Workshop "Netz- und Service-Infrastrukturen" Das Inter-Asterisk eXchange (IAX)-Protokoll ermöglicht eine unproblematische Kommunikation zwischen IAX-fähigen VoIP-Systemen. In der Präsentation zu dem Vortrag werden das Protokoll vorgestellt und die Vorteile von IAX skizziert.

Based on reactions with two flavanones, three flavonols, and five flavones the regioselectivities of twelve human UDP-glucuronosyltransferase (UGT) isozymes were elucidated. The various flavonoid glucuronides were differentiated based on LC-MS/MS fragmentation patterns of [Co(II)(flavonoid – H)(4,7-diphenyl-1,10-phenanthroline)2]+ complexes generated upon post-column complexation. Glucuronide distributions were evaluated to allow a systematic assessment of the regioselectivity of each isozyme. The various UGT enzymes, including eight UGT1A and four UGT2B, displayed a remarkable range of selectivities, both in terms of the positions of glucuronidation and relative reactivity with flavanones, flavonols and flavones. The UGT1A enzyme selectivities are affected by the presence of a hydroxyl group at the 3, 6, 4’, or 3’ positions as well as by the presence of a methoxy at the 3’ position. The UGT2B enzymes show poor to no reactivity with the flavonols or flavones. This result implies that the greater planarity of the flavonols and flavones compared to structure of flavanones inhibits interaction with the UGT2 enzymes. For baicalein and scutellarein, three of the UGT1A isozymes (1A8, 1A9, and 1A10) resulted in the formation of 6-O glucuronides, enabling the fragmentation rules for the metal complexation/MS/MS strategy to be expanded. / text

ITC/USA 2014 Conference Proceedings / The Fiftieth Annual International Telemetering Conference and Technical Exhibition / October 20-23, 2014 / Town and Country Resort & Convention Center, San Diego, CA / Network loads close to Ethernet wire speed and latency sensitive data in a Flight Test Instrumentation (FTI) system, represent challenging requirements for FTI network equipment. Loss of data due to network congestion, overflow on the end nodes, as well as packet latency above a few hundred microseconds, can be critical during a flight test. To avoid these problems, several advanced packet filtering and network optimization functions are required in order to achieve best possible performance and thus avoid loss of data. This paper gives insight into how to properly engineer an Ethernet based FTI network and how to use advanced Ethernet switch techniques such as Quality of Service (QoS) and rate shaping.

ITC/USA 2013 Conference Proceedings / The Forty-Ninth Annual International Telemetering Conference and Technical Exhibition / October 21-24, 2013 / Bally's Hotel & Convention Center, Las Vegas, NV / During a recent U.S. Army Yuma Proving Ground (YPG) ground test, an unexpected change in test location resulted in the implementation of an innovative ad hoc network solution to complete the planned test matrix. The original plan was to use an aircraft ground test facility; however, safety requirements resulted in the aircraft being placed 50 meters away from the facility. This distance was too great to use the existing connections; consequently, data collection and analysis were adversely affected until this time expedient solution was implemented.

Video surveillance today can look very different depending on the objective and on the location where it is used. Some applications need a high image resolution and frame rate to carefully analyze the vision of a camera, while other applications could use a poorer resolution and a lower frame rate to achieve it's goals. The communication between a camera and an observer depends much on the distance between them and on the contents. If the observer is far away the information will reach the observer with delay, and if the medium carrying the information is unreliable the observer has to have this in mind. Lost information might not be acceptable for some applications, and some applications might not need it's information instantly. In this master thesis, IP network communication for an automatic tolling station has been simulated where several video streams from different sources have to be synchronized. The quality of the images and the frame rate are both very important in these types of surveillance, where simultaneously exposed images are processed together. The report includes short descriptions of some networking protocols, and descriptions of two implementations based on the protocols. The implementations were done in C++ using the basic socket API to evaluate the network communication. Two communication methods were used in the implementations, where the idea was to push or to poll images. To simulate the tolling station and create a network with several nodes a number of Raspberry Pis were used to execute the implementations. The report also includes a discussion about how and which video/image compression algorithms the system might benefit of. The results of the network communication evaluation shows that the communication should be done using a pushing implementation rather than a polling implementation. A polling method is needed when the transportation medium is unreliable, but the network components were able to handle the amount of simultaneous sent information very well without control logic in the application.

This thesis examines the current implementations for the distribution of real-time GNSS data over IP networks such as the public Internet, focusing on two essential components of the system, data format and transport protocol. The provision of a suitable data format will allow users to take full advantage of the real-time GNSS data distribution system. Types of GNSS supported, message sizes, data rates, data precision levels, hardware and software support and possible future developments are investigated. An analysis is carried out on commonly known GNSS data formats, highlighting the most suitable standard for each evaluation criterion. A similar investigation is carried out on the transport protocols. An analysis is conducted on various design aspects of NTRIP and RT-IGS protocols, covering factors such as data latency, integrity, firewalls and proxy server compatibility and scalability. The analysis also covers the design aspects of the new draft Version 2 of NTRIP. The latter parts of this thesis report on the experiment results aimed at providing assessment of the current level of implementation of NTRIP. Data latency and integrity using NTRIP over the Internet are examined. Their impacts on users applications as the quality of real-time kinematic positioning is assessed. The results show that the performance of the system satisfies the rigorous requirement of the end-user application. The draft version of the new NTRIP indicates that UDP will be also supported. A similar investigation is carried out, providing the first experiment results on the new option. Tests using similar metrics, data latency and integrity, were carried out to verify the inherent differences between TCP and UDP. It was ascertained that, in most cases, UDP does offer improvement in terms of reduced latency over TCP. However this improvement is not significant enough to affect the performance of users applications tested. Compatibility tests were also carried out and the test results show that the new option experiences some compatibility issues with firewalls and wireless networks.

<p>The user growth in Internet services for the past years has caused a need to re-think methods for user authentication, authorization and accounting for network providers. To deal with this growing demand for Internet services, the underlying user authentication systems have to be able to, among other things, handle load spikes. This can be achieved by using loadbalancing, and there are both adaptive and non-adaptive methods of loadbalancing.</p><p>This case study compares adaptive and non-adaptive loadbalancing for user authentication in terms of average throughput. To do this we set up a lab where we test two different load-balancing methods; a non-adaptive and a adaptive.</p><p>The non-adaptive load balancing method is simple, only using a pool of servers to direct the load to in a round-robin way, whereas the adaptive load balancing method tries to direct the load using a calculation of the previous requests.</p>

The user growth in Internet services for the past years has caused a need to re-think methods for user authentication, authorization and accounting for network providers. To deal with this growing demand for Internet services, the underlying user authentication systems have to be able to, among other things, handle load spikes. This can be achieved by using loadbalancing, and there are both adaptive and non-adaptive methods of loadbalancing. This case study compares adaptive and non-adaptive loadbalancing for user authentication in terms of average throughput. To do this we set up a lab where we test two different load-balancing methods; a non-adaptive and a adaptive. The non-adaptive load balancing method is simple, only using a pool of servers to direct the load to in a round-robin way, whereas the adaptive load balancing method tries to direct the load using a calculation of the previous requests.

Distribution of information across IP based networks is today part of our everyday life. IP is the backbone of the Internet and most office networks. We use IP to access web pages, listen to radio, and to create computation clusters. All these examples use bandwidth, and bandwidth is a limited resource. Many applications distribute the same information to multiple receivers, but in many cases the same information is sent to a single receiver at a time, thus multiple copies of the same information is sent, thus consuming bandwidth. What if the information could be broadcasted to all the clients at the same time, similar to a television broadcast. TCP/IP provides some means to do that. For example UDP supports broadcasting; the problem faced when using UDP is that it’s not reliable. There is no guarantee that the information actually reaches the clients. This Bachelor thesis in Computer Science aims to investigate the problems and solutions of how to achieve reliable distribution of fixed size data sets using a non reliable multicast communication channel, like UDP, in a LAN environment. The thesis defines a protocol (Almost Reliable Multicast Protocol – Arm-P) that provides maximum scalability for delivery of versioned data sets that are designed to work in a LAN-environment. A proof-of-concept application is implemented for testing purposes.

The Range Commanders Council has been attempting to standardize Telemetry over IP (TMoIP) for many years now. While the attempt has been valiant, the outcome to date has not been very successful. As a result, many vendors have implemented their own proprietary methods for sending PCM data over IP networks resulting in a lack of interoperability. As telemetry ground stations are finally making the move toward network centric architectures, it is worth considering the lessons learned over the previous 10 years of designing, installing, troubleshooting and optimizing telemetry data distribution over IP networks. This paper describes a proposed revision to IRIG 218 based on these real life experiences. It discusses the critical decisions and architectural decisions to be made and some of the pitfalls to be avoid.