Spelling suggestions: "subject:"tube electroforming"" "subject:"tube hydroformylation""
1 |
Hydroforming of tubular materials at various temperaturesAue-u-lan, Yingyot 05 January 2007 (has links)
No description available.
|
2 |
Design and manufacture od a tube hydroforming testing machineWang, Chih-Yu 03 September 2003 (has links)
The objective of this study is to design and manufacture a tube hydroforming test machine with axial feeding, which includes a forming apparatus¡Bhydraulic system and control system. Using feedback control and fuzzy control criterion to conduct T-Shape hydraulic bulging experiments. Using annealed AA6063-T5 aluminum alloy tubes, experiments are carried out with different working path and different feeding distance, analyze the influences of these parameters on the formability of the tubes.
|
3 |
Formability and hydroforming of anisotropic aluminum tubesKorkolis, Ioannis 19 October 2009 (has links)
The automotive industry is required to meet improved fuel efficiency standards
and stricter emission controls. Aluminum tube hydroforming is particularly well suited in
meeting the goals of lighter, more fuel-efficient and less polluting cars. Its wider use in
industry is hindered however by the reduced ductility and more complex constitutive
behavior of aluminum in comparison to the steels that it is meant to replace. This study
aims to address these issues by improving the understanding of the limitations of the
process as applied to aluminum alloys.
A series of hydroforming experiments were conducted in a custom testing facility,
designed and constructed for the purposes of this project. At the same time, several levels
of modeling of the process, of increasing complexity, were developed. A comparison of
these models to the experiments revealed a serious deficiency in predicting burst, which
was found experimentally to be one of the main limiting factors of the process. This
discrepancy between theory and experiment was linked to the adoption of the von Mises
yield function for the material at hand. This prompted a separate study, combining experiments and analysis, to calibrate alternative, non-quadratic anisotropic yield
functions and assess their performance in predicting burst. The experiments involved
testing tubes under combined internal pressure and axial load to failure using various
proportional and non-proportional loading paths (free inflation). A number of state of the
art yield functions were then implemented in numerical models of these experiments and
calibrated to reproduce the induced strain paths and failure strains.
The constitutive models were subsequently employed in the finite element models
of the hydroforming experiments. The results demonstrate that localized wall thinning in
the presence of contact, as it occurs in hydroforming as well as other sheet metal forming
problems, is a fully 3D process requiring appropriate modeling with solid elements. This
success also required the use of non-quadratic yield functions in the constitutive
modeling, although the anisotropy present did not play as profound a role as it did in the
simulation of the free inflation experiments. In addition, corresponding shell element
calculations were deficient in capturing this type of localization that precipitates failure,
irrespective of the sophistication of the constitutive model adopted. This finding
contradicts current practice in modeling of sheet metal forming, where the thin-walled
assumption is customarily adopted. / text
|
4 |
Modeling and analysis of dual hydroforming processJain, Nishant 30 September 2004 (has links)
The tube hydroforming process has gained increasing attention in recent years. Coordination of the internal pressurization and axial feeding curves is critical in the tube hydroforming process to generate successful parts without fracture or wrinkling failure. The stress state at a given time and location varies with the process history and the design and control of the load paths. A new process parameter, counter-pressure, is introduced to achieve a favorable tri-axial stress state during the deformation process. The new process is referred to as dual hydroforming. The benefits offered by dual hydroforming will be characterized based upon the amount of wall thinning, plastic instability limit and final bulged configuration. An analytical model is developed to analyze the stress and strain state in the part (tube) during the dual hydroforming process. The stress-strain condition analyzed will be used to evaluate and compare thinning for tube hydroforming and dual hydroforming. The effect of applying counter-pressure on the plastic instability of thin-walled tubes with only internal pressure and combination of internal pressure and independent axial loading is considered. Finite element analysis is used to quantify the merits of dual hydroforming in terms of final bulged configuration. A parametric study has been conducted to investigate the effectiveness of dual hydroforming based on the various material properties and process conditions. Dual hydroforming results in different stress and strain states compared to tube hydroforming. The counter-pressure enabled favorable tri-axial stress state during deformation that resulted in different thickness and percentage thinning. Finite element analysis showed that for a particular amount of wall thinning there is an increase of around 8% in bulge height for dual hydroforming. Dual hydroforming delays the onset of plastic instability. This increase in the value of effective strain to failure results in an increase of around 12% in bulge height for dual hydroforming as shown by finite element simulations. Results of this study indicate that dual hydroforming can increase expansion i.e. more difficult parts can be designed and manufactured. Also, for a given part geometry, higher strength and less formable materials can be used.
|
5 |
Manufacturing of three-way pipe fitting hydroforming machineLin, Zih-Cyuan 06 September 2005 (has links)
The objective of this study is design and manufacture a tube hydroforming machine with counter feeding and axial feeding, which includes a forming apparatus, hydraulic system and control system. Using computer program to execute the loading path and correct by sensors. To test the function of the machine, carry out the experiments of T,Y-shape hydraulic bulging with annealed AA6063-T5 and 6011A aluminum, which by different working path, and using the experiments to analyze the influences of these parameters on the formability of the tubes.
|
6 |
Analysis of Hydraulic Bulge Forming of TubesHuang, Jian-Cheng 05 September 2001 (has links)
A mathematical model considering ellipsoidal surface for the forming tube is proposed in this work to examine the plastic deformation behavior of a thin-walled tube during tube bulge hydroforming process in an open die. In the formulation of this mathematical model, nonuniform thinning in the free bulged region and sticking and sliding friction modes between the tube and die are considered. In the sticking friction mode, the elements in contact with the die do not move or slide after contact with the die. Whereas, in the sliding friction mode, the elements in contact with the die will continue to deform plastically in the subsequent forming process. The relationship between the internal pressure and the bulge height of the tube is examined. The effects of various forming parameters such as the die entry radius, the initial thickness, the length/diameter ratio, material property, etc., upon the forming pressure and the thickness distribution of products were discussed systematically.
|
7 |
Modeling and analysis of dual hydroforming processJain, Nishant 30 September 2004 (has links)
The tube hydroforming process has gained increasing attention in recent years. Coordination of the internal pressurization and axial feeding curves is critical in the tube hydroforming process to generate successful parts without fracture or wrinkling failure. The stress state at a given time and location varies with the process history and the design and control of the load paths. A new process parameter, counter-pressure, is introduced to achieve a favorable tri-axial stress state during the deformation process. The new process is referred to as dual hydroforming. The benefits offered by dual hydroforming will be characterized based upon the amount of wall thinning, plastic instability limit and final bulged configuration. An analytical model is developed to analyze the stress and strain state in the part (tube) during the dual hydroforming process. The stress-strain condition analyzed will be used to evaluate and compare thinning for tube hydroforming and dual hydroforming. The effect of applying counter-pressure on the plastic instability of thin-walled tubes with only internal pressure and combination of internal pressure and independent axial loading is considered. Finite element analysis is used to quantify the merits of dual hydroforming in terms of final bulged configuration. A parametric study has been conducted to investigate the effectiveness of dual hydroforming based on the various material properties and process conditions. Dual hydroforming results in different stress and strain states compared to tube hydroforming. The counter-pressure enabled favorable tri-axial stress state during deformation that resulted in different thickness and percentage thinning. Finite element analysis showed that for a particular amount of wall thinning there is an increase of around 8% in bulge height for dual hydroforming. Dual hydroforming delays the onset of plastic instability. This increase in the value of effective strain to failure results in an increase of around 12% in bulge height for dual hydroforming as shown by finite element simulations. Results of this study indicate that dual hydroforming can increase expansion i.e. more difficult parts can be designed and manufactured. Also, for a given part geometry, higher strength and less formable materials can be used.
|
8 |
Modelagem experimental e controle do processo de hidroconformação de tubos. / Experimental modeling and control of tube hydroforming process.Ponce, Aline Szabo 07 July 2006 (has links)
O propósito deste trabalho é a modelagem experimental e estudo do controle do processo de hidroconformação de tubos. Assim, o trabalho visa o projeto e a construção de um dispositivo servo-controlado de hidroconformação de tubos com um sistema de controle digital. O trabalho compreende o projeto e a construção de um dispositivo a ser acoplado em uma prensa hidráulica, a instrumentação dos equipamentos usados e a implantação do sistema de controle automático do processo através de um computador PC e de placas de interface A/D e D/A. Os aplicativos de controle foram desenvolvidos em linguagem de alto nível no sistema operacional Windows. No projeto do aplicativo, inicialmente foram realizadas rotinas para testes do sistema em malha aberta. As demais rotinas são aquelas associadas às funções matemáticas do modelo fenomenológico do sistema de hidroconformação, aquelas destinadas ao controlador de malha fechada. O tipo de estratégia de controle a ser utilizada foi definida no decorrer do projeto e foi baseada em um modelo de processo não linear, linearizado em torno de cada ponto de operação. Para fins de obtenção do modelo nominal para o controlador, os atuadores e sensores tiveram suas dinâmicas desprezadas face a dinâmica do processo e suas curvas de processo foram levantadas experimentalmente. / This works aims is the experimental modeling of a tube hydroforming (THF) T" branch, and de THF process automatic control study. Thus, the design and the construction of a servo-controlled hydraulic device for THF, with a automatic digital control system, is embedded in our objectives. Design and construction of device to append on a hydraulic press, implantation of the measurement equipment and implementation of the control system algorithms through a PC with I/O interface boards is necessary. Control algorithms were developed in Hi-level language for windows operating system. The application design was based on experimental initial tests performed with no feed-backing controlling mode. Routes related to phenomenological mathematical model of the THF process were validate against the literature database, and were devoted to the feed-backing controller mode. Control strategy to employ in final application was defined during the process calibration, based on the non-linear characteristics of the T" branch THF. To obtain the final load path model sensors and cylinders had their dynamics neglected because the THF dynamic is very much higher, and had their behavior curves experimentally raised.
|
9 |
Study on die surface design and loading paths for T-shape tube hydroforming with different diameters in the outletsKang, Nai-shin 08 September 2010 (has links)
Die surface shape may improve the flow of materials, reduce stress concentration of the products, and decrease the processing load to extend the life of die. The objective of this paper is to show that how to design the die surface shape of T-shape protrusion hydroforming with different diameters. A finite element code DEFORM 3D is used to simulate the process of THF, including adaptive simulation to predict the internal pressurization in the tube, and utilize flow net distribution to predict the axial feeding stroke and counter punch (CP) movement. After the amendment to the loading path, the flowability and appearance of the product quality will achieve the best results.
Experiments of T-shape warm hydroforming of magnesium alloy AZ61 tubes are. The forming temperature is set as 250¢J. The simulated loading paths are used. From the comparisons of product shape, thickness distribution between analytical and experimental values, the validity of this analytical model is verified..
Keywords: Tube hydroforming, Finite element simulation, Die surface design.
|
10 |
Adaptive simulation for Tee-shape tube hydroforming processesWu, Hung-Chen 03 September 2003 (has links)
The tube hydroforming (THF) technology has been widely used in manufacturing the lightweight and high strength components. The success of THF is largely dependent on the selection of the loading paths: internal pressure vs. time and axial feeding vs. time. The Finite element method is used to simulate the forming result of different loading paths and reduce the cost of die-testing. T-shape tube hydroforming is investigated adaptive simulation by combining FEM code LS-DYNA with fuzzy logic controller subroutine is proposed. During the simulation process, subroutines can adjust the loading paths according to the values of the minimum tube thickness and its variance. Then, the purpose of better thickness distribution of the formed tube at the side branch is achieved. Comparing with other linear loading paths, this adaptive control method got better results. In experiments, the validity of LS-DYNA applied in THF process is verified and the experimental results by adaptive simulation are better than those by the linear loading paths.
|
Page generated in 0.0619 seconds