The thesis deals with the stages of development of Vysoke Myto road network with an emphasis to design an optional diversion of the traffic from the town itself even before the planned R35 is finished. The designed solution, including road connections to the present and future network, is to be functional, utilizable and economically desireable in all the stages of development.

The Thesis solves the issue of a design and construction of piping specifically focused on boiler apparatus and its equipment. This issue is important for creation of the piping classes in the (PDMS) programmes and for acceleration of output parameters which are mainly the temperature, materials, variable parameters, etc. This leads to other problems such as service life, security, economy, etc., are.

The thesis is focused on the design of the reconstruction of a house built in the 70s of the last century. Part of this work is an introduction with the current state of the object and calculation of the appropriate heat losses. In the next step, renovations containing building insulation, replacement windows and doors, replacement of the heating system and the installation of air conditioning are made. Based on the design of the adjustments are again calculated heat losses and a comparation of energy savings is made. Another part of the proposal focuses in detail on heating system and its regulation. The final chapter deals with the design of the ventilation device using heat recovery. Attachments contain detailed calculations and necessary documentation.

Since the beginning of the early 20th century bed rugs have been interesting research objects, but only in passing researchers have paid attention to rugs woven with rags. Noone has taken a closer look upon the reasons why people have woven these rugs. What does the materials of the rag – like recycled garments and interior textiles in the form of clothing rags – have to tell about the times when these rugs were woven? Did the rag rugs have any specific function or were the materials available and therefore used? The main sources of information are 21 rag rugs from Roslagen in Uppland, with a varied amount of rags. They were woven during the latter half of 19th century, and estate inventories from Väddö- and Häverö Ship District have altogether given some answers to the primary question of this paper: in wich way can the examined bed rugs bear witness to the use and value of recycled textile materials and the view of these in the context of the community where they were manufactured and used? This research doesn´t give an answer to whether these rugs have any particular function or not. Instead these rag rugs can be looked upon as representing a general development of the society towards an increasing amount of textiles surplus material. This being due an increasing consumption of factory-made clothing and textiles, manufactured in factories, as well as the paper mills development from producing paper made of cellulose rather than textile waste. To this we can add a principle lingering on from the 19th century, of domestic production and a thrift of resources. This resulted in an obvious recycling of discarded textiles. The home weaving of interior textiles was still strong by the end of the 19th century, and in Rosagen there was also a long tradition of weaving and of using rugs in the beds. At the same time there was, in the coastal regions of Roslagen, a local need for warming covers in boats and boat houses. This demand was related to the shooting of seals and other hunting in the coastal areas, as well as in the fishing- and maritime trades.

As the main goal of this thesis was determined a project proposal for optimization of educational trails in the selected area of the National park and Protected landscape area Šumava. Purpose of the project is the improvement of tourism by creating a new product. Based on the analysis the primary data was designed optimization project:Educational cycling route. The intention is to link the major attractions of the Šumava´s foothills Prachatice with cultural and natural attractions of Volary, which is situated in a protected landscape. The purpose of the project is to introduce visitors with the landscape and history and promote their awareness of environmental protection for a non-violent way. For the project was defined technical equipment, furniture routes. On the basis of delivering of tangible assets were determined the total costs.

The objective of this diploma thesis is search processing of tourism, his problematics and protection of the nature. In the other part this thesis deal with analysis of hiking trail in Labske piskovce PLA in focus of potentional atractive with proposal of new hiking trails in this location. Analysis containe all hiking trails in this location according to colored tourism distinction of trails. Proposal of new hiking trails was formed with regard on protection of nature thus at the same time was surrounding area approached for visitors as much as possible. Proposal comprise new and turisty often attended attractiviness. This proposal can produce increase of attractiviness in this district and the influx of new turists.

Abstrakt The diploma thesis is focused on the issue of securing serviceability of decontamination sites using the forces and the means available after cancellation of rescue battalions, and on the current position of the Fire Rescue Service. The objective of the thesis was to draw attention to the problem arising from insufficient securing of decontamination after cancellation of the rescue battalions intended for this activity. The output of the analysis of the present state and the state before cancellation of the rescue batallions is the finding that the solution currently used to secure decontamination is less effective. Therefore I have proposed a more effective solution based on maintaining rescue battalions together with the Fire Rescue Service. The raised hypotheses were confirmed through the concise charts that addressed the capabilities of the rescue units and the communication between individual brigades and departments will be verified in the planned exercise ZÓNA 2010 that will take place from 22 to 23 September 2010. In my thesis I made use of the available literature, findings from my bachelor thesis and from exercises ZÓNA 2007 and ZÓNA 2008, observations of experts, and terrain reconnaissance leading to proposing a suitable decontamination site. The thesis includes a proposal of a decontamination site in Hluboká nad Vltavou {--} Zámostí. I believe that there would be justification for submission of this proposal to the competent bodies. I regard my thesis as a good material for assessing the current state of this issue, proposing various solutions, and returning to greater care of citizens, as it used to be in previous year.

The master thesis deals with the design, tracing and dimensioning of condensate pipeline. In the beginning, a preliminary calculation of heat balance is done. It is followed by a description of the main condensate system supplemented by the computational design of pipeline and the calculation of pressure losses in this pipeline. The crucial part of the thesis is the calculation of pressure losses, which is done in two ways. The first approach to calculation of pressure losses in the pipeline is calculated using values of representative resistance coefficient for pipe ele-ments using Idelchik literature and for individual types of valves using values from datasheets of Siemens Energy suppliers. In the second approach to calculation representative resistance coefficients for pipe elements and individual types of valves CRANE literature are used. Then both approaches of choosing representative resistance coefficients are compared and evaluated. Based on the calculated values, a suitable pump is selected at the end of the master thesis.

The main goal of the diploma thesis is to design the hydraulic part of the new piping system, which is added to the existing project of the Dukovany Nuclear Power Plant. At the beginning of the work is theoretical basis for the design of the hydraulic part. The next part is the selection of piping material for aggressive refrigerant with subsequent verification of the pipe wall thickness. The piping system is designed with specific components from the companies SIGMA GROUP a.s., ARAKO spol. s.r.o. and ARMATURY Group a.s. In the last part, hydraulic solution is developed and commented using the excel program. The piping system is processed into the drawing documentation including bill of materials.

Urban study thesis deals with the more efficient utilization of the Brno Exhibition Centre in the longer term. The natural boundaries of the area in the alluvial plain formed on the northeast Hlinky street and Žlutý kopec, from the south-west street Bauer then head along the river Svratka. Thanks to its location near the city center and direct connection to the Prague highway is an important area ideal for design features of national importance. The aim is to open area all year round to the public and offer a diverse year-round and daily functional use. The effort is in place to attract as many people who will want to return. The original idea is to complete the entire structure of the new buildings in the western part of the terms of the original urban concept axes going from Pavilion A. The territory is divided into four functional zones - exhibitions, sport and recreation , work, education and culture. Additional functions of housing and facilities for the needs of the exhibition as well as other companies. In terms of transport, emphasis is put on pedestrians, cyclists and calmed character of motorized traffic. The area intersects several hiking trails connecting the Hlinky street and Bauerova street.