Spelling suggestions: "subject:"cortex -- motion"" "subject:"kortex -- motion""
241 |
Modeling and simulation of volume displacement effects in multiphase flowCihonski, Andrew John 24 September 2013 (has links)
There are many options available when selecting a computational model for
two-phase flows. It is important to understand all the features of the model
selected, including when the model is appropriate and how using it may affect
your results. This work examines how volume displacement effects in two-phase
Eulerian-Lagrangian models manifest themselves. Some test cases are examined
to determine what input these effects have on the flow, and if we can predict
when they will become important. Bubble injection into a traveling vortex ring is
studied in-depth, as it provides significant insight into the physics of these
volume displacement effects. When a few bubbles are entrained into a traveling
vortex ring, it has been shown that even at extremely low volume loadings, their
presence can significantly affect the structure of the vortex core (Sridhar & Katz
1999). A typical Eulerian-Lagrangian point-particle model with two-way coupling
for this dilute system, wherein the bubbles are assumed subgrid and momentum
point-sources are used to model their effect on the flow, is shown to be unable to
accurately capture the experimental trends of bubble settling location, bubble
escape, and vortex distortion for a range of bubble parameters and vortex
strengths. Accounting for fluid volume displacement due to bubble motion, using
a model termed as volumetric coupling, experimental trends on vortex distortion
and bubble settling location are well captured. The fluid displacement effects are
studied by introducing the notion of a volume displacement force, the net force
on the fluid due to volumetric coupling, which is found to be dominant even at
the low volume loadings investigated here. A method of quantifying of these
forces is derived and used to study the effects for a wide range of particle to
fluid density ratios in Taylor-Green vortices. A simple modification to the standard
point-particle Lagrangian approach is developed, wherein the interphase reaction
source terms are consistently altered to account for the fluid displacement effects
and reactions due to bubble accelerations. / Graduation date: 2013 / Access restricted to the OSU Community at author's request from Sept. 24, 2012 - Sept. 24, 2013
|
242 |
Hydrodynamics Of An Oscillating Foil With A Long Flexible Trailing EdgeShinde, Sachin Yashavant 04 1900 (has links)
In nature, many swimming and flying creatures use the principle of oscillatory lift-based propulsion. Often the flapping element is flexible, totally or partially. The flow dynamics because of a flexible flap is thus of considerable interest. We are interested especially in lunate fish propulsion. The present work investigates the effect of trailing edge flexibility on the flow field created by an oscillating airfoil in an attempt to mimic the flow around the flexible tails often found in fish.
A flexible flap with negligible mass and stiffness is attached at the trailing edge of NACA0015 airfoil. The flap length is 75% of the rigid chord length. The airfoil oscillates about a hinge point at 30% chord from the leading edge and at the same time it moves in a circular path in stationary water. The parameters varied are frequency, amplitude of oscillation and forward speed. For a given combination of amplitude and frequency of oscillation, the forward speed is chosen such that the Strouhal number comes around 0.3, which falls in the gamut of Strouhal numbers for maximum propulsive efficiency. We visualize the flow with dye and particles and measure velocities using Particle Image Velocimetry (PIV). We use shadow technique and image processing to study the flap dynamics.
We do a qualitative and quantitative comparison of the wake flow generated by two airfoil models, one with rigid trailing edge (model -B) and the other with flexible trailing edge (model -A) i.e. with a flexible flap fixed to the trailing edge. We study the flap dynamics, the flow around the flap, evolution of vortices, wake width, circulations around airfoil and vortices, momentum and energy in the wake (which is measure of propulsion efficiency), vortex geometry in the wake in terms of vortex spacing, etc. We also conduct a parametric study for both the models.
Flap dynamics plays a prominent role in defining the signature of the wake. The observed flap deflections are quite large and the flap exhibits more than one mode of deflection; this affects the vortex-shedding pattern. The flap tip also executes a near sinusoidal motion with a phase difference between the trailing edge and the flap tip. The dye visualization studies show that a flexible trailing edge induces multiple vortices while in case of a rigid trailing edge, large vortical structures are shed. In case of flexible trailing edge (model -A), the vortices are shed away from the mean path of motion and are arranged in a ‘reverse Karman vortex street’ pattern producing an undulating jet representing a thrust on the airfoil. For the same Strouhal number, in case of rigid trailing edge (model -B), the vortices are shed nearly along the mean path of motion indicating a momentumless wake. The wake structures, particularly in case of model -A, are nearly insensitive to variations in amplitude and frequency. The wake of model -B shows some variable flow patterns for different amplitudes of oscillation. Although the total chord of model -A is 1.75 times more than the chord of model -B, the wake width is nearly the same for the two models when the amplitude of oscillation is same. The addition of the flap to the airfoil keeps the wake flow two-dimensional or symmetric about the center plane for longer times and longer downstream distances in comparison with the wake flow generated by rigid trailing edge. For 15o and 20o amplitudes of oscillations, the flow separates over the airfoil itself; the interaction of the separated flow with the flexible flap is quite interesting, which needs further investigations. The wake generated by the airfoil with flexible flap at the trailing edge has some common features with the wakes generated by the flow over a flapping filament (which is the one-dimensional representation of a fluttering flag), an accelerating mullet fish (a carangiform swimmer) and a steadily swimming eel (an anguilliform swimmer).
|
243 |
On the interactions of sound waves and vorticesLegendre, César 08 January 2015 (has links)
The effects of vortices on the propagation of acoustic waves are numerous, from simple convection effects to instabilities in the acoustic phenomena, including absorption,<p>reflection and refraction effects. This work focusses on the effects of mean flow<p>vorticity on the acoustic propagation. First, a theoretical background is presented<p>in chapters 2-5. This part contains: (i) the fluid dynamics and thermodynamics<p>relations; (ii) theories of sound generation by turbulent flows; and (iii) operators taken<p>from scientific literature to take into account the vorticity effects on acoustics. Later,<p>a family of scalar operators based on total enthalpy terms are derived to handle mean<p>vorticity effects of arbitrary flows in acoustics (chapter 6). Furthermore, analytical<p>solutions of Pridmore-Brown’s equation are featured considering exponential boundary<p>layers whose profile depend on the acoustic parameters of the problem (chapter 7).<p>Finally, an extension of Pridmore-Brown’s equation is formulated for predicting the<p>acoustic propagation over a locally-reacting liner in presence of a boundary layer of<p>linear velocity profile superimposed to a constant cross flow (chapter 8).<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
|
244 |
Linear and Nonlinear Motion of a Barotropic VortexGonzalez, Israel 25 February 2014 (has links)
The linear Barotropic Non-Divergent simulation of a vortex on a beta plane is consistent with Willoughby’s earlier shallow-water divergent results in that it produced an unbounded accelerating westward and poleward motion without an asymptotic limit. However, Montgomery’s work which yielded finite linear drift speeds for his completely cyclonic vortex was inconsistent with ours. The nonlinearly-forced streamfunction exhibited a beta-gyre like structure, but with opposite polarity phase to the linear gyres. Utilization of the linear model with time-dependent, but otherwise beta-like, forcing revealed increasing magnitude and phase reversal in the neighborhood of a low cyclonic frequency. Here, the mean bounded vortex has an outer waveguide that supports Vortex Rossby Wave propagation that is faster than the mean flow and confined to a very narrow band of frequencies between zero and the Vortex Rossby Wave cutoff. The low frequency waves constitute the beta-gyre mode described previously by Willoughby.
|
245 |
Energy Separation And Lox Separation Studies In Vortex TubesBehera, Upendra 01 1900 (has links) (PDF)
Vortex Tube (VT) is a simple device having no moving mechanical parts, in which compressed gas at high pressure is injected through one or more tangential nozzles into a vortex chamber resulting in the separation of the inlet flow into two low pressure streams. One of the streams is the peripheral flow that is warmer than the inlet stream while the other is the central (core) flow that is colder than the inlet stream. This separation of the inlet flow into high and low temperature streams is known as temperature or energy separation. It is suggested by many investigators that compressed air of few atmospheres pressure and at room temperature can produce temperatures as high as +200ºC at the hot end (peripheral flow exit) and as low as -50ºC at the cold end (core flow exit) of the VT. Though VTs have large potential for simple heating and cooling applications, the mechanism of energy separation is not clear so far. Based on their studies, many investigators have suggested various theories, different from each other, but having specific lacunas and is an unresolved issue. Also, till date, experimental and industrial designs of the VTs are based purely on empirical correlations.
Apart from heating and cooling applications, VTs can also be used for separation of binary gas mixtures and separation of oxygen from two-phase precooled air stream. The conceptual futuristic cryogenic launch vehicle designs are being attempted with in-flight liquid oxygen (LOX) collection system that significantly improves the pay load fraction. Vortex tube technology is one of the few promising technologies for futuristic in-flight LOX separation based launch vehicles. This technology has significant advantages over its counterparts as it is a simple, compact and light weight, and most importantly have no moving parts and unaffected by gravity and orientation.
In order that VTs become an acceptable technology for in-flight LOX separation system, it is necessary to achieve minimum oxygen purity of 90% with more than 60% yield (separation efficiency) for the oxygen enriched stream in the VT. A survey of the available open literature has shown very little reported details, in particular, on achieving the required specifications for in-flight LOX separation systems. Till date, the highest LOX purity of 60% with 40% separation efficiency has been reported with VT technology. In view of the above mentioned facts, the work carried out has been focused on to: • Optimize the critical parameters of the VT to achieve maximum energy separation by CFD and experimental studies. • Understand the flow behaviour in the VT by estimating the velocity, temperature and pressure profiles at various locations in the VT and validation of secondary circulation flow and its effect on the performance of energy separation in VT. • Estimation of the energy transfer between the core and the peripheral layers of fluid flow in VT by analytical and CFD methods to propose the most appropriate mechanism of energy separation in VT. • Design and development of a dedicated experimental setup for both energy separation and LOX separation studies in VTs. • Design and fabrication of straight and conical VTs and experimental programme on energy separation and LOX separation. • Development of the VT air separation technology to achieve the required specifications of in-flight LOX separation system for futuristic launch vehicles. With these specific objectives and motivations, the total work was carried out with the following planned and sequential steps: • The first step was the CFD modeling of the VT with the available CFD software (Star-CD) and obtain the energy separation phenomena for a 12mm diameter VT. After gaining sufficient confidence level, optimization of the critical parameters like the air injection nozzle profile, number of nozzles, cold end orifice diameter dc, length to diameter (L/D) ratio, hot gas fraction etc of the VT was carried out through CFD and experimental studies. • The studies show that 6 convergent nozzles perform better in comparison to other configurations like circular helical, rectangular helical, 2 convergent and 6 straight nozzles. The studies also show that cold end orifice diameter (dc) plays an important role on energy separation and bring out the existence of secondary circulation flow with improper design of cold end orifice diameter. Through our studies, the effect of cold end diameter on the secondary circulation flow has been evaluated for the first time. Also, the mechanism of energy transfer in VT based on heat pump mechanism enabled by secondary circulation flow as suggested by some investigators has been evaluated in our studies. The studies show that cold end orifice diameter dc = 7mm is optimum for 12mm diameter VT, which matches fairly with the correlations given by other investigators. The studies confirms that CFD modeling carried out in this work is capable of selecting the correct dc value for a VT, without resorting to the empirical correlations as a design guide or a laborious experimental programme. • Through the CFD and experimental studies on different length to diameter (L/D) ratios and hot gas fractions, maximum hot gas temperature of 391K was obtained for L/D = 30 with hot gas fraction of 12-15 % and minimum cold gas temperature of 267K for L/D = 35 was obtained for cold gas fraction ≈ 60% (lowest cold gas fraction possible with the present experimental system). • CFD analysis has been carried out to investigate the variation of static and total temperatures, static and total pressures as well as the velocity components of the particles as it progresses in the flow field, starting from the entry through the nozzles to the exit of the VT by tracking the particles to understand the flow phenomenon and energy transfer mechanism inside the VT. The studies indicate that the mechanism of energy transfer from the core flow to the peripheral flow in VT is predominantly occurs by the tangential shear work. Thus the investigations reported in the thesis have given a clear understanding of the contributing mechanism for energy separation in VT, which has been an unresolved issue for long time. The net energy transfer between the core and the peripheral fluid has been calculated analytically and compared with the values obtained by CFD model for VTs of L/D ratios equal to 10 and 30. The net energy transfer by analytical and CFD model for VT with L/D = 10 is 159.87W and 154.2W respectively whereas the net energy transfer by analytical and CFD model for VT with L/D = 30 is 199.87W and 192.3W respectively. The results show that CFD results are in very good agreement with the analytical results and CFD can be used as a tool for optimization of the critical parameters and to analyze the flow parameters and heat transfer analysis for VTs. Also, the net energy transfer between the core and peripheral fluids calculated analytically matches very well with that of the net energy transfer by CFD analysis, without considering the effect of acoustic streaming. Thus acoustic streaming may not be the mechanism of energy separation in VT as suggested by some investigators. • By optimizing the critical parameters of the 12mm diameter straight VT through CFD and experimental studies, LOX separation studies have been carried out using both straight and conical VTs of dc = 7mm and of different L/D ratios for high LOX purity and separation efficiency. It is observed that conical (3º divergence) VTs perform better as compared to straight VTs for LOX separation whereas straight VTs perform better for energy separation. The better performance of conical VT as compared to straight VTs can be attributed to its increased surface area for condensation-evaporation phenomenon of oxygen and nitrogen molecules. Experimental studies have been conducted to evaluate the influence of the inlet pressure and the inlet temperature (liquid fraction) on LOX purity. Studies indicate that for achieving high LOX purity for the studied experimental system, the inlet pressure is to be in the range of 6-6.5bar and there exists a very narrow band of inlet temperature zone in which high LOX purity can be achieved. Experimental studies on VTs show that VT can be optimized suitably either for high LOX purity with low separation efficiency or low LOX purity with high separation efficiency by adjusting the hot end mass fraction accordingly. It is also observed that it is not possible to obtain both high purity and high separation efficiency simultaneously with the single VT. Staging approach has to be adapted to achieve higher LOX purity with higher separation efficiency. By staging the VTs, the enriched air stream (hot end outlet flow) from the first stage of VTs is introduced to the inlet of the second stage of VTs. Experimental studies have been conducted to evaluate the design parameters on staging of VTs. LOX purity of 48% with 89% separation efficiency has been achieved for conical first stage VT of L/D = 25. LOX purity of about 94% with separation efficiency of 84% has been achieved for 50% oxygen content at the inlet of the second stage VT. Similarly, LOX purity of 96% with separation efficiency of 73.5% has been achieved for 60% oxygen content at the inlet of the VT. This is the highest LOX purity and separation efficiency reported so far indicating that, conical VT of optimized diameter, L/D ratio and orifice diameter can yield the hot end flow very close to the target value of futuristic in-flight LOX separation based launch vehicles.
The present investigation has focused the optimization of the critical parameters of VTs through CFD and experimental studies. It has also given an insight to the mechanism of energy transfer between the core and peripheral flow in VT by evaluating two of the existing theories on mechanism of energy transfer in VT. The studies also highlighted the fact that custom designed and precision fabricated VTs can be very useful for obtaining maximum / minimum temperatures of fluid flow as well as LOX separation with high purity and high separation efficiency needed for futuristic in-flight LOX separation based space launch vehicles.
|
246 |
Submesoscale coherent vortices in the deep Brazil BasinKassis, Patricia January 2000 (has links)
Thesis (S.M.)--Joint Program in Physical Oceanography (Massachusetts Institute of Technology, Dept. of Earth, Atmospheric, and Planetary Sciences and the Woods Hole Oceanographic Institution), 2000. / Includes bibliographical references (p. 65-67). / With Lagrangian and hydrographic data taken in the deep Brazil Basin, we identify several submesoscale coherent vortices (SCVs). These features contrast with SCV paradigms in that float data indicate approximately equal populations of cyclonic and anticyclonic vortices, and hydrographic data suggest that roughly half exhibit the convex lens shape generally associated with SCVs, while half are instead shaped like a concave lens, with isopycnal surfaces pinched together. There is some evidence that the vortex cores may be enriched in warm, salty North Atlantic Deep Water, suggesting formation in the north or northwest regions of the basin. Data is available from 153 floats which were ballasted for 2500 and 4000 db pressures. They tracked 34 eddies, which are believed to be roughly 30 km in diameter, and rotate with apparent periods of about 30 days. Many floats experienced formation or entrainment events, and destruction or detrainment events, near seamounts. / by Patricia Kassis. / S.M.
|
247 |
Estudo do comportamento estatico e dinamico de um Riser vertical com boia de subsuperficie / Static and dynamic behaviors study of a vertical Riser with subsurface buoyChampi Farfan, David 14 July 2005 (has links)
Orientador: Celso Kazuyuki Morooka / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica e Instituto de Geociencias / Made available in DSpace on 2018-08-04T17:58:55Z (GMT). No. of bitstreams: 1
ChampiFarfan_David_M.pdf: 3228003 bytes, checksum: 8b3ed290e87307aa0cc1afcdd9c2ecf3 (MD5)
Previous issue date: 2005 / Resumo: Na atualidade as descobertas de óleo a grandes profundidades no mar têm levado ao desenvolvimento de campos localizados numa profundidade aproximada de 3000m, sendo então o sistema de Riser Híbrido Auto-Sustentável uma alternativa atraente. O
presente trabalho apresenta os modelos matemáticos que descrevem o comportamento estático e dinâmico de um riser vertical com bóia de sub-superfície nas direções in-line, que é a direção da onda e correnteza no mar, e a direção transversal, perpendicular à
direção in-line. Apresentam-se também simulações numéricas em diferentes condições de onda e correnteza e o seu efeito combinado, assim como o estudo paramétrico para as principais variáveis que influenciam no comportamento dinâmico e estático / Abstract: Nowadays, the oil discoveries at big depths in the sea have taken to the development of fields located in an approach depth of 3000m, being the Self Standing Hybrid Riser an attractive alternative. The present work presents the mathematical models that describe the static and dynamic behavior of a Vertical riser with a subsurface buoy in the directions inline, that it is the direction of the wave and currents in the sea, and the transversal, that is perpendicular to the in-line direction. Numerical simulations in different conditions of wave and currents are also presented and its combined effect is studied, as well as the parametric study for the main variable that influences its dynamic and static behavior / Mestrado / Explotação / Mestre em Ciências e Engenharia de Petróleo
|
248 |
Dynamique des tourbillons pour quelques modèles de transport non-linéaires / Vortex dynamics for some non-linear transport modelsHassainia, Zineb 08 June 2015 (has links)
Cette thèse est consacrée à l'étude théorique de quelques modèles d'évolution non-linéaires issus de la mécanique des fluides. Nous distinguons trois parties indépendantes. La première partie de la thèse traite essentiellement de l'existence des poches de tourbillon en rotation uniforme (appelées aussi V-states) pour un modèle quasi-géostrophique non visqueux. Notre étude est répartie sur deux chapitres où les poches présentent des structures topologiques différentes. Dans le premier chapitre nous étudions le cas simplement connexe et nous validons l'existence de ces structures dans un voisinage du tourbillon de Rankine en utilisant des techniques de bifurcation. Dans le deuxième chapitre nous abordons le cas doublement connexe où la poche admet un seul trou. Plus précisément, proche d'un anneau donné, nous décrivons cette famille par des branches dénombrables bifurquant de cet anneau à certaines valeurs explicites des vitesses angulaires liées aux fonctions de Bessel. Notre étude théorique a été complétée par des simulations numériques portant sur les V-states limites et un bon nombre de constatations ont été formulées ouvrant la porte à de nouvelles perspectives de recherche. La seconde partie concerne l'étude du problème de Cauchy pour le système de Boussinesq non visqueux 2D avec des données initiales de type Yudovich. Le problème est dans un certain sens critique à cause de quelques termes comportant la transformée de Riesz dans la formulation tourbillon-densité. Nous donnons une réponse positive pour une sous-classe comprenant les poches de tourbillon régulières et singulières. Dans la dernière partie nous analysons le problème de la limite incompressible pour les équations d'Euler isentropiques 2D associées à des données initiales très mal préparées et pour lesquelles les tourbillons ne sont pas forcément bornés mais appartiennent plutôt à des espaces de type ''BMO'' à poids. On utilise principalement deux ingrédients: d'un côté les estimations de Strichartz pour contrôler la partie acoustique. D'un autre côté, on se sert de la structure de transport compressible du tourbillon et on démontre une estimation de propagation linéaire dans l'esprit d'un travail récent de Bernicot et Keraani mené dans le cas incompressible. / In this dissertation, we are concerned with the study of some non-linear evolution models arising in fluid mechanics. We distinguish three independent parts. The first part of the thesis deals with the existence of the rotating vortex patches (called also V-states) for an inviscid quasi-geostrophic model. Our study is divided into two chapters dealing with different topological structures of the V-states. In the first chapter we study the simply connected case and we prove the existence of such structures in a neighborhood of the Rankine vortices by using the bifurcation theory. In the second chapter we discuss the doubly connected case where the patches admit only one hole. More precisely, close to a given annulus we describe this family by countable branches bifurcating from this annulus at some explicit angular velocities related to Bessel functions of the first kind. Our theoretical study was completed by numerical simulations on the limiting V-states and a number of interesting numerical observation were formulated opening new research perspectives. The second part of the thesis concerns the local well-posedness theory for the inviscid Boussinesq system with rough initial data. The problem is in some sense critical due to some terms involving Riesz transforms in the vorticity-density formulation. We give a positive answer for a special sub-class of Yudovich data including smooth and singular vortex patches. In the last part we address the problem of the incompressible limit for the 2D isentropic fluids associated to ill-prepared initial data and for which the vortices are not necessarily bounded and belong to some weighted BMO spaces. We mainly use two ingredients: On one hand, the Strichartz estimates to control the acoustic part and prove that it does not contribute for low Mach number. On the other hand, we use the transport compressible structure of the vorticity and we establish a linear propagation estimate in the spirit of a recent work of Bernicot and Keraani conducted in the incompressible case. The first part of the thesis deals with the existence of the rotating vortex patches (called also V-states) for an inviscid quasi-geostrophic model. Our study is divided into two chapters dealing with different topological structures of the V-states. In the first chapter we study the simply connected case and we prove the existence of such structures in a neighborhood of the Rankine vortices by using the bifurcation theory. In the second chapter we discuss the doubly connected case where the patches admit only one hole. More precisely, close to a given annulus we describe this family by countable branches bifurcating from this annulus at some explicit angular velocities related to Bessel functions of the first kind. Our theoretical study was completed by numerical simulations on the limiting V-states and a number of interesting numerical observation were formulated opening new research perspectives. The second part of the thesis concerns the local well-posedness theory for the inviscid Boussinesq system with rough initial data. The problem is in some sense critical due to some terms involving Riesz transforms in the vorticity-density formulation. We give a positive answer for a special sub-class of Yudovich data including smooth and singular vortex patches. In the last part we address the problem of the incompressible limit for the 2D isentropic fluids associated to ill-prepared initial data and for which the vortices are not necessarily bounded and belong to some weighted BMO spaces. We mainly use two ingredients: On one hand, the Strichartz estimates to control the acoustic part and prove that it does not contribute for low Mach number. On the other hand, we use the transport compressible structure of the vorticity and we establish a linear propagation estimate in the spirit of a recent work of Bernicot and Keraani conducted in the incompressible case.
|
249 |
Generation of mid-ocean eddies : the local baroclinic instability hypothesisArbic, Brian K January 2000 (has links)
Thesis (Ph.D.)--Joint Program in Physical Oceanography (Massachusetts Institute of Technology, Dept. of Earth, Atmospheric, and Planetary Sciences and the Woods Hole Oceanographic Institution), 2000. / Includes bibliographical references (p. 284-290). / by Brian Kenneth Arbic. / Ph.D.
|
250 |
Experimental and numerical study of aeroacoustic phenomena in large solid propellant boostersAnthoine, Jérôme P.L.R. 26 October 2000 (has links)
The present research is an experimental and numerical study of aeroacoustic phenomena occurring in large solid rocket motors (SRM) as the Ariane 5 boosters. The emphasis is given to aeroacoustic instabilities that may lead to pressure and thrust oscillations which reduce the rocket motor performance and could damage the payload. The study is carried out within the framework of a CNES (Centre National d'Etudes Spatiales) research program. <p><p>Large SRM are composed of a submerged nozzle and segmented propellant grains separated by inhibitors. During propellant combustion, a cavity appears around the nozzle. Vortical flow structures may be formed from the inhibitor (Obstacle Vortex Shedding OVS) or from natural instability of the radial flow resulting from the propellant combustion (Surface Vortex Shedding SVS). Such hydrodynamic manifestations drive pressure oscillations in the confined flow established in the motor. When the vortex shedding frequency synchronizes acoustic modes of the motor chamber, resonance may occur and sound pressure can be amplified by vortex nozzle interaction.<p><p>Original analytical models, in particular based on vortex sound theory, point out the parameters controlling the flow-acoustic coupling and the effect of the nozzle design on sound production. They allow the appropriate definition of experimental tests.<p><p>The experiments are conducted on axisymmetric cold flow models respecting the Mach number similarity with the Ariane 5 SRM. The test section includes only one inhibitor and a submerged nozzle. The flow is either created by an axial air injection at the forward end or by a radial injection uniformly distributed along chamber porous walls. The internal Mach number can be varied continuously by means of a movable needle placed in the nozzle throat. Acoustic pressure measurements are taken by means of PCB piezoelectric transducers. A particle image velocimetry technique (PIV) is used to analyse the effect of the acoustic resonance on the mean flow field and vortex properties. An active control loop is exploited to obtain resonant and non resonant conditions for the same operating point.<p><p>Finally, numerical simulations are performed using a time dependent Navier Stokes solver. The analysis of the unsteady simulations provides pressure spectra, sequence of vorticity fields and average flow field. Comparison to experimental data is conducted.<p><p>The OVS and SVS instabilities are identified. The inhibitor parameters, the chamber Mach number and length, and the nozzle geometry are varied to analyse their effect on the flow acoustic coupling.<p><p>The conclusions state that flow acoustic coupling is mainly observed for nozzles including cavity. The nozzle geometry has an effect on the pressure oscillations through a coupling between the acoustic fluctuations induced by the cavity volume and the vortices travelling in front of the cavity entrance. When resonance occurs, the sound pressure level increases linearly with the chamber Mach number, the frequency and the cavity volume. In absence of cavity, the pressure fluctuations are damped.<p><p> / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished
|
Page generated in 0.1555 seconds