Les composites de type Cf/C sont utilisés en tant que pièces structurales dans les propulseurs spatiaux du fait de leurs excellentes propriétés mécaniques dans le domaine des très hautes températures. Néanmoins, l’atmosphère oxydante et corrosive créée lors du décollage des lanceurs et les hauts flux gazeux dégradent ces matériaux. Afin d’améliorer les performances de ces matériaux vis-à-vis de l’oxydation/corrosion, une protection composée de céramiques ultra-réfractaires (dites UHTC) peut être appliquée. Pour une efficacité de protection optimale, des phases UHTC ont été introduites en tant que constituants de la matrice. Dans ces travaux de thèse, la matrice a été réalisée par l’intermédiaire d’un procédé d’élaboration en phase liquide combinant : (i) l’introduction de poudres et (ii) la densification par infiltration réactive d’un métal fondu. La composition de la matrice appartient au système (B;C;Si;Zr). La caractérisation des matériaux après élaboration a permis de comprendre les mécanismes d’infiltration et les réactions permettant de mieux contrôler la composition chimique et la répartition des phases. Des essais sous torche oxyacétylénique ont été utilisés pour se placer dans des conditions proches de l’application visée. La caractérisation post-test des matériaux a permis d’évaluer l’efficacité de la protection dans le cas d’une utilisation unique et également d’une possible réutilisation. Les résultats en oxydation/corrosion ont permis de classer les matériaux en fonction de leur efficacité de protection. / Since many decades, Carbon/Carbon composites are used as structural parts in rocket engines due to their excellent thermomechanical properties. However, under highly oxidizing/corrosive atmosphere and high gas flow rates, carbon suffers from severe oxidation. To improve oxidation resistance of these composites, Ultra High Temperature Ceramics (UHTC) can be used as a protection. To protect the whole composite, the introduction of UHTC as a matrix has been done using a liquid phase process combining: (i) slurry infiltration process and (ii) reactive melt infiltration. Matrix constituents belong to the (B;C;Si;Zr) system. Material characterisation allowed a better understanding of the infiltration mechanisms and of the phase distribution and composition in respect to the processing conditions. To select the best composition, oxyacetylene torch testing has been done to recreate spacecraft launch environmental conditions. Post-test characterisation has been done to evaluate protection efficiency of each matrix composition for single use and possible reuse. Finally, advantages and drawbacks assessment of each composition allowed to highlight the most protective composition and phase distribution.

<p dir="ltr">In this dissertation, we investigate the potential of two-dimensional (2D) transition metal carbides, known as MXenes, as precursor materials for the development of ultra-high temperature ceramics (UHTCs), with a focus on Ti₃C₂T_<em>x</em> MXene. MXenes are distinguished by their unique combination of 2D structure, high surface area, and chemically active basal planes, making them ideal candidates for a wide range of high-performance applications. This study focuses on the phase transformation, grain growth, surface texturing, and electrocatalytic behavior of Ti₃C₂T_<em>x</em> MXene films when subjected to high-temperature annealing, along with their role as sintering aids in UHTCs.</p><p dir="ltr">We present the transformation of 2D Ti₃C₂T_<em>x</em> flakes into ordered vacancy carbides of three-dimensional (3D) TiC_y phases at temperatures above 1000°C. Using X-ray diffraction and ex-situ annealing (up to 2000°C in a tube furnace and spark plasma sintering), we investigate the resulting nano-lamellar and micron-sized cubic grain morphologies. Single-flake Ti₃C₂T_<em>x</em> films retain a lamellar morphology after annealing, while multi-layer clay-like MXene transforms into irregular cubic grains.</p><p dir="ltr">In addition to investigating the structural evolution, we examine the influence of cationic intercalation on grain growth and texture. Specifically, Ca²⁺ ions lead to highly templated growth along the (111) crystal plane, significantly altering carbon diffusion and metal atom migration during annealing. We show that this preferential growth influences properties with hydrogen evolution reactions (HER) as an example functionality. We observe that with Ca²⁺-intercalated Ti₃C₂T_<em>x</em> films, exhibit an overpotential of 594 mV and a current density of -13 mA/cm² due to increased surface area and dominant texturing.</p><p dir="ltr">Additionally, we investigate the use of MXenes in self-assembly with ceramic materials such as ZrB₂, facilitated by optimizing zeta potentials. MXenes, with their functionalized hydrophilic surfaces and negative zeta potentials, serve as sintering aids and reinforcements in UHTC composites. The introduction of Ti₃C₂T_<em>x</em> to ZrB₂ enables improved sinterability, achieving 96% relative density compared to 89% for pure ZrB₂. Furthermore, the addition of MXenes leads to a core-shell microstructure with (Zr,Ti)B₂ solid-solution interfaces, enhanced mechanical properties such as a 36% increase in hardness, and reductions in oxygen content. These findings establish MXenes as promising materials for the development of advanced UHTCs, suitable for extreme environments.</p><p dir="ltr">Through a combination of experimental techniques, and theoretical estimations, and advanced characterizations, this dissertation provides critical insights into the role of MXenes in both phase transformation and mechanical reinforcement, thereby laying the foundation for future studies and opening new avenues for applications of MXene derived carbides and the design of high-performance UHTCs.</p>

This report travels through multiple disciplines to seek innovative and sustainable energy solutions for wastewater treatment plants. The first subject is a report about increased global temperatures and an over-exploitation of natural resources that threatens ecosystems worldwide. The situation is urgent where the current trend is a 2°C increase of global temperatures already in 2040. Furthermore, the energy-land nexus becomes increasingly apparent where the world is going from a dependence on easily accessible fossil resources to renewables limited by land allocation. A direction of the required transition is suggested where all actors of the society must contribute to quickly construct a new carbon-neutral resource and energy system. Wastewater treatment is as required today as it is in the future, but it may move towards a more emphasized role where resource management and energy recovery will be increasingly important. This report is a master’s thesis in energy engineering with an ambition to provide some clues, with a focus on energy, to how wastewater treatment plants can be successfully integrated within the future society. A background check is conducted in the cross section between science, society, politics and wastewater treatment. Above this, a layer of technological insights is applied, from where accessible energy pathways can be identified and evaluated. A not so distant step for wastewater treatment plants would be to absorb surplus renewable electricity and store it in chemical storage mediums, since biogas is already commonly produced and many times also refined to vehicle fuel. Such extra steps could be excellent ways of improving the integration of wastewater treatment plants into the society. New and innovative electric grid-connected energy storage technologies are required when large synchronous electric generators are being replaced by ‘smaller’ wind turbines and solar cells which are intermittent (variable) by nature. A transition of the society requires energy storages, balancing of electric grids, waste-resource utilization, energy efficiency measures etcetera… This interdisciplinary approach aims to identify relevant energy technologies for wastewater treatment plants that could represent decisive steps towards sustainability.