>Magister Scientiae - MSc / In the wide search for advanced materials for next generation lithium-ion batteries, lithium manganese orthosilicate, Li₂MnSiO₄ is increasingly gaining attention as a potential cathode material by virtue of its ability to facilitate the extraction of two lithium ions per formula unit, resulting in a two-electron redox process involving Mn²⁺/Mn³⁺ and Mn³⁺/Mn⁴⁺ redox couples. This property confers on it, a higher theoretical specific capacity of 333 mAhg⁻¹ which is superior to the conventional layered LiCoO₂ at 274 mAhg⁻¹ and the commercially available olivine LiFePO₄ at 170 mAhg⁻¹. Its iron analogue, Li₂FeSiO₄ has only 166 mAhg⁻¹ capacity as the Fe⁴⁺ oxidation state is difficult to access. However, the capacity of Li₂MnSiO₄ is not fully exploited in practical galvanostatic charge-discharge tests due to the instability of the delithiated material which causes excessive polarization during cycling and its low intrinsic electronic conductivity. By reducing the particle size, the electrochemical performance of this material can be enhanced since it increases the surface contact between the electrode and electrolyte and further reduces the diffusion pathway of lithium ions. In this study, a versatile hydrothermal synthetic pathway was employed to produce nanoparticles of Li₂MnSiO₄, by carefully tuning the reaction temperature and the concentration of the metal precursors. The nanostructured cathode material was further coated with a thin film of aluminium oxide in order to modify its structural and electronic properties. The synthesized materials were characterized by microscopic (HRSEM and HRTEM), spectroscopic (FTIR, XRD, SS-NMR, XPS) and electrochemical techniques (CV, SWV and EIS). Microscopic techniques revealed spherical morphologies with particle sizes in the range of 21-90 nm. Elemental distribution maps obtained from HRSEM for the novel cathode material showed an even distribution of elements which will facilitate the removal/insertion of Li-ions and electrons out/into the cathode material. Spectroscopic results (FTIR) revealed the vibration of the Si-Mn-O linkage, ascertaining the complete insertion of Mn ions into the SiO₄⁴⁻ tetrahedra. XRD and ⁷Li MAS NMR studies confirmed a Pmn21 orthorhombic crystal pattern for the pristine Li₂MnSiO₄ and novel Li₂MnSiO₄/Al₂O₃ which is reported to provide the simplest migratory pathway for Li-ions due to the high symmetrical equivalence of all Li sites in the unit cell, thus leading to high electrochemical reversibility and an enhancement in the overall performance of the cathode materials. The divalent state of manganese present in Li₂Mn²⁺SiO₄ was confirmed by XPS surface analysis. Scan rate studies performed on the novel cathode material showed a quasi-reversible electron transfer process. The novel cathode material demonstrated superior electrochemical performance over the pristine material. Charge/discharge capacity values calculated from the cyclic voltammograms of the novel and pristine cathode materials showed a higher charge and discharge capacity of 209 mAh/g and 107 mAh/g for the novel cathode material compared to 159 mAh/g and 68 mAh/g for the pristine material. The diffusion coefficient was one order of magnitude higher for the novel cathode material (3.06 x10⁻⁶ cm2s⁻¹) than that of the pristine material (6.79 x 10⁻⁷ cm2s⁻¹), with a charge transfer resistance of 1389 Ω and time constant (τ) of 1414.4 s rad⁻¹ for the novel cathode material compared to 1549 Ω and 1584.4 s rad-1 for the pristine material. The higher electrochemical performance of the novel Li₂MnSiO₄/All₂O₃ cathode material over the pristine Li₂MnSiO₄ material can be attributed to the alumina nanoparticle surface coating which considerably reduced the structural instability intrinsic to the pristine Li₂MnSiO₄ cathode material and improved the charge transfer kinetics.

Amitraz is a formamide acaricide used predominantly in the control of ectoparasites in livestock and honeybees. Amitraz hydrolysis is rapid and occurs under acidic conditions, exposure to sunlight and biodegradation by microorganisms. The main hydrolysis product of amitraz, 2,4-dimethylaniline, is recalcitrant in the environment and toxic to humans. An electrochemical method for the determination of total amitraz residues and its final breakdown product, 2,4-dimethylaniline, in spent cattle dip, is presented. Cyclic voltammetry at a glassy carbon electrode showed the irreversible oxidation of amitraz and 2,4-dimethylaniline. A limit of detection in the range of 8.5 x 10⁻⁸ M for amitraz and 2 x 10⁻⁸ M for 2,4-dimethylaniline was determined using differential pulse voltammetry. Feasibility studies in which the effect of supporting electrolyte type and pH had on electroanalysis of amitraz and its degradants, showed that pH affects current response as well as the potential at which amitraz and its degradants are oxidised. Britton-Robinson buffer was found to be the most suitable supporting electrolyte for detection of amitraz and its degradants in terms of sensitivity and reproducibility. Studies performed using environmental samples showed that the sensitivity and reproducibility of amitraz and 2,4-dimethylaniline analyses in spent cattle dip were comparable to analyses of amitraz and 2,4-dimethylaniline performed in Britton-Robinson buffer. In addition, the feasibility qf measuring amitraz and 2,4-dimethylaniline in environmental samples was assessed and compared to amitraz and 2,4-dimethylaniline analyses in Britton-Robinson buffer. Amitraz and 2,4-dimethylaniline were readily detectable in milk and honey. Furthermore, it was elucidated that 2,4-dimethylaniline can be metabolised to 3-methylcatechol by Pseudomonas species and the proposed breakdown pathway is presented. The biological degradation of amitraz and subsequent formation of 2,4-dimethylaniline was readily monitored in spent cattle dip. The breakdown of amitraz to 2,4-dimethylaniline and then to 3-MC was monitored using cyclic voltammetry.

The electrochemical investigation of nickel, copper and silver thin films interfaced with yttria stabilized zirconia (YSZ) solid electrolyte was accomplished to determine their response to polarization in dilute oxygen environments at 350 °C and assess their viability for electrochemical promotion of catalysis (EPOC). Polycrystalline YSZ (8 mol % Y2O3-ZrO2) pellets were synthesized in the lab and films deposited onto them using evaporative physical vapor deposition (PVD). The critical thickness of copper, silver and nickel thin films were foundusing in-situ resistance measurements. Following this, 50 and 100 nm copper and nickel films were studied using solid electrolyte cyclic voltammetry (SECV) to determine their response to polarization. Given that silver thin films at such thicknesses are thermally unstable, a film of 800 nm was used in this study. The materials were found to respond to polarization in different ways, forming oxides according to Wagner and Mott-Cabrera oxidation models.

The electrochemical oxidation of CoCl2(PPh3)2 was investigated in a mixture of acetonitrile and pentanol (1:1) at a platinum disk working electrode using Cyclic Voltammetry (CV) and Chronoamperometry. Elemental Analysis and Infrared Spectroscopy were used to characterise the synthesized compounds i.e. CoCl2(PPh3)2 and CoCl(PPh3)3. Cyclic Voltammetry was utilised for the examination of different working electrode materials that could be used for the anodic voltammetric studies of CoCl2 (PPh3)2, to characterise the reactants and products of each electrode reaction, to investigate the chloride binding ability to a CoCl(PPh3)3 complex, and to evaluate the electrocatalytic substitution of chloride by PPh3 from the complex CoCl2(PPh3)2. Use of ferrocene as an internal standard during the anodic studies of CoCl2(PPh3)2 was also evaluated. The number of electron involved in the electrode process, CoII to CoIII from CoCl2(PPh3)2 and diffusion coefficient of ferrocene in a mixture of acetonitrile and pentanol (1:1) were determined using Chronoamperometry. Ultraviolet-Visible (UV-Vis) and 31P Nuclear Magnetic Resonance (31P NMR) spectra were used to assist with the characterisation of the electrode reactions involved during oxidation of CoCl2(PPh3)2. / Dissertation (MSc (Chemistry))--University of Pretoria, 2008. / Chemistry / unrestricted

This work deals with thick-film sensor’s electrodes optimization. The main goal of this work is to find suitable design of the electrodes for the best and reproducible current response of thick-film sensors.

Master’s thesis deals with thick/film sensor’s electrodes optimization. The aim of this work is to determine how the geometric size and shape of the electrodes affect the output current response. Technology and electro-analytical method is described in the theoretical part. The practical part is aimed at thick-films electrodes and sensors optimalization. It is here each optimization TLV electrodes in terms of their impact on the size of the output current response three-electrode electrochemical system using standard electrodes. Similarly, there is a study of the effect size performed on one common electrode free-electrodes sensor. Finally, there are studied various forms of electrode area three-electrode thick-film sensor in terms of their effect on the output current response. Summarized results are described in the final part of the work.

This master thesis deals with supercapacitors based on electrical double layer and proper carbon electrodes for this type of supercapacitors. In theoretical part of work is described theory of supercapacitors, energy storage principles and their properties. In the next part are described carbon materials, their properties and electrochemical methods of measurements that we used. In the experimental part is described preparation of electrodes, results and conclusion.

The diploma thesis deals with researching electrodeposition of silicon in anhydrous solutions. As electrolyte was used EC:DMC (1:1) with (C2H5)4NBF4, LiPF6 and LiClO4. Research was measured by cyclic voltammetry and XRD.

The work deals with n-channel system enabling many sample analysis at sort time from sensor array using electrochemical methods. The 8x12 sensor arrays are formed from 3 electrodes system created on PCB which can be used for heavy metal analysis and toxic substances determination. The control unit switches each 3 electrode sensor to 8 channel precise potentiostat which was designed for electrochemical analysis with current sensitivity below 10 pA. The potentiostat can synchronize with control unit. Developed system is able to measure up to eight single inputs and may be simply converted to measure other nonchemical values. Measured data will be sent to user-friendly application in computer and analyzed or saved consequently.

This work is focused on optimalisation of coposite materials for civil engineering. In the theoretical part of the project is introduction of the composite materials and materials which are used for their production. There are also concerned their properties and possible application areas. In conclusion of theoretical part this project is a summary of the possible use of composite materials. The practical part compares the characteristics of the different types of composites made in terms of conductivity and the rate of corrosion.