No description available.

No description available.

京都大学 / 新制・課程博士 / 博士(人間・環境学) / 甲第24711号 / 人博第1084号 / 新制||人||254(附属図書館) / 2022||人博||1084(吉田南総合図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 吉田 寿雄, 教授 田部 勢津久, 教授 中村 敏浩, 教授 田中 庸裕 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM

Cette étude vise à évaluer le rôle du silicium (Si) sur l’amélioration de la croissance et de la tolérance au cuivre (Cu) du bambou, plante utilisée en phytoremédiation. Plusieurs approches ont été choisies. Dans un premier temps, la répartition et la variabilité de Cu et Si ont été étudiées dans plusieurs espèces de bambous se développant dans un contexte pédoclimatique naturel afin d’établir des concentrations de référence pour ces éléments. Des cultures hydroponiques ont ensuite permis de caractériser de manière macroscopique la réponse des bambous à des apports de Si et Cu, et, parallèlement, d’étudier la spéciation de Cu et la localisation de Si et Cu au sein des différents organes du bambou (racines, tiges, feuilles).Les concentrations en Si et Cu présentent des différences significatives entre les principaux types de bambous, suggérant l’importance d’un caractère génotypique responsable de l’absorption de ces éléments. Face à une toxicité au cuivre, un apport de Si modifie la spéciation de Cu dans les tissus du bambou, sans toutefois améliorer significativement sa tolérance. Il apparaît que la stratégie principale du bambou pour gérer de fortes concentrations de Cu est tout d’abord une importante séquestration dans les racines, puis une complexation de Cu avec des composés soufrés organiques et inorganiques. Les résultats de cette étude permettront d’optimiser les technologies liées aux capacités épuratives des bambous face à une pollution métallique. / This study aims at assessing the role of silicon (Si) on the plant growth and alleviation of copper (Cu) toxicity in bamboos. Several approaches have been performed. Firstly, the distribution and variability of Si and Cu were investigated in several bamboo species grown under natural pedo-climatic conditions in order to obtain reference values for Cu and Si in bamboos. Secondly, hydroponic experiments were carried out to characterize the macroscopic response of bamboo plants exposed to Si and Cu and, investigated in parallel the Cu speciation and Si and Cu localisation in different part of bamboos (roots, stems, leaves).Significant differences were measured between bamboo species, suggesting that a genotypic character may be responsible for Si and Cu accumulation. Silicon supplementation modified the Cu speciation but did not induce significant improvement of Cu tolerance. The main strategy of bamboo to cope with high Cu concentrations in its tissues is initially an important sequestration in the roots apoplast, mainly in epidermis, and then a Cu complexation with organic and inorganic sulphur compounds. These results will allow the optimisation of phytoremediation processes using bamboo plants.

Mining areas produce large amounts of waste that are important sources of potentially toxic elements (PTE), such as heavy metals. These PTEs can contaminate the environment and cause serious threats to the ecosystem and human health. The in-situ remediation by the addition of amendments is an efficient alternative for the immobilization of contaminants and for reduction of the risks associated with these pollutants. Phosphate, lime, and organic compounds are the most used amendments for in-situ remediation. We evaluated the effect of rates of amendments in desorption kinetics and speciation of Zn, Cd, and Pb in a soil contaminated by mining activities. The soil was collected in a disabled Zn mining area in the city of Vazante, state of Minas Gerais, Brazil. The contaminated soil was incubated with either phosphate, or calcium carbonate, or biochar, or biosolid. Desorption kinetics was evaluated by the \"stirred-flow\" method that consists of a constant flow with a Mehlich-3 solution. The speciation was performed by X-ray absorption spectroscopy (XAS) and sequential extraction. The analysis with synchrotron radiation X-ray absorption near the edge (XANES) was performed for Pb and Zn. We also performed a mapping by μ-XRF (micro X-ray fluorescence) and in some spots on the map we performed the speciation by μ-XANES for Zn in the soil amended with phosphate. An experiment with columns was carried out with samples from the soil amended with phosphate to evaluate leaching of Zn, Pb, and Cd. The treatment with phosphate affected the species of Zn. However, some Zn species that were formed and can be mobilized most easily. Zn was more easily mobilized in the highest rate of phosphate probably because of the decrease of the pH. The treatments with biosolid, biochar and calcite did not change Zn species. However, in some rates, Zn desorption decreased while Zn contents increased in the recalcitrant fraction. The main species in the unamended soil was Pb-bentonite and anglesite. The soil amended with calcite and pyromorphite decreased the desorption kinetics of Pb and increased the Pb extracted in the residual fraction, and this could be due to formation of pyromorphite. The soil amended with biosolid and biochar increased the Pb extracted in the organic fraction and decreased in the residual fraction. In these treatments part of the species of Pb present on this soil was transformed in Pb-citrate. The addition of biochar and biosolid increased the desorption kinetics of Pb in all rates applied. The treatment with either biochar or biosolid was effective to decrease the Cd desorption. In these organic amendments, the content of Cd associated to organic matter (OM)increased. The treatments with phosphate and calcite also increased the Cd associated to OM extracted in the F3. These inorganic amendments were effective to decrease the desorption kinetics of Cd. / Áreas de mineração produzem grandes quantidades de resíduos que são importantes fontes de elementos potencialmente tóxicos (EPT), tais como os metais pesados. Esses EPTs podem contaminar o meio ambiente e causar sérias ameaças ao ecossistema e à saúde humana. A remediação in-situ pela adição de condicionadores é alternativa eficiente para a imobilização de contaminantes e para redução dos riscos associados a esses poluentes. Fosfato, calcita e compostos orgânicos são os condicionadores mais utilizadas para remediação in-situ. Neste estudo foi avaliado o efeito da aplicação de condicionadores na cinética de dessorção e especiação de Zn, Cd e Pb em um solo contaminado por atividades de mineração. O solo foi coletado em uma área desativada de mineração de Zn, localizada na cidade de Vazante, MG. A solo contaminado foi incubado com fosfato, carbonato de cálcio, biocarvão ou biossólido. A cinética de dessorção foi avaliada pelo método fluxo constante com a solução de Mehlich-3. A especiação foi realizada por espectroscopia de absorção de raios-x (XAS) e extração sequencial, enquanto a análise absorção de raios-x próxima da borda (XANES) foi realizada para Pb e Zn. Também realizamos o mapeamento por μ-XRF (microfluorescência de raios-x) e em alguns pontos no mapa realizamos a especiação por μ-XANES do Zn no solo tratado com fosfato. Foi também conduzido um experimento com colunas para avaliar a lixiviação de Zn, Pb e Cd no solo tratado com fosfato. A adição de fosfato afetou as espécies de Zn. No entanto, algumas espécies de Zn que foram formadas e assim podem ser mobilizadas com mais facilidade. O Zn foi mais facilmente mobilizado na maior taxa de fosfato, provavelmente devido à diminuição do pH. Os tratamentos com biossólido, biocarvão e calcita não alteraram as espécies de Zn. No entanto, em algumas doses, a dessorção de Zn diminuiu, enquanto o teor de Zn aumentou na fração recalcitrante. As principais espécies no solo sem alterações foram a bentonita Pb e a anglesita. O solo corrigido com calcita diminuiu a cinética de dessorção do Pb e aumentou o Pb extraído na fração residual, o que pode ser devido à formação de piromorfita. Os solos tratados com biossólido e com biocarvão aumentaram o teor de Pb associado à matéria orgânica e diminuíram na fração residual. Nestes tratamentos parte das espécies de Pb presentes neste solo foi transformada em Pb ligado a citrato. Essas alterações orgânicas aumentaram substancialmente a cinética de dessorção do Pb em todas as doses adicionadas. Os tratamentos com biocarvão e com biossólido foram efetivos para diminuir a dessorção de Cd. Nestas alterações orgânicas o Cd associado à matéria orgânica aumentou. Os tratamentos com fosfato e calcita também aumentaram o teor de Cd na fração orgânica. Essas alterações inorgânicas também foram eficazes para diminuir a cinética de dessorção do Cd.

O presente trabalho teve como objetivo o estudo das propriedades elétricas e estruturais das amostras cerâmicas pertencentes ao sistema Ba1-xRxTi1-yZryO3 (R=Ca,Sr). As amostras na forma de pó micro ou nanoestruturadas foram respectivamente obtidas através do método de mistura de óxidos e do método dos precursores poliméricos. Amostras cerâmicas apresentando grãos em uma escala micrométrica foram obtidas através do método tradicional de sinterização em alta temperatura enquanto amostras cerâmicas nanoestruturadas foram obtidas através da técnica de sinterização por plasma (Spark plasma Sintering ou SPS). Os resultados obtidos através da técnica de espectroscopia de impedância mostraram que com o aumento da quantidade de Zr na matriz as amostras passam de um estado ferroelétrico normal para um estado ferroelétrico relaxor e que este efeito é mais pronunciado nas amostras contendo cálcio. A partir dos resultados da difração de raios X em alta resolução, foi possível determinar os processos de transição de fase em função da substituição dos átomos de Ti por Zr além de identificar um processo de transição de fase espontânea na amostra contendo cálcio e 18 mol % de zircônia. Através das medidas do espectro de absorção de raios X e do espectro Raman foi possível mostrar que, independente da composição e da estrutura a longa distancia, apresentam certo grau de desordem local e que esta desordem local está principalmente associada ao fato do átomo de titânio estar fora de sua posição centro simétrica no octaedro TiO6 e que está desordem é comparável a observada no composto BaTiO3 tetragonal. A desordem química devido ao aumento da quantidade de átomos de Zr na matriz associada a esta desordem local levam ao aparecimento do estado relaxor. Finalmente, o estudo das amostras preparadas por SPS mostraram que é possível obter amostras de composição BaTi0,80Zr0,20O3 apresentando uma alta densidade e tamanho de grão nanométrico. Os resultados da espectroscopia de impedância destas amostras mostraram devido ao pequeno deslocamento da temperatura de máximo e do alargamento da curva de permissividade com a diminuição do tamanho de grão, não foi possível classificar essa amostra como apresentando um comportamento típico de um material ferroelétrico relaxor. / This work aimed to study the structural and electrical properties of ceramic samples belonging to the Ba1-xRxTi1-yZryO3 (R = Ca, Sr) system. The powder samples presenting a micro or nanosize were respectively obtained by using a mixture of oxides and by the modified polymeric precursor methods. Micrometer scale ceramic samples were obtained through the traditional method of sintering at high temperature while nano-sized particles ceramics were obtained using the spark Spark Plasma Sintering (SPS) technique. The results obtained using the technique of impedance spectroscopy showed that with an increasing amount of Zr in the matrix, samples change from a normal ferroelectric state to a relaxor ferroelectric state and that this effect is more pronounced in samples containing calcium. From the results of high resolution X-ray diffraction technique, it was possible to determine the phase transition processes due to the substitution of Ti atoms by Zr and, in addition, identify a process of spontaneous phase transition in the sample containing calcium and 18 mol% of zirconium. From the measurements of X-ray absorption Spectroscopy and Raman spectra it was possible to show that regardless of the composition and structure of long range order, the samples have some degree of local disorder and that this local disorder is primarily associated with the fact that the titanium atom being out of its symmetrical center position in the octahedron and is TiO6 disordered. This is comparable to the distorsion observed in tetragonal BaTiO3 sample. The chemical disorder due to the increase of Zr atoms in the matrix associated with this disorder is responsible of the occurrence of relaxor state. Finally, the study of samples prepared by SPS showed that it is possible to obtain samples with BaTi0,80Zr0,20O3 composition with a high-density and nanometeric grain size. The results of impedance spectroscopy on these samples show a small shift of the maximum temperature and a slight broadening of the permittivity curve with decreasing grain size. However, this result does not allowed to classify the samples as having a typical relaxor ferroelectric material behavior.

Made available in DSpace on 2014-12-17T15:41:47Z (GMT). No. of bitstreams: 1 WashingtonCMGpdf.pdf: 1072479 bytes, checksum: d37434aed1d2ae898ee7a9fd3701e0d7 (MD5) Previous issue date: 2009-04-29 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / This work deals with the application of X-Ray Absorption Spectroscopy on the study of the behavior of Cu2+ ions in inverse micelles. The formation of copper nanoparticles in water-in-oil microemulsions in pseudo-ternary systems of cetyl trimethylammonium Bromide (CTAB) surfactant, butanol co-surfactant, heptane as oil phase and aqueous solutions of CuSO4.5H2O, and NaBH4. The microemulsions were prepared with a fixed percentage (60 %) of oil phase and a variable water to tensoative proportion. It was observed an increase on Cu2+ reduction by the sodium borohydride in microemulsions with 13 % of aqueous phase, independent of the reaction time. For the microemulsions in which the aqueous phase is composed only by the CuSO4 solution, it was observed that the color of the solution depends on the water to surfactant ratio. These changes in color were attributed to a competition for the hidratation water between the polar head of the tensoative and Cu2+ ions with the eventual substitution of oxygen by bromine atoms in the first coordination shell of Cu2+ ions / Neste trabalho estudou-se aplica??o da espectroscopia de absor??o de raios x no estudo do comportamento dos ?ons Cu2+ em micelas inversas. Estudou-se a forma??o de nanopart?culas de cobre em microemuls?es ?gua-em-?leo de sistemas pseudo-tern?rios tensoativo (brometo de hexadeciltrimetilam?nio, CTAB)-cotensoativo (butanol) / fase oleosa (heptano) / fase aquosa (solu??es de CuSO4.5H2O, e NaBH4). As microemuls?es foram preparadas fixando em 60% a fase ?leo (Heptano) e variando 40% de fase aquosa com tensoativo/cotensoativo na mesma propor??o, sendo que a fase aquosa do agente redutor NaBH4 foi usada em excesso de 0,4 mol.L-1 e 0,8 mol.L-1 em rela??o 0,2 mol.L-1 de fase aquosa de CuSO4.5H2O. Observou-se uma maior redu??o dos ?ons Cu2+ pelo boridreto de s?dio em microemuls?es com 13% de ?gua, independente do tempo de rea??o. Para as microemuls?es em que a fase aquosa corresponde a solu??o de CuSO4, observou-se uma depend?ncia na colora??o em fun??o da rela??o entre as concentra??es de ?gua/tensoativo. Essa mudan?a de colora??o foi atribu?da a uma competi??o pelas mol?culas de ?guas entre a cabe?a polar do tensoativo e os ?ons Cu2+ com uma eventual substitui??o do oxig?nio da primeira esfera de coordena??o por bromo

<p>Water is one of the most common compounds on earth and is essential for all biological activities. Water has, however, been a mystery for many years due to the large number of unusual chemical and physical properties, e.g. decreased volume during melting and maximum density at 4 °C. The origin of the anomalies behavior is the nature of the hydrogen bond. This thesis will presented an x-ray absorption spectroscopy (XAS) study to reveal the hydrogen bond structure in liquid water.</p><p>The x-ray absorption process is faster than a femtosecond and thereby reflects the molecular orbital structure in a frozen geometry locally around the probed water molecules. The results indicate that the electronic structure of liquid water is significantly different from that of the solid and gaseous forms. The molecular arrangement in the first coordination shell of liquid water is actually very similar as the two-hydrogen-bonded configurations at the surface of ice. This discovery suggests that most molecules in liquid water have two-hydrogen-bonded configurations with one donor and one acceptor hydrogen bond compared to the four-hydrogen-bonded tetrahedral structure in ice. This result is controversial since the general picture is that the structure of liquid water is very similar to the structure of ice. The results are, however, consistent with x-ray and neutron diffraction data but reveals serious discrepancies with structures based on current molecular dynamics simulations. The two-hydrogen-bond configuration in liquid water is rigid and heating from 25 °C to 90 °C introduce a minor change in the hydrogen-bonded configurations. Furthermore, XAS studies of water in aqueous solutions show that ion hydration does not affect the hydrogen bond configuration of the bulk. Only water molecules in the close vicinity to the ions show changes in the hydrogen bond formation. XAS data obtained with fluorescence yield are sensitive enough to resolved electronic structure of water molecules in the first hydration sphere and to distinguish between different protonated species. Hence, XAS is a useful tool to provide insight into the local electronic structure of a hydrogen-bonded liquid and it is applied for the first time on water revealing unique information of high importance.</p>

<p>This thesis is based on experimental studies in chemical physics. Titanium dioxide (TiO₂) and phthalocyanine’s (Pc’s), interesting in many future perspectives, have been deposited as thin films and studied as follows. Information has been obtained on e.g. molecular orientation, crystal structure, depth profile of the chemical composition, electrochemical properties and electronic structure. This has been achieved by means of a combination of techniques: X-ray photoelectron spectroscopy (XPS), near edge x-ray absorption fine structure (NEXAFS), density functional theory calculations (DFT), UV-visible absorption spectroscopy (UVVIS) and cyclic voltammetry (CV).</p><p>Metal-free phthalcyanine (H₂Pc) has been shown to form films with different crystal structure and molecular orientation depending on deposition method, evaporation/sublimation or powder deposition, on commercial conducting glass (fluorine doped tin oxide, FTO), which is used e.g. in solar cells and organic light emitting devices (OLEDs). The unoccupied molecular orbitals are divided in x, y and z space coordinates of the molecule and also divided in inequivalent nitrogen components. </p><p>The electronic structure is also studied for a sublimated titanyl phthalocyanine (TiOPc) film and related to the metal-free phthalocyanine. The ligand field around the titanium atom in TiOPc is compared with that of TiO₂ to delineate the unoccupied levels recorded by means of x-ray absorption spectroscopy.</p><p>Nanostructured TiO₂ films were manufactured by screen printing/doctor blading on FTO. Such films were additionally covered with lutetium diphthalocyanine (LuPc₂) by means of surface assembly from solution. LuPc₂^-, LuPc₂⁺ and LuPc₂H were identified and the stability of the electrochromic reactions in this system was monitored.</p><p>Chemical vapor deposition (CVD) has been used to grow nanometer sized anatase TiO₂ crystals on pre-oxidized Si (111) without formation of interfacial carbon and with an interface layer of the size of 15- 25Å. The interface layer was found to be amorphous TiSi_xO_y with graded stoichiometry. </p>

<p>The subjects of the thesis are theoretical first principles calculations of X-ray absorption (XA) spectra and current induced spin transfer torque. XA spectra calculated from atomic multiplet theory and from band structure calculations, based on density functional theory for La_0.7Sr_0.3MnO₃ have been compared to experiment. The comparison shows that the effect of the core hole created in the XA process must be considered in the calculation. The theory by Mahan, Nozières and De Dominicis (MND) of dynamical core hole screening is generalised to multiband systems and implemented in first principle calculations. Calculations of the XA spectrum of graphite, including dynamical core hole screening, are shown to better reproduce the relative intensity of the peaks in the experimental spectrum compared to static calculations based on the local density of state of a core excited atom. In combination with experiments the developed method to calculate XA spectra is used to investigate the electronic structure of mixed valent Yb, hydrogen storage in carbon nanotubes and the structure of liquid water. Moreover, a method to calculate the current induced spin transfer torque in materials with a helical spin density wave from first principles has been developed. The method is applied to rare earth metals and it is shown that a current along the axis of spin rotation induces a torque which gives rise to a rotation of the magnetisation direction.</p>