector. This formulation is strictly invariant, if still in a stochastic sense only. For the CPGA we show that a standard CPGA using blend crossover and standard mutation, is rotationally variant. To construct a rotationally invariant CPGA it is possible to modify the crossover operation to be rotationally invariant. This however, again results in loss of diversity. We introduce diversity in two ways: firstly using a modified mutation scheme, and secondly, following the same approach as in the PSO and the DE, by adding a self-scaling random vector to the offspring vector. This formulation is strictly invariant, albeit still in a stochastic sense only. Numerical results are presented for the variant and invariant versions of the respective algorithms. The intention of this study is not the contribution of yet another competitive and/or superior population based algorithm, but rather to present formulations that are both diverse and invariant, in the hope that this will stimulate additional future contributions, since rotational invariance in general is a desirable, salient feature for an optimization algorithm. / AFRIKAANSE OPSOMMING: In hierdie studie bestudeer ons die gebrek aan rotasionele invariansie van drie verskillende populasiegebaseerde optimeringsmetodes, met name die partikel-swerm optimerings (PSO) algoritme, die differensi¨ele evolusie (DE) algoritme en die kontinue-parameter genetiese algoritme (KPGA). Ons stel dan rotasionele invariante weergawes van hierdie algoritmes voor. Ons beginmet die PSO. Die sogenaamde klassieke PSO algoritme is bekend dat dit variant is onder rotasie, terwyl die lineˆere PSO rotasioneel invariant is. Hierdie invariansie lei tot ’n gebrek aan diversiteit in die algoritme, wat beteken dat die lineˆere PSO minder goed presteer as die klassieke PSO. Die voorheen voorgestelde sogenaamde diverse rotasionele invariante (DRI) PSO is ’n algoritme wat beoog om beide diversiteit en invariansie te kombineer. Hierdie algoritme is slegs rotasioneel invariant in ’n stogastiese sin. Boonop is die formulering afhanklik van ’n willekeurige rotasie matriks S, maar invariansie is net gewaarborg vir ’klein’ rotasies in S. In hierdie studie stel ons ’n formulering voor wat divers is en streng invariant onder rotasie, selfs al is dit steeds net in ’n stogastiese sin. In hierdie formulering, vertrek ons met die lineˆere PSO, en voeg dan ’n self-skalerende ewekansige vektor met ’n standaard normaalverdeling by, wat eenvormig van die oppervlakte van ’n n-dimensionele eenheid sfeer geneem word. Vir die DE algoritme toon ons aan dat die klassieke DE/rand/1/bin algoritme, wat gebruik maak van konstante mutasie en standaard kruising rotasioneel variant is. Ons bestudeer dan ’n voorheen voorgestelde rotasionele invarianteDE formulering waarin die kruisingsoperasie plaasvind in ’n ortogonale basis wat gekonstrueer wordmet behulp van die Gramm-Schmidt ortogonalieseringsproses. Verder stel ons dan twee nuwe formulerings voor deur eerstens ’n baie eenvoudige rotasionele invariante formulering te oorweeg, wat konstante mutasie en volledige rekenkundige kruising gebruik. Hierdie elementˆere formulering onderpresteer as gevolg van die afwesigheid van diversiteit. Ons voeg dan diversiteit by die formulering toe, deur gebruik te maak van twee afsonderlike strategie ¨e. Die eerste verander die kruisings stap deur die rigting van die lineˆere kombinasie tussen die teiken vektor en die mutasie vektor te perturbeer. Hierdie formulering is slegs invariant in ’n stogastiese sin. In die ander formulering, soos met die nuwe rotasionele invariante PSO, voeg ons bloot ’n self-skalerende ewekansige vektor by die onveranderde volledige rekenkundige kruisingsvektor. Hierdie formulering is streng invariant onder rotasie, selfs al is dit steeds net in ’n stogastiese sin. Vir die KPGA wys ons dat die standaard KPGA wat gemengde kruising en standaard mutasies gebruik, rotasioneel variant is. Om ’n rotasionele invariante KPGA te konstrueer is dit moontlik om die kruisingsoperasie aan te pas. Dit veroorsaak weereens ’n verlies aan diversiteit. Ons maak die algoritmes divers op twee verskillende maniere: eerstens deur gebruik te maak van ’n gewysigde mutasie skema, en tweedens deur die selfde aanslag te gebruik as in die PSO en die DE, deur ’n self-skalerende ewekansige vektor by die nageslag vektor te voeg. Hierdie formulering is streng invariant onder rotasie, selfs al is dit steeds net in ’n stogastiese sin. Numeriese resultate word vir die variante en invariante weergawe van die onderskeie algoritmes verskaf. Die doel van hierdie studie is nie die bydrae van bloot nog ’n kompeterend en/of beter populasiegebaseerde optimeringsmetode nie, maar eerder om formulerings voor te lê wat beide divers en invariant is, met die hoop dat dit in die toekoms bykomende bydraes sal stimuleer, omdat rotasionele invariansie in die algemeen ’n aantreklike, belangrike kenmerk is vir ’n optimerings algoritme.

Thesis (MScEng) -- Stellenbosch University, 2014. / ENGLISH ABSTRACT: South Africa has a signi cant potential resource for electrical power generation in the Agulhas Current on the southeast coast. The Ocean Current Energy Convertor studied in this project was designed to generate power from this current. The feasibility of this device was investigated by analysing the dynamic stability and controllability of the convertor, when acted upon by hydrodynamic forces while harvesting energy from the current. A simulation model was developed to predict the dynamic behaviour using the Simulink software suite. A scale model of the prototype was built and tested in the Towing Tank at Stellenbosch University, and the experimental results were compared against the simulation results. A control algorithm was designed, using the mathematical model, to control the roll angle and deployment depth. The control algorithm was tested in simulation. The results indicated that the simulation model accurately predicted the behaviour of the prototype in testing, and results showed that the device is both stable and controllable. It was concluded that this OCEC design concept warrants further investigation. The recommendations are that the experimental model be improved to ensure reliable experimental results, that further complexity be added to the simulation model, and that the control algorithm be tested on the improved prototype in the towing tank. / AFRIKAANSE OPSOMMING: Die Agulhas-seestroom aan die suidooskus van Suid-Afrika bied 'n aansienlike potensiële hulpbron vir elektriese kragopwekking. Die seestroomenergieomsetter (SEO) wat in hierdie projek bestudeer is was ontwikkel om krag uit hierdie seestroom te genereer. Die doenlikheid van hierdie toestel is ondersoek deur die dinamiese stabiliteit en beheerbaarheid van die omsetter onder die invloed van hidrodinamiese kragte te analiseer terwyl dit energie van die stroom inwin. 'n Simulasiemodel is met behulp van Simulink-sagteware ontwikkel om die dinamiese gedrag te voorspel. 'n Skaalmodel van die prototipe was gebou en in die sleeptenk by Universiteit Stellenbosch getoets en die eksperimentele resultate met die simulasie se resultate vergelyk. 'n Beheer-algoritme is daarna ontwerp, deur middel van die wiskundige model, om die rolhoek en diepte van ontplooiing te beheer.Hierdie algoritme is tydens simulasie getoets. Die resultate het aangedui dat die simulasiemodel akkuraat die gedrag van die prototipe tydens toetse voorspel het, en die resultate het gewys dat die toestel beide stabiel en beheerbaar is. Die gevolgtrekking is gemaak dat die SEO se ontwerpkonsep verdere studie regverdig. Die aanbevelings is dat die eksperimentele model verbeter word om betroubare eksperimentele resultate te verseker, dat verdere kompleksiteit by die simulasiemodel gevoeg word, en dat die beheer-algoritme op die verbeterde model in die sleeptenk getoets word.

Thesis (PhD)--Stellenbosch University, 2011. / ENGLISH ABSTRACT: Axial flow fan arrays form part of air-cooled steam condensers in direct drycooled power plants. This dissertation investigates the performance of axial flow fans when located at the perimeter of a fan array. The perimeter (or edge) fans may experience a reduction in air flow through the fan due to the prevalence of distorted inlet conditions upstream of the fan. The reduction in air flow leads to a reduction in the heat transfer capability of the steam condenser and a consequent reduction in the electricity output of the power plant. Due to the physical size of an air-cooled condenser, full-scale experiments are often impractical and computational fluid dynamics (CFD) is used to model its performance under various conditions. To limit the size of the CFD model the axial flow fans in the CFD analysis are represented by means of simplified methods. Three different simplified methods are presented and applied to a CFD model of a single axial flow fan, namely the pressure jump method (PJM), actuator disc method (ADM) and extended actuator disc method (EADM). The results are compared to experimental values. The comparison highlights the limitations of the models: The ADM fails to model fan performance correctly at low flow rates, while the PJM ignores the variation in fan blade properties at different locations within the fan rotor. The EADM is presented as an improvement on both the other two models. A multiple fan test facility is constructed, consisting of three 630 mm diameter fans extracting air from a common inlet chamber. The inlet chamber is constructed in such a way that one of the three fans act as the perimeter (edge) fan. The floor of the inlet chamber can be adjusted to increase or reduce the inlet flow distortion experienced by the edge fan. Six different fan configurations are tested in the position of the edge fan and an empirical method is derived by which the volumetric effectiveness of an edge fan can be predicted. The experimental results are compared to CFD results for the same facility using the three different simplified simulation methods investigated previously. Particle image velocimetry (PIV) measurements are also performed upstream of the edge fan and the velocity profiles at the inlet of the fan are compared to the profiles obtained numerically. The comparisons show that the EADM predicts the performance of the edge fan more accurately than the ADM en PJM. The effect of adding a walkway and removing the bell mouth upstream of the edge fan was investigated using the EADM. The results are used to show the location of the loss mechanisms upstream of the edge fan. The addition of a walkway moves the location of the pressure loss away from the edge fan bell mouth towards the edge of the walkway. Consequently the distortion directly upstream of the edge fan is reduced and its volumetric effectiveness increased. The effect of removing the edge fan’s bell mouth is similar to the effect of adding a walkway upstream of the edge fan. / AFRIKAANSE OPSOMMING: Aksiaalwaaiermatrikse vorm deel van lugverkoelde kondensors in direk droëverkoelde kragstasies. Hierdie verhandeling ondersoek die werkverrigting van aksiaalwaaiers wat geleë is op die rand van ‘n groot waaiermatriks. Die randwaaiers kan ’n vermindering in deurvloei ondervind as gevolg van versteurde inlaattoestande stroom-op vanaf die waaier. Die vermindering in lugvloei lei tot ’n vermindering in die warmetoordagvermoë van die stoomkondensor en ’n gepaardgaande afname in die elektrisiteitslewering van die kragstasie. As gevolg van die fisiese grootte van die lugverkoelde kondensor is volskaalse eksperimente gewoonlik onprakties en word berekeningsvloeimeganika (BVM) gebruik om die werking van die aanleg onder verskeie toestande te modelleer. Ten einde die grootte van die BVM model te beperk, word die aksiaalwaaiers in so ‘n BVM analiese voorgestel met behulp van vereenvoudigde metodes. Drie verskillende vereenvoudigde metodes word aangebied en toegepas op ‘n BVM model van ‘n enkelwaaier, naamlik die druksprongmetode, die aksieskyfmetode en die verlengde aksieskyfmetode. Die resultate word vergelyk met eksperimentele waardes. Die vergelyking benadruk die beperkings van die modelle: Die aksieskyfmetode kan nie die werking van die waaier akkuraat voorspel by lae vloeie nie en die druksprongmetode ignoreer die variasie in lemeienskappe op verskillende liggings binne-in die waaierrotor. Die verlengde aksieskyfmetode word voorgestel as ‘n verbetering op die ander twee metodes. ‘n Veelvuldige waaiertoetsfasiliteit is saamgestel, bestaande uit drie 630 mm deursnee waaiers wat lug uit ’n gemeenskaplike inlaatkamer suig. Die inlaatkamer is so saamgestel dat een van die waaiers in die fasiliteit ‘n randwaaier verteenwoordig. Die vloerhoogte van die inlaatkamer kan aangepas word om die inlaatversteuring wat deur die raandwaaier ondervind word te vermeerder of te verminder. Ses verskillende waaierkonfigurasies is getoets in die randwaaierposisie. ‘n Empiriese metode waarmee die volumetriese effektiwiteit van ‘n randwaaier voorspel kan word is afgelei. Die eksperimentele resultate word vergelyk met ooreenstemmende BVM resultate vir dieselfde fasiliteit deur gebruik te maak van die drie verskillende vereenvoudigde metodes wat vroeër ondersoek is. Partikelbeeld snelheidsmetings word ook stroom-op vanaf die randwaaier uitgevoer en die snelheidsprofiele by die inlaat van die waaier word vergelyk met profiele wat numeries bereken word. Die vergelykings wys dat die verlengde aksieskyfmetode die werkverrigting van ’n aksiaalwaaier meer akkuraat voorspel as die aksieskyf- of druksprongmetodes. Die effek van die installering van ‘n loopvlak en die verwydering van die randwaaier se inlaatmondstuk word ondersoek met behulp van BVM deur gebruik te maak van die verlengde aksieskyfmetode. Die resultate word spesifiek gebruik om die ligging van die verliesmeganismes stroom-op vanaf die randwaaier aan te dui. Die resultate wys dat die installering van ‘n loopvlak die ligging van die drukverlies wegneem vanaf die rand van die waaierinlaat na die rand van die loopvlak. Dit verminder die inlaatversteuring stroom-op vanaf die randwaaier en die volumetriese effektiwiteit word verhoog. Die verwydering van die randwaaier se inlaatmondstuk het ‘n soortgelyke effek as die installering van ‘n loopvlak stroom-op vanaf die randwaaier.

Thesis (PhD)--Stellenbosch University, 2012. / ENGLISH ABSTRACT: Second-generation bioethanol is an alternative transportation fuel currently being investigated whereby cellulose, specifically lignocellulosic (woody) portions, of any plant mass can be converted to ethanol. To date, the technology had only been successfully implemented with demonstration scale facilities. Despite intensive research efforts at laboratory scale, no-one is certain what the secondary effects of scale-up to large systems are. The objective of this project was to develop threedimensional numerical models of a laboratory scale fermenter which could predict the effects of particulate mixing and reaction kinetics for future scale-up investigations. A numerical model of the reaction kinetics for simultaneous saccharification and fermentation of Avicel (microcrystalline cellulose) particles to ethanol is presented. The novelty of this model is the separation of the two primary cellulase enzyme-kinetics, which generated the capability to predict the heterogeneous behaviour of the enzyme-substrate interactions. This model improves the understanding of these systems while maintaining sufficient simplicity for implementation alongside a commercial computational fluid dynamics environment. Effects of the various fermentation medium constituents and the influence of each on the dynamic viscosity of the medium were also investigated. Results indicated that particle volume fraction had the dominant effect on the apparent dynamic viscosity resulting in further research of the particle properties. Due to the irregular shapes of Avicel particles, tests were conducted to determine drag and settling behaviour, which led to the development and modification of models to account for these phenomena. This investigation is unique as it allows a more accurate calculation of particle transportation through a three-dimensional environment including the effects of natural packing density. At lower particle volume fraction the concentration of ethanol and glycerol had the greatest effect on the apparent dynamic viscosity and was calculated from models obtained from literature. Validation of the physics and the incorporation thereof in the simulations resulted in the modification of various generic models which either improved numerical stability or accuracy, or both. Contributions included a modified form of the pressure force model, which proved significantly more stable and accurate than previous models proposed in literature. The models developed for capturing the effects of particles on the apparent dynamic viscosity proved effective for this specific substrate. Results from cross-coupling the reaction models with computational fluid dynamic simulations provide a novel approach to capturing the secondary effect of substrate conversion and particle distribution on the performance of the fermentation vessels. This is the first time where that biological reactions were successfully combined with particle dynamics and fluid flow fields to investigate the secondary effects which occur in fermenters. This work served as a foundation for future research and development within the bioethanol field with significant potential for expansion into other biochemical disciplines. / AFRIKAANSE OPSOMMING: Tweede-generasie bioetanol is ’n alternatiewe vervoerbrandstof wat tans ondersoek word waar sellulose, spesifiek lignosellulosiese (houtagtige) gedeeltes, van enige plantmassa na etanol omgesit kan word. Tot op hede was die tegnologie slegs suksesvol geïmplimenteer in demonstrasieskaal fasiliteite. Ten spyte van intensiewe navorsingpogings op laboratoriumskaal, is niemand seker wat die sekondêre effekte van die opskaal tot groot stelsels sal wees nie. Die doelwit van die projek was om drie-dimensionele modelle te ontwikkel van ’n laboratoriumskaal fermentor wat die effekte van partikulêre vermenging en reaksiekinetika kan voorspel vir toekomstige opskaal navorsing. ’n Numeriese model van die reaksiekinetika vir gelyktydige versuikering en fermentasie van Avicel (mikrokristallyne sellulose) partikels tot etanol word aangebied. Die oorspronklikheid van die model is geleë in die skeiding van die twee primêre sellulase ensiemkinetika, wat lei tot die vermoë om die heterogene gedrag van die ensiem-substraat interaksies te voorspel. Hierdie model verbeter die kennis van die stelsels, terwyl voldoende eenvoud behoue bly vir implementering parallel aan kommersiële berekeningsvloeidinamika sagteware. Effekte van die verskillende bestanddele van die fermentasiemedium en die invloed van elk op die dinamiese viskositeit van die medium is ook ondersoek. Resultate dui aan dat partikel volume fraksie die dominante invloed op die skynbare dinamiese viskositeit het, wat gelei het tot verdere ondersoek van die partikel eienskappe. As gevolg van die onreëlmatige vorms van Avicel partikels, is toetse gedoen om die sleur-en uitsakkingsgedrag te bepaal, wat gelei het tot die ontwikkeling en aanpassing van modelle om hierdie verskynsels in ag te neem. Hierdie ondersoek is uniek, want dit laat meer akkurate berekening van partikelvervoer deur ’n drie-dimensionele omgewing toe, insluitend die effekte van natuurlike verpakkingsdigtheid. By laer partikel volume fraksie het die konsentrasie van etanol en gliserol die grootste effek op die skynbare dinamiese viskositeit gehad en was bereken vanaf modelle in die literatuur. Bevestiging van die fisika en die insluiting daarvan in die simulasies het gelei tot die aanpasing van verskillende generiese modelle wat óf numeriese stabiliteit óf akkuraatheid óf beide verbeter. Bydraes gemaak sluit ’n aangepaste vorm van die drukkragmodel in, wat heelwat meer stabiel en akkuraat was as die vorige modelle voorgestel in die literatuur. Die modelle wat ontwikkel is om die effek van partikels op die skynbare viskositeit vas te vang, was effektief bewys vir hierdie spesifieke substraat. Resultate van die kruiskoppeling van inligting vanaf die reaksiemodelle met berekeningsvloeidinamika simulasies lewer ’n nuwe benadering tot die bepaling van die sekondêre effek van substraatomskakeling en partikeldistribusie op die uitvoering van die fermentasie toestel. Hierdie is die eerste poging om biologiese reaksies met partikel dinamika en vloeivelde te kombineer om die sekondêre effekte wat in fermenter plaasvind, te ondersoek. Hierdie werk dien as ’n grondslag vir toekomstige navorsing en ontwikkeling binne die bioetanolveld, met beduidende potensiaal vir uitbreiding na ander biochemiese dissiplines.

Dissertation (PhD)--University of Stellenbosch, 2007. / ENGLISH ABSTRACT: The globalisation is increasing the complexity of product development in terms of product variants and the range of technologies implemented. It emphasises the requirement for developing various design information support systems for the world market. However, small and medium enterprises that employ a wide range of design procedures may not be able to afford customised information support systems, with the result that there is a need for flexible, i.e. easily adaptable, design support tools. Four case studies were carried out to investigate the requirements for an information support system aimed at the design process and design documents. They indicated that a design information support system aimed at supporting design teams in the pre-detail mechanical design phases should be able to adapt various design methods and handle design information in a flexible way. Flexible here means being applicable over a wide range of contexts and extendable without affecting data already captured. Ontology based approaches are widely applied where diverse information has to be handled. The development of the Internet today also makes a distributed design approach more and more popular for mechanical design. An internet-based design support system called DiDeas II (Distributed Design assistant) was developed here with an ontologybased approach implemented to provide distributed and flexible assistance during concept generation in small companies. The DiDeas II has separate server side and client side programs, which communicate through a TCP/IP connection. DiDeas II allows design teams to manage their design information according to various design methods, to decrease time-delays and to improve communication between team members. These benefits were confirmed in two case studies carried out to evaluate DiDeas II. Keywords: Distributed design; ontology; concept design, web-based system. / AFRIKAANSE OPSOMMING: Globalisering verhoog die kompleksiteit van produkontwikkeling, in terme van produk variante en die bereik van tegnologieë wat geïmplementeer word. Dit beklemtoon die behoefte om verskeie ontwerp-inligting-ondersteuningstelsels vir die wêreldmark te ontwikkel. Klein en medium ondernemings wat 'n wye spektrum ontwerpsprosedures gebruik, kan egter nie doelgemaakte inligting-ondersteuningstelsels bekostig nie, met die gevolg dat daar 'n behoefte vir maklik-aanpasbare ontwerp ondersteuningstelsels is. Vier gevallestudies is uitgevoer om die vereistes vir 'n inligting-ondersteuningstelsel gemik op die ontwerpproses en ontwerp dokumente, te ondersoek. Dit het aangetoon dat 'n ontwerp-inligting-ondersteuningstelsel, wat ontwerpspanne in die voor-detail meganiese ontwerp fases moet ondersteun, by verskeie ontwerpmetodes moet kan aanpas en ontwerpsinligting op 'n aanpasbare manier kan hanteer. Aanpasbaarheid in hierdie konteks beteken toepaslik oor 'n wye spektrum kontekste en uitbreibaar sonder om data wat alreeds ingevoer is, te beïnvloed. Ontologie-gebaseerde benaderings word wyd toegepas waar diverse inligting hanteer moet word. Die ontwikkeling van die Internet maak 'n verspreide-ontwerpbenadering meer en meer gewild vir meganiese ontwerp. 'n Internet-gebaseerde ontwerpondersteuningstelstel genaamd DiDeas II (Distributed Design assistant) is hier ontwikkel met 'n ontologie-gebaseerde benadering wat daarop gemik is om verspreide, aanpasbare hulp te verleen aan klein maatskappye gedurende konsep- ontwikkeling. Die DiDeas II stelsel het afsonderlike bediener en kliënt programme wat deur 'n TCP/IP verbinding kommunikeer. DiDeas II laat ontwerpspanne toe om hulle ontwerp inligting volgens verskeie ontwerpmetodes te bestuur, tydvertragings te verminder en om kommunikasie tussen spanlede te verbeter. Hierdie voordele is bevestig in twee gevallestudies wat uitgevoer is om DiDeas II te evalueer. Sleutelwoorde: Verspreide ontwerp; ontologie; konsepontwerp; web-gebaseerde stelsel.

Thesis (PhD)--University of Stellenbosch, 2002. / ENGLISH ABSTRACT: The findings of an investigation into the requirements of a support system for distributed conceptual design in small and medium enterprises are presented. Distributed conceptual design refers to the collaboration of spacially distributed design teams during the early stages of the product development process. Three main elements of a support system were identified. The first element, 'Design Methodology', places a framework for specification development, functional analysis, concept generation and concept evaluation at the designers' disposal. It systematically guides the users through the different steps of the design process. These steps can be performed either alone, or together with other team members. The users are also aided in documenting their steps in order to allow the team members or designers of followup projects to understand the decisions made. The second element, 'Communication and Information Transfer', co-ordinates the communication between the distributed designers and provides a platform for the exchange of design-related data, e.g. customer requirements, ideas, sketches, comments, and decisions. A case study was carried out to assess the use of various tools for communication and information transfer during synchronous and asynchronous collaboration. The case study is described and the results are presented and discussed. Both elements make use of a support service providing various 'Input Devices for Conceptual Design', the third element of a support system. While standard tools such as mouse and keyboard meet the requirements of subsequent stages of the design process, they are often impractical in creating or annotating sketches. Various low-cost input devices were investigated. A framework was developed to integrate the three elements into one support system. The 'Distributed Design Assistant', abbreviated as 'DiDeas', is an Internet-based system that allows simultaneous multi-user collaboration. A relational database is located on a central web-server and stores all design information entered into the system. The user interface was realized in the form of a collection of Microsoft Active Server Pages, which can be accessed platform-independently via a standard webbrowser. The development of the database structure and of the user interface is described in detail. A second case study was carried out to evaluate the Distributed Design Assistant. The case study is described and the results are presented and discussed. The low-cost system has proven to be a very useful tool for distributed conceptual design. The Distributed Design Assistant systematically guides novice and experienced designers through the stages of specification development and conceptual design. It facilitates the easy collection and the fast exchange of a large amount of textual and graphical information during these stages. Although the system is relatively simple, compared to professional product data management systems used in later stages of the design process, it strongly enhances the productivity of designers and distributed design teams. Keywords: Distributed Design, Conceptual Design, Systematic Product Development / AFRIKAANSE OPSOMMING: Die bevindinge van 'n ondersoek na die behoeftes van 'n ondersteuningstelsel VIr verspreide konsepsionele ontwerp in klein en medium ondernemings word aangebied. Verspreide konsepsionele ontwerp is die saamwerk van ruimtelik verspreide ontwerp spanne gedurende die aanvanklike fases van die produk ontwikkelingsproses. Drie hoof elemente van 'n ondersteuningstelsel is geïdentifiseer. Die eerste element, 'Ontwerpmetodiek' stel 'n raamwerk vir spesifikasie ontwikkeling, funksionele analise, konsep generasie en konsep beoordeling tot beskikking van die ontwerpers. Dit lei die gebruikers stelselmatig deur die verskillende stappe van die ontwikkelingsproses. Die stappe kan of alleen of tesame met ander lede van die span uitgevoer word. Die gebruiker word ook ondersteun met die dokumentasie van die stappe sodat die lede of ontwerpers van opvolgprojekte die besluite wat gemaak is, kan begryp. Die tweede element, 'Kommunikasie en Informasie Oordrag', koordineer die kommunikasie tussen die verspreide ontwerpers en bied 'n platvorm vir die uitruil van ontwerpinformasie, byvoorbeeld kliënte behoeftes, idees, sketse, kommentaar en besluite. 'n Gevallestudie is uitgevoer om die gebruik van verskeie gereedskapstukke vir kommunikasie en informasie-oordrag gedurende sinchrone en asinchrone samewerking te beoordeel. Die gevalle studie is beskryf en die resultate is bespreek. Altwee elemente maak gebruik van 'n ondersteuningsdiens wat verskeie 'Invoergereedskap vir Konsepsionele Ontwerp' voorsien, die derde element van die ondersteuningstelsel. Terwyl standard gereedskap, byvoorbeeld 'n rekenaar muis en sleutelbord, die behoeftes van die latere ontwerpsfases bevredig, is hulle dikwels onprakties vir die maak van sketse en byskrifte. Verskeie laekoste invoergereedskap is ondersoek. 'n Raamwerk is ontwikkel om die drie elemente in een ondersteuningstelsel te integreer. Die 'Distributed Design Assistant', verkort 'DiDeas', is 'n Internet-gebaseerde stelsel wat sinchrone multi-gebruiker samewerking moontlik maak. 'n Gekoppelde databasis is op 'n sentrale webbediener geplaas en versamel al die ontwerpinformasie wat in die stelsel ingevoer is. Die gebruikerintervlak is geskep as 'n versameling van Microsoft Active Server Pages. Toegang tot die stelsel is onafhanklik van die rekenaar bedryfstelsel en kan verkry word met 'n standard webblaaier. Die ontwikkeling van die databasisstruktuur en van die gebruikerintervlak is in detail beskryf. 'n Tweede gevallestudie is uitgevoer om die Distributed Design Assistant te beoordeel. Die gevallestudie is beskryf en die resultate is bespreek. Die laekoste stelsel het homself bewys as 'n baie nuttige werktuig VIr verspreide konsepsionele ontwerp. Die Distributed Design Assistant lei nuweling en ervare ontwerpers stelselmatig deur die spesifikasie ontwikkeling en konsepsionele ontwerp stappe. Dit fasiliteer die maklike versameling en die vinnige uitruil van 'n groot hoeveelheid teks en grafiese informasie gedurende hierdie stappe. Ofskoon die stelsel relatief eenvoudig is in vergelyking met professionele produkdata-bestuurstelsels, verhoog dit die produktiwiteit van ontwerpers en verspreide ontwerp spanne aansienlik.

Thesis (PhD) -- University of Stellenbosch, 2010. / ENGLISH ABSTRACT: In the design of a modern natural draught wet-cooling tower (NDWCT), structural and performance characteristics must be considered. Air flow distortions and resistances must be minimised to achieve optimal cooling which requires that the cooling towers must be modelled two-dimensionally and ultimately threedimensionally to be optimised. CFD models in literature are found to be limited to counterflow cooling towers packed with film fill, which is porous in one direction only and generally has a high pressure drop, as well as purely crossflow cooling towers packed with splash fill. This simplifies the analysis considerably as the effects of flow separation at the air inlet are minimised and fill performance is determined using the method of analysis originally employed to determine the fill performance characteristics from test data. Many counterflow cooling towers are, however, packed with trickle and splash fills which have anisotropic flow resistances, which means the fills are porous in all flow directions and thus air flow can be oblique through the fill, particularly near the cooling tower air inlet. This provides a challenge since available fill test facilities and subsequently fill performance characteristics are limited to purely counter- and crossflow configuration. In this thesis, a CFD model is developed to predict the performance of NDWCTs with any type of spray, fill and rain zone configuration, using the commercial code FLUENT®. This model can be used to investigate the effects of different: atmospheric temperature and humidity profiles, air inlet and outlet geometries, air inlet heights, rain zone drop size distributions, spray zone performance characteristics, variations in radial water loading and fill depth, and fill configurations or combinations on cooling tower performance, for optimisation purposes. Furthermore the effects of damage or removal of fill in annular sections and boiler flue gas discharge in the centre of the tower can be investigated. The CFD modelling of NDWCTs presents various options and challenges, which needed to be understood and evaluated systematically prior to the development of a CFD model for a complete cooling tower. The main areas that were investigated are: spray and rain zone performance modelling by means of an Euler-Lagrangian model; modelling of air flow patterns and flow losses; modelling of fill performance for oblique air flow; modelling of air pressure and temperature profiles outside and inside the cooling tower. The final CFD results for the NDWCT are validated by means of corresponding one-dimensional computational model data and it is found that the performance of typical NDWCTs can be enhanced significantly by including protruding platforms or roundings at the air inlet, reducing the mean drop size in the rain zone, radially varying the fill depth and reducing the air inlet height. / AFRIKAANSE OPSOMMING: By die ontwerp van ‘n moderne natuurlike trek nat koeltoring (NTNK), moet strukturele en werkverrigtings eienskappe in ag geneem word. Wanverdeelde lugvloei en vloeiweerstande moet geminimaliseer word om optimale verkoeling te bewerkstellig, wat vereis dat die koeltorings twee-dimensioneel en uiteindelik driedimensioneel gemodelleer moet word om hulle te kan optimeer. Dit is gevind dat berekeningsvloeidinamika (BVD of “CFD” in engels) modelle in die literatuur, beperk is tot teenvloei koeltorings gepak met film tipe pakking, wat net in een vloeirigting poreus is en boonop gewoonlik ook ‘n hoë drukval het, sowel as suiwer dwarsvloei koeltorings met spatpakking. Hierdie vergemaklik die analise aansienlik omdat die effekte van vloeiwegbreking by die luginlaat verklein word en die pakking se werkverrigtingsvermoë bereken kan word met die analise metode wat oorspronklik gebruik is om die pakkingseienskappe vanaf toets data te bepaal. Baie teenvloei koeltorings het egter drup- (“trickle”) of spatpakkings met anisotropiese vloeiweerstand, wat beteken dat die pakking poreus is in alle vloeirigtings en dat die lug dus skuins deur die pakking kan vloei, veral naby die koeltoring se lug inlaat. Hierdie verskaf ‘n uitdaging aangesien beskikbare pakking toetsfasiliteite, en dus ook pakking karakteristieke, beperk is tot suiwer teenvloei en dwarsvloei konfigurasie. ‘n BVD model word in hierdie tesis ontwikkel wat die werkverrigtingsvermoë van NTNK’s kan voorspel vir enige sproei, pakking en reënsone konfigurasie deur van die kommersiële sagteware FLUENT® gebruik te maak. Hierdie model kan gebruik word om die effekte van verskillende: atmosferiese temperatuur- en humiditeitsprofiele, lug inlaat en uitlaat geometrië, lug inlaat hoogtes, reënsone druppelgrootteverdelings, sproeisone werkverrigtingskarakteristieke, variasie in radiale waterbelading en pakking hoogte, en pakking konfigurasies of kombinasies op koeltoringvermoë te ondersoek vir optimerings doeleindes. Verder kan die effekte van beskadiging of verwydering van pakking in annulêre segmente, en insluiting van ‘n stoomketel skoorsteen in die middel van die toring ondersoek word. Die BVD modellering van NTNK bied verskeie moontlikhede en uitdagings, wat eers verstaan en sistematies ondersoek moes word, voordat ‘n BVD model van ‘n algehele NTNK ontwikkel kon word. Die hoof areas wat ondersoek is, is: sproeien reënsone modellering mbv ‘n Euler-Lagrange model; modellering van lugvloeipatrone en vloeiverliese; modellering van pakking verrigting vir skuins lugvloeie; modellering van lugdruk- en temperatuurprofiele buite en binne in die koeltoring. Die BVD resultate word mbv van data van ‘n ooreenstemmende eendimensionele berekeningsmodel bevestig en dit is bevind dat die werkverrigting van ‘n tipiese NTNK beduidend verbeter kan word deur: platforms wat uitstaan of rondings by die luginlaat te installeer, die duppelgrootte in die reënsone te verklein, die pakkingshoogte radiaal te verander, en die luginlaathoogte te verlaag.

Thesis (PhD (Mechanical Engineering))--University of Stellenbosch, 1990. / Leaves printed on single pages, preliminary pages i- viii and numbered pages 1-1-R5. Includes bibliography, list of tables and figures and list of appendices. Digitized at 330 dpi black and white PDF format (OCR),using KODAK i 1220 PLUS scanner. / ENGLISH ABSTRACT: A numerical procedure for predicting the effect of inlet flow distortions on the performance of axial flow fans is proposed. The study is aimed specifically at fans of low solidity and low hub-to-tip ratios, which have attained some importance with the advent of large directly air-cooled power stations in certain arid regions of the world. The numerical model is an extension to cylindrical polar coordinates of the SIMPLEN algorithm that has been developed by the author previously. The algorithm is implemented in a computer code, FLOVAX, which solves the incompressible Navier-Stokes equations, augmented by the k-Ɛ model of turbulence, on a computational domain that is aligned with the cylindrical polar coordinate system. Several relatively simple flow problems are solved to verify the code: laminar stagnation flow, laminar flow near a rotating disk, turbulent flow near a propeller, turbulent flow through an abrupt axisymmetric expansion, and turbulent swirling flow in an annulus. Good agreement is obtained between the numerical solutions and the corresponding analytical, empirical or published experimental and numerical results. Some experimental results are also presented: measurements of shaft power, volume flow rate and static pressure rise were taken in a setup comprising an axial flow fan mounted in the wall of a wind tunnel. The wind tunnel was used to provide flow across the fan intake, thus establishing distorted inflow conditions. Detailed measurements of the velocity and static pressure distributions in the duct downstream of the fan rotor were also performed. It is clear from the results that flow across the intake of the test fan has a detrimental effect on its performance in that an increased amount of power is necessary to deliver the same flow rate as with no crossflow. In the numerical predictions, blade element theory is used to model the thrust and torque exerted by the fan blades on the air. The numerical results generally confirm the results of the experiment, although the increase in power is underestimated: an increase of only approximately half of the measured increase is predicted. Several recommendations for improvement of the numerical procedure are made. / AFRIKAANSE OPSOMMING: 'n Numeriese prosedure vir die voorspelling van die invloed van versteurings in inlaatvloei op die werking van aksiaalwaaiers word daargestel. Die studie is spesifiek gemik op waaiers van lae soliditeit en lae lempunt-tot-naafverhoudings. Waaiers van hierdie tipe het belangrikheid verwerf sedert die onlangse totstandkoming van groot lugverkoelde kragstasies in sekere droe werelddele. Die numeriese model is 'n uitbreiding na silindriese poolkoordinate van die SIMPLEN-algoritme wat voorheen deur die skrywer ontwikkel is. Die algoritme word geimplementeer in 'n rekenaarkode, FLOVAX, wat die onsamedukbare Navier-Stokes-vergelykings, aangevul deur die k-Ɛ-turbulensiemodel, oplos op 'n berekeningsgebied wat saamval met die silindriese poolkoordinaatstelsel. Verskeie relatief eenvoudige vloeiprobleme word opgelos ter verifikasie van die kode: laminere stagnasievloei, laminere vloei op 'n roterende skyf, turbulente vloei deur 'n propeller, turbulente vloei deur 'n aksiaalsimmetriese vernouing, en turbulente roterende vloei in 'n annulus. Goeie ooreenstemming tussen die numeriese oplossings en die ooreenstemmende analitiese, empiriese of gepubliseerde eksperimentele en numeriese resultate is verkry. Eksperimentele resultate word ook aangebied: metings van asdrywing, volumevloei en statiese drukstyging is geneem in 'n opstelling wat bestaan het uit 'n aksiaalwaaier wat in die wand van 'n windtonnel gemonteer is. Die windtonnel is gebruik om versteurde-invloei-toestande te genereer in die vorm van dwarsvloei oor die waaier-inlaat. Snelheids- en statiese drukverdelings in die kanaal stroom-af van die waaierrotor is ook gemeet. Dit blyk duidelik uit die resultate dat die dwarsvloei oor die inlaat van die toetswaaier 'n nadelige uitwerking het op die werking daarvan in die opsig dat meer drywing nodig is om dieselfde vloeitempo te handhaaf as wat die geval is sonder dwarsvloei. Vir die numeriese voorspellings word van lem-element-teorie gebruik gemaak om die stukrag en draaimoment wat deur die waaier op die lug uitgeoefen word, te modelleer. Die numeriese resultate bevestig oor die algemeen die eksperimentele resultate, alhoewel die drywingstoename onderskat word met sowat die helfte van die gemete toename. Verskeie aanbevelings ter verbetering van die numeriese prosedure word gemaak.