Submitted by Geandra Rodrigues (geandrar@gmail.com) on 2018-03-23T12:51:48Z No. of bitstreams: 1 vinciuslagrotarodriguesdacosta.pdf: 1396401 bytes, checksum: cb024a49d0816c8df51709de3243f9be (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2018-03-23T13:03:30Z (GMT) No. of bitstreams: 1 vinciuslagrotarodriguesdacosta.pdf: 1396401 bytes, checksum: cb024a49d0816c8df51709de3243f9be (MD5) / Made available in DSpace on 2018-03-23T13:03:30Z (GMT). No. of bitstreams: 1 vinciuslagrotarodriguesdacosta.pdf: 1396401 bytes, checksum: cb024a49d0816c8df51709de3243f9be (MD5) Previous issue date: 2017-12-15 / Esta dissertação descreve o protótipo de um transceptor banda estreita (narrowband - NB) hybrid power line communication (PLC)/Wireless (NB hybrid PLC/Wireless), o qual utiliza a rede de energia elétrica e o ar, em paralelo, para transmissão de dados, visando aplicações de redes inteligentes (smart grid - SG) e Internet das Coisas (Internet of Things - IoT). Nesse protótipo é introduzida uma versão aprimorada e adaptada do padrão IEEE 1901.2, contemplando a subcamada de controle de acesso ao meio (medium access control - MAC) e da camada física (physical - PHY) para transmissão de dados por ambos os meios de comunicação. O aprimoramento é baseado no uso da transformada de Hilbert para a recuperação da informação em quadratura em ambos os canais, possibilitando a estimação do desvio de frequência entre os clocks do transmissor e do receptor. Uma das adaptações no padrão IEEE 1901.2 é a introdução do protocolo de roteamento, o qual possibilita o transceptor a se comunicar com nós a dois ou mais saltos de distância entre eles. A outra adaptação é a implementação de uma técnica de correção de pacotes com erro a nível de camada de enlace, a qual combina os pacotes com erros recebidos pelas interfaces PLC e/ou wireless e corrige-os, dentro de uma certa capacidade. Importante ressaltar que o transceptor NB hybrid PLC/Wireless é capaz de interoperar com o transceptor NB PLC baseados no padrão IEEE 1901.2. O protótipo do transceptor NB hybrid PLC/Wireless é implementado usando um dispositivo field-programmable gate array (FPGA) usando uma linguagem descritiva de hardware (hardware description language - HDL), buscando-se a economia de recursos de hardware. Os resultados numéricos discutem o tempo necessário para execução da técnica de correção de pacotes com erros, levando em consideração as restrições de tempo do padrão IEEE 1901.2. Além disso, uma análise de taxa de dados na camada PHY mostra que a implementação está de acordo com o padrão IEEE 1901.2 e pode perfeitamente satisfazer as necessidades de aplicações para SG e IoT. Ademais, a análise do uso de recursos de hardware e do consumo de energia mostram que o protótipo do transceptor NB hybrid PLC/Wireless demanda menos que uma vez e meia os recursos de hardware e o consumo de energia do protótipo do transceptor NB PLC. / This thesis focuses on a prototype of the so-called narrowband (NB) hybrid power line communication (PLC)/Wireless transceiver, which jointly uses power line and wireless channels, in parallel, for data communication related to smart grid (SG) and Internet of Things (IoT) applications. To build the prototype, it is introduced an enhanced and adapted version of the IEEE 1901.2 Standard to implement the medium access control (MAC) sublayer and the physical (PHY) layer to transmit data through both channels. The enhancement is based on the use of the Hilbert transform to recover the quadrature information from both channels, enabling to estimate the frequency deviation between the transmitter and receiver’s clocks. One adaptation in the IEEE 1901.2 Standard is the introduction of a routing protocol, which enables the transceivers to communication with nodes two hops or farther from each other. The other adaptation is the implementation of a packet error correction technique at the link layer level, which combines packets with errors received from PLC and wireless media and correct them, under certain constraint. Moreover, relevant is the fact that the NB hybrid PLC/Wireless transceiver is compatible with the NB PLC transceiver based on the IEEE 1901.2 Standard. The NB hybrid PLC/Wireless transceiver prototype is implemented in a field-programmable gate array (FPGA) device and details about the implementation, using a hardware description language (HDL), are provided, highlighting the pursuit of hardware resource savings. Numeric results discuss the time analysis of the packet error correction technique, calculating its maximum capacity of correction taking into account the IEEE 1901.2 Standard time constraints. Furthermore, a PHY layer data-rate analysis shows that the implementation agree with the IEEE 1901.2 Standard and can perfectly satisfy the needs of SG and IoT applications. In addition, the hardware resource usage and power consumption analysis show that the NB hybrid PLC/Wireless transceiver prototype demands less than one and a half times the hardware resource usage and power consumption of the NB PLC transceiver prototype.

Sustainably realizing applications of the future with high performance demands requires that energy efficiency becomes a central design criterion for the entire system. For example, the power consumption of the analog-to-digital converter (ADC) can become a major factor when transmitting at large bandwidths and carrier frequencies, e.g., for ultra-short range high data rate communication. The consumed energy per conversion step increases with the sampling rate such that high resolution ADCs become unfeasible in the sub-THz regime at the very high sampling rates required. This makes signaling schemes adapted to 1-bit quantizers a promising alternative. We therefore quantify the performance of bandlimited 1-bit quantized wireless communication channels using techniques like oversampling and faster-than-Nyquist (FTN) signaling to compensate for the loss of achievable rate. As a limiting case, we provide bounds on the mutual information rate of the hard bandlimited 1-bit quantized continuous-time – i.e., infinitely oversampled – additive white Gaussian noise channel in the mid-to-high signal-to-noise ratio (SNR) regime. We derive analytic expressions using runlength encoded input signals. For real signals the maximum value of the lower bound on the spectral efficiency in the high-SNR limit was found to be approximately 1.63 bit/s/Hz. Since in practical scenarios the oversampling ratio remains finite, we derive bounds on the achievable rate of the bandlimited oversampled discrete-time channel. These bounds match the results of the continuous-time channel remarkably well. We observe spectral efficiencies up to 1.53 bit/s/Hz in the high-SNR limit given hard bandlimitation. When excess bandwidth is tolerable, spectral efficiencies above 2 bit/s/Hz per domain are achievable w.r.t. the 95 %-power containment bandwidth. Applying the obtained bounds to a bandlimited oversampled 1-bit quantized multiple-input multiple-output channel, we show the benefits when using appropriate power allocation schemes. As a constant envelope modulation scheme, continuous phase modulation is considered in order to relieve linearity requirements on the power amplifier. Noise-free performance limits are investigated for phase shift keying (PSK) and continuous phase frequency shift keying (CPFSK) using higher-order modulation alphabets and intermediate frequencies. Adapted waveforms are designed that can be described as FTN-CPFSK. With the same spectral efficiency in the high-SNR limit as PSK and CPFSK, these waveforms provide a significantly improved bit error rate (BER) performance. The gain in SNR required for achieving a certain BER can be up to 20 dB. / Die nachhaltige Realisierung von zukünftigen Übertragungssystemen mit hohen Leistungsanforderungen erfordert, dass die Energieeffizienz zu einem zentralen Designkriterium für das gesamte System wird. Zum Beispiel kann die Leistungsaufnahme des Analog-Digital-Wandlers (ADC) zu einem wichtigen Faktor bei der Übertragung mit großen Bandbreiten und Trägerfrequenzen werden, z. B. für die Kommunikation mit hohen Datenraten über sehr kurze Entfernungen. Die verbrauchte Energie des ADCs steigt mit der Abtastrate, so dass hochauflösende ADCs im Sub-THz-Bereich bei den erforderlichen sehr hohen Abtastraten schwer einsetzbar sind. Dies macht Signalisierungsschemata, die an 1-Bit-Quantisierer angepasst sind, zu einer vielversprechenden Alternative. Wir quantifizieren daher die Leistungsfähigkeit von bandbegrenzten 1-Bit-quantisierten drahtlosen Kommunikationssystemen, wobei Techniken wie Oversampling und Faster-than-Nyquist (FTN) Signalisierung eingesetzt werden, um den durch Quantisierung verursachten Verlust der erreichbaren Rate auszugleichen. Wir geben Grenzen für die Transinformationsrate des Extremfalls eines strikt bandbegrenzten 1-Bit quantisierten zeitkontinuierlichen – d.h. unendlich überabgetasteten – Kanals mit additivem weißen Gauß’schen Rauschen bei mittlerem bis hohem Signal-Rausch-Verhältnis (SNR) an. Wir leiten analytische Ausdrücke basierend auf lauflängencodierten Eingangssignalen ab. Für reelle Signale ist der maximale Wert der unteren Grenze der spektralen Effizienz im Hoch-SNR-Bereich etwa 1,63 Bit/s/Hz. Da die Überabtastrate in praktischen Szenarien endlich bleibt, geben wir Grenzen für die erreichbare Rate eines bandbegrenzten, überabgetasteten zeitdiskreten Kanals an. Diese Grenzen stimmen mit den Ergebnissen des zeitkontinuierlichen Kanals bemerkenswert gut überein. Im Hoch-SNR-Bereich sind spektrale Effizienzen bis zu 1,53 Bit/s/Hz bei strikter Bandbegrenzung möglich. Wenn Energieanteile außerhalb des Frequenzbandes tolerierbar sind, können spektrale Effizienzen über 2 Bit/s/Hz pro Domäne – bezogen auf die Bandbreite, die 95 % der Energie enthält – erreichbar sein. Durch die Anwendung der erhaltenen Grenzen auf einen bandbegrenzten überabgetasteten 1-Bit quantisierten Multiple-Input Multiple-Output-Kanal zeigen wir Vorteile durch die Verwendung geeigneter Leistungsverteilungsschemata. Als Modulationsverfahren mit konstanter Hüllkurve betrachten wir kontinuierliche Phasenmodulation, um die Anforderungen an die Linearität des Leistungsverstärkers zu verringern. Beschränkungen für die erreichbare Datenrate bei rauschfreier Übertragung auf Zwischenfrequenzen mit Modulationsalphabeten höherer Ordnung werden für Phase-shift keying (PSK) and Continuous-phase frequency-shift keying (CPFSK) untersucht. Weiterhin werden angepasste Signalformen entworfen, die als FTN-CPFSK beschrieben werden können. Mit der gleichen spektralen Effizienz im Hoch-SNR-Bereich wie PSK und CPFSK bieten diese Signalformen eine deutlich verbesserte Bitfehlerrate (BER). Die Verringerung des erforderlichen SNRs zur Erreichung einer bestimmten BER kann bis zu 20 dB betragen.

No description available.

No description available.

No description available.

Submitted by Renata Lopes (renatasil82@gmail.com) on 2017-07-19T18:40:00Z No. of bitstreams: 1 victorfernandes.pdf: 1092306 bytes, checksum: 4a32aa04ed1256ce18768180de089629 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-08-09T12:20:45Z (GMT) No. of bitstreams: 1 victorfernandes.pdf: 1092306 bytes, checksum: 4a32aa04ed1256ce18768180de089629 (MD5) / Made available in DSpace on 2017-08-09T12:20:45Z (GMT). No. of bitstreams: 1 victorfernandes.pdf: 1092306 bytes, checksum: 4a32aa04ed1256ce18768180de089629 (MD5) Previous issue date: 2017-02-23 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Essa dissertação tem por objetivo mostrar os benefícios em termos de desempenho e confiabilidade de um modelo de canal híbrido de baixa taxa de dados que pode ser aplicado a smart grids e internet das coisas. Esse modelo é chamado de hybrid power line communication-wireless single-relay channel (HSRC), que consiste do uso paralelo e mútuo dos modelos single-relay channel baseado em transmissão de dados via rede elétrica e sem fio. Para mostrar os benefícios do mesmo, foi considerado que a posição do nó de retransmissão é variável, também foi assumida alocação de potência uniforme e ótima sob restrição de potência, bem como o uso de dois protocolos de cooperação: amplify-andforward (AF) e decode-and-forward (DF). Além disso, essa dissertação discute o modelo HSRC incompleto, que é caracterizado pela perda de um enlace de comunicação de dados ou uma interface de comunicação de um nó no modelo HSRC. Primeiramente, foi apresentada a formulação matemática no que tange a taxa de dados ergódica e probabilidade de outage dos dois modelos mencionados. Em seguida, foi realizada a análise numérica dos mesmos. Por fim, os resultados numéricos foram analisados e mostraram que tanto o HSRC quanto o HSRC incompleto têm performance melhores do que o single-relay channel baseado em transmissão de dados via rede elétrica ou sem fio para todas as posições do nó de retransmissão e protocolos de cooperação considerados. Também, os resultados mostraram que a posição relativa entre os nós de fonte, destino e de retransmissão impactam significativamente na taxa de dados ergódica bem como na probabilidade de outage. Ainda, foi mostrado o impacto da perda de cada enlace de comunicação de dados ou interface de comunicação de um nó (HSRC incompleto) quando a posição relativa do nó de retransmissão muda. Por último, é mostrado que a diferença de desempenho entre os protocolos de cooperação AF e DF reduz quando o modelo HSRC é utilizado e que a melhor posição para o nó de retransmissão é entre os nós fonte e destino em termos de taxa de dados ergódica. / This dissertation aims at discussing improvements of performance and reliability of lowbit rate data communication technologies applied to smart grids and internet of things. In this regard, a comprehensive analysis of the ergodic achievable data rate and the outage probability of the so-called low-bit rate hybrid power line communication-wireless singlerelay channel (HSRC) model, which jointly and in parallel uses power line and wireless channels for data transmission, is presented. In order to highlight the benefits of such hybrid channel model for the target applications when the relative position of relay node changes, optimal and uniform power allocations under sum power constraint, amplifyand-forward (AF) and decode-and-forward (DF) cooperative protocols are taken into account. Moreover, this dissertation discusses the so-called incomplete HSRC which is characterized by the loss of one data communication link or node communication interface in a HSRC. Numerical results show that the HSRC and incomplete HSRC remarkably outperform power line or wireless single-relay channels for all considered positions of the relay node and the chosen cooperative protocols. Furthermore, these results show that the relative distances among source, relay and destination nodes significantly impact the achievable data rate and outage probabilities. In addition, the impact of each missing data communication link or node communication interface (incomplete HSRC) when the relay position, relative to source and destination nodes, changes is quantified. Finally, but not the least, it is shown that the performance difference between AF and DF protocols reduces when the HSRC model is taken into account and that the best relay position is in the middle between source and destination nodes.

Submitted by Geandra Rodrigues (geandrar@gmail.com) on 2018-04-18T18:31:55Z No. of bitstreams: 1 mateusdelimafilomeno.pdf: 952346 bytes, checksum: 0eb883e1ceabb6c297f58be445761d84 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2018-04-19T13:28:21Z (GMT) No. of bitstreams: 1 mateusdelimafilomeno.pdf: 952346 bytes, checksum: 0eb883e1ceabb6c297f58be445761d84 (MD5) / Made available in DSpace on 2018-04-19T13:28:21Z (GMT). No. of bitstreams: 1 mateusdelimafilomeno.pdf: 952346 bytes, checksum: 0eb883e1ceabb6c297f58be445761d84 (MD5) Previous issue date: 2018 / Esta dissertação tem como objetivo discutir as comunicações cooperativas híbrida e não híbrida aplicadas a sistemas de comunicação de dados em banda larga e em ambientes residenciais. Nesse sentido, o modelo de canal com retransmissor único em dois estágios é investigado para sistemas de comunicação em banda larga através da rede de energia elétrica. Este modelo de canal cooperativo é formado pela concatenação de dois canais com retransmissor único, cobrindo enlaces de comunicação de dados com até dois saltos. Além disso, um modelo de canal híbrido com retransmissor único, utilizando rede elétrica e ar, é analisado para sistemas de comunicação de dados em banda larga em que enlaces de até um salto são considerados. Expressões de taxas de dados alcançáveis ergódicas são derivadas para os modelos de canais cooperativos híbridos e não híbridos, a fim de compará-los. Devido às características de canais e ruído das redes de energia elétrica, os resultados numéricos são baseados em um conjunto de dados constituído por estimativas de canais e medições de ruído cobrindo a faixa de frequência de 1, 7 a 100 MHz e diferentes posições do nó retransmissor. Para os canais sem fio, o modelo HIPERLAN/2 com a mesma largura de banda é utilizado, considerando uma freqüência central de 5 GHz, enquanto o ruído aditivo é considerado branco gaussiano. Com relação aos sistemas de comunicação através da rede energia elétrica, mostra-se que o modelo de canal com retransmissor único em dois estágios é a melhor opção quando o enlace da fonte ao destino encontra-se severamente degradado (por exemplo, alta atenuação de sinal devido à longa distância entre nós fonte e destino e/ou presença de ruído de alta potência). Quando a degradação do canal não é acentuada, o modelo de canal de dois saltos é mais apropriado. Acerca dos sistemas híbridos, constata-se que, quando o retransmissor está no meio do caminho entre fonte e destino, o modelo de canal híbrido com retransmissor único apresenta o melhor desempenho em termos de taxa de dados alcançável ergódica, enquanto o modelo de canal híbrido de um salto oferece os melhores resultados para outros casos. / This dissertation aims to discuss hybrid and non-hybrid cooperative communications applied to in-home broadband data communication systems. In this sense, the two-stage single-relay channel model is investigated for in-home broadband power line communication systems. This cooperative channel model consists of the concatenation of two single-relay channels, covering data communication links with up to two hops. Moreover, a hybrid power line/wireless single-relay channel model is analyzed for broadband data communication systems, considering one-hop links. Ergodic achievable data rate expressions are derived for both hybrid and non-hybrid cooperative channel models in order to compare them. Due to channel and noise characteristics of electric power grids, numerical results are based on a data set constituted by power line channel estimates and additive noise measurements covering the frequency band from 1.7 up to 100 MHz and different relay positions. For wireless channels, the HIPERLAN/2 model with the same bandwidth is used, but at a central frequency of 5 GHz, while the additive noise is considered to be Gaussian white. Regarding only power line communication systems, it is shown that the two-stage single-relay channel model is the best option when the source-to-destination link is severely degraded (e.g., high signal attenuation due to the long distance between source and destination nodes and/or high-power noise presence). When the channel degradation is not severe, the two-hop channel model is more appropriate. Concerning hybrid systems, it is observed that, when the relay is halfway between source and destination nodes, the hybrid single-relay channel model presents the best performance in terms of ergodic achievable data rate, while the hybrid one-hop channel model yields the best results for other cases.

The Masters thesis deals with dependence of quality parameters of malt on the temperature of mashing at sweet wort preparation. The theoretical part focuses on the technology of malt production including description of ingredients, production parts, some kinds of malt and the quality parameters. There is also described the technology of sweet wort preparation and the methods of determination of the malt quality parameters in the sweet wort there. The experimental part focuses on determination of malt extract, viscosity, haze, colour, time of starch cleavage, pH, degree of fermentation and beta-glucans content. Based on temperature dependence of parameters, the individual samples were compared and the effects of temperature were discussed. The biggest extract of light and caramel malts was explored at 70 °C, of coloured malt at 50 °C. The lowest viscosity of light and coloured malts was explored at 65 °C, of caramel malt at 50 °C. The lowest haze of wort was at 65 °C. Ideal colour of all malts was at all mashing temperatures. Ideal pH of all malts was explored at 70 °C. Ideal time of starch cleavage was explored at 70-85 °C. The biggest achievable degree of fermentation and the hugest increase of beta-glucans content were explored at 65 °C.

[pt] Os sistemas de múltiplas entradas e múltiplas saídas (MIMO) empregam um número crescente de antenas, o que leva a relevantes consumo de energia e custo de hardware dos front-ends correspondentes. Nesse contexto, o uso de conversores analógico-digitais (ADCs) de baixa resolução é promovido como uma solução promissora para este problema. Neste estudo consideramos um receptor MIMO de baixa resolução que implica que os sinais recebidos são processados simultaneamente pelos 1-bit ADCs e pela rede comparadora. Os sinais de entrada da rede comparadora podem vir de antenas diferentes, de modo que a extensão da rede comparadora pode ser interpretada como canais virtuais com saídas binárias. Com base nesses receptores MIMO de baixa resolução, desenvolvemos um estimador de canal e detector lineares de baixa resolução baseados no critério de mínimo erro médio quadrático (LRA-LMMSE) de acordo com o teorema de Bussgang. Duas redes de comparação são propostas, nomeadas, redes total e parcialmente conectadas. Também desenvolvemos uma rede parcialmente conectada baseada em busca gananciosa que usa muito menos comparadores para obter um desempenho bem próximo ao da rede totalmente conectada. Os resultados numéricos mostram que adicionar canais virtuais pode ser melhor do que adicionar canais físicos extras que correspondem a antenas de recepção adicionais em termos de taxa de erro de bit (BER). Além disso, ao empregar o estimador de canal proposto e seu erro de estimativa correspondente, construímos um limite inferior na taxa de soma ergódica para o receptor LRA-MMSE. Os resultados de simulação mostram que os sistemas com a proposta sistemas MIMO auxiliados por rede com quantização de 1-bit no receptor superam o convencional sistema MIMO de 1-bit em termos de desempenho de BER e erro quadrático médio (MSE). Além disso, as simulações numéricas confirmam uma vantagem significativa em termos de taxa de soma para o sistema proposto. / [en] Multiple-input multiple-output (MIMO) systems employs an increasing number of antennas, which leads to relevant energy consumption and hardware cost of the corresponding front ends. In this context, the use of lowresolution analog to digital converters (ADCs) is promoted as a promising solution to this problem. In this study we consider a low-resolution MIMO receiver which implies that the received signals simultaneously are processed by the 1-bit ADCs and the comparator network. The input signals for the comparator network can come from different antennas, such that the comparator network extension can be interpreted as virtual channels with binary outputs. Based on such low-resolution MIMO receivers, we develop low-resolution aware linear minimum mean-squared error (LRA-LMMSE) channel estimator and detector according to the Bussgang theorem. Two comparator networks are proposed, namely, fully and partially connected networks. We also devise a greedy search-based partially connected network that can use much less comparators to approach the performance of the fully connected network. Numerical results shows that adding virtual channels can be better than adding extra physical channels which corresponds to additional receive antennas in terms of bit error rate (BER). Furthermore, by employing the proposed channel estimator and its corresponding estimation error, we build up a lower bound on the ergodic sum rate for the LRA-LMMSE receiver. Simulation results show that the systems with the proposed network-aided MIMO systems with 1-bit quantization at the receiver outperforms the conventional 1-bit MIMO system in terms of BER and mean-square error (MSE) performances. Moreover, numerical simulations confirm a significant advantage in terms of sum rate for the proposed system.

Dans cette thèse, on s'est intéressé à l'étude des canaux de diffusion avec des contraintes de transmission pratiques. Tout d'abord, on a étudié l'impact de la contrainte pratique de l'utilisation d'un alphabet fini à l'entrée du canal de diffusion Gaussien avec deux utilisateurs. Deux modèles de canaux de diffusion sont considérés lorsqu'il y a, en plus d'un message commun pour les deux utilisateurs, (i) un message privé pour l'un des deux utilisateurs sans contrainte de sécurité (ii) un message confidentiel pour l'un des deux utilisateurs qui doit être totalement caché de l'autre utilisateur. On a présenté plusieurs stratégies de diffusion distinguées par leur complexité d'implémentation. Plus précisément, on a étudié les régions des débits atteignables en utilisant le partage de temps, la superposition de modulation et le codage par superposition. Pour la superposition de modulation et le cas général du codage par superposition, les régions des débits atteignables maximales sont obtenues en maximisant par rapport aux positions des symboles dans la constellation et la distribution de probabilité jointe. On a étudié le compromis entre la complexité d'implémentation des stratégies de transmission et leurs efficacités en termes de gains en débits atteignables. On a étudié aussi l'impact de la contrainte de sécurité sur la communication en comparant les débits atteignables avec et sans cette contrainte. Enfin, on a étudié les performances du système avec des schémas d'accusés de réception hybrides (HARQ) pour un canal à écoute à évanouissement par blocs lorsque l'émetteur n'a pas une information parfaite sur l'état instantané du canal mais connait seulement les statistiques. On a considéré un schéma adaptatif pour la communication sécurisée en utilisant des canaux de retour à niveaux multiples vers l'émetteur pour changer la longueur des sous mots de code à chaque retransmission afin que le débit utile secret soit maximisé sous des contraintes d'"outages". / In this thesis, we aim to study broadcast channels with practical transmission constraints. First, we study the impact of finite input alphabet constraint on the achievable rates for the Gaussian broadcast channel with two users. We consider two models of broadcast channels, when there is in addition of a common message for two users, (i) a private message for one of them without secrecy constraint (ii) a confidential message for one of them which should be totally hidden from the other user. We present several broadcast strategies distinguished by their complexity of implementation. More precisely, we study achievable rate regions using time sharing, superposition modulation and superposition coding. For superposition modulation and superposition coding strategies, maximal achievable rate regions are obtained by maximizing over both symbol positions in the constellation and the joint probability distribution. We study the tradeoff between the complexity of implementation of the transmission strategies and their efficiency in terms of gains in achievable rates. We study also the impact of the secrecy constraint on communication by comparing the achievable rates with and without this constraint. Finally, we study the system performance using HARQ schemes for the block-fading wiretap channel when the transmitter has no instantaneous channel state information but knows channel statistics. We consider an adaptive-rate scheme for the secure communication by using multilevel feedback channels to change sub-codeword lengths at each retransmission, in order to maximize the secrecy throughput under outage probabilities constraints.