Les sources de rayonnement synchrotron sont en constante évolution afin de fournir aux scientifiques, un faisceau de rayons-X plus intense et plus cohérent. Ces évolutions requièrent une augmentation du champ fournit par les structures multipolaires utilisés dans la maille de l'accélérateur pour focaliser le faisceau d'électrons. Ceci conduit à un intérêt grandissant pour la technologie à aimants permanent car elle permettrait d'obtenir des structures multipolaires plus performantes et plus compactes. De plus cette solution est attractive car elle ne consomme pas d'énergie électrique contrairement à la technologie résistive conventionnelle. Néanmoins la réalisation des structures à aimant permanent est plus complexe lorsqu'une bonne qualité de champ est nécessaire à cause des erreurs d'assemblage de la structure.Une structure innovante d'un quadripôle à aimant permanent à été développé pour la future machine de l'ESRF. Cette structure est composée de pièces ferromagnétiques et d'aimants permanents. Malgré sa simplicité et sa compacité, celle-ci est très performante car elle fournit une composante multipolaire intense ainsi qu'une qualité de champ conforme aux spécifications rigoureuses. Un logiciel de calcul magnétostatique à permis d'optimiser la structure et un prototype à été construit et caractérisé par notre équipe. L'impact des erreurs d'assemblage sur la qualité du champ à été corrigé grâce à des pièces ferromagnétiques permettant de modifier localement le champ du prototype. Les résultats obtenus en accord avec les prévisions du modèle démontrent la faisabilité d'une telle structure pour les futures sources de lumière synchrotron. / Storage ring light sources are in constant improvement in order to increase the intensity and the coherence of the X-rays beams. These improvements require stronger multipoles magnet in the accelerator lattice. To reach such strength, the magnets apertures are significantly reduced. The reduction of magnet apertures makes the permanent magnet technology very attractive for some magnets provided that they are limited field tuning. Indeed, introduction of PMs structures may lead to better performances for a more compact design. Furthermore, with this technology running cost can be very low.A simple PM based high gradient quadrupole prototype has been built and magnetically characterized. This magnetic structure results from a compromise between performance and technological complexity. It includes simple soft iron parts and PMs blocks. A suitable field quality was obtained with an optimized pole shape. Mechanicals errors during assembly are corrected with shims to reach the required field quality.

Made available in DSpace on 2014-10-09T12:34:00Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:01:07Z (GMT). No. of bitstreams: 0 / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:26:15Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:09:38Z (GMT). No. of bitstreams: 0 / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:34:00Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:01:07Z (GMT). No. of bitstreams: 0 / O trabalho teve como objetivo a investigação de Metodologias de Cálculo dos Reatores Subcríticos acionados por fonte externa de nêutrons, tais como, \"Accelerator Driven Subcritical Reactor\" (ADSR) e \"Fusion Driven Subcritical Reator\" (FDSR) , que são reatores nucleares subcríticos com uma fonte externa de nêutrons. Tais nêutrons são produzidos, no caso do ADSR, através da interação de partículas aceleradas (prótons, deutério) com um alvo (Pb, Bi, etc) ou através das reações de fusão, no caso do FDSR. Este conceito de reator vem sendo objeto de intensa pesquisa, sobretudo pela possibilidade de ser utilizado para transmutar o enorme inventario de rejeitos nucleares, principalmente os transurânicos (TRU) e os produtos de fissão de meia-vida longa (LLFP). Neste trabalho enfatiza os seguintes aspectos: (i) complementar e aprimorar a metodologia de cálculos neutrônicos com queima e transmutação e implementá-la computacionalmente; (ii) e utilizando esta metodologia, participar dos Projetos Coordenados de Pesquisa (CRP) da Agência Internacional de energia Atômica \"Analytical and Experimental Benchmark Analysis of ADS\" e \"Collaborative work on use of LEU in ADS\", principalmente na reprodução dos resultados experimentais da instalação subcrítica Yalina Booster e também no cálculo de um núcleo subcrítico do reator IPEN/MB-01, (iii) analisar comparativamente diferentes bibliotecas de dados nucleares, no cálculo de parâmetros integrais (keff), diferenciais (espectro, fluxo) e de queima e transmutação (inventário ao final do ciclo) e (iv) aplicar a metodologia desenvolvida em um estudo que possa ajudar na escolha futura de um sistema transmutador dedicado. Foram utilizados para tanto os seguintes códigos: MCNP (Transporte de partículas por Monte Carlo), MCB (acoplamento do MCNP com código de transmutação) e o sistema NJOY para o processamento dos arquivos de dados nucleares avaliados. / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Made available in DSpace on 2014-10-09T12:26:15Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:09:38Z (GMT). No. of bitstreams: 0 / Este trabalho apresenta um estudo da Física dos Sistemas dirigidos por Fontes Externas (ADS). É apresentada a definição de alguns parâmetros estáticos e cinéticos da Física do reator que são importantes na avaliação e definição destes sistemas. O objetivo é demonstrar que há diferenças nestes parâmetros quando o sistema está no nível crítico ou subcrítico. Além disso, o trabalho mostra as diferenças observadas nos parâmetros para diferentes modelos de cálculo. São mostradas nesta dissertação duas metodologias de cálculo: Gandini&Salvatores e Dulla e são calculados alguns destes parâmetros utilizando as duas metodologias. O código determinístico de transporte ANISN é utilizado no cálculo destes parâmetros. Numa configuração subcrítica do Reator IPEN/MB-01 dirigido por uma fonte externa de nêutrons são calculados alguns parâmetros físicos. No final do trabalho são apresentadas as conclusões obtidas através destes cálculos. / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Neste trabalho apresentamos um estudo das reações nucleares de alta energia que são fundamentais na definição do termo fonte dos reatores nucleares subcríticos acionados por fonte externa. Estas reações nucleares, também conhecidas como \"spallation\", consistem na interação de hádrons de alta energia com os núcleons do núcleo atômico. A fenomenologia destas reações consiste em duas etapas, sendo que à primeira, o próton interage através de espalhamentos múltiplos, em um processo denominado cascata intra-nuclear seguido da etapa na qual o núcleo excitado oriundo da cascata intranuclear ou evapora partículas de forma a atingir estados energéticos moderados ou fissiona, em um processo conhecido como competição entre evaporação e fissão. Neste trabalho os principais modelos nucleares, os modelos de Bertini e Cugnon, são revistos, pois estes modelos são fundamentais para propósito de projeto devido à falta de dados nucleares avaliados para estas reações. A implementação e validação dos métodos de cálculo para o projeto destas fontes são realizadas. A implementação da metodologia é realizada utilizando o programa MCNPX ( \"Monte Carlo N-Particle eXtended\"), dedicado para cálculos de transporte destas partículas e a validação é realizada mediante uma cooperação internacional junto a um projeto coordenado de pesquisa da Agencia Internacional de Energia Atômica e trabalhos disponíveis. O objetivo é qualificar os cálculos relacionados às reações nucleares e os canais de desexcitação envolvidos. O CRISP, um código nacional para a descrição da fenomenologia das reações envolvidas, também foi estudado e os modelos implementados no código foram revistos e melhorados de forma a dar continuidade ao seu processo de qualificação. Devido às limitações dos principais modelos na descrição de produção de nuclídeos leves, a reação de multi-fragmentação foi estudada. As discrepâncias nos cálculos de produção destes nuclídeos são atribuídas à falta do canal de multi-fragmentação estatística do núcleo. A implementação deste canal foi realizada para a aplicação em reações de altas energias junto ao código CRISP de forma a reproduzir a produção de nuclídeos leves, bem como sua validação mediante a comparação com dados experimentais disponíveis para este fenômeno, obtendo com isso uma melhor reprodução de todo o espectro de produção de nuclídeos do processo. / This work presents a study of high energy nuclear reactions which are fundamental to dene the source term in accelerator driven systems. These nuclear reactions, also known as spallation, consist in the interaction of high energetic hadrons with nucleons in the atomic nucleus. The phenomenology of these reactions consist in two step. In the rst, the proton interacts through multiple scattering in a process called intra-nuclear cascade. It is followed by a step in which the excited nucleus, coming from the intranuclear cascade, could either, evaporates particles to achieve a moderate energy state or ssion. This process is known as competition between evaporation and ssion. In this work the main nuclear models, Bertini and Cugnon are reviewed, since these models are fundamental for design purposes of the source term in ADS, due to lack of evaluated nuclear data for these reactions. The implementation and validation of the calculation methods for the design v of the source is carried out to implement the methodology of source design using the program MCNPX (Monte Carlo N-Particle eXtended), devoted to calculation of transport of these particles and the validation performed by an international cooperation together with a Coordinated Research Project (CRP) of the International Atomic Energy Agency and available jobs, in order to qualify the calculations on nuclear reactions and the de-excitation channels involved, providing a state of the art of design and methodology for calculating external sources of spallation for source driven systems. The CRISP, is a brazilian code for the phenomenological description of the reactions involved and the models implemented in the code were reviewed and improved to continue the qualication process. Due to failure of the main models in describing the production of light nuclides, the multifragmentation reaction model was studied. Because the discrepancies in the calculations of production of these nuclides are attributes to the lack of reaction channel and the implementation of this channel was carried out for applications in high energy reactions with the CRISP code to reproduce the production of light nuclides, as well, as its validation by comparison with experimental data available for this phenomenon. Thus, obtaining a better reproduction of the whole spectrum of production of nuclides in the process.

There is a lot of applications for DSPs (Digital Signal Processor) in the most rapidly growing areas in the industry right now as wireless communication along with audio and video products are getting more and more popular. In this report, a DSP, developed at the division of Computer Engineering at the University of Linköping, is optimized and verified. Register Forwarding was implemented on a general architecture level to avoiddata hazards that may arise when implementing instruction pipelining in a processor. The very common FFT algorithm is also optimized but on instruction setlevel. That means the algorithm is carefully analyzed to find operations that mayexecute in parallel and then create new instructions for these parallel operations.The optimization is concentrated on the butterfly operation as it is such a majorpart of the FFT computation. Comparing the accelerated butterfly with the unaccelerated gives an improvement of 30% in terms of clock cycles needed for thecomputation. In the report there are also some discussions about the benefits and drawbacksof changing from a hardware to a software stack, mostly in terms of interrupts andthe return instruction. Another important property of the processor is scalability. That is, it is possibleto attach extra peripherals to the core, which accelerates certain tasks. Aninterface towards these peripherals is developed along with two template designsthat may be used to develop other peripherals. After all these modifications, a new test bench is developed to verify the functionality.

This research presents the results of a qualitative and quantitative investigation into what factors are present at time zero that increase the probability that a startup will achieve long term sustainability. Survival rates for startups in the United States (U.S.) are disappointingly low and economically inefficient. The data shows that the U.S. clearly lags its peer countries in the survival rates of startups. The U.S ranked an unacceptable 11th of 14 among its peer countries in first-year survival rates in recent years. Startup failure does not only impact the entrepreneur; it also impacts creditors, vendors, community stakeholders, and employees. While it is commonly acknowledged that entrepreneurial businesses contribute to economic growth, the influential impact survival can have on economic growth within the community is often understated. The economic impact of startups on the community makes this area of research even more vital. To avoid failure and improve the sustainability of startups requires an in-depth understanding of the factors that are causal and non-causal to sustainability. While there has been significant investment and support by communities, government, and private foundations, startup failure rates remain virtually unchanged in the last two decades. Despite the many years of research in the field of entrepreneurship, U.S. failure rates within the first five years’ average 53%, regardless of the industry membership or economic cycles. Identifying factors that are causal and non-causal to the sustainability of emerging businesses is crucial to the founders and stakeholders. Within this study, both internal and external factors that may be causal to the macro survival rate of U.S. startups were studied. The external factors were studied quantitatively, using data published by the Bureau of Labor Statistics (BLS), Federal Reserve Economic Data (FRED) and the Brookings Institute. A protocol of regression analysis and visual analytics were applied to evaluate the quantitative data. It demonstrated that external factors such as the change in real gross domestic product (RGDP), interest rates, and expansion of accelerators have had no significant effect on U.S. macro startup survival rates. Further, the findings confirm that neither geographic location nor industry membership impacted U.S. macro startup survival rates. Internal factors were studied qualitatively, using a grounded theory protocol. The qualitative research did uncover three internal factors that were causal to survival of the startups studied. Those internal factors were:  Career Autonomy – The entrepreneurs motivated by career autonomy were significantly more likely to achieve long-term sustainability.  Allies – The entrepreneurs who identify and utilized allies were more likely to survive.  Purposeful Margin of Safety model – Startups whose founders had a rigorous understanding of the margin of safety (MOS) and its underlying elements of pricing and break-even analysis were more likely to survive. This qualitative study provides significant evidence that, when these three causal factors are present, the likelihood of sustainability is high. These findings extend our knowledge on how to improve the probability of sustainability for the firms. This study demonstrates that the U.S. can and should improve its startup survival rates by focusing on the internal factors that are necessary at time zero to ensure sustainability and survival.

The dissemination of various types of data faces ongoing challenges with the growing need of accessing manifold information. Since the interest in content is what drives data networks, some new technologies and thoughts attempt to cope with these challenges by developing content-based rather than address-based architectures. The Publish/ Subscribe paradigm can be a promising approach toward content-based data dissemination, especially that it provides total decoupling between publishers and subscribers. However, in content-based publish/subscribe systems, subscriptions are expressive and the information is often delivered based on the matched expressive content - which may not deeply alleviate considerable performance challenges. This dissertation explores a hardware solution for disseminating data in content-based publish/subscribe systems. This solution consists of an efficient hardware architecture of an XML/XPath broker that can route information based on content to either other XML/XPath brokers or to ultimate users. A network of such brokers represent an overlay structure for XML content-based publish/subscribe data dissemination systems. Each broker can simultaneously process many XPath subscriptions, efficiently parse XML publications, and subsequently forward notifications that result from high-performance matching processes. In the core of the broker architecture, locates an XML parser that utilizes a novel Skeleton CAM-Based XML Parsing (SCBXP) technique in addition to an XPath processor and a high-performance matching engine. Moreover, the broker employs effective mechanisms for content-based routing, so as subscriptions, publications, and notifications are routed through the network based on content. The inherent reconfigurability feature of the broker’s hardware provides the system architecture with the capability of residing in any FPGA device of moderate logic density. Furthermore, such a system-on-chip architecture is upgradable, if any future hardware add-ons are needed. However, the current architecture is mature and can effectively be implemented on an ASIC device. Finally, this thesis presents and analyzes the experiments conducted on an FPGA prototype implementation of the proposed broker/router. The experiments tackle tests for the SCBXP alone and for two phases of development of the whole broker. The corresponding results indicate the high performance that the involved parsing, storing, matching, and routing processes can achieve.

[EN] The Compact Linear Collider (CLIC) is an electron-positron collider conceived for the study of High-Energy Physics in the TeV center of mass energy region, is based on a two-beam operation principle: instead of using active elements (klystrons), the necessary RF power to accelerate the Main Beam (MB) is obtained from the deceleration of a high-current, moderate energy Drive Beam (DB) in the so-called Power Extraction and Transfer Structures (PETS). These structures emit an RF signal of about 130 MW power at 12 GHz. As this frequency is above the cut-o ff frequency of the fundamental mode for the specified beam pipe dimensions (7.6 GHz), the inference propagates from the PETS to the neighboring devices, including the Beam Position Monitors (BPM). According to the CLIC Conceptual Design Report (CDR), an ef ficient beam position monitoring system for the CLIC DB decelerator needs to meet the following requirements: - It should be as simple and economic as possible, as 41580 units are required, amounting to 75% of all CLIC BPMs. - The signal processing scheme should not be a ffected by the PETS interference. This rules out processing the signals at the beam bunching frequency (12 GHz). - The resulting position signal should detect changes in the beam position whose duration is 10 ns or longer. - The required spatial resolution is 2 um for a 23 mm diameter vacuum pipe. - Wide dynamic range: the electronic acquisition system must be able to process signals with extreme levels, induced by either very high (100 A) or very low (3 A) current beams. This PhD thesis describes the electromagnetic and mechanical design of the first prototype BPM developed for the CLIC Drive Beam and its characterization tests in laboratory and with beam. The first two chapters introduce the CLIC project and review the state-of-the-art beam position monitoring techniques. Chapter 3 presents the design of the BPM. The stripline technology has been selected, as it is the only one among the most commonly used BPM techniques to present a suitable frequency response to filter out the RF interference caused by the PETS. Choosing an appropriate length for the electrodes, it is possible to tune one the periodic notches in the stripline frequency response to 12 GHz. The influence of di erent electromagnetic and geometrical aspects is also studied, such as beam coupling impedance or the ratio between longitudinal and transverse dimensions. The design of the electronic acquisition system is presented in Chapter 4, considering the project requirements in terms of resolution (2 u m), accuracy (20 um) and time resolution (10 ns). Due to the high amount of units required, the number of electronics components has been minimized. As the designed signal processing scheme is based on charge integration, it can be adapted to di erent stripline pick-ups by simply modifying the attenuator settings according to the required output signal levels. The laboratory characterization tests of the prototype stripline BPM, in the low and the high frequency ranges, performed with a thin wire and a coaxial waveguide, respectively, are described in Chapter 5. The measurement results are compared with the theoretical estimation and the electromagnetic field simulations. In addition, the high-frequency test reveals that the first prototype stripline BPM does not provide su cient suppression of the 12 GHz PETS RF interference. An additional study proposed several modifications and guidelines for a second prototype stripline BPM. Finally, Chapter 6 presents the beam tests of the prototype stripline BPM at the CLIC Test Facility 3 (CTF3) in the Test Beam Line (TBL), a scaled version of the CLIC Drive Beam decelerator. Two types of tests were performed: linearity/sensivity and resolution. These results are compared to the ones in the laboratory characterization tests. An upper bound of the resolution is estimated performing a Singular Value Decomposition (SVD) analysis. / [ES] El Colisionador Lineal Compacto (Compact Linear Collider, CLIC), un colisionador de electrones y positrones concebido en el CERN para el estudio de la Física de Altas Energías en la región de los TeV, se basa en un principio de funcionamiento de doble haz: en lugar de emplear elementos activos (klystrons) para proporcionar la potencia RF requerida para acelerar el haz principal (Main Beam, MB), ésta se obtiene de la deceleración de un haz secundario (Drive Beam, DB), de alta corriente y energía moderada, en las llamadas estructuras de extracción y transferencia de potencia (Power Extraction and Transfer Structures, PETS). Estas estructuras emiten una señal interferente RF de más de 130 MW de potencia a 12 GHz, que, por estar localizada en una frecuencia superior a la de corte del modo fundamental en el tubo de vacío del haz (7.6 GHz), se propaga por éste hacia los dispositivos adyacentes, entre los cuales se encuentran los sistemas de monitorización de la posición (Beam Position Monitor, BPM). De acuerdo con el informe conceptual de diseño de CLIC (Conceptual Design Report, CDR) , un sistema eficiente de monitorización de la posición del haz en el decelerador del haz secundario deberá cumplir los siguientes requisitos: - Debe ser lo más sencillo y económico posible, ya que se precisan 41580 unidades: el 75% de todos los BPMs de CLIC. - El procesado de señal en el sistema de adquisición deberá ser inmune a la interferencia generada en las PETS. Esto excluye la solución habitual de procesar las señales del BPM a la frecuencia de pulsado del haz (12 GHz). - La señal de posición resultante del procesado debe ser capaz de detectar cambios en la posición del haz de duración igual o mayor a 10 ns (resolución temporal). - La resolución espacial requerida es de 2 um para un tubo de vacío de 23 mm de diámetro, con una calibración precisa. - Amplio rango dinámico: el sistema electrónico de adquisición del BPM debe poder resistir los altos valores de señal provocados por los casos de desviación extrema del haz nominal (se contempla una desviación máxima de la mitad del radio del tubo), así como detectar las señales inducidas por las configuraciones de haz con menor carga de todas las previstas, cuyos niveles serán muy débiles. / [CAT] El Col·lisionador Lineal Compacte (Compact Linear Collider, CLIC), un col·lisionador d'electrons i positrons concebut per l'estudi de la Física d'Altes Energies a la regió dels TeV (energía del centre de massa), es basa en un principi de funcionament de doble feix:en lloc de fer servir elements actius (klystrons) per proporcionar la potència RF requerida per accelerar el feix principal (Main Beam, MB), aquesta s'obtè de la desacceleració d'un feix secundari (Drive Beam, DB), d'alt corrent i energia moderada, a les anomenades estructures d'extracció i transferència de potència (Power Extraction and Transfer Structures, PETS). Aquestes estructures emeten una senyal interferent RF de més de 130 MW de potència a 12 GHz, que, pel fet d'estar localitzada a una freqüència superior a la de tall del mode fonamental al tub de buit del feix (7.6 GHz), es propaga a través d'aquest fins els dispositius adjacents, entre els quals trobem els sistemes de monitorització de la posició (Beam Position Monitor, BPM). D'acord amb l'informe conceptual de disseny de CLIC (Conceptual Design Report, CDR), un sistema eficient de monitorització de la posició del feix al desaccelerador del feix secundari haurà de complir els següents requisits: ¿ - Ha de ser el més senzill i econòmic possible, ja que es necessiten 41580 unitats: el 75% de tots els BPMs de CLIC. ¿ - El processat de la senyal al sistema d'adquisició haurà de ser inmune a la interferència generada als PETS. Això exclou la solució habitual de processar les senyals del BPM a la freqüència de pulsacions del feix (12 GHz). ¿- La senyal de posició resultant del processat ha de ser capaç de detectar canvis a la posició del feix de durada igual o més gran que 10 ns (resolució temporal). ¿- La resolució espaial necessària és de 2 um per a un tub de buit de 23 mm de diàmetre. ¿- Ampli rang dinàmic: el sistema electrònic d'adquisició del BPM ha de poder processar senyals amb nivells extrems, induïdes per feixos de molt alt (100 A) i molt baix (3 A) corrent. / Benot Morell, A. (2016). Beam position monitoring in the clic drive beam decelerator using stripline technology [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/64067 / TESIS