The aim of this final thesis is to make it easier for the customer of a new designed house to get a picture of what the house will look like inside before it has been built. A method, which can be applied by any construction company who likes to visualize there buildings, has been designed and tested. One works after a regular design planning which is transformed into a three dimensional model of the house. In a rendering program, materials and surfaces are chosen for the model and then a picture of the finished product is made. The programs used for this work are ADT 2006 and VIZ Render. To evaluate the use of this method I’ve chosen to cooperate with LB-Hus which is a housing company that is specialized in building detached houses. I applied the method on one of their new houses and together with their salesman we evaluated the result. The pictures fills its aim and makes it easier for the customer. The method is something LB-Hus could think of using in the future.

<p>The aim of this final thesis is to make it easier for the customer of a new designed house to get a picture of what the house will look like inside before it has been built.</p><p>A method, which can be applied by any construction company who likes to visualize there buildings, has been designed and tested. One works after a regular design planning which is transformed into a three dimensional model of the house. In a rendering program, materials and surfaces are chosen for the model and then a picture of the finished product is made. The programs used for this work are ADT 2006 and VIZ Render.</p><p>To evaluate the use of this method I’ve chosen to cooperate with LB-Hus which is a housing company that is specialized in building detached houses. I applied the method on one of their new houses and together with their salesman we evaluated the result.</p><p>The pictures fills its aim and makes it easier for the customer. The method is something LB-Hus could think of using in the future.</p>

This thesis presents the analysis of artistic techniques of paintings from the Precisionist movement and the implementation of the results of the analysis in the creation of three new works of art using digital media. Artists working in digital media express features of pre-digital artistic movements with varying degrees of adherence to principles, intentions, and awareness. This thesis seeks to create a bridge between the recognition of common features of Precisionist works and the expression of those elements in new works through the use of a system of analysis, interpretation, and translation. One outcome of this thesis is the description of a methodology for interpretation and translation that can be applied to other art movements. The Precisionist period within the Modern Art movement has both a historical importance in the world of art and a thematic relevance to popular uses of digital media ? specifically the representation of meaning and mood derived from industrial settings. Its influences can be traced from cubist, futurist, and constructivist art, as well as influencing the development of surrealism. It is considered the first solely American movement within Modern Art. Charles Sheeler's work plays a key role in the visual analysis portion of this research. Sheeler's work offers examples for applying 2D precisionist artistic style as aesthetic inspiration in creating a three-part production of 3D digital and video work. Work from precisionist artists Charles Demuth and Edmund Lewandowski also contribute some unique artistic characteristics considered during the analytical portion of this study. The new artistic works proposed include: (1) a linear, live-action short video with post-production manipulation; (2) a linear, 3D animated work; and (3) a non-linear, interactive 3D game environment.

Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology. / Pulsed Ultrasound Velocimetry combined with Pressure Difference (PUV+PD) measurement is a non-invasive in-line rheometric technique which is used to analyse the complex flow properties of industrial fluids for quality control purposes. Cape Peninsula University of Technology (CPUT) and Technical Research Institute of Sweden (SP) have developed and patented a new PUV+PD based system, called Flow-Viz™. Despite this advancement, the system and ultrasound sensor technology have not been fully tested and evaluated in a wide range of industrial fluids. Acoustic characterisation tests were carried out at SP, with the aim of understanding the ultrasound beam properties after propagating through industrial stainless steel (316L) pipe walls. For these tests, a high-precision robotic XYZ-scanner and needle hydrophone setup were used. Different ultrasound sensor configurations were mounted to a stainless steel pipe while using different coupling media between the transducer-to-wedge and sensor wedge-to-pipe boundaries. The ultrasound beam propagation after the wall interface was measured by navigating the needle hydrophone within a predefined 2-dimensional spatial grid. The most suitable coupling material was determined from the acoustic characterisation, and then used in the in-line rheological characterisation tests to evaluate the performance of the Flow-VizTM rheometric unit against conventional tube viscometry. The in-line rheological tests were conducted with bentonite, kaolin and Carboxymethyl cellulose (CMC) model fluids. The flow loop used consisted of three different pipe test sections; and two concentrations of each fluid were tested in order to ascertain the consistency of the measurements. The in-line rheological tests showed good agreement (±15%) between the two techniques and Flow-VizTM was able to provide important data at very low shear rates. Acoustic characterisation indicated that variations in the beam properties were highly dependent on the acoustic couplants used to mount the sensors to the stainless steel pipes. Furthermore, the in-line results showed the effectiveness of Flow-VizTM as an industrial rheometer. The non-invasive ultrasound sensor technology, was for the first time acoustically characterised through stainless steel. This information will now be used to further optimise the unique technology for advanced industrial applications, e.g. oil drilling fields, complex cement grout and food processing applications.

Grouting is performed in order to decrease the permeability and increase the stiffness of the material, especially soil and rock. For tunnelling and underground constructions, permeation grouting is done where cement based materials are pumped inside drilled boreholes under a constant pressure, higher than the ground water pressure. The aim of permeation grouting is to reduce the water flow into tunnels and caverns and to limit the lowering of the surrounding groundwater table. Cement based materials are commonly used as grout due to their availability and lower costs. To obtain a proper water sealing and reduce the lowering of the ground water table, a desired spread of grout must be achieved and the rheology of the cement grout is the governing factor for estimating the required spread. Rheological properties of cement grout such as viscosity and yield stress are commonly measured off-line using laboratory instruments, and some simple tools are available to make field measurements. Although the rheological properties of the grout that is used play a fundamental role in design and execution, no method has yet been developed to measure these properties in-line in field work. In addition to the real time measurement, there is no standard method for determining the yield stress for grouting applications. Despite the common usage of Bingham model fitting to determine the yield stress, the range of shear rate is often not specified or is neglected.   In this work, an in-line rheometry method combining the Ultrasound Velocity Profiling (UVP) technique with Pressure Difference (PD) measurements, known as “UVP+PD”, was successfully tested for continuous in-line measurements of concentrated micro cement based grouts. A major obstacle of using the ultrasound based methodology was the transducers, which would be capable of emitting sufficient acoustic energy and can be used in field conditions. The transducer technology was developed in a parallel project and the Flow-Viz industrial rheometer was found to be capable of detail measurement of the velocity profiles of cement grout. The shape of the velocity profiles was visualized, and the change in the shape of the profiles with concentration and time was observed. The viscosity and yield stress of the grout were determined using rheological models, e.g. Bingham and Herschel-Bulkley. In addition, rheological properties were determined using the non-model approach (gradient method) and the tube viscometry concept and were compared with results obtained using the rheological models. The UVP+PD method was found to be capable of determining the rheological behavior of cement grout regardless of the rheological model. The yield stress of cement grout was investigated using off-line rheometry techniques and UVP+PD in-line measurements. Tests were performed applying different shear histories and it was found that two ranges of yield stress indeed exist. Therefore, the design value of yield stress should be chosen with respect to the prevailing shear rate at the grout front for the required spread of grout. In addition, an appropriate shear rate range should be used when a Bingham fitting is done to determine the yield stress. In order to estimate the shear rate, plug thickness and velocity for one dimensional and two dimensional geometry, a non- dimensional nomogram was developed. The advantage of using the nomogram is that it does not depend on the applied pressure and the rheological properties of the grout and can therefore, be used as a simple design tool. Analytical approaches were used for the estimation and good agreements were found with numerical calculations and experimental results. In conclusion, in this work, it was found that it is possible to continuously measure the velocity profiles and determine the change of the rheological properties of cement grout using the ultrasound based UVP+PD method under field conditions. The yield stress was also investigated and it was found that two range of yield stress exist depending on the prevailing shear rate of the grout, which should be used for designing the grouting time at different conditions. In order to decide the design value of yield stress for grouting applications, a non-dimensional nomogram was developed that can be used to estimate the plug thickness, shear rate and velocity of the grout. / <p>Funding for the project was provided by the Swedish Rock Engineering Research Foundation (BeFo), The Swedish Research Council (FORMAS) and The Development Fund of the Swedish Construction Industry (SBUF), who are gratefully acknowledged. QC 20151112</p>

This interdisciplinary research project combines the fields of nautical archaeology and computer visualization in order to create an interactive virtual reconstruction of a Portuguese nau. Information about the shipbuilding process is gathered from 16th and 17th century treaties by Fernando Oliveira and Joao Batista Lavanha, as well as from Dr. Filipe Castro (Texas A&M Department of Anthropology). Eight registered tonnage formulas from the 15th to 17th century are used to estimate the cargo capacity of the nau. Using this information, I develop an algorithm that creates a parametric computer model of a nau hull and calculates its registered tonnage. This parametric model allows the user to choose between the Oliveira and Lavanha hull shapes, adjust parameters to fine tune the hull shape further, and save the information about the hull shape for future editing. The eight registered tonnage estimates are compared to the volume of the parametric hull model below a generic waterline. The process I use to adapt the information provided by the two shipbuilding treatises into an algorithm determines the hull shape of a nau. This allows for projects in the future to introduce other shipbuilding approaches and information as it becomes available to this parametric model.

The study investigated the application of the crime threat analysis process at station level within the Nelson Mandela Metro City area with the objective of determining inhibiting factors (constraints) and best practices. Qualitative research methodology was applied and interviews were conducted with crime analysts and specialised investigators/intelligence analysts. The research design can be best described as descriptive and explorative in nature. The crime threat analysis process embroils the application of various crime analysis techniques and the outcomes thereof intends to have a dual purpose of generating operational crime management information in assisting crime prevention initiatives and crime detection efforts, mainly focussing on the criminal activities of group offenders (organised crime related), repeat offenders and serial offenders. During the study it became evident that crime analysts understand and thus apply the crime threat analysis process indifferently, which impeded on the relevancy and the utilisation thereof as an effective crime management tool. / Criminology / M.Tech. (Policing)

The study investigated the application of the crime threat analysis process at station level within the Nelson Mandela Metro City area with the objective of determining inhibiting factors (constraints) and best practices. Qualitative research methodology was applied and interviews were conducted with crime analysts and specialised investigators/intelligence analysts. The research design can be best described as descriptive and explorative in nature. The crime threat analysis process embroils the application of various crime analysis techniques and the outcomes thereof intends to have a dual purpose of generating operational crime management information in assisting crime prevention initiatives and crime detection efforts, mainly focussing on the criminal activities of group offenders (organised crime related), repeat offenders and serial offenders. During the study it became evident that crime analysts understand and thus apply the crime threat analysis process indifferently, which impeded on the relevancy and the utilisation thereof as an effective crime management tool. / Criminology and Security Science / M.Tech. (Policing)