Silicon Carbide (SiC), owing to its large bandgap, has proved itself to be a very viable semiconductor material for the development of extreme temperature electronics. Moreover, its electrical properties like critical field (Ecrit) and saturation velocity (vsat) are superior as compared to the commercially abundant Silicon, thus making it a better alternative for RF and high power applications. The in-house SiC BJT process at KTH has matured a lot over the years and recently developed devices and circuits have shown to work at temperatures exceeding 500˚C. However, the functional reliability of more complex circuits requires the use of simulators and device models to describe the behavior of constituent devices. SPICE Gummel Poon (SGP) is one such model that describes the behavior of the BJT devices. It is simpler as compared to the other models because of its relatively small number of parameters. A simple semi-empirical DC compact model has been successfully developed for low voltage applications SiC BJTs. The model is based on a temperature dependent SiC-SGP model. Studies over the temperature dependences for the SGP parameters have been performed. The SGP parameters have been extracted and some have been optimized over a wide temperature range and they have been compared with the measured data. The accuracy of the developed compact model based on these parameters has been proven by comparing it with the measured data as well. A fairly accurate performance at the required working conditions and correlation with the measured results of the SiC compact model has been achieved.

Enhancing performance of power electronics converters has always been an interesting topic in the power electronics community. Over the years, researchers and engineers are developing new high performance component, novel converter topologies, smart control methods and optimal design procedures to improve the efficiency, power density, reliability and reducing the cost. Besides pursuing high performance, researchers and engineers are striving to modularize the power electronics converters, which provides redundancy, flexibility and standardization to the end users. The trend of modularization has been seen in photovoltaic inverters, telecommunication power supplies, and recently, HVDC applications. A systematic optimal design approach for modular power converters is developed in this dissertation. The converters are developed for aerospace applications where there are stringent requirement on converter form factor, loss dissipation, thermal management and electromagnetic interference (EMI) performance. This work proposed an optimal design approach to maximize the nominal power of the power converters considering all the constraints, which fully reveals the power processing potential. Specifically, this work studied three-phase active front-end converter, three-phase isolated ac/dc converter and inverter. The key models (with special attention paid to semiconductor switching loss model), detailed design procedures and key design considerations are elaborated. With the proposed design framework, influence of key design variables, e.g. converter topology, switching frequency, etc. is thoroughly studied. Besides optimal design procedure, control issues in paralleling modular converters are discussed. A master-slave control architecture is used. The slave controllers not only follow the command broadcasted by the master controller, but also synchronize the high frequency clock to the master controller. The control architecture eliminates the communication between the slave controllers but keeps paralleled modules well synchronized, enabling a fully modularized design. Furthermore, the implementation issues of modularity are discussed. Although modularizing converters under form factor constraints adds flexibility to the system, it limits the design space by forbidding oversized components. This work studies the influence of the form factor by exploring the maximal nominal power of a double-sized converter module and comparing it with that of two paralleled modules. The tradeoff between modularity and performance is revealed by this study. Another implementation issue is related to EMI. Scaling up system capacity by paralleling converter modules induces EMI issues in both signal level and system level. This work investigates the mechanisms and provides solutions to the EMI problems. / Ph. D. / As penetration of power electronics technologies in electric power delivery keeps increasing, performance of power electronics converters becomes a key factor in energy delivery efficacy and sustainability. Enhancing performance of power electronics converters reduces footprint, energy waste and delivery cost, and ultimately, promoting a sustainable energy use. Over the years, researchers and engineers are developing new technologies, including high performance component, novel converter topologies, smart control methods and optimal design procedures to improve the efficiency, power density, reliability and reducing the cost of power electronics converters. Besides pursuing high performance, researchers and engineers are striving to modularize the power electronics converters, enabling power electronics converters to be used in a “plug-and-play” fashion. Modularization provides redundancy, flexibility and standardization to the end users. The trend of modularization has been seen in applications that process electric power from several Watts to Megawatts. This dissertation discusses the design framework for incorporating modularization into existing converter design procedure, synergically achieving performance optimization and modularity. A systematic optimal design approach for modular power converters is developed in this dissertation. The converters are developed for aerospace applications where there is stringent v requirement on converter dimensions, loss dissipation, and thermal management. Besides, to ensure stable operation of the onboard power system, filters comprising of inductors and capacitors are necessary to reduce the electromagnetic interference (EMI). Owning to the considerable weight and size of the inductors and capacitors, filter design is one of the key component in converter design. This work proposed an optimal design approach that synergically optimizes performance and promotes modularity while complying with the entire aerospace requirement. Specifically, this work studied three-phase active front-end converter, three-phase isolated ac/dc converter and three-phase inverter. The key models, detailed design procedures and key design considerations are elaborated. Experimental results validate the design framework and key models, and demonstrates cutting-edge converter performance. To enable a fully modularized design, control of modular converters, with focus on synchronizing the modular converters, is discussed. This work proposed a communication structure that minimizes communication resources and achieves seamless synchronization among multiple modular converters that operate in parallel. The communication scheme is demonstrated by experiments. Besides, the implementation issues of modularity are discussed. Although modularizing converters under form factor constraints adds flexibility to the system, it limits the design space by forbidding oversized components. This work studies the impact of modularity by comparing performance of a double-sized converter module with two paralleled modules. The tradeoff between modularity and performance is revealed by this study.

A continuous increase in demands from the utility grid and traction applications have steered public attention toward the integration of energy storage (ES) and hybrid ES (HESS) solutions. Modern technologies are no longer limited to batteries, but can include supercapacitors (SC) and flywheel electromechanical ES well. However, insufficient control and algorithms to monitor these devices can result in a wide range of operational issues. A modern day control platform must have a deep understanding of the source. In this dissertation, specialized modular Energy Storage Management Controllers (ESMC) were developed to interface with a variety of ES devices. The EMSC provides the capability to individually monitor and control a wide range of different ES, enabling the extraction of an ES module within a series array to charge or conduct maintenance, while remaining storage can still function to serve a demand. Enhancements and testing of the ESMC are explored in not only interfacing of multiple ES and HESS, but also as a platform to improve management algorithms. There is an imperative need to provide a bridge between the depth of the electrochemical physics of the battery and the power engineering sector, a feat which was accomplished over the course of this work. First, the ESMC was tested on a lead acid battery array to verify its capabilities. Next, physics-based models of lead acid and lithium ion batteries lead to the improvement of both online battery management and established multiple metrics to assess their lifetime, or state of health. Three unique HESS were then tested and evaluated for different applications and purposes. First, a hybrid battery and SC HESS was designed and tested for shipboard power systems. Next, a lithium ion battery and SC HESS was utilized for an electric vehicle application, with the goal to reduce cycling on the battery. Finally, a lead acid battery and flywheel ES HESS was analyzed for how the inclusion of a battery can provide a dramatic improvement in the power quality versus flywheel ES alone.