A need was identified to test multi–layer vacuum super insulation (MLVSI) used in cryogenic applications for hydrogen storage. The study focuses on the application of commercially available MLVSI to a locally patented liquid hydrogen cryogenic storage system. This led to an investigation of different types of multi–layer vacuum insulation configurations, as well as further research on tank inlet coupling configurations. It includes the manufacturing of a liquid nitrogen testing cryostat to be able to test and evaluate the system performance. The first set of tests was based on the development of an inlet coupling configuration to limit heat transfer through the inner tank inlet, of a double cryogenic tank system in order to reduce gas boil–off. The couplings were manufactured in the form of a bellow to handle cryogenic vacuum levels, while ensuring low heat transfer rates between inner and outer tanks. It was found that various coupling designs can be considered to limit gas boil–off. The second set of tests was conducted on a specific MLVSI configuration to determine its effectiveness to insulate the spherical header surface of a typical hydrogen storage vessel. The installation procedure, to limit heat transfer and boil–off due to edge effects in this configuration was investigated. It was found that insulation–overlap–edge effects will always have an impact on insulation performance when a spherical header of a storage vessel is insulated, due to its specific geometry. A time efficient way to install MLVSI on such a spherical header is presented and evaluated. Further investigations were carried out by combining findings into one single system to determine the performance of an optimised insulated cryogenic system. It was found that copper plate discs installed between the vanes of a bellowed inlet/outlet nozzle is the most promising to limit heat transfer to the cryogenic fluid. / Thesis (M.Ing. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2012.

A need was identified to test multi–layer vacuum super insulation (MLVSI) used in cryogenic applications for hydrogen storage. The study focuses on the application of commercially available MLVSI to a locally patented liquid hydrogen cryogenic storage system. This led to an investigation of different types of multi–layer vacuum insulation configurations, as well as further research on tank inlet coupling configurations. It includes the manufacturing of a liquid nitrogen testing cryostat to be able to test and evaluate the system performance. The first set of tests was based on the development of an inlet coupling configuration to limit heat transfer through the inner tank inlet, of a double cryogenic tank system in order to reduce gas boil–off. The couplings were manufactured in the form of a bellow to handle cryogenic vacuum levels, while ensuring low heat transfer rates between inner and outer tanks. It was found that various coupling designs can be considered to limit gas boil–off. The second set of tests was conducted on a specific MLVSI configuration to determine its effectiveness to insulate the spherical header surface of a typical hydrogen storage vessel. The installation procedure, to limit heat transfer and boil–off due to edge effects in this configuration was investigated. It was found that insulation–overlap–edge effects will always have an impact on insulation performance when a spherical header of a storage vessel is insulated, due to its specific geometry. A time efficient way to install MLVSI on such a spherical header is presented and evaluated. Further investigations were carried out by combining findings into one single system to determine the performance of an optimised insulated cryogenic system. It was found that copper plate discs installed between the vanes of a bellowed inlet/outlet nozzle is the most promising to limit heat transfer to the cryogenic fluid. / Thesis (M.Ing. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2012.

The diploma thesis deals with study of behavior of fibrous organic insulants under greatly reduced pressure (even to vacuum). Development, production and durability of vacuum insulating panels are described in the theoretical part as well as principles of heat transfer. Method for production of core of VIP, created using waste fibers from textile industry and agriculture, is described in the practical part. Verification of behavior during normal and reduced pressure (even to vacuum) was carried out on experimentally made core insulants.

<p>Vacuum insulation panels, VIPs, constitute a new insulation material, 6 to 8 times better than traditional insulation materials, which utilizes the positive influence vacuum has on the thermal properties of certain materials. A VIP is a composite with a flat core enclosed by an envelope preventing the core to fill with gas. The vacuum in the core is vital to reach thermal conductivities down to 0,0035 W/(m K), if the vacuum is lost the panel has reached the end of its service life time. Metal sheets would the preferred material to create an impermeable envelope but would creates a large thermal bridge at the edges of a panel when it folds over the edges of the panel.</p><p>A serpentine edge has been proposed in order to deal with this large thermal bridge. This serpentine edge has been evaluated first as a numeric model in software and then by measuring on a prototype edge element in a hot and cold plate instrument. Measured temperatures were used to validate the numerical model. Results show that a serpentine edge can greatly reduce the thermal bridge if designed correctly.</p><p>Another direction taken in the development of the VIP barrier is to use very thin metal layers, metallization layer or coating, incorporated into multi layered polymer composite film. This creates barrier films with very good barrier properties and only small thermal bridges. The modeling of gas flux through films with more than one coating has only just started. Existing models for flux through multi coated films all assume that flux is only taking place through defects in the coating layers, that all defects are of the same size and that all defects are positioned in square lattices. The model discussed herein use the same assumption of flux through pinholes only but it does take defect sizes and positions into account. Barrier film, from a regular vacuum insulation panel, with double coatings has been evaluated in light microscopy to characterize the defects in each of the coatings. The data found have been fed into the model and the results comply well with reported permeabilities of similar barrier films.</p>

Glass fiber core Vacuum Insulation Panels (VIPs) have thermal performance per unit thickness of about 5-10 times higher than the traditionally used building insulation materials such as mineral wool, XPS, EPS, foam, etc. This advantage of VIP has made it very attractive new option for innovative building designs. Especially in Canada, where some of the areas have long and very cold winters. Confidence in the service life of a building material is necessary before putting a product to market. Extensive research has been conducted on the product development, quality improvement, and field application of VIPs around the world. However, there is lack of consistent and simple prediction method for the long-term thermal performance of VIPs. This paper discussed the process and performance of a field project using glass fiber VIPs to retrofit a commercial building in Yukon, Canada. The thermal performance of the VIPs used in this project was continuously monitored and critically analyzed since the start in 2011. The results have shown satisfactory thermal performance of VIPs for the past 8 years. The findings were also used to validate glass fiber core VIP accelerated aging tests conducted by the National Research Council Canada (Ottawa), and the aging rate of VIPs in a cold and dry climate was determined. The second part of this study investigated the monitored performance results from two sets of simplified accelerated laboratory aging tests, the results were analyzed with the aim to separate the impact of air diffusion from water vapour on the long-term thermal performance of glass fiber VIPs. In addition, this study also investigated the potential application of VIPs in balcony constructions to reduce heat transfer through thermal bridges. Computer modeling exercises, using a benchmarked (EN ISO 10211) three-dimensional transient and steady-state heat transfer simulation tool HEAT3, were carried out on the most optimal (thermal performance) balcony assemblies of wood framed buildings using VIP as insulation. This niche application of VIPs can significantly increase the energy efficiency of building envelopes/skins in extreme climates of Canada and elsewhere in the world. / Graduate / 2021-11-06

According to the Swedish Government's set targets for energy use and environmental quality imposed by the European Union, the total energy per heated unit area in residential and commercial buildings will have to be decreased by 20% in 2020 and 50% by 2050 in relation to the annual consumption of 1995. The building sector should additionally be completely independent of fossil fuels for energy usage, with the increasing sector of renewable energy continuously growing until 2020. In its current state, the number of multistory buildings and single-family houses in Sweden exceeds 4 000 000 units. In order to attain the set goals, renovation of the existing housing stock is a necessity given its current relatively slow turnover. As a result of the Swedish Million Unit Program undertaken during 1965−1974, about 750 000 apartments are currently in need of renovation in order to meet today's building standards. Simultaneously, new buildings are built with energy efficiency in mind. In this study an early stage methodology is developed for building refurbishment that takes advantage of a multi-faceted approach. The methodology comprises of multiple dimensions related to a techno-economic, environmental and building occupancy approach. The work presented herein includes a thorough literature review of decision making tools within the built environment and identifies major research efforts in sustainable refurbishment. The technical aspect of this study deals with the proper identification of high-efficient insulation materials that would serve one of the set purposes of energy efficiency when utilized within building envelopes. Further, results are shown for case studies, in which economic investments in Vacuum Insulation Panels (VIPs) and a coupled heat and moisture transport for predefined configurations of VIPs with supplementary insulation of balcony slabs and wall cross-sections are considered. The developed methodology also examines simulations of the total energy consumption utilizing a set of different insulation materials such as mineral wool and VIPs, for a number of locations in Northern and Southern Europe. The research findings of this study identify several aspects of a new developed tool for decision making, to be used in sustainable renovation and refurbishment. / <p>QC 20120918</p>

Vacuum insulation panels, VIPs, constitute a new insulation material, 6 to 8 times better than traditional insulation materials, which utilizes the positive influence vacuum has on the thermal properties of certain materials. A VIP is a composite with a flat core enclosed by an envelope preventing the core to fill with gas. The vacuum in the core is vital to reach thermal conductivities down to 0,0035 W/(m K), if the vacuum is lost the panel has reached the end of its service life time. Metal sheets would the preferred material to create an impermeable envelope but would creates a large thermal bridge at the edges of a panel when it folds over the edges of the panel. A serpentine edge has been proposed in order to deal with this large thermal bridge. This serpentine edge has been evaluated first as a numeric model in software and then by measuring on a prototype edge element in a hot and cold plate instrument. Measured temperatures were used to validate the numerical model. Results show that a serpentine edge can greatly reduce the thermal bridge if designed correctly. Another direction taken in the development of the VIP barrier is to use very thin metal layers, metallization layer or coating, incorporated into multi layered polymer composite film. This creates barrier films with very good barrier properties and only small thermal bridges. The modeling of gas flux through films with more than one coating has only just started. Existing models for flux through multi coated films all assume that flux is only taking place through defects in the coating layers, that all defects are of the same size and that all defects are positioned in square lattices. The model discussed herein use the same assumption of flux through pinholes only but it does take defect sizes and positions into account. Barrier film, from a regular vacuum insulation panel, with double coatings has been evaluated in light microscopy to characterize the defects in each of the coatings. The data found have been fed into the model and the results comply well with reported permeabilities of similar barrier films. / QC 20101125

Objectives set by the EU means that all buildings after 2020 has to be nearly zero energy buildings. This means that thicker layers of insulation have to be added in the wall construction which makes the wall thicker. It means that the living area will be reduced. Vacuum insulation is a highly effective type of insulation and because of its low thermal conductivity it has the ability to reduce the thickness in wall structures. This project investigates a proposal to apply vacuum insulation in one-storey buildings. In order to achieve the goals of the project, a proposal for a one-storey building was developed. Calculations have been made and the proposal was developed as an alternative to show how to construct a family home containing vacuum insulation. The empirical data was collected through interviews, document analysis and literature studies. The collected data was analyzed together with the theoretical framework that has been developed through literature studies and document analysis. Creating a wall construction containing vacuum insulation as a primary insulation usually means that the wall will be considerably thinner than a wall construction with traditional insulation. This means that living area can be saved. Vacuum insulation has to be protected properly as it is easily punctured where upon it loses the most of its insulation capacity. Vacuum insulation is not common on the Swedish construction market today, this is due to many factors, including its high price. Vacuum insulation is a good problem solver which can be used in bay windows to gain extra space. One can also make use for it in tight spaces. From an economic point of view vacuum insulation offers the greatest advantages in cities where living space is considerably higher than in rural areas. To take part of the work there is no need for prior knowledge about vacuum insulation. The project focuses only on wall structures in the single-storey villas, therefor, no indentations has been made on the floor- and roof structures or other building types. The project only focuses on newly constructed buildings. No calculations are made for moisture or production costs. / Mål uppsatta av EU innebär att samtliga byggnader som uppförs vid år 2020 måste vara nära-nollenergihus. För väggarna i konstruktionen innebär det att tjockare lager av isolering måste adderas vilket ger bredare väggkonstruktioner. Bredare väggkonstruktioner innebär även att boarean minskas. Vakuumisolering är ett högeffektivt isoleringsmaterial som genom sin låga värmeledningsförmåga har möjligheten att minska tjockleken vid väggkonstruktioner på grund av dess tunna skikt. Arbetet utreder ett förslag att applicera vakuumisolering i enplansvillor. För att uppnå arbetets mål har ett förslag på enplansvilla tagits fram. Beräkningar har gjorts och förslaget är framtaget som ett alternativ för att visa hur en villa innehållande vakuumisolering kan utformas. Det empiriska materialet har samlats in genom intervjuer, dokumentanalyser samt litteraturstudier. Empirin analyseras sedan tillsammans med det framtagna teoretiska ramverket genom litteraturstudier och dokumentanalyser. Att skapa en väggkonstruktion med vakuumisolering som primär isolering betyder oftast att väggen blir avsevärt mycket tunnare än en väggkonstruktion av traditionell isolering, vilket betyder att boarea kan sparas. Vakuumisolering måste skyddas på rätt sätt i väggkonstruktioner eftersom materialet lätt punkteras varpå det förlorar den största delen av sin isoleringsförmåga. Idag är inte vakuumisolering utbrett på den svenska byggmarknaden vilket beror på många faktorer, bland annat dess höga pris. Vakuumisolering är en väldigt bra problemlösare som med fördel kan användas i burspråk för att vinna extra utrymme. Det kan även användas i trånga utrymmen som elnischar. Ur ekonomisk synpunkt ger vakuumisolering störst fördel i städer där boarea per kvadratmeter är högre än motsvarande på landsbygden. För att ta del av arbetet krävs inga förkunskaper om vakuumisolering. Arbetet fokuserar endast på väggkonstruktioner i enplansvillor, därför har inga fördjupningar skett på golv- och takkonstruktioner eller andra byggnadstyper. Enbart nybyggnationer av trästommar är utrett. Beräkningar är inte gjorda för fukt och produktionskostnader.

This study has been focusing on a school located in the municipality of Laholm, South of Sweden. Employing an energy balance of the last five (5) years, a proposal for measures is made in terms of performance for comparison with the baseline of the current consumption trend. This comparison allowed us to narrow down the alternatives for the renovation with the potential to have a great impact on the school's energy use and indoor environment, but also on the preserved characteristics without any violation of the laws and regulations. A complementary analysis was used to analyze important variables for decision-making and implementation of improvements. This analysis consists of an exergy analysis which was utilized as a pre-design tool for an optimized building renovation proposal. Exergy losses were calculated to assess the performance of the systems. The study revealed that in relation to the use of new technologies and materials, aerogel and vacuum insulation panels bring relevant savings as their insulation mechanisms are the most efficient for such a building in a climate like Laholm. As for the heating system, it was evident that the use of a geothermal heat pump associated to PV panels brings considerable energy benefits when compared to the current oil boiler system and given that the village does not yet have a local district heating system. When the proposed measures are applied during 2022- 2023, the results will show that also older buildings can be energy efficient which is demanded of the buildings stock throughout the European Union.

Thermal resistance per unit thickness for Vacuum Insulation Panel (VIP) is 5 to 10 times higher than conventional insulation materials. This makes VIP an attractive option for retrofitting exterior building envelopes. Insulation can be added in an exterior wall either on the interior side, exterior side or in the available stud cavity. VIP has high vapor diffusion resistance factor and could lead to moisture management risk in the wall layers because of the steep temperature gradient in the wall generated due to very high thermal resistance of VIP. VIP is a relatively new insulation material for building envelope construction, thus the hygrothermal or moisture management performance of VIP-insulated exterior building envelopes need to be critically analyzed before its application. This study aims to evaluate the moisture management risk associated with wood-frame stucco-cladded exterior walls retrofitted with VIP using a 2-D hygrothermal simulation tool WUFI-2D. Eight North American locations were considered, based on Moisture Index (MI) which varied between 0.13 and 1.17, and two different indoor hygrothermal loading conditions as prescribed by the ASHRAE 160P and EN 13788, respectively. The outputs from hygrothermal simulations (water content, relative humidity and temperature) were critically analysed and expressed further using freeze-thaw cycles and RHT indices. The results show that the appropriately designed VIP retrofitted walls can have superior moisture management performance as compared to conventional stucco-cladded wall. / Graduate