This thesis considers Confessional poetry and Black Arts poetry against the backdrop of the political and social culture of the 1950s that influenced the styles of these two major poetic movements. I examine Sylvia Plath's and Nikki Giovanni's distinct poetic personas and the language they employ in relation to each other as representatives of confessional and Black Arts poetry, two poetic styles often thought to be inherently opposed to each other, one personal and one political. I identify connections between these seemingly different poets and movements through close readings of key poems by Plath and Giovanni that situates them within second-wave feminism and the civil rights movements of the 1960s. I argue that both poets devise an alternate persona language that is especially exaggerated to create defiant personas of resistance as a direct response to the constricting political conditions in the United States at mid-century.

With the age of hypersonic flight imminent just beyond the horizon, researchers are working hard at designing work-arounds for all the major problems as well as the minor quirks associated with it. One such issue, seemingly innocuous but one that could be potentially deadly, is the problem of interference heating due to surface protuberances. Although an ideal design of the external surfaces of a high-speed aircraft dictates complete smoothness to reduce drag, this is not always possible in reality. Control surfaces, sheet joints, cable protection pads etc. generate surface discontinuities of varying geometries, in the form of both protrusions as well as cavities. These discontinuities are most often small in dimension, comparable to the local boundary layer thickness at that location. Such protuberances always experience high rates of heat transfer, and therefore should be appropriately shielded. However, thermal shielding of the protrusions alone is not a full solution to the problem at hand. The interference caused to the boundary layer by the flow causes the generation of local hot spots in the vicinity of the protuberances, which should be properly mapped and adequately addressed. The work presented in this thesis aims at locating and measuring the heat flux values at these hot spots near the protrusions, and possibly formulating empirical correlations to predict the hot spot heat flux for a given set of flow conditions and protrusion geometry. Experimental investigations were conducted on a flat plate model and a cone model, with interchangeable sharp and blunt nose tips, with attached 3D protuberances. Platinum thin-film sensors were placed around the protrusion so that the heat fluxes could be measured in its vicinity and the hottest spot located. These experiments were carried out at five different hypersonic free stream flow conditions generated using two shock tunnels, one of the conventional type, and the other of the free-piston driven type. The geometry of the protrusions, i.e., the height and the deflection angle, was also parametrically varied to study its effect on the hot spot heat flux. The results thus obtained for the flat plate case were compared to existing correlations in the open literature from a similar previous study at a much higher Reynolds number range. Since a mismatch was observed between the results of the current experiments and the existing correlations, a new empirical correlation has been developed to predict the hot spot heat flux, that is valid within the range of flow conditions studied here. A similar attempt was made for the case of the cone model, for which no previous correlations exist in the open literature. However, a global correlation covering the entire range of flow conditions used here could not be formed. A correlation that is valid for just one out of the five flow conditions used here is presented for the cones with sharp and blunt nose tips separately. Schlieren flow visualization was carried out to obtain a better understanding of the shock structures near the protuberances on both models. For most cases, where the protrusion height and deflection angle were large enough to cause flow separation immediately upstream of the protuberance, a separation shock was manifested which deflected some part of the boundary layer above the protuberance, while the rest of the fluid in the boundary layer entered a recirculating region in the separated zone before escaping to the side. Some preliminary computational analysis was conducted which confirmed this qualitatively. However, the quantitative match of surface heat flux between the simulations and experiments were not encouraging. Schlieren visualization revealed that for the flat plate case, the foot of the separation shock was located at a distance of 10.5 to 12 times the protrusion height ahead of it, whereas in the case of the sharp cone, it was at a distance of 9 to 10.5 times the protrusion height. The unsteady nature of the separation shock was also captured and addressed. Some preliminary experiments on boundary layer tripping were also conducted, the results of which have been presented here. From this analysis, it has become evident that a single global correlation cannot be formed which could be used for a wide range of flow conditions to predict the hot spot heat flux in interference interactions. The entire range of conditions that may be encountered during hypersonic flight has to be broken down into sections, and the interference heating pattern should be studied in each of these sections individually. By doing so, a series of different correlations can be formed at the varying flow conditions which will then be available for high-speed aircraft designers.

Lors d’un lancement spatial, le bruit des jets supersoniques chauds, générés par les moteurs-fusées au décollage et en interaction avec le pas de tir, est dommageable pour le lanceur et en particulier sa charge utile. Par conséquent, les acteurs du spatial cherchent à renforcer leur compréhension et leur maîtrise de cette ambiance acoustique, entre autres grâce à des méthodes et outils numériques. Toutefois, ils ne disposent pas d’une approche numérique globale capable de prendre en compte simultanément la génération fidèle du bruit, la propagation acoustique non-linéaire, les effets d’installation complexes et les géométries réalistes, pourtant inhérents aux applications spatiales. Dans cette optique, cette étude consiste à mettre en place et valider une méthodologie de simulation numérique par couplage fort Navier-Stokes − Euler, puis à l’appliquer à des cas réalistes de bruit de jet supersonique. L’objectif est d’affiner les capacités de prévision et de contribuer à la compréhension des mécanismes de génération de bruit dans de tels jets. Le solveur Navier-Stokes repose sur une méthode LES sur maillage non-structuré et le solveur acoustique sur une méthode de Galerkine discontinue d’ordre élevé sur maillage non-structuré. La méthodologie est tout d’abord évaluée sur des cas académiques visant à valider la simulation par couplage fort. Après des calculs préliminaires, la méthodologie est appliquée à la simulation du bruit d’un jet libre supersonique à Mach 3.1. Une méthode de déclenchement géométrique de la turbulence est implémentée sous la forme d’une marche à la paroi de la tuyère. La simulation aboutit à des estimations du bruit très proches des mesures réalisées au banc MARTEL et met en évidence des effets non-linéaires significatifs ainsi qu’un mécanisme singulier de rayonnement des ondes de Mach. Dans une démarche de progression vers des cas toujours plus réalistes, l’ensemble de l’approche numérique est finalement adaptée avec succès à la simulation du bruit d’un jet en présence d’un carneau. À terme, elle pourra être étendue à des configurations multi-jets réactifs, avec injection d’eau, voire à l’échelle 1. / During a space launch, the noise from hot supersonic jets, generated by rocket engines at liftoff and interacting with the launch pad, is harmful to the launcher and in particular its payload. Consequently, space actors are seeking to strengthen their understanding and control of this acoustic environment through numerical methods and tools, among the others. However, they do not dispose of a comprehensive numerical strategy that can simultaneously take into account accurate noise generation, nonlinear acoustic propagation, complex installation effects and realistic geometries, which are inherent to space applications. For this purpose, the present study consists in setting up and validating a numerical simulation methodology using a Navier-Stokes − Euler two-way coupling approach, then applying it to realistic cases of supersonic jet noise in order to improve prediction capabilities and contribute to the understanding of the noise generation mechanisms in such jets. The Navier-Stokes solver is based on an LES method on unstructured mesh and the acoustic solver on a high-order discontinuous Galerkin method on unstructured mesh. The methodology is first assessed on academic cases to validate the use of the two-way coupling. After preliminary computations, the methodology is applied to the simulation of the noise from a supersonic free jet at Mach 3.1. A geometric turbulence tripping method is implemented via a step at the nozzle wall. The computation leads to noise predictions very close to the experimental measurements performed at the MARTEL test bench and highlights significant nonlinear effects as well as a quite particular Mach waves radiation mechanism. Targeting even more realistic cases, the entire numerical approach is finally successfully adapted to the simulation of the noise from a supersonic jet configuration including a flame trench. In the future, it may be extended to configurations with clustered reactive jets, water injection devices or even at full scale.

The aim of this Master´s thesis is use of instrument transformers and sensors on field of industry protection. We will compare current and voltage transformers, current sensor – based on Rogowski coil, voltage sensor – based on voltage divider. By this measure devices, we can monitoring values of analog quantities in medium voltage switchgear. It is impossible to compare, measure and analyze without this measure devices. There is protection terminal REF542plus, which can compile this values. The REF542plus ability are measuring, monitoring, remote control and protection. First, we will discuss about theory of sensors and convential instrument transformers and analysis of analog signal. We will compare analog input channel on sensor´s analog module and transformer´s analog module. There are few differences between type of analog modules. For analog signal analysis are important frequency filters and Analog/ Digital Convertor (sigma-delta). We will describe functions and options of REF542plus. In practical part of this project, we will test protection functions of protection terminal. First, protection terminal will be connected to sensors. Second protection terminal will be connected to transformers. For testing we chose Earth-fault directional protection and differential protection. We will make only secondary tests. That´s mean, input analog quantities to REF542plus will be simulated by tester. In all we will verify quality of protection. We will focus on lower settings of protection and we will inject protection by low current. Objectives are testing of trip characteristics and measuring of trip time.