The Large Eddy Simulation approach is employed to predict the flow physics and heat transfer characteristics of a film-cooling problem that is formed from the interaction of a coolant jet with a hot mainstream flow. The film-cooling technique is used to protect turbine blades from thermal failure, allowing the gas inlet temperature to be increased beyond the failure temperature of the turbine blade material in order to enhance the efficiency of gas turbine engines. A coolant fluid is injected into the hot mainstream through several rows of injection holes placed on the surface of a gas turbine blade in order to form a protective coolant film layer on the blade surface. However, due to the complex, unsteady and three-dimensional interactions between the coolant and the hot gases, it is difficult to achieve the desired cooling performance. Understanding of this complex flow and heat transfer process will be helpful in designing more efficiently cooled rotor blades. A comprehensive numerical investigation of a rotating film-cooling performance under different conditions is conducted in this thesis, including film-cooling on a flat surface and film-cooling on a rotating gas turbine blade. The flow-governing equations are discretised based on the finite-volumes method and then solved iteratively using the well-known SIMPLE and PISO algorithms. An in-house FORTRAN code has been developed to investigate the flat plate film-cooling configuration, while the gas turbine blade geometry has been simulated using the STAR-CCM+ CFD commercial code. The first goal of the present thesis is to investigate the physics of the flow and heat transfer, which occurs during film-cooling from a standard film hole configuration. Film-cooling performance is analysed by looking at the distribution of flow and thermal fields downstream of the film holes. The predicted mean velocity profiles and spanwise-averaged film-cooling effectiveness are compared with experimental data in order to validate the reliability of the LES technique. Comparison of adiabatic film-cooling effectiveness with experiments shows excellent agreement for the local and spanwise-averaged film-cooling effectiveness, confirming the correct prediction of the film-cooling behaviour. The film coverage and film-cooling effectiveness distributions are presented along with discussions of the influence of blowing ratio and rotation number. Overall, it was found that both rotation number and blowing ratio play significant roles in determining the film-cooling effectiveness distributions. The second goal is to investigate the impact of innovative anti-vortex holes on the film-cooling performance. The anti-vortex hole design counteracts the detrimental kidney vorticity associated with the main hole, allowing coolant to remain attached to the blade surface. Thus, the new design significantly improves the film-cooling performance compared to the standard hole arrangement, particularly at high blowing ratios. The anti-vortex hole technique is unique in that it requires only readily machinable round holes, unlike shaped film-cooling holes and other advanced concepts. The effects of blowing ratio and the positions of the anti-vortex side holes on the physics of the hot mainstream-coolant interaction in a film-cooled turbine blade are also investigated. The results also indicate that the side holes of the anti-vortex design promote the interaction between the vortical structures; therefore, the film coverage contours reveal an improvement in the lateral spreading of the coolant jet.

Simulation of crack growth in the internal cooling system of a blade in a Siemens gas turbine has been studied by inserting and propagating cracks at appropriate locations. The softwares used are ABAQUS and FRANC3D, where the latter supports finite element meshing of a crack and calculation of the stress intensities along the crack front based on the results from an external finite element program. The blade is subjected to thermo-mechanical fatigue and the cracks are grown subjected to in-phase loading conditions.   The material of the blade is STAL15SX, a nickel-base single-crystal superalloy. The <001> crystalline direction is aligned with the loading direction of the blade, while the secondary crystalline directions are varied to examine how it affects the thermo-mechanical crack propagation fatigue life of the blade.   The finite element model is set up using a submodeling technique to reduce the computational time for the simulations. Investigations to validate the submodeling technique are conducted.   From the work it can be concluded that a crack located at a critical location in the cooling lattice reach above the crack propagation target life. Cracks located at noncritical locations have crack propagation lives of a factor 5.2 times the life of the critical crack.

This thesis focuses on the study of flow and heat transfer in porous media in both laminar and turbulent flow regimes, by using Volume Averaged Reynolds Navier Stokes (VARNS) approach. The main concern is to investigate the possibility of using porous media for the gas turbine blade cooling. Very recently, using this technique in blade cooling, particularly with internal cooling, has motivated many researchers due to an effective enhancement in the blade cooling. In this study turbulence is represented by using the Launder-Sharma low-Reynolds-number k-Îμ turbulence model, which is modified via proposals by Nakayama and Kuwahara (2008) and Pedras and de Lemos (2001) for extra source terms in the turbulent transport equations to account for the porous structure, which is treated as rigid and isotropic. Due to the changing of the effective porosity as the clear fluid region is approached, the porosity and additional source term in the macroscopic Reynolds averaged Navier-Stokes equations are relaxed across a thin transitional layer at the edges of the porous media. This is achieved by utilizing exponential damping relations to consider these changes. The Local Thermal Equilibrium (LTE) (one-energy equation) model is used for the thermal analysis in porous media. In order to investigate the validity of the extended model, laminar and turbulent flow in different cases, fully developed and developing flows, have been considered. For laminar flows, fully developed plane channel flows with one and two porous layers, a channel with a single porous block and partially filled porous channel flows have been examined for the purpose of validating the extra drag terms in the momentum equations. For the validation purpose for turbulent flows in porous media, the extended model has been tested in homogeneous porous media, turbulent porous channel flows, turbulent solid/porous rib channel flows, and repeated turbulent porous baffled channel flows. Results of all laminar cases show excellent qualitative agreements with the available numerical calculations and experimental data. Results of all turbulent cases show that the extended model returns generally satisfactory accuracy through the comparisons with the available data, except for some predictive weaknesses in regions of either impingement or adverse pressure gradients, both of which are largely due the underlying eddy-viscosity model formulation employed. Thus, from all results, it can be confirmed that the extended model is promising for engineering applications.

No description available.

Gas turbines have become an intricate part of today's society. Besides powering practically all 200,000+ passenger aircraft in use today, they are also a predominate form of power generation when coupled with a generator. The fact that they are highly efficient, and capable of large power to weight ratios, makes gas turbines an ideal solution for many power requirement issues faced today. Designers have even been able to develop small, micro-turbines capable of producing efficient portable power. Part of the turbine's success is the fact that their efficiency levels have continuously risen since their introduction in the early 1800's. Along with improvements in our understanding and designs of the aerodynamic components of the turbine, as well as improvements in the areas of material design and combustion control, advances in component cooling techniques have predominantly contributed to this success. This is the result of a simple thermodynamic concept; as the turbine inlet temperature is increased, the overall efficiency of the machine increases as well. Designers have exploited this fact to the extent that modern gas turbines produce rotor inlet temperatures beyond the melting point of the sophisticated materials used within them. This has only been possible through the use of sophisticated cooling techniques, particularly in the 1st stage vanes and blades. Some of the cooling techniques employed today have been internal cooling channels enhanced with various features, film and showerhead cooling, as well as internal impingement cooling scenarios. Impingement cooling has proven to be one of the most capable heat removal processes, and the combination of this cooling feature with that of channel flow, as is done in impingement channel cooling, creates a scenario that has understandably received a great deal of attention in recent years. This study has investigated several of the unpublished characteristics of these impingement channels, including the channel height effects on the performance of the channel side walls, effects of bulk temperature increase on heat transfer coefficients, circumferential heat variation effects, and effects on the uniformity of the heat transfer distribution. The main objectives of this dissertation are to explore the various previously unstudied characteristics of impingement channels, in order to sufficiently predict their performance in a wide range of applications. The potential exists, therefore, for a designer to develop a blade with cooling characteristics specifically tailored to the expected component thermal loads. Temperature sensitive paint (TSP) is one of several non-intrusive optical temperature measurements techniques that have gained a significant amount of popularity in the last decade. By employing the use of TSP, we have the ability to provide very accurate (less than 1 degree Celsius uncertainty), high resolution full-field temperature measurements. This has allowed us to investigate the local heat transfer characteristics of the various channel surfaces under a variety of steady state testing conditions. The comparison of thermal performance and uniformity for each impingement channel configuration then highlights the benefits and disadvantages of various configurations. Through these investigations, it has been shown that the channel side walls provide heat transfer coefficients comparable to those found on the target surface, especially at small impingement heights. Although the side walls suffer from highly non-uniform performance near the start of the channel, the profiles become very uniform as the cross flow develops and becomes a dominating contributor to the heat transfer coefficient. Increases in channel height result in increased non-uniformity in the streamwise direction and decreased heat transfer levels. Bulk temperature increases have also been shown to be an important consideration when investigating surfaces dominated by cross flow heat transfer effects, as enhancements up to 80% in some areas may be computed. Considerations of these bulk temperature changes also allow the determination of the point at which the flow transitions from an impingement dominated regime to one that is dominated by cross flow effects. Finally, circumferential heat variations have proven to have negligible effects on the calculated heat transfer coefficient, with the observed differences in heat transfer coefficient being contributed to the unaccounted variations in channel bulk temperature.

No description available.

No description available.

No description available.

No description available.

Detached Eddy Simulations (DES) is a hybrid URANS-LES technique that was proposed to obtain computationally feasible solutions of high Reynolds number flows undergoing massive separation with reliable accuracy. Since its inception, DES has been applied to a wide variety of flow fields, but mostly limited to unbounded external aerodynamic flows. This is the first study to apply and validate DES to predict the internal flow and heat transfer in non-canonical flows of industrial relevance. The prediction capabilities of DES in capturing the effects of Coriolis forces, which are induced by rotation, and centrifugal buoyancy forces, which are induced by thermal gradients, are also authenticated. The accurate prediction of turbulent flows is sensitive to the level of turbulence predicted by the turbulence scheme. By treating the regions of interest in LES mode, DES allows the unsteadiness in these regions to develop and hence predicts the turbulence levels accurately. Additionally, this permits DES to capture the effects of system rotation and buoyancy. Computations on a rotating system (a sudden expansion duct) and a system subjected to thermal gradients (cavity with a heated wall) validate the prediction capability of DES. The application of DES is further extended to a non-canonical, internal flow which is of relevance in internal cooling of gas turbine blades. Computations of the fully developed flow and heat transfer shows that DES surpasses several shortcomings of the RANS model on which it is based. DES accurately predicts the primary and secondary flow features, the turbulence characteristics and the heat transfer in stationary ducts and in rotating ducts, where the effects of Coriolis forces and centrifugal buoyancy forces are dominant. DES computations are carried out at a computational cost that is almost an order of magnitude less than the LES with little compromise on the accuracy. However, the capabilities of DES in predicting the transition to turbulence are inadequate, as highlighted by the flow features and the heat transfer in the developing region of the duct. But once the flow becomes fully turbulent, DES predicts the flow physics and shows good quantitative agreement with the experiments and LES. / Ph. D.