The reaction between the tetrahedrane cluster RCCo3(CO)9{R = CHO (1), H (3)} and the redox-active diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3- dione (bpcd) leads to the replacement of two CO groups and formation of RCCo3(CO)7(bpcd) {R = CHO (2), H (4)}. Clusters 2 and 4 are thermally unstable and readily transform into the new P-C bond cleavage cluster 5. All three clusters 2, 4, and 5 have been isolated and fully characterized in solution by IR and 31P NMR spectroscopy. VT 31P NMR data indicate that the bpcd ligand in RCCo3(CO)7(bpcd) is fluxional at 187 K in THF. Clusters 2, 4, and 5 have been structurally characterized by X-ray diffraction analyses.

Syntheses of diphosphine gold (I) complexes from gold THT and two ligands, 4, 5-bis (diphenylphosphino)-4-cyclopenten-1, 3-dione (BPCD) and 2,3-bis(diphenylphosphino)-N-phenylmaleimide (BPPM), were done separately. The reactions happened under ice conditions followed by room temperature conditions and produced two diphosphine gold (I) complexes in moderated yield. Spectroscopic results including nuclear magnetic resonance (NMR) and X-ray crystallography were used to study and determine the structures of the products formed. Moreover, X-rays of all newly synthesized diphosphine gold (I) complexes were compared with the known X-ray structures of other phosphine and diphosphine gold (I) complexes. There were direct resemblances in terms of bond length and angle between these new diphosphine gold (I) complex structures and those already published. For instance, the bond lengths and angles from the newly prepared diphosphine gold (I) complexes were similar to those already published. Where there were some deviations in bond angles and length between the newly synthesized structures and those already published, appropriate explanation was given to explain the deviation. Heterocyclic ligands bearing acetylacetonate (ACAC) side arm(s) were prepared from ethyl malonyl chloride and the heterocyclic compounds 8-hydroxylquinoline, Syn-2-peridoxyaldoxime, quinoxalinol and 2, 6-dipyridinylmethanol. The products (heterocyclic ACAC ligands) from these reactions were screened with transition metal carbonyl compounds in thermolytic reactions. The complexes formed were studied and investigated using NMR and X-ray crystallography. Furthermore, the X-ray structures of the heterocyclic ACAC ligand or ligand A and that of rhenium complex 1 were compared with similar published X-ray structures. The comparison showed there were some similarities in terms of bond length and bond angles.

Investigations presented here are (a) the study of reorientational dynamics and internal rotation in transition metal complexes by NMR relaxation experiments, and (b) the study of ligand exchange dynamics in transition metal complexes by exchange NMR experiments. The phenyl ring rotation in Ru3(CO)9(μ3-CO)(μ3-NPh) and Re(Co)2(CO)10(μ3- CPh) was monitored by 13C NMR relaxation experiments to probe intramolecular electronic and/or steric interactions. It was found that the rotation is relatively free in the first complex, but is restrained in the second one. The steric interactions in the complexes were ascertained by the measurement of the closest approach intramolecular distances. The rotational energy barriers in the two complexes were also calculated by using both the Extended Hiickel and Fenske-Hall methods. The study suggests that the barrier is due mainly to the steric interactions. The exchange NMR study revealed two carbonyl exchange processes in both Ru3(CO)9(μ3-CO)(μ3-NPh) and Ru3(CO)8(PPh3)(μ3-CO)(μ3-NPh). The lower energy process is a tripodal rotation of the terminal carbonyls. The higher energy process, resulting in the exchange between the equatorial and bridging carbonyls, but not between the axial and bridging carbonyls, involves the concerted formation of edge-bridging μ2-CO moieties. The effect of the PPh3 ligand on the carbonyl exchange rates has been discussed. A combination of relaxation and exchange NMR found that PPh3 ligand rotation about the Ru-P bond is slow on the exchange NMR time scale and the phenyl rotation about the P-Cipso bond is fast on the exchange NMR time scale but is slow on the NMR relaxation time scale.

Earth-abundant first-row transition metals have seen a renaissance in chemistry in recent years due to their relatively low toxicity and cost in comparison to precious metals. Furthermore open-shell transition metal complexes exhibit useful one-electron redox processes which contrasts to their heavier d block anologues. This thesis aims to synthesize and analyse the structure and reactivity of low-coordiante first-row transition metal complexes of from groups 7-9 with an aim to utilize these species in catalysis. The divalent compound [Co{N(SiMe3)2}2] reacts with the primary phosphines PhPH2 in the presence of an NHC ligand (IMe4) to yield the phosphinidene bridged dimer [(IMe4)2Co(µ-PMes)]2. The complex has interesting magnetic properties due to strong antiferromagnetic coupling between the two cobalt(II) centres. Increasing the steric bulk of the NHC yielded carbene-phosphinidene adducts (NHC·PAr). This transformation was shown to be catalytic. The structure and reactivity of complexes of the type [(NHC)xMn{(N(SiMe3)2}2] were investigated. The complexes exhibit similar structural properties to their iron and cobalt analogues; however their reactivity has been shown to differ. The addition of primary phosphines to complexes of the type [(NHC)xMn{N(SiMe3)2}2] yielded a range of manganese phosphide complexes. [Mn{N(SiMe3)2}2] also reacts with imidazolium salts at elevated temperatures to yield heteroleptic manganese NHC complexes. The reaction of [Mn{N(SiMe3)2}2] with IPr·HCl afforded the abnormal carbene complex [(aIPr)Mn{N(SiMe3)2}µ-Cl]2. A new monoanionic bidentate ligand is reported which has shown to be a useful ligand system to stabilize three-coordiante iron(II) complex. The reaction of [(L)Fe(Br)] with mesitylmagnesium Grignard or n-butyllithium yield the iron hydrocarbyls [(L)Fe(Mes)] and [(L)Fe(nBu)] with the latter being stable to β-hydrogen elimination. Finally [(L)Fe(nBu)] has been utilized as a pre-catalyst in the hydrophosphination of internal alkynes, showing selectivity for the E-isomeric vinylphosphine.

This thesis includes the synthesis, characterisation, antioxidant and antimicrobial activities of Cu(II)-, Co(II)- and Co(III) complexes with N,N'-bis(3- methoxysalicylaldimine)propan-2-ol, 2-OH-oVANPN. The Schiff base ligand, 2-OHoVANPN, is derived from o-vanillin and 1,3-diaminopropan-2-ol. The o-vanillin condensed with 1,3-diaminopropan-2-ol in a 2:1 molar ratio yields this potential tetraor pentadentate ligand. The complexes synthesized are tetra (or penta or hexa) coordinated. Formation of the complexes is symbolized as follows:- MX₂ + 2-OH-oVANPN (2:1) -> [M(2-OH-oVANPN)Xn] + HnX MX₂ + 2-OH-oVANPN (2:1) -> [Mn(2-OH-oVANPN)OH] + H₂X₂ MX₂ + (o-vanillin : diaminopropanol) (1:1) -> [M(1:1)X₂] MX₂ + (o-vanillin : diaminopropanol) (1:1) -> [M₃(1:1)X₄] M = Cu(II), Co(II) or Co(III); X = Cl; n = 1, 2. Their structural features have been deduced from their elemental analytical data, IR spectral data, and electronic spectral data. With the exception of {Cu₃(C₁₁H₁₄N₂O₃)(Cl)₄(H₂O)₆}(A4), the Cu(II) complexes were monomeric with 2-OH-oVANPN acting as a tetradentate ligand. A binuclear Co(II) complex, [Co₂(C₁₉H₁₉N₂O₅)(OH)] (B1), was synthesised and the rest of the Co(II) and Co(III) complexes were monomeric with chloride ions coordinating to the metal centre in some cases. Electronic data suggest that the cobalt(II) complexes have octahedral geometries and the copper(II) complexes have square planar structures – Co(III) is likely to be octahedral. Thermal analyses, which included the copper-block-method for determining sublimation temperatures, revealed that some copper(II) and cobalt(II) complexes are hygroscopic and sublime at 200 °C and below. DSC analyses of the Cu(II) complexes gave exotherms around 300 °C for complexes K[Cu(C₁₉H₂₀N₂O₅)(OH)]·2H₂O (A1) and [Cu(C₁₁H15N₂O₃)(Cl)₂]·2H₂O (A2) and above 400 °C for [Cu(C₁₁H₁₆N₂O₃)(Cl)₂] (A3) and {Cu₃(C₁₁H₁₄N₂O₃)(Cl)₄(H₂O)₆} (A4). Antioxidant studies were carried out against the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH·). The cobalt(II) complex, [Co₂(C₁₉H₁₉N₂O₅)(OH)] (B1), which was synthesized in the presence of KOH, had no antioxidant activity, whilst the other cobalt(II) complexes, [Co(C₁₇H₁₇N₂O₅(Cl))]·1½H₂O (B2), [Co(C₁₉H₂₂N₂O₅) (Cl)₂]·5½H₂O (B3) and [Co(C₁₉H₂₂N₂O₅)(Cl)₂]·5½H₂O (B4), which were synthesised in the absence of KOH, demonstrated antioxidant activity. The latter complexes are candidates for cancer cell line testing, while [Cu(C₁₁H₁₆N₂O₃)(Cl)₂] (A3), {Cu₃(C₁₁H₁₄N₂O₃)(Cl)₄(H₂O)₆} (A4), [Co(C₁₉H₂₁N₂O₅)(Cl)₂ ]·5H₂O (C2) and [Co(C₁₉H₂₀N₂O₅)(Cl)]·3H₂O (C3) may show anticancer activity through possible hydrolysis products. Most of the complexes synthesized displayed antimicrobial activity against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Aspergillus niger and Candida albicans. The results indicated that complexes [Cu(C₁₁H₁₆N₂O₃)(Cl)₂](A3), [Co(C₁₉H₂₂N₂O₅)(Cl)₂]·5½H₂O (B3) and [Co(C₁₉H₂₁N₂O₅)(Cl)₂ ]·5H₂O (C2) are active against the Gram-negative Ps. aeruginosa and that the ligand, 2-OH-oVANPN, did not have any activity. The same trend was observed with 2-OH-oVANPN, {Cu₃(C₁₁H₁₄N₂O₃)(Cl)4(H₂O)₆} (A4) and [Co(C₁₉H₂₀N₂O₅)(Cl)]·3H₂O (C3) against the Gram-positive S. aureus. As for activity against E. coli and C. albicans, some complexes showed more activity than the ligand. There is an observed trend here that the metal complexes are more active (toxic) than the corresponding ligand, which is in agreement with Tweedy’s chelation theory.

Density Functional Theory (DFT) is an effective tool for studying diverse metal systems. Presented herein are studies of a variety of metal systems, which can be applied to accomplish transformations that are currently difficult/impossible to achieve. The specific topics studied utilizing DFT include: 1) C–H bond activation via an Earth-abundant transition metal complex, 2) C–H bond deprotonation via an alkali metal superbase, 3) and amination/aziridination reactions utilizing a CuI reagent. Using DFT, the transformation to methanol (CH3OH) from methane (CH4) was examined. The transition metal systems studied for this transformation included a model FeII complex. This first-row transition metal is an economical, Earth-abundant metal. The ligand set for this transformation includes a carbonyl ligand in one set of complexes as well as a phosphite ligand in another. The 3d Fe metal shows the ability to convert alkyls/aryls to their oxidized counterpart in an energetically favorable manner. Also, “superbasic” alkali metal amides were investigated to perform C—H bond cleavage. Toluene was the substrate of interest with Cs chosen to be the metal of interest because of the highly electropositive nature of this alkali metal. These highly electrophilic Cs metal systems allow for very favorable C—H bond scission with a toluene substrate. Finally, the amination and aziridination of C–H and C=C bonds, respectively, by a CuI reagent was studied. The mechanism was investigated using DFT calculations. Presently, these mechanisms involving the use of coinage metals are debated. Our DFT simulations shed some insight into how these transformations occur and ultimately how they can be manipulated.

Recently, the Parkin group has synthesized tris[(1-isopropylbenzimidazol-2-yl)dimethylsilyl]methane, [Tismᴾʳⁱᴮᵉⁿᶻ]H, a bulky tetradentate tripodal ligand, which upon deprotonation can coordinate to metal centers via three nitrogen donor atoms and a carbon bridgehead to form metal atrane compounds. The [Tismᴾʳⁱᴮᵉⁿᶻ] ligand has been previously shown to stabilize metal hydride complexes, for example [Tismᴾʳⁱᴮᵉⁿᶻ]MgH [Tismᴾʳⁱᴮᵉⁿᶻ]ZnH. However, no attempts had been previously made to employ this ligand to stabilize heavier Group 12 analogues of these complexes, namely the cadmium and mercury hydride derivatives. In addition, all [Tismᴾʳⁱᴮᵉⁿᶻ] complexes previously reported have employed metals in the first or second oxidation states. In this work, an investigation is undertaken to use the [Tismᴾʳⁱᴮᵉⁿᶻ] ligand to stabilize rare examples of cadmium and mercury hydrides, as well as survey how this ligand binds to Group 13 and transition metals in a variety of oxidation states. In Chapter 1, a series of [Tismᴾʳⁱᴮᵉⁿᶻ] cadmium complexes are reported, including the novel cadmium hydride species [Tismᴾʳᴮᵉⁿᶻ]CdH, which is only the third terminal cadmium hydride species to be structurally characterized by X-ray diffraction. The reactivity of this complex has been probed, revealing the first detailed report of reactivity for a Cd-H bond, as well as the first comparison in relative reactivity between an analogous Cd-H and Zn-H bond. This reactivity of [Tismᴾʳⁱᴮᵉⁿᶻ]CdH includes the ability to insert CO₂ and CS₂, and the resulting cadmium formate and dithioformate complexes have been characterized and discussed, with the latter being the first structurally characterized example of a cadmium dithioformate complex. In addition, [Tismᴾʳⁱᴮᵉⁿᶻ]CdH can undergo hydride extraction to yield the ion pair {[Tismᴾʳⁱᴮᵉⁿᶻ]Cd}[HB(C6F5)₃], a rare example of trigonal monopyramidal cadmium complex. Finally, [Tismᴾʳⁱᴮᵉⁿᶻ]CdMe was synthesized, revealing a different coordination mode of the [Tismᴾʳⁱᴮᵉⁿᶻ] ligand than in the analogous [Tismᴾʳⁱᴮᵉⁿᶻ]ZnMe. In Chapter 2, a series of [Tismᴾʳⁱᴮᵉⁿᶻ] mercury complexes are reported and compared with their cadmium analogues. This comparison revealed several notable differences between [Tismᴾʳⁱᴮᵉⁿᶻ] mercury and cadmium complexes, most notably that the M-O-Si bond angle in [Tismᴾʳⁱᴮᵉⁿᶻ]HgOSiPh₃ is bent, as opposed to the linear [Tismᴾʳⁱᴮᵉⁿᶻ]CdOPh₃ derivative. The synthesis and characterization of [Tismᴾʳⁱᴮᵉⁿᶻ]HgH, the first mercury hydride complex to be structurally characterized by X-ray diffraction, is also reported. This complex has been crystallized in both the κ⁴ and κ³-coordination mode of the [Tismᴾʳⁱᴮᵉⁿᶻ] ligand, representing the first example of a [Tismᴾʳⁱᴮᵉⁿᶻ] compound to be structurally characterized in two coordination modes. In Chapter 3, the synthesis of Group 13 and transition metal [Tismᴾʳⁱᴮᵉⁿᶻ] complexes are reported. These compounds include the first examples of [Tismᴾʳⁱᴮᵉⁿᶻ]M(III) complexes, which reveal that trivalent Group 13 [Tismᴾʳⁱᴮᵉⁿᶻ]M halide compounds form charged ion pairs, whereas trivalent transition metal chloride compounds form six-coordinate octahedral complexes. The investigation into Group 13 [Tismᴾʳᴮᵉⁿᶻ] complexes also led to the structural characterization of [Tismᴾʳⁱᴮᵉⁿᶻ]In→InI₃, the first example of a [Tismᴾʳⁱᴮᵉⁿᶻ] compound with a metal-metal bond. A series of [Tismᴾʳⁱᴮᵉⁿᶻ]MCl (M = Mn, Fe, Co, Cu) complexes are reported and their metrical data compared, along with an investigation into the reactivity of [Tismᴾʳⁱᴮᵉⁿᶻ]NiBr, which led to spectroscopic evidence for a [Tismᴾʳⁱᴮᵉⁿᶻ]NiH complex. Finally, the gold complex [κ1-Tismᴾʳⁱᴮᵉⁿᶻ]AuPPh₃ is reported, which adopts a novel κ1-coordination of the [Tismᴾʳⁱᴮᵉⁿᶻ] ligand.

Thesis (PhD (Chemistry and Polymer Science))--Stellenbosch University, 2008. / Alkylated acetonitrile that forms during the synthesis of the sulfonium salt, [(Me3)2(MeS)S][BF4], is involved in the formation of new , -unsaturated Fischer-type carbene complexes from (CO)5M=C(OMe)CH2Li (M = Cr, W). Metal migration observed when the substitution product obtained from the reaction of the anionic carbene complexes (CO)5M=C(NMe2)CºC¯ (M = Cr, W) with Ph3PAu+ was left in solution, was also kinetically and theoretically investigated. 1H NMR and quantum mechanical (at the B3LYP level of theory) data indicated a complicated mechanism. The a,b-unsaturated Fischer-type carbene complex, (CO)5Cr=C(OMe)CH=C(Me)NH(Me), obtained from the reaction of (CO)5M=C(OMe)CH2¯ with alkylated acetonitrile, was transformed into the new remote one-N, six-membered, carbene ligand (rN1HC6) complex, (CO)5Cr=C(CH=C(Me)N(Me)CH=C(nBu). The carbene ligand unprecedentedly preferred the softer Rh(CO)2Cl moiety to the Cr(CO)5 metal fragment and transferred readily. A new series of remote and abnormal square planar compounds [r/a(NHC)(PPh3)2MCl]CF3SO3 (M = Pd or Ni) was prepared by oxidative substitution. The various positions for metal-carbon bond formation on a pyridine ring to furnish various ligand types i.e. C2 for nN1HC6, C3 for aN1HC6 or C4 for rN1HC6 received attention. The ligands were arranged in increasing order of carbene character, aNHC < nNHC < rNHC and trans influence, nN2HC5 ~ aN1HC6 ~ nN1HC6 < rN1HC6. In competitive situations, oxidative substitution occurred selectively at C4 of the pyridine ring rather than at C2 and on the aromatic ring containing the heteroatom (C4), rather than on an annealed aromatic ring (C7). Crystal and molecular structure determinations confirmed the preferred coordination sites. Quantum mechanical calculations (at the RI-BP86/SV level of theory) indicated that the chosen carbene ligand has a much larger influence than the metal on the BDE of the M-Ccarbene bond; the farther away the N-atom is from the carbene carbon, the stronger the bond. In complexes that also contain additional external nitrogen atoms, e.g. trans-chloro(N-methyl-1,2,4- trihydro-2-dimethylaminepyrid-4-ylidene)bis(triphenylphosphine)palladium(II) triflate and transchloro( N-methyl-1,2,4-trihydro-2-dimethylaminepyrid-4-ylidene)bis(triphenylphosphine)nickel(II) triflate, stabilisation originates from both the nitrogens. 2-Chloro-1-methyl-1H-pyrid-4-ylidenephenylammonium triflate afforded complexes with both remote as well as normal nitrogen atoms. New azole complexes of palladium and nickel with remote heteroatoms were also prepared from N-methyl-4',4'-dimethyl-2'-thiophen-3-chloro-2-yl-4,5-dihydro-oxazole. Employing the compound 1,5-dichloroanthraquinone, the product of a double oxidative substitution on two Pd centra could be isolated but not alkylated. The fact that the chemical shift of the metal bonded carbon in the 13C NMR spectrum can not be used as absolute measure of carbene character, was emphasised in a compound where the heteroatom was situated seven bonds away from the carbon donor. In efforts to synthesise a sulphur-bridged complex that contains carbene ligands, crystals of transdi- iodobis(1,3-dimethyl-imidazoline-2-ylidene)palladium were obtained. Bridged thiolato complexes with N1HC6 ligands were unexpectedly found in the attempt to substitute the halogen on chosen square planar carbene complexes of palladium, widening the application possibilities of N1HC6 ligands in organometallic chemistry beyond that of catalysis. A trinuclear cluster, [(PdPPh3)3(μ-SMe)3]BF4 was isolated as a by-product of these reactions. A series normal and abnormal thiazolylidene complexes of nickel and palladium were prepared by oxidative substitution of the respective 2-, 4- and 5-bromothiazolium salts with M(PPh3)4 (M = Pd or Ni), and unequivocally characterised. In a preliminary catalytic investigation, all the thiazolinium and simple pyridinium derived palladium complexes showed activity in the Suzuki-Miyaura coupling reaction. Little variation in activity in the order a (N next to carbon donor) > n > a (S next to carbon donor) was found for the former series, whereas decreased activity was exhibited in the sequence r > a > n of the latter group. The pyridinium derived complexes showed superior activity to the thiazolinium ones. The rNHC complex, trans-chloro(N-methyl-1,2,4-trihydro-2- dimethylaminepyrid-4-ylidene)bis(triphenylphosphine)palladium(II) triflate, showed similar Suzuki-Miyaura activity to the standard N2HC5 carbene complex precatalyst, trans-chloro[(1,3- dimethyl-imidazol-2-ylidene)triphenylphosphine]palladium(II) triflate.

This thesis presents ultrafast photophysical measurements on a number of phosphorescent iridium complexes and establishes relationships between the relaxation rates and the vibrational properties of the material. When ultrafast luminescence is measured on the peak of the phosphorescence spectrum and on its red-side, 230 fs and 3 ps decay time constants were observed in all materials studied, and this was attributed to population redistribution amongst the three electronic substates of the lowest triplet metal-ligand charge transfer (MLCT) state. The observation of luminescence at higher values of energy embodied ultrafast dissipation of excess energy by intramolecular vibrational redistribution (IVR) and it was found that the dissipation channels and rate of IVR could be modified by chemical modification of the emitting molecule. This was tested in two ways. Firstly by adding electronically inactive dendrons to the core, an increase in the preference for dissipation of excess energy by IVR rather than by picosecond cooling to the solvent molecules was found, but this did not change the rate of IVR. The second method of testing was by fusing a phenyl moiety directly onto the ligand, this both increased the rate of IVR and also the preference for dissipation by it rather than by picosecond cooling. Fluorescence was recorded in an iridium complex for the first time and a decay time constant of 65 fs was found, thus allowing a direct observation of intersystem crossing (ISC) to be made. In a deep red emitting iridium complex internal conversion (IC) and ISC were observed and the factors controlling their time constants deduced. IC was found to occur by dissipation of excess energy by IVR. The rate of IC was found to be dependent on the amount of vibrational energy stored in the molecule, with IC fast (< 45 fs) when < 0.6 eV of energy is stored and slower (~ 70 fs) when the value is > 0.6 eV. The rate of ISC agreed with these findings, indicating that the very process of ISC may be thought of as closely analogous to that of IC given the strongly spin-mixed nature of the singlet and triplet MLCT states.

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.