<p>Waste management is a global environmental issue which concerns about a very significant problem in today’s world. There is a considerable amount of disposal of waste without proper segregation which has lead to both economic and environment sufferings. It is still practiced in many cities. There is a tremendous amount of loss in terms of environmental degradation, health hazards and economic descend due to direct disposal of waste. It is better to segregate the waste at the initial stages where it is generated, rather than going for a later option which is inconvenient and expensive. There has to be appropriate planning for proper waste management by means of analysis of the waste situation of the area.</p><p>This paper would deal with, how Geographical Information System can be used as a decision support tool for planning waste management. A model is designed for the case study area in an Indian city for the purpose of planning waste management. The suggestions for amendments in the system through GIS based model would reduce the waste management workload to some extent and exhibit remedies for some of the SWM problems in the case study area. The waste management issues are considered to solve some of the present situation problems like proper allocation and relocation of waste bins, check for unsuitability and proximity convenience due to waste bin to the users, proposal of recyclable waste bins for the required areas and future suggestions. The model will be implemented on the Aurangabad city’s case study area data for the analysis and the results will suggest some modification in the existing system which is expected to reduce the waste management workload to a certain extent.</p>

Waste management is a global environmental issue which concerns about a very significant problem in today’s world. There is a considerable amount of disposal of waste without proper segregation which has lead to both economic and environment sufferings. It is still practiced in many cities. There is a tremendous amount of loss in terms of environmental degradation, health hazards and economic descend due to direct disposal of waste. It is better to segregate the waste at the initial stages where it is generated, rather than going for a later option which is inconvenient and expensive. There has to be appropriate planning for proper waste management by means of analysis of the waste situation of the area. This paper would deal with, how Geographical Information System can be used as a decision support tool for planning waste management. A model is designed for the case study area in an Indian city for the purpose of planning waste management. The suggestions for amendments in the system through GIS based model would reduce the waste management workload to some extent and exhibit remedies for some of the SWM problems in the case study area. The waste management issues are considered to solve some of the present situation problems like proper allocation and relocation of waste bins, check for unsuitability and proximity convenience due to waste bin to the users, proposal of recyclable waste bins for the required areas and future suggestions. The model will be implemented on the Aurangabad city’s case study area data for the analysis and the results will suggest some modification in the existing system which is expected to reduce the waste management workload to a certain extent.

We consume more and more which also have led to an increase in the waste we most handle. In public environment, common solution have been to increase the size of the waste bin, but that’s not always an option. To big and it may interfere with the environment it placed in. Another approach is to compress the disposed waste and so increase the waste bins capacity without increasing the volume of the wastebin itself. BigBelly is one product which have embraced this apprach. It is a solar driven compressing waste bin commonly seen in big cities around the world. The problem is that some miner municipalities and private companies still are in need of a solution but don’t have the resources to obtain BigBellys or other similar solutions. One way to approach this market is to develop a waste bin without the electric usually expensive components and develop a less expensive compressible waste bin that’s still an effective choice. To understand the needs, both of those who dispose of waste publicly but also those who manage the waste bins, have interviews, observations, questionaries and focus groups been used to gather valuable data. This data have then been remade in terms of user needs and ranked according to importance by the users themselves and the project manager. Some highly ranked needs are: the waste bin is steady and robust, the waste bin can only be opened by those who handle/empty the waste bins, a manual compression can be performed by those who throw the waste, and a manual compression can be performed without any major effort.  By the method Design by analogies and a workshop held at Luleå University of Technology was ideas created. The three concepts with the highest potential were selected via Pugh’s selection matrix and tested according to efficiency and effectivity. The concept with the highest result was developed in Simens NX a CAD-program and then used as a template for the construction of a functional prototype. By testing and analyzing the prototype a product specification could be created. The final result, which is based on the prototype and the specification, consist of two rendered waste bins, developed towards compression in public environment. The compactor is based on a scissor-lift design modified to expand and so compress waste by gravity and contract by the energy of the users. Both models are estimated to enhance the capacity of 170-200% compared with a waste bin none-compressing waste bin of the same size. Model 1 requires a force of 196N from the user during use while model 2 requires force of 123N.