No description available.

No description available.

This thesis deals with predicting the latency between two network nodes, such as the two stations, two servers or server and station. The main reason for adoption of effective latency prediction techniques is the elimination of network load caused by unnecessary repeated transmissios or by direct measurement of the latency. Of the many proposed methods of latency estimation, this thesis is focused on methods using artificial coordinate systems with primary focus on the Vivaldi algorithm. Characteristics of the latency prediction methods and properties of various coordinate systems used in practice are evaluated. The issue of the number of dimensions of space defined only by the latency matrix between nodes is also mentioned. Furthermore, some other systems, based on logical clustering of nearby nodes, are mentioned. Description of simulation software VivaldiMonitor developed as part of the thesis is included. The primary purpose is analysis of the behavior of overlay networks implementing Vivaldi algorithm with less than a few hundred nodes. The Vivaldi algorithm is assessed by several simulations carried out using the aforementioned software.

Phased array antennas with small size and light weight are proposed to make signal transmitting more efficiently and accurately. These antennas have such advantages that they can realize beam scanning over a large range, accurately track and identify targets within the observation range. In beam scanning, the scan loss which is the difference between the scanned gain and broadside gain has a great impact on the performance of phased array antennas. This thesis aims to study how to reduce the scan loss while the beam is scanned over a wide range. One of the methods to reduce the scan loss is to widen the beam-width of the embedded radiation pattern. With the wide beam-width, the gain reduction due to beam scanning would be small. We propose a method to replace a conventional half-wavelength unit-cell in an array with a sub-array composed of 5 miniaturized elements with special phase/amplitude distribution. The size of the sub-array is finely tuned in this thesis to achieve the goal of wide beam-width without any grating lobe. Then, in order to further expand the beam-width, the ideal power divider is utilized to apply specific weight to the sub-array. The simulation result shows that the maximum scan loss for the considered case is 3.67dB over ±80° scan range with an voltage amplitude distribution of [0.234, 0.64, 0.26, 0.64, 0.234] (1) and a phase of 88° between the 5 sub-array elements, which can be realized by the ideal power divider. If the allowed gain reduction is relaxed to 5dB, the scan coverage can be extended to ±89°. / Fasstyrda antenner med eu liten storlek och låg vikt har förslegits för att göra signalöverföring effektivt och korrekt. Dessa antenner har stora fördelar i att de kan realisera stort område. De kan också följa och identifiera mål inom observationsområdet. Vid strålskanning är skanningsförlusten, som är skillnaden mellan den skannade förstärkningen och förstärkningen vid den breda sidan, följande har stor inverkan på prestandan hos fasstyrda antenner. Denna avhandling syftar till att studera hur man minskar skanningsförlusten när strålen skannar inom ett brett skanningsområde. En av metoderna för att minska skanningsförlusten är att bredda strålbredden i det inbyggda strålningsmönstret. Med en bred strålbredd blir förstärkningsminskningen på grund av strålskanning liten. Vi föreslår en metod för att ersätta en konventionell halvvågig enhetscell i en matris med en delmatris som består av 5 miniatyriserade element med speciell fas/amplitudfördelning. Storleken på delarrayen är finjusterad i denna avhandling för att uppnå målet med bred strålbredd utan någon gitterlob. För att ytterligare utöka strålbredden används sedan den ideala effektdelaren för att ge subarrayet en särskild vikt. Simuleringsresultatet visar att den maximala skanningsförlusten för det undersökta fallet är 3,67dB inom ±80° täckningsvinkel med amplitudfördelning av [0.234, 0.64, 0.26, 0.64, 0.234] (2) och fas av 88°, som kan realiseras av den idealiska effektdelaren. Om kravet på minskningen av förstårluing sänks till 5dB, kan täckningen breddas till ±89°.

During the last years, MultiProtocol Label Switching (MPLS) has been deployed by most large Service Providers (SP). The main driver for MPLS deployment is the ability to provide new services with stringent Service Level Agreements (SLAs) such as layer-2 and layer-3 Virtual Private Networks (VPNs) as well as Voice and Video over IP. Most of these services are already deployed inside single SP networks. However, customers now require world-wide VPN and VoIP services. Therefore, SPs need to collaborate to offer these services across multiple SP networks. Inside a single SP network, each node usually knows the complete topology of the network with the load and delay of all the links. Based on this information, each router is able to compute constrained paths toward any other router inside the SP network. Then, it can establish a connection and reserve resources along the computed path with the Resource reSerVation Protocol (RSVP-TE). However, when services with stringent requirements must cross multiple SP networks the computation of the path becomes a problem. Routers in different SP networks exchange routing information by using the Border Gateway Protocol (BGP). BGP provides reachability information. It does not distribute complete topology, delay and bandwidth information. One way to provide guaranteed services crossing different SPs is to delegate the computation of the paths to a Path Computation Element (PCE) that learns the topology of the different SPs. However, this requires that SPs reveal information that they usually consider confidential, their topology. In this thesis, we perform active measurements to show the difficulty to engineer the interdomain traffic with BGP. MPLS together with RSVP-TE provide much more control on the traffic. We define extensions to RSVP-TE for the protection of inter-AS MPLS paths. The aim is to be able to provide the same service guarantees as inside a domain while keeping the internal topology of SPs confidential, as required by SPs. We propose and evaluate distributed techniques relying on PCEs for the computation of interdomain constrained paths respecting the latter confidentiality requirement.

In this thesis, parametric study and design of Vivaldi antennas and arrays are studied. The parameters of single element antennas and arrays are investigated regarding their effects on the design. The return loss responses and radiation patterns are considered in the parametric study. The results of simulations realized using Ansoft HFSS, a high frequency electromagnetic field simulation program, are shown and discussed. Two different Vivaldi antennas operating in 8.5-10.5 GHz frequency band with return loss responses better than 15 dB are designed based on the results of parametric study. Stripline to slotline transition is used in the feeding section of both antennas. In the same manner, two different 8-element uniform linear arrays operating in 8.5-10.5 GHz with half power beam widths smaller than 12&amp / #730 / and side lobe levels smaller than 13 dB are designed. Binomial and Dolph-Chebyshev feeding techniques are also investigated in order to improve half power beamwidths and side lobe levels of the designed arrays. The designed single element Vivaldi antennas and a linear array of Vivaldi antennas are fabricated. The return loss response and radiation patterns of the fabricated antennas and the array are measured and compared with the simulation results.

Auf starke Resonanz stieß das ganz auf Musikschätzen der SLUB beruhende Jubiläumskonzert, das am 22. April 2006...

Thesis (D.M.A.)--University of North Texas, 2008. / System requirements: Adobe Acrobat Reader. Accompanied by 4 recitals, recorded Nov. 7, 2005, Mar. 20, 2006, June 5, 2006, and Nov. 5, 2007. Includes bibliographical references (p. 80-83).

Submitted by Erika Demachki (erikademachki@gmail.com) on 2014-10-30T16:51:52Z No. of bitstreams: 2 Dissertação - Marcelo Cazarotto Brombilla - 2013.pdf: 17510196 bytes, checksum: 4af51346be135db0fd653afe831b30a0 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) / Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2014-10-31T09:51:20Z (GMT) No. of bitstreams: 2 Dissertação - Marcelo Cazarotto Brombilla - 2013.pdf: 17510196 bytes, checksum: 4af51346be135db0fd653afe831b30a0 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) / Made available in DSpace on 2014-10-31T09:51:20Z (GMT). No. of bitstreams: 2 Dissertação - Marcelo Cazarotto Brombilla - 2013.pdf: 17510196 bytes, checksum: 4af51346be135db0fd653afe831b30a0 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) Previous issue date: 2013-04-26 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / This research deals with the realization of a transcription for solo guitar of the RV 199 concerto by Antonio Vivaldi, according to the procedures used by J. S. Bach in his transcription of RV 299, which resulted in the harpsichord concerto BWV 973. We carried out a comparative analysis of Vivaldi’s original RV 299 with the transcription of Bach’s BWV 973; these procedures were applied to a transcription for solo guitar of RV 199, and presented in two ways, a version in two staves and a final version for performance. / A presente pesquisa trata da realização de uma transcrição para violão solo do concerto RV 199 de Antonio Vivaldi, segundo os procedimentos utilizados por J. S. Bach na transcrição do concerto RV 299, que resultou no concerto para cravo BWV 973. Procedeu-se uma análise comparativa do original de Vivaldi RV 299 com a transcrição de Bach BWV 973; estes procedimentos foram aplicados na transcrição para violão solo do concerto RV 199 que foi apresentada em duas maneiras, a saber, uma versão em duas pautas e uma versão final de performance em uma pauta.

An active, broadband antenna module amenable for use in low cost phased arrays is proposed. The module consists of a Vivaldi antenna integrated with a frequency conversion integrated circuit. A method of orthogonally mounting endfire antennas onto an array motherboard is developed using castellated vias. A castellated active isolated Vivaldi antenna package is designed, fabricated, and measured. An 8x1 phased array of castellated, active Vivaldi antenna packages is designed and assembled. Each element has approximately one octave of bandwidth centered in X-band, and each is mounted onto a coplanar waveguide motherboard. Radiation patterns of the array are measured at several frequencies and scan angles.